Can't enable eax effects in game with entertainment mo

When I use creative alchemy and have my panel thing set for gaming mode the eax will stay highlighted in my ravenshield game. But when I try to use entertainment mode for the bass/ treble percents to work the eax is always greyed out. Any ways to fix it'sMessage Edited by MercenaryKnight on 06-04-200709:09 PM

No, thats why you must use "GAME" mode when "GAMING".... Its a no-brainer...

Similar Messages

  • Is there any way how i can download and run Window based games, with out installing Windows-thus Bootcamp? and if so, is it free?

    is there any way how i can download and run Window based games, with out installing Windows-thus Bootcamp? and if so, is it free?

    No, you must install Windows to run Windows software. You do not need to use Boot Camp (yes, it's free because it comes with OS X.)
    Windows on Intel Macs
    There are presently several alternatives for running Windows on Intel Macs.
    Install the Apple Boot Camp software.  Purchase Windows XP w/Service Pak2, Vista, or Windows 7.  Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows.  Boot Camp enables you to boot the computer into OS X or Windows.
    Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7.  Parallels is software virtualization that enables running Windows concurrently with OS X.
    VM Fusionand Windows XP, Vista Business, Vista Ultimate, or Windows 7.  VM Fusion is software virtualization that enables running Windows concurrently with OS X.
    CrossOver which enables running many Windows applications without having to install Windows.  The Windows applications can run concurrently with OS X.
    VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris.  It is not as fully developed for the Mac as Parallels and VM Fusion.
    Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc.  There are performance differences between dual-boot systems and virtualization.  The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
    You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

  • How Can I Enable cookies on my PC with windows 7?

    How Can I Enable cookies on my PC with windows 7?

    Hello oguiyke, cookies are enabled by default in Firefox, see: [https://support.mozilla.org/en-US/kb/enable-and-disable-cookies-website-preferences#os=win7&browser=fx23 Enable and disable cookies that websites use to track your preferences]
    also :
    http://kb.mozillazine.org/Websites_report_cookies_are_disabled
    https://support.mozilla.org/kb/Cookies
    thank you

  • EAX issues in games with Audigy SE, one way or the ot

    Hello everyone. I hope I'm asking for help in the correct forum. If not, please forgive my noobishness. =)?I don't know what's wrong, but EAX in Bioshock has terrible issues. I have XPx64 SP2, Audigy SE and when my corvette was new, I obtained SoundBlaster drivers specifically for x64 from April 06. But these were terrible. In many games (f.e. FEAR) the sound was terribly distorted after a while with unbearable loud mechanic buzzing. I had a serious issue in Oblivion as it was rebooting my computer when I was loading a game and it took me a while until I realized that the x64 drivers are causing it. I got rid of them and installed reference drivers I bought on CD with the card and everything was fine. Now Bioshock came out. Overall the EAX works good in it, but I have some serious crackling. I tried to lower the sound channels/streams values in INI, but it didn't remove crackling. So I though I would update drivers again. Indeed, Creative has released unified drivers for XP and Vista last July. I installed them, launched Bioshock with EAX ON, loaded a game and ... AARGH, my ears! The sound was like zapping loudly and rapidly, a real acoustic horror. This means I have serious EAX issues with all newer drivers than the reference ones on CD, but even with the new ones I have crackling in Bioshock anyway, with addition of the audio distortion. I have tried to turn off EAX and use CMMS3D instead, with Reverb which doesn't seem to cause any problems in BS. The sound was deep and rich, except that the crackling and stuttering is still there!?No flawless sound for me. Is my Soundblaster physically borked or something... =(?

    Well, I know that with SE, EAX processing is left for the CPU. You think this would be the source of problem?
    I have no option to select from software or hardware mode in games' audio menu, devs normally don't do add that option to audio menus (at least I never seen it in any game yet). In games I can normally only select whether I want EAX or not, or just like in case of BioShock, whether I want to turn Reverb on or off, and it would be left for the drivers to call the CPU to process EAX.Message Edited by RogueKeeper on 0-6-200707:5 AM

  • Can i use this to record games with windows 7

    hey guys i want to know if i can use a Pinnacle Systems - Dazzle Digital Video Creator Plus with windows 7 64 bit i want to record ps3 games
    Solved!
    Go to Solution.

    Yes you can! The box may not mention Windows 7 but it does work. Now it may not be the best video quality if you're trying to go HD, because you're using analog hookups thru a USB, but it will preform the task you have described. There are some complaints on Best Buy's website, but my experience says it's probably user error.
    .-**Click the star under my name if this information helped! TY!**-.
    .-**Click the Solved button if this answered your question!**-.

