Can't export to Quicktime in proper aspect ratio.

I'm working on a project with a:
-Canon XL2
Set to:
-16:9 SD
-24p 2:3:3:2 Pulldown
Capture Preset:
-DV NTSC 48 kHz Advanced (2:3:3:2) Pulldown Removal Anamorphic
Sequence Preset:
-DV NTSC 48 kHz - 23.98
When I try to export to Quicktime it smashes the image from the left and right. The Quicktime window appears to be displaying a 16:9 aspect ratio, but for some reason it distorts the image and places black bars on both sides. Does anyone have any idea what kind of export settings I should be using for this? If you need more info to answer my Q. just ask...I will be monitoring this post closely.
thanks,
iMac G5 Mac OS X (10.4.6) 2.0 GHz, 400Gb Hard Drive, 2Gb Ram, 250Gb External

I've tried exporting in several different ways. My first attempt was just the obligatory Export: Quicktime: Current Settings. Then I played around with the various settings to no avail. Unfortunately, I'm really not sure what the difference is between exporting to Quicktime and using Quicktime conversion. I also don't know the difference between 23.98, 24@25, and 24. Maybe if I understood the settings it would be easier to figure out.

Similar Messages

FCP export to "QuickTime Movie" distorts aspect ratio of all text, displays video correctly.

Hi you all,
My name is Alexander, I'm from Belgium.
I'm working on Final Cut Pro 6.0.6, on a MacBook Pro with a 2.53 GHz Intel Core 2 Duo Processor, running version 10.7.2 of Mac OS X (Lion).
I'm editing a 'making of' of a Flemish feature film. I shot this 35 minute documentary short with my own Canon HDV-camcorder (XH-A1). The Final Cut Pro-project is stored on an external hard drive (1 TB LaCie Minimus).
I've been doing exports to "QuickTime Movie" for years now, without any problems, but since a week or two, FCP started messing up the titles over the video - and the titles only. Their aspect ratio is messed up once exported, but they look just fine in the FCP Timeline (in Viewer, I can verify that the aspect ratio of the titles is always "0"). I'm trying to export this to "HDV - 720p25".
Here's a comparison between the two:
As you can see: the MOV has the titles' aspect ratio all weird, the upper one partly covering the lower one. All titles and text in the docu come out like this, but the video (and audio) is exported correctly.
Any ideas on how to solve this very annoying problem?
Many thanks!!
Alexander

Hi Studio X,
Thank you for your quick reply.
The producers of the film want to upload this making of-documentary on YouTube. Therefore, I need to give them a high-quality-mov with the least possible Megabites. My film has a 35 minute running time.
So I figured: Let's start with the 'smallest' high-quality FCP-export to begin with (HDV-720p25), and throw that one in Compressor, in order to end up with a 'small' but good looking H.264-MOV for YouTube.
But for some reason, those "HDV-720p25"-exports mess up the titles. And I can't figure out why.
Alexander

Can AE Export a Quicktime Reference?

If so, how? If not, what is the best way to send footage back into Avid Media Composer?

Can AE Export a Quicktime Reference?
No. How should it? Ref movies are just what the name implies - basically playlists inside a MOV container referencing the original OMF/ MXF clips. No program other than Avid's own tools have a way of creating this, because it would require to be able to access the media database.
If not, what is the best way to send footage back into Avid Media Composer?
Set your QT CoDec to the Avid CoDec you are using anyway, then do a fast import. Otehrwise any otehr QT CoDec will do as well.
Mylenium

Changing monitor resolution with proper aspect ratio

My project size is 800x600 and I wanted to provide an option to the user to change their monitor resolution at 800x600 by clicking on button. I have also planned to do it by using buddy api xtra, and already tested it. The problem is, when I am doing this on a PC with panoramic monitor (native resolution 1920x1080), it got stretched. I know it's very natural (as the aspect ratio has changed ) and I can get it in shape by squeeze the width using 'draw.rect'.
I noticed, there are some PCs with advanced display card that don't even get stretched, but shows the 800x600 resolution in proper aspect ratio by keeping the extra space black both sides. And I don't need to write any further codes (squeeze the width using 'draw.rect') to keep it in shape.
The real problem starts here, I can't able to filter the above situations by any logical means. I wanted to write codes only for the PCs that get stretched, but I didn't able to find any support from Director to determine which type of display card has been attached. I need to know whether it will get stretched, or the display card can able to manage the aspect ratio.
Any one have any solution in this matter?
Please don't hesitate to ask if you need any more info.

