Can't get across bridge

I can't get anything to work beyond getting an instance of
root. This is very frustrating!!! Any help, please???

Hi,
You are getting the javascript error that txtTest is not a
function because the syntax for calling elements of the root movie
has changed. Now you have to do it like this:
var test = root.getTxtTest().getText();
alert(test);
and it will work just OK. To access a component of your flash
movie always prepend get before the actual ID and capitalize the
first letter. Thus, if you have a slider with the id slide1, you
can access it like this:
var mySliderProperty =
FABridge.movie_name.root().getSlide1().getProperty;
Only root can be accessed directly by calling root() on the
flash movie. All other controls must follow this rule.
Hope this helps,
Cristian

Similar Messages

  • I can't get adobe bridge to open on my iMac... CS6 works perfect. Any ideas of what I need to do?

    I can't get adobe bridge to open on my iMac... CS6 works perfect. Any ideas of what I need to do?
    Thanks Judy

    The lack of security updates requires me to update any old OS. Unless you never connect to anything on the Internet with the computer OR you never have anything to protect on your computer running such a computer leaves you open to theft, fraud, etc. The major problem with Mavericks and soon with OS X.X is unfamiliarity. Sure they have features we don’t like. But I bet so did the one you are running, when you upgraded to it.
    Having said that I really got miffed when I was required to update my TV to work with digital signals. I have no trouble telling people to upgrade their computer, but ask me to upgrade my TV those were fighting words.

  • Can't get ethernet bridge to connect to network

    Hi
    I am trying to connect my old iMac G3 (10.2) to my airport express network with an Aeropad Mini (an ethernet bridge powered by USB hub on my mac - made by Macsense).
    The network is seen successfully by an iMac G5, an Intel Macbook and a PC. The connection occasionally works but more often than not it does not see my airport express - instead it connects to a self-assigned IP. Sometimes it connects then drops off halfway through. Other times it just will not connect at all.
    There are no drivers and you set it up via your browser. I can connect to the status and set-up page (192.168.1.50), after entering all the Aeropad info manually, and most times it can see my Airport Express (via the Site Survey on the set-up pages). but sometimes it does not even get that far. I reset the aeropad and restart the mac many times, and sometimes it works but mostly it doesn't.
    I'm using channel 11 and it's WAP-encrypted.
    Things I've tried:
    updating the firmware from the macsense website
    checking it's on client mode
    manually entering the DNS address of my router - 10.0.1.1.
    Trashing the internetconfig preferences from the library
    making sure that ethernet is at the top of my network port configurations
    Plugging it into a powered USB hub
    Trying it on my MacBook (running Leopard).
    Still can't connect - just a self-assigned IP - even on on the new macbook.
    Any help would be appreciated as I really can't get this to work and it's beginning to take over my life!. I thought it was working after I entered the DNS address but it just went down again the next day.
    Thanks.
    Message was edited by: Joanna Leapman

    This is probably repeating the steps which you have taken already, but I thought I'd put them in one place just in case.
    Problem:
    If you're able to see other wireless networks but not your own. (And it works with AppleTV version 1.x)
    It can be any of the following:
    1. No wireless signal/out of range (check your multicast setting and put this as low as possible, check the range with other wireless devices/moving your appletv closer)
    2. The wireless SSID is set to invisible/private (use "Other" on AppleTV and enter the SSID manually.)
    3. The AppleTV doesn't support the channel used. (Tune the wireless to use a lower channel such as those under 10.)
    4. The AppleTV is not supporting the security of your encryption.
    Troubleshooting:
    1. First try setting up a basic wireless network with no security, no frills such as a high multicast rate or high channel number and as a basic wireless b or g network. Position the AppleTV next to the basestation and then attempt to make the appletv connect to it. (Do not use an AdHoc network with your mac, as the AppleTV doesn't see these.) At this stage you're just trying to see if the AppleTV is even able to connect to your hardware. If this doesn't work there is possibly a larger problem at hand.
    2. If this works, then move the devices to their desired locations. (This checks that it's not a range/interference issue.)
    3. If this is still working, then the problem lays in a configuration setting. Firstly enable a security protocol, avoid WEP. Keep adding settings, keeping changes from the default to a minimum.
    If you can't get past step 1, then it could be an issue with your wifi base station. Try getting the AppleTV to connect to a different wireless basestation (perhaps borrow one from a friend or a neighbour's unsecured network.)

  • How can I get Adobe Bridge to show XMP metadata using Adobe Drive 4 CMIS Connector?

    I have successfully connected to an Alfresco Enterprise Edition 4.1.0 repository, using the Adobe Drive 4, created a test folder and uploaded a jpeg file containing XMP metadata into it.
    When I view the image's metadata (using Adobe Bridge), I observe that only part the standard file properties are displayed.
    When I view a local copy of the image using the same, I see all fields of the standard file properties plus available metadata.
    My question: what should I do in Adobe Bridge to be able to see all available XMP metadata?
    Kind Regards and Appreciation
    Don Greenwood
    Pixelboxx GmbH
    Dortmund

    How did you get through to customer service?  They've changed the website and I can't even find phone numbers or a chat button any more.
    Here's my story that I posted on discussion yesterday, but no one has replied:
    I am screaming and pulling my hair out right now!  The last six months with Adobe has been a nightmare.
    Once again I am completely locked out of Creative Cloud and cannot use the apps even though my automatic monthly deduction for payment was just made a couple of days ago.  Creative Cloud continues to reset itself to the trial version which runs out in 30 days and after that I am locked out once again.
    Now it looks like it is harder to access support than before.  Where are chat and the phone numbers now?  This was a nightmare with countless hours spent on