  • How CAN we reinstall the Scrabble free game with the new IOS 7.1.2 ?  It is no longer working even if I cancel the actual version and reinstall it.

    I Have iPad retina.  With the new iOS 7.1.2 my Scrabble free game no longer works.  What should I do ?  I try to reinstall it but they download the version from my Icloud wich is not working.
    SOmebody can help here ?

    Unfortunately, if the iOS 7.1.2 has broken the app then it's up to the app developer to fix it.
    You can look at the reviews. If the update has broken the app then the reviews will reflect that and you can at least know it's not just you.

  • Can't enable recording for Audio tracks with H2 Zoom

    I'm running Logic Express 7 on a Macbook Pro Intel.
    I used to record vocals with the H2 Zoom as an external mic. But since I ran an update on Logic, I can no longer enable recording for Audio tracks for recording as soon as I connect the H2.
    Interestingly, it let's me only choose an H2 output driver.
    Connecting the same device to Garageband I can choose both, H2 output driver and H2 input driver.
    Anyone else facing this problem? Advice is greatly appreciated.

    You have to set it up using the aggregate device editor (utilities folder). In the utilities folder open AUDIO MIDI setup. From the menu select Audio>Open Aggregate device editor. Add a new aggregate device and name it zoom. Selelct H2 auidio in and H2 Audio out. Check the clock next to H2 Audio out only. Make the Zoom aggregate device you just created your default input in the systems setting area of the audio midi setup form. Close Audio Midi Setup and return to Logic. You may need to restart logic. You should now see "Zoom" in Preferences>Audio> Core audio> Device and you should be able to record using the H2.
    Hope this helps

  • How can I enable 16 outs from Logic with Intel Mac Pro?

    Hi everyone,
    I am a bit new to the digital output world! I have a Digi002 with Logic 7 and I have a Behringer A/D converter box to recieve digital output using optical cable. My question is this: I can only see 8 normal stereo outputs plus additional 9-10 output. Is there a command in Logic (as per the old "enable 16 in/outs in 5.5)to allow the greyed out extra outputs to work? or I am being very stupid and not enabling some command on the Mac?
    I thank you all in advance for any kind responses!

    I see you're using a Behringer A/D converter. I had one of these once. It made a lot of noise: crackling, pops etc. I know that was the cause as they only happened on those 8 tracks.
    I may have had a lemon, but if you get similar problems, (and I hope you don't) I have changed to the Alesis AI3 and now have no problems, it might be worth you making a mental note.

  • Can't Enable write cache on disk with event ID 34

    One of our clients has a performance issue similar this one:
    Performance issue on TS as VM - Resolution with screenshots
    After monitoring it we found the problem is write cache. We improve the
    ... I
    checked all other VMs, the Enable advanced performance is unchecked. Do you
    ... A: To improve the performance for the disk, here are some proactively action
    plans:.
    www.chicagotech.net/remoteissues/tsperformance1.htm
    However, when we follow the resolution to Enable write cache, it doesn't take it with this event:
    Event Type: Warning
    Event Source: Disk
    Event Category: None
    Event ID: 34
    Description:
    The driver disabled the write cache on device \Device\Harddisk0\DR0.
    How to fix it?
    Bob Lin, MCSE & CNE Networking, Internet, Routing, VPN Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net How to Install and Configure Windows, VMware, Virtualization and Cisco on http://www.HowToNetworking.com

    Hi,
    By default, write caching is disabled on a disk that contains the Active Directory database (Ntds.dit). Also, write caching is disabled on a disk that contains the Active Directory log files. By doing this, you enhance the reliability of the Active
    Directory files.
    Thus if it is a DC, try to move the Active Directory database and the Active Directory log files off of a disk in which you need to enable write caching.
    If you have any feedback on our support, please send to [email protected]

  • Why i can't buy anything from my games with my redeemed dollar? Isn't it possible? Can anybody help me!!!, Why i can't buy anything from my games with my redeemed dollar? Isn't it possible? Can anybody help me!!!

    I redeem 10$ . I can buy app from app store but i can't buy any thing from my games. Such as i play hay day games and i want to buy some diamond by this dollar. But i can not buy. Why?? Pls some one tell me.

    What happens when you try?
    Some countries charge tax that is not included in the iTunes/App store listed price.

  • Can you play a 2 player game with 2 bluetooth devices on an iPad? Will it support it?

    I'm looking to play some two player games, but wondering if it's possible to hook up a bluetooth controller instead of using an iPhone or something as a controller.
    Thanks!

    That woud be entirely dependant on the game rather than the iPad.
    If the game supports any kind of external input device or not via bluetooth.

  • Can I gift my friend a game with prepaid credit?

