Can't create mailbox & user in a specified domain

Hello,
I can't select the domain I want when I create a mailbox for a new user in Exchange 2013 EAC.
I have a single forest with 1 root domain : toto.local, and 2 child domains infra.toto.local, ressources.toto.local. Exchange server is in ressources.toto.local with all my servers ans all my users are under infra.toto.local. There is a two-way and transitive
trust between (infra.toto.local and toto.local) and between (ressources.toto.local and toto.local)
Before installation of echange I do a setup /PrepareAllDomains
When I want to create a mailbox for a new user, the only choice I have for the user session name domain is toto.local.
Do I missed or misunderstood something ?
Thanks

Hi,
Thank you for your answer Terence,
I have defined 2 accepted domains : infra.toto.local (Authoritative) and
toto.com, my external domain name (Authoritative and default).
I created 2 email address policies : One for
toto.com ([email protected]) priority 1 for all recipients and the other one for
infra.toto.local ([email protected]) priority 2 for all recipients.
But even now, when I want to create a new mailbox user from exchange eac, the only domain suffix I can choose for logon is
toto.local. I had to go to AD Users & Computers to change user session name to
infra.toto.local
Thanks for your help.

Similar Messages

Can't create Exchange users in a new child domain

Hi,
i have an Exchange 2010 SP3 ( 1 CAS/Hub + 1 mailbox) server running in a parent domain. Few days ago i've created a new child domain, but i can't create mailbox for users coming from this new child domain.
The error message says that i don't have enough rights to do this operation (can't copy the error, translation from frecnh will be a disaster :p )
That's what i get :
Réponse d'Active Directory : 00002098: SecErr: DSID-03150BB9, problem 4003 (INSUFF_ACCESS_RIGHTS), data 0
I'm doing this with my parent domain administrator.
I've read that the exchange infra had to be prepared for all domains with command
setup.com /PrepareAllDomains
is it possible with an existing exchange?
Thanks for your replies

Yes, you need to prepare any domain that will have mail-enabled accounts in it.
You can run this for a specific domain:
setup /PrepareDomain:<FQDN of domain you want to prepare> to prepare a specific domain.
Its safe to run this in an existing Exchange org.
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

I have multiple devices (imacs, lap tops and ipads) all connected to a NAS server. Can I create a user for myself and one for my wife, and each have our own apple ID, and Itunes accounts, but all share the same media on NAS drives?

I have multiple devices (iMacs, Lap tops, Ipads) all connected to a Nas Drive. Can I create a user for myself and one for my wife and we each have our own apple ID's, Itunes etc, but share the same data on the hard drives? So when she logs in, and sync's her ipads, they will sync with her stuff and when I do the same under my user account, on the same device, my ipads will sync with my stuff?

You can share the same Apple ID for purchasng form the iTunes and app stores without any problems, but you should all used separate iCloud accounts with separate Apple IDs. (You are not required to use the same ID for iCloud and other services as you do for the iTunes store.) This will prevent you from ending up with merged data. You should also use separate Apple IDs for iMessage and FaceTime or you will end up getting each other's text messages and FaceTime calls.
This article may be of interest: http://www.macstories.net/stories/ios-5-icloud-tips-sharing-an-apple-id-with-you r-family/, as well as this video: http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l.

Can't create new users after GroupWise is moved from NetWare to Linux

Hi,
I moved GroupWise (Version 6.5 SP 6, single domain and single office)
from NetWare 6.5 server to SUSE Linux Enterprise server 9. It seems the
GroupWise server is running oaky. Existing users are able to connect
their mail box and send and receive messages. But I can't create new
users on the GroupWise server.
I used ConsoleOne installed on the Linux server to create new GroupWise
users. It seemed that I was able to do it. The new users appear on the
NDS and the GroupWise File IDs were assigned for these users. And I was
able to add these new users to distribution lists. But the users DB
files (userXXX.db) were not created under /grpwise/po/ofuser on the Linux
server and they cannot connect to the server. Old users cannot find them
in Novell GroupWise Address book.
Does anyone how to fix the problem?
Thanks in advance!
Jinkang