Hello handler
If you talking about this kind of thing...
https://forums.adobe.com/message/5773207
search for..... _movie.stage.drawRect = _system.deskTopRectList[1] & _movie.stage.rect = _system.deskTopRectList[1]
You don't need an xtra to change the resolutions - but you do have to work a few things - I tend to use flash text because it scales better.
regards
milky

How to obtain proper aspect ratios for sequences in Premiere Pro?

I'm posting it here, because I use AE SDK for the effect.
I've got a RED sequence in Premiere that is 2048x1152. The footage is 2816x2304 anamorphic 2:1. The sequence preview is 1920x1080, like any Premiere preset over HD. I can't seem to get the proper size and aspect ratio to resize the UI controls and position the effect.
Normally I'd use this:
scale_x *= (PF_FpShort) in_data->pixel_aspect_ratio.den / (PF_FpShort) in_data->pixel_aspect_ratio.num;
scale_x *= (PF_FpShort) in_data->downsample_x.num / (PF_FpShort) in_data->downsample_x.den;
scale_y *= (PF_FpShort) in_data->downsample_y.num / (PF_FpShort) in_data->downsample_y.den;
But in this case it doesn't seem to work. Also standard procedures for UI resizing from SDK examples fail.
How can I obtain the proper aspect ratio and sizes?
Thanks in advance.

Premiere Pro is not well designed for this type of collaborative work flow. That's not to say something can't be made to work, just that it may not be as seamless as you'd like.
For starters, there's no way to really 'merge' the changes made by two different people working on the same project, so one of the primary rules you'll have to implement is that only one person at a time can work on any given project, and you'll have to be in constant communication as to who is working on which project, with person A leaving it alone until person B gives the go-ahead. At which point B will have to leave it alone until A gives the go-ahead. If you don't do this, your changes will overwrite each other and you'll get nowhere.
Second thing to be aware of is that clip markers are stored with the media, so while sending only the project file back and forth is fine for most things, it won't work with clip markers. You'll also need to transfer whatever media files have the markers. Given the relatively large size of media compared to project files, it may be best to simply forgo using clip makers.
If the hard drive setup is not identical on both machines, you may have to relink the media with every swap of project files.

How can I export via QuickTime in iMovie '13 (10.0)?

Prior versions of iMovie had an export via QuickTime option, which allowed me to select the file format, encoding settings, etc. After upgrading to the new iMovie, that appears to have gone away. The Share -> File option does not allow me that level of control over the output file. Has that functionality been removed from iMovie?

I'm also having trouble with this. The new version of iMovie lost a lot of its features and is clearly focused toward the social media side of things. After importing using SD cameras that import video in a *square* PiP format, I am finding it impossible to update any of my settings to export the video in any other format that wouldn't cut out the picture. Basically, the only settings I've found in the share option of the iMovie 10.0 cu off the tops and bottoms of all my recording. Previously, I used QuickTime settings to pick what format and quality I wanted to export in. Does anyone have any insight about how to export using, say, a 640 x 480 format or in being able to adjust to any format other than the standard ones giving.
Is there any other video software I can be using to import and export with that gives me more functionality?

Can anyone tell me if Quicktime Pro retains aspect ratio once a video is rotated?