    I have $50+ of prepaid credit which I received from a prepaid card, but when I try to gift my friend, It only allows for me to use a credit/debit card. Is there a way to gift a game using this prepaid credit?

    No.
    (113815)

  • Can't enable hardware sounds/EAX in some ga

    Hi all,
    I have X-Fi Xtreme Music card and I've noticed that in some games, e.g. F.E.A.R., that I can't enable the EAX options and/or the hardware mixing. I've noticed this in several other games as well.
    Suggestions?

    gonemad wrote:
    if you run windows xp 64 and have more than 3 GB of ram.. EAX cant be enabledi get around this by using the /MAXMEM switch and set it to 3 gb.. which makes EAX work fine
    I didn't know that... I'm running x64 with 4 gigs of RAM which explains things. A number of other games have this same problem...can't enable EAX options or hardware mixing. Thanks for the info.

  • [SB Audigy 2] Enabling Audio Effects in EAX Console No Sound in Games.

    K[SB Audigy 2] Enabling Audio Effects in EAX Console > No Sound in Games.7 Subject says it all.
    Got an SB Audigy 2 from a friend, installed the latest drivers. Enabled the Audio Effects in the EAX Console ('Advanced EQ > Pop' to be more specific) Music sounds great and all, but most games I play will have no sound. Disabling the effects returns the sound. Only happens with games that use EAX btw, obviously. I would really like to be able to play games with the improved sound.
    Is this suppose to happen? I've tried the unnoficial drivers as well, no difference.
    Thanks in advance.

    ORe: [SB Audigy 2] Enabling Audio Effects in EAX Console > No Sound in Games.g Man oh man, why didn't I try that myself.. It works, I will now sculpt a small statue of JRosenfeld<span class="lia-user-name UserName">, place it in my garden and pray there before each gaming session.. Thanks!! =)

  • Best EAX Effects with SB Audigy 2 ZS and Headset?

    Best EAX Effects with SB Audigy 2 ZS and Headset?Hi,
    I have reinstalled Windows XP SP3 lately and installed just the Audigy_SupportPack_3_8 as driver for my Audigy2 ZS. I have a Sennheiser PC50 headset.
    Now I can't get EAX to work.
    The EAX setting in game is enabled and it sounds different than without it but I can only distinguish left from right but not top from bottom and front from rear.
    Am I lacking any driver component?
    How do I setup the audio device in Windows? Headphones or 4 speakers?
    Do I need CMSS 3D? CMSS or CMSS2? Even if the game supports EAX?
    What about optimize 3D-Effects for headsets? I use a headset, so I should enable it's
    And also I can't find the suround mixer, is this not included in this support pack?
    I mean this one:
    Best Regards
    sanni

    Re: SB Audigy 2 ZS and Windows 7 - Full Package driver?T While Creative has written new drivers and some applications for Windows 7/Vista for the Audigy, they have not re-written or updated all of the original applications on the CD. This card is very old now. What Daniel K. did was take all of the applications or most of them, and tweaked them to properly install and include themselves in the registry on operating systems other than Windows XP. For the full and most recent package, check here:
    http://forums.creative.com/t5/Sound-...009/td-p/53838
    If the application you want is not included in his package, then you can try downloading the official Creative version and install it on your system in "compatibility mode" by right clicking the file, and choosing properties, and then the compatibility tab and choosing "Windows XP service pack 2 or 3" and it may or may not function.

Maybe you are looking for

  • Iscsitarget installation fails on Windows 2008 R2 server

    Dear All We have windows 2008 Server which is also DC server. I am trying to install iscsitarget utility which I downloaded from Microsoft site. I want to configure the server as iscsi target and map the disk space to another server as disk volume. T

  • MacBook Pro boots up really slow

    Hello everyone! I have a couple of issues with my MacBook Pro and I was hoping someone could help me. It's about a mid-2010 i7 2.66 GHz MacBook Pro, 8 GB ram, running Mavericks. The problem is as follows: My MacBook takes between 3 and 6 minutes to b

  • N97 Picture quality (colour issue)

    Hi, when i take pictures with the camera on the N97 the picture quality seems to be getting worse. There seems to be a lack of colour in any of my pictures now, like if you went into photoshop and reduced the colour, thats the outcome im getting now

  • Iphoto 8.1.2 crashes after opening- kern protection failure? it started after Ipad 2 use

    My Iphoto wont stay open since I started using my ipad2, the library is intact but the program crashes? solutions?

  • How do I connect PeriMed Laser Doppler unit to LabView

    I am trying to connect a Laser Doppler unit to a AD-converter box for data acquisition on LabView 6.0. What cables are used to connect to the A/D I/O connectors on the BNC 2120. Thanks