Hi,
[email protected] wrote:
>
> Hi,
>
> I moved GroupWise (Version 6.5 SP 6, single domain and single office)
> from NetWare 6.5 server to SUSE Linux Enterprise server 9. It seems the
> GroupWise server is running oaky. Existing users are able to connect
> their mail box and send and receive messages. But I can't create new
> users on the GroupWise server.
>
> I used ConsoleOne installed on the Linux server to create new GroupWise
> users. It seemed that I was able to do it. The new users appear on the
> NDS and the GroupWise File IDs were assigned for these users. And I was
> able to add these new users to distribution lists. But the users DB
> files (userXXX.db) were not created under /grpwise/po/ofuser on the Linux
> server and they cannot connect to the server. Old users cannot find them
> in Novell GroupWise Address book.
>
> Does anyone how to fix the problem?
This clearly sounds like your domain (which is the part of groupwise
which you admin against) doesn't/can't talk to the postoffice, so the
change you made (to the domain) does never get to the PO (which is where
the addressbook of your other users come from, and is what is
responsible for creating the user DB). This seems very likely to be
caused by your move not being done properly, and old information (either
path or IP address) for the PO still being in the domain and/or domain
database.
So how's the domain linked to the PO?
CU,
Massimo Rosen
Novell Product Support Forum Sysop
No emails please!
http://www.cfc-it.de

Error in installing BAM, can not create orabam user

Hi all,
I tried install Oracle BAM and always getting the same problem. Error at creating orabam user.
Any idea?
Afonso

hi all
having same problem
i can cannot create orabam user
my oracle home is set
i have also set my path ahead of oracle home
C:\OracleBAM\ClientForBAM\bin in environmental variable..
i can login into my database as sysdba also
but when screen goes to create ORABAM USER it gives me the error cannot create the user
kindly help pls
CHeers

Newbie : How can i create 2 users with the same name on diff domain name ?

I have two domains on my server
exemple1.com
exemple2.com
and i want to create one user for each domain with the same name
[email protected] and [email protected]
curently i can create one user, and it's the same user for both domains :-/
how ?
thanks
Hète

I must say. I am equally curious about this. i've played a lot in Communigate and it is easy to do there but how does one do this in apple mail?

Can I create a User with Root Privileges but without UID Zero?

Dear all,
I'm working on this project and this is the task required: Create a user and let this user perform all that the ROOT user can perform but shouldn't have UID 0. I'm sincerely new to this task but I challenged myself and made so many search on Google and this is what I was able to do.
1. I created a user --- testuser1
2. I created a role --- advrole
3. I added the Solaris predefined profile -- Primary Administrator Profile to the role advrole and added this role to the user testuser1.
4. I logged out from root and login with the newly created user i.e. testuser1.
5. I ran the command id and the user - testuser1 still has its UID defined by me when I was creating the user account (which is good as far as my task is concern).
6. In order to perform ROOT tasks when logged in with testuser1, I use su - advrole.
7. I can now do all that ROOT can do but whenever I run the id command, the advrole shows UID 0 (WHICH IS BAD FOR ME AS PER MY TASK).
My question is, I need to tell the customer that what they actually want isn't feasible in Solaris and the above is closer to what they want but I need to be sure if it's feasible or not before telling my customer?
Can anyone tell me if it's feasible and if so, how can it be done? Or if the way I did it is the only way, kindly let me know as well so that I can get back to them with a valid and concrete explanation.
P. S. The customer requires this because when doing auditing, their auditing software tracks users based on UID so therefore if every user will login and su - root, all will appear as done by the ROOT user because of the UID and a particular will not be held responsible.

If you use auditreduce and praudit, you can get the information you need. It will show, as in my example below, that I logged in via SSH, and then switched to root after logging in. This information can be easily scripted and I do so every day in my daily report so I can see who logged in and who switched to root.
Logging in via ssh:
header,69,2,login - ssh,,MYSYSTEM,2010-06-03 09:15:15.151 -07:00
subject,myusername,myusername,mygroup,myusername,mygroup,11435,512647774,15097 65558 MyIP
return,success,0Then switching to root:
header,94,2,su,,MYSYSTEM,2010-06-03 09:15:21.100 -07:00
subject,myusername,root,mygroup,myusername,mygroup,11448,512647774,15097 65558 MyIP
text,success for user root
return,success,0It also indicates the session ID for the SSH session, so I can monitor when that session ended too.
A different session logging in and out via SSH -
header,69,2,login - ssh,,MYSYSTEM,2010-06-03 09:16:19.380 -07:00
subject,myusername,myusername,mygroup,myusername,mygroup,11451,3474846213,15097 131094 MyIP
return,success,0
header,69,2,logout,,MYSYSTEM,2010-06-03 09:16:51.452 -07:00
subject,myusername,myusername,mygroup,myusername,mygroup,11451,3474846213,15097 131094 MyIP
return,success,0

How can I create a user with rights to install packages on a publish instance?