I'm reluctant to purchase Quicktime Pro until I know the answer to this question and Apple Support doesn't seem to have anyway to ask, so I thought I'd try this group.
I took some videos with my iPhone (the long way), and need to be able to rotate them and convert them to avi files. I understand that Quicktime Pro can do the rotation and conversion, but I saw one review that said the aspect ratio is not retained, i.e. the video comes out flattend (wider).
Can anyone tell me if this is still true with QT Pro, or if there are other solutions for resolving this outside of QT Pro?? I have tried a number of other converters, and found one that rotates, but aspect ratio not retained.
Thanks in advance for any help shared!!!

I took some videos with my iPhone (the long way), and need to be able to rotate them and convert them to avi files. I understand that Quicktime Pro can do the rotation and conversion, but I saw one review that said the aspect ratio is not retained, i.e. the video comes out flattend (wider).
This may or may not depend on your specific work flow. Many "settings' saved to the original file by QT 7 Pro are merely "playback instructions" which may or may not play correctly in other media players while these same settings do work properly when saved/converted to a new file container. In addition, not being a Windows user, I don't know if there are are any significant differences between the Mac and Windows versions of QT 7. In any case, I just took a short sample clip, stored it on my hard drive via Aperture 3, opened the file in QT 7 Pro, rotated the clip in QT 7 Pro, and used the "Save As..." command to store the modified file. This modified file now plays correctly in current versions of the QT 7, MPEG Streamclip, and VLC media players. Have uploaded a copy of this file so you can download it, test playback in various players you normally use, and/or test convert it to your specific AVI audio and video compression formats.
SAMPLE ROTATED FILE
Can anyone tell me if this is still true with QT Pro, or if there are other solutions for resolving this outside of QT Pro?? I have tried a number of other converters, and found one that rotates, but aspect ratio not retained.
As indicated above, the file plays correctly for me in various media players and all media "Inspector" windows, including other third party media information utilities, confirm the correct dimensions and aspect ratio as displayed. As to AVI conversion, I test converted the uploaded file to AVI (DivX5/MP3) at original dimensions using VisualHub. (Also tried the VideoMonkey AVI encode but it limited the source 720p file to a 720x480 output and I did not know if you were agreeable to such a restriction.) Suggest you run similar tests with your preferred Windows converters to confirm/refute results on your system.

I can't export to QuickTime, it gives message "Codec not found."

I have long sequence, in which I have some Channel Swap effects. I get an error message saying it can't be rendered for a sequence this long (72 minutes) with my hardware (2009 iMac running OS 10.6.8). When I try to export to QuickTime, it tells me "Codec not found." I'm trying to export to Apple Pro Res HQ. What should I do? I took out the Channel Swap effects and didn't get the message anymore in the sequence, but I'm afraid the codec issue will crop up again, even though I changed it to Apple Pro Res in the Render Options tab under Sequence settings, rather than just "Same as Sequence". Eventually, I will have to export to HQ, and I'm not sure this codec lets me do that. Help!

You don't give any details about your format or sequence settings, so I'll be general here.
Just a couple of observations...
The only time limitation messages I've seen (in the last decade) have been resource-oriented, not NLE constraints so if your system doesn't like a 72-minute sequence I'd be looking at drive space or something like that. Have you tried outputting two 36-minute pieces?
I don't understand your logic in using the sequence codec option (which is limited to two specific formats) to control output of the sequence rather than the output "same as sequence" dropdown) options. Personally, I don't use either, I output the sequence as is and transcode in Compressor.
Simple as it sounds, "Codec not found" generally means exactly that, so I'd be looking at whether the codecs need to be re-installed.
Hope this helps

Can fcp 5.4 use HD 1920 x 1080 footage in its proper aspect ratio?

I just got a Cannon Mark II 5D and am using fcp 5.4 to edit video.
I am not using capture and log... just dragging it in to the project bin. None of my project settings are 1920 x 1080. How do I set my aspect ratio properly?
And... to throw a kink in the mix. I did not realize this right away. I've been editing for a while. But, I'm set at a different aspect ratio. Can I change this midstream?
Thanks for you help.