Hi,
I am trying to create a user with the rights to upload and install content packages on a CQ publish instance and I do not wish to use the admin user. Simply adding a new user to the administrators group does not seem to be enough.
I tried adding a rep:GrantACE node through crx de/explorer but it reported the node as locked. I was able to upload a content package that removed the rep:DenyACE jcr:read for everyone, but this is not safe it seems.
Is there some special privilege that I need to add to my user/group that will allow them to access the /etc/packages tree or do I just need to add some permission somewhere within the tree.
Regards,
Chris

With some help from David Collie, Alex Klimetschek & Jörg Hoh I have a better idea of what is going on and we've found a solution.
It seems that the admin account always works in these scenarios as it has special privileges in the CRX security system; admin can do anything it likes.
Instead of creating the rep:GrantACE nodes directly, I was able to add a new ACL entry for the administrators group to /etc/packages via the Access Control Editor (http://localhost:4502/crx/explorer/ui/aceditor.jsp?ck=1373027669916&Name=acEditor&Path=%2F etc%2Fpackages&_charset_=utf-8).
Strangely, the administrators account already had some inherited rights on this directory that were overridden by the deny|everyone|jcr:read ACL entry on /etc/packages node. Adding allow:administrators|jcr:read gives any member of that group access to read and write to the /etc/packages. directory.
Now that I have setup this user we can setup a deploy step in out CI build that does not rely on using the admin account.
Thanks
Chris

Can't create mailboxes in iOS6 Mail

I found the following in another thread, but it doesn't work for me. Don't know why.
Go into Mail app, click the back button in the upper left hand corner under you see all your mailboxes.
If its an IMAP account, you will also see a section under all your inboxes, go into there, and click EDIT.
Create anew mailbox button appears at the bottom (iOS6)
I have an iPad4 with multiple eMail accounts, some IMAP, one of them POP. Following the above instructions, there's an EDIT button to the right of the word "Mailboxes". Clicking on it it changes to "Done" but nothing else changes on the screen. Clicking on any of the right arrows next to any of the accounts produces an EDIT button that presents three buttons at the bottom, "Delete," "Move," and "Mark." The Move button gives me the option to put it in the Trash. I'm missing something.

To create a screenshot - hold down on the sleep/power button and while holding down on it - tap and hold down on the Home Button until you see the screen flash white and you hear the sound of a camera shutter go off. The screenshot will be automatically saved to the Camera Roll of the Photos App.
Let me preface my steps here with this .... Gmail on the iPad works a little bit differently than other email accounts. Gmail has an archive option for one. What I am describing here should work with an IMAP email account on your iPad.
Launch the Mail App and go to the Mailboxes view - the view where you can see all of your email accounts. Select your email account here.
In the next window - you should see an Edit Button at the top of the window next to the name of the email account. Tap on the Edit Button.
After you tap Edit - you should see a New Mailbox Button at the bottom - Tap New Mailbox.
The you will see a window where you can Name the Mailbox and Save the new Mailbox. Name the mailbox. You can choose the location of the new mailbox with some limitations - experiment with it and see what works for you. Then tap on the Save Button at the top.
When you are finished - tap the blue Done Button at the top of the window that you see in the 3rd screenshot.

Can't create new users in Administration Services Console

Hi,
I am following directions in the Essbase DBA guide for creating new users, as it says you must create a partition user to work with Samppart and Sampeast applications. It tells me to log on to Administration Services Console, go to the Administration Server, and right-click on users to create a new user. However, when I right-click, the option to Create New User is light grey and not clickable, neither is the option to refresh users. Can anyone tell me why I can't create a new user? I am logged in with the username: admin password: password that I set during configuration and that should be the Administrative account.

Hi,
What version are you using? If it is 9 then you need to create the user in shared services. I just checked and the option to create a user is greyed out for me too and I am an admin.
It sounds like you haven't externalised the users which is why the option to do a refresh is not there.
Thanks,
Nathan

Can I create a User Registration System in Adobe Muse?