Try the Final Cut Studio forum.

Can't export to quicktime v10 from FCP 5

I have recently loaded FCP 5 (Not Studio) onto a G5 iMac.
When I try and export to quicktime it only exports the first
18 seconds or so. My FCP 5 worked fine on my iMac G-4 with Quicktime 7.6 but it doesn't export on my G-5 using Quicktime 10.
It will export using quicktime conversion, but then I cannot get my chapter markers.
Any and all help appreciated.
Michael the Hunter

Thanks for the response.
On my G4 I am using 10.04.11 and it works just fine with my FCP 5. The G 5 that I am having trouble with FCP 5 is Snow Leopard. I figured that the Snow Leopard OS was probably the problem along with Quicktime 10. And you have confirmed that.
Looks like I will have to purchase a newer version of FCP for the G 5 and use my FCP 5 on my old G 4. Thank you apple.
Thanks for your input.

Please watch and see if you can tell me how to correct the aspect ratio

http://www.youtube.com/watch?v=shiFprOnbK4
This is an unfinished std. def video hence this issue I ran into which is just a fun video for my youth group kids I teach at my church. I am editing it in final cut pro 7 and if you see at about 35 seconds the aspect ratio changes whatever its doing with the picture there.
I have never ran into this problem before so I don't know if its something I may have selected on the camera accidentally or done wrong in FCP but I shot all the video the same day of course for this event of ours and all the other video is fine an in 16:9 or what was called the "letterbox" option on my Panasonic DVX100B.
Please help me correct it if you know how. Thank you very much in advance.

I can't watch the video as well. Not quite sure what trouble your having
Aspect ratios can be tricky and there are a few spots you can mess them up. First I would check to make sure that your sequence settings are the same aspect ratio as your original footage. I would also make sure your exporting with the correct aspect ratio as well. (If you’re using the quicktime conversion option. Sometimes depending on your settings options like 16:9 are not turned on by default and you need to check them before exporting.)
Also if you can change the aspect ratio in FCP regardless of your sequence's aspect ratio is. Under your distort tab there is a aspect ratio option. +33 will make your footage 4:3 and -33 will make your footage anamorphic. However this will only stretch your footage. This method is only useful for when you can to place 4:3 footage into a 16:9 sequence without it appearing distorted and stretched

Exporting 16:9 and retaining aspect ratio

Hi all.
I have a 16:9 Pal project and want to export it for iPod (I have checked the iPod forum to no avail).
When I export the project the picture is squished and is 4:3. I have tried many things but cannot get the desired result - a wide screen iPod movie with black bars top and bottom. Although I know it can be done because I have downloaded iPod movies that appear to be 16:9.
I will give 10 points to the person who can help me.
Cheers, Steve

Open your exported movie in Quicktime Pro.
Select Window->Show Movie Properties or <command>J.
In the list at top of the Properties window, select the Video Track.
Click the Visual Settings tab.
Uncheck the "Preserve Aspect Ratio" checkbox.
In Scaled size you see the Horizontal x Vertical size in pixels. Multiply the Vertical number by 16 and divide by 9. Enter the result in the Horizontal box and hit return. Example: original scaled size = 720 x 486. New values are 864 x 486 (720 x 16/9 = 864).
You'll immediately see the aspect ratio of the movie change. Save the file.
You're done.

Editing two files together for proper aspect ratio output

hello,
i have 2 files that are 720 x 480 which i'll edit into one project playing together side by side.
this will then show on a projector with a native resolution of 1280x800.
i do not want to crop the sides of two source files by half, but to crop them by a lesser amount to make a wider pairing that will play well with the projector's 16:10 aspect ratio, with no black banding.
to begin my project: 768x480 (same 16:10 ratio as the projector) is not an option to select as a project starting point. 1280x800 is also not an option, and although the crop is actually perfect in a 1280x720 project, i don't want fcpx to do the upscaling, and i believe the 16:9 aspect ratio would lead to black banding top/bottom when shown on the projector.
i'm not sure where to begin, any advice would be appreciated,
thanks.

Unfortunately, FCPX does not offer any 16:10 project settings. The different resolutions offered for HD formats refer to pixel ratio rather than actual dimensions. A project in FCPX is going to be either 4:3 or 16:9. There are a couple of things you can try, but my recommendation would depend on what program will be used to output the movie to the projector (QuickTime?). The 1280x720 dimensions are the standard 720p resolution and is as close as you will get to your desired resolution. If you are worried about the banding that would occur when displaying a 16:9 file on a 16:10 projector, the easiest solution would be to use the media player to stretch the movie to fill the screen. If you have Compressor you could encode your FCPX output to your desired resolution, but you will still be stretching the image. If you want more assistance provide a little more info, are the soure files 4:3 or 16:9 for example, and I may be able to offer more advice if I know a little more.

Exporting current frame with correct aspect ratio

Hi and thanks for viewing my question. I've created a video in Motion 3 using the preset HDV1080i60 which is the preset for the video I'm using in Final Cut. It's a video of images, text elements and a background video that I created from scratch not a video recorded with an hd cam. I export the video and import to Final Cut and everything is great including the correct aspect ratio. When I export current frame from Motion no matter what setting I use it changes the aspect ratio so it isn't in widescreen format anymore. Any suggestions how to export a frame to maintain the widescreen format like it does when I export as a video? Thanks for the help.

Because Motion is exporting with square pixels...
If you have photoshop, you can do the following:
Now make a new image, go to the HDTV 1920x1080 preset, but change the width to 1728 hit OK... Copy and paste your original image from Motion and scale horizontally to fit (helps if snapping is turned on).
+How I arrived to this conclusion...+
I opened the exported still in photoshop, changed the pixel aspect ratio to d1/ntsc widescreen. Made a new image with the HDTV setting, copied and pasted the image into the new ps file, command clicked the layer (which selects the pasted image), went to edit crop. Then I checked the image size and it gave me 1728x1080...

AME Export from HDV source: Pixel aspect ratio squeezed in Queue; ok in direct export.

I have some existing HDV footage that was converted to Cineform codec (CFHD) in an .avi file that I need to export. My target requires Windows media format (.wmv Window Media video 9).
My output settings are the following:
640x480, square pixels, 29.97, lower, VBR, 2 pass unconstrained, 800 kbps.
When I export these files in a sequence directly from Premiere Pro CC (Export button), the pixel aspect ratio looks correct. (It looks ok in Premiere and in the Premiere Export window, too.)
When I export using the Queue button in Premiere to AME CC, the video renders out squeezed, as if the aspect ratio is ignored.
I can also see the squeezed video in the AME preview window when the file is rendering.
This worked OK previously in Premiere 5.5.
Is there a setting that controls this and allows normal rendering from the Queue?
Using the Queue is much preferred to avoid bottlenecks in workflow.
System: Windows 7 enterprise 64 bit, Lenovo W510, Core i7, 16GB ram.
Nvidia Quadro FX 880M
Premiere Pro CC: 7.2.1(4)
Adobe Media Encoder: 7.2.0.43 (64-bit)
Not sure if I am using the Mercury Playback Engine GPU Acceleration.
Thanks.

I'm using CC, updated today. (see system info at top).
I'm starting to wonder if the codec info is not read correctly when using the Queue (Cineform codec). I took your suggestions and created a new sequence with one clip and used the same settings. I opened the export settings window in two separate ways:
Export settings in Premiere (Ctrl M). All is good in the Source tab. PAR is interpreted correctly:
I sent the export to the queue, and from the job in AME clicked the "Custom" link to retrieve the same settings window.
However, the Source video PAR is not interpreted correctly:
This must be related to why the render from the AME queue is not correct.

Can't export to Quicktime in proper aspect ratio.

Similar Messages

Maybe you are looking for