Hello community!
I was wondering if I can create a User Registration System in Adobe Muse? I do NOT use Dreamweaver, and I know Dreamweaver can do it. I am not a coder, but there are plenty of tutorials online for me to follow step-by-step. I just can't seem to find anything for Muse.
Since Muse has Insert HTML, I was wondering if anyone has figured out a way to create a User Login and Password protected page.
Thanks!
Joe~

Hi,
There are multiple threads in this issues
Login page using Muse and BC
Re: Is there a way to make private (members only) areas through muse?
Re: Can I create a login/password protection in Muse for a HTML5 page or two?
How do I create a password protected entrance page for a muse site?
Do let me know if you have questions further.

Can I create administrator user in OIM

Hi
Can I create a new Administrator user in OIM?
What I mean by Administrator user is, It should be able to do all operations which "XELSYSADM" user can do.
Thanking You
Kiran Thakkar

In OIM access rights are not at user level. Instead they are at group level. xelsysadm is a special predefined user that belongs to SYSTEM ADMINISTRATORS group and hence he has access to everything. Similarly any user you create and make a member of SYSTEM ADMINISTRATORS group will have all access same as xelsysadm

Can't create the user that was deleted by me previously on web.

1. first, i create one user named "test1", and i can logon using it successfully.
2. then, i delete it in RPD;
3. third, i search out the user "test1" on web and delte it:
Settings –> “Oracle BI Presentation Services Administration”–>”Manage Presentation Catalog Groups and Users”
search out the user "test1" on web and delte it.
4. re-create the same name user "test1" in RPD.
5. but now , i can't logon successfully. after input the correct user/pwd, the page show:
access denied for user to path /users/test1/_portal.*
Error Details*
Error Codes: O9XNZMXB*
帖子经 854623编辑过

check these will be helpful BI Dashboard - access denied for user to path /users/administrator/_portal/
http://obiee-blog.info/administration-tool/error-access-denied-for-user-to-path/
Cheers,
KK

Can't create mailboxes after E52 firmware update t...

Hi everybody
After updating firmware of my E52 to version 083.001 I was unable to recreate any kind of mailbox using the wizard provided by nokia email
This is what I done:
backup of my contacts and messages with new Nokia Suite (v. 3.2.98)
deep reset of my E52 (code *#7370#)
updated firmware to 081.003 with nokia suite
another deep reset using code *#7370#
I restored contacts and message with nokia suite (by the way .. nokia suite was not able to restore messages!)
I tried recreate mailboxes using nokia email v. 3.21.0, when creating mailboxes (ovimail, gmail hotmail) with the wizard, after typing mailbox and pwd it always says:"Unable to create mailbox" !!!!
Has anybody faced this problem
Solved!
Go to Solution.

Hi MarcoB1,
Sorry to hear the frustration you have been having since your update. Have you tried visiting http://email.nokia.com on your nokia browser, then download and replace the nokia messaging app?
Alternetively could you follow these steps and report back if it works:
Start the normal process by clicking create new mail box
The terms will be shown
Select start, which will say preparing for setup
It will ask for which connection to continue setup...( gprs connection select to always ask)
CANCEL THE SETUP.
Message will pop up saying unable to contact the server.
Automatically a box will appear with the symbol '@'
Type in any [email protected]
any [email protected]
(do not give your actual email id yet)
Next page
Check the account name
Goto server type and select IMAP4 instead of POP3
Incoming mail server
for yahoo
imap.mail.yahoo.com
outgoing
smtp.mail.yahoo.com
For gmail
Incoming
imap.gmail.com
Outgoing
smtp.gmail.com
Save this setting and the mailbox will be created
once created select options goto settings/mailbox settings
Correct the account details
Enter correct email ID
Goto advanced settings at the bottom > Incoming settings
Correct the email ID for the outgoing and check to see if all details are correct.
Now go back and connect, but select the gprs connection
Hope this helps or at least aids you in solving your issue.
Regards,
haZey
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

How can I create new user in such that its entries are stored both in profile server and ldap?

Portal only creates a user profile locally within its native ldap server. Two ways you can approach this is to either write a custom auth module that creates a user in the ldap server at the same time or handle it through replication.

Can't create mailbox & user in a specified domain

Similar Messages

Maybe you are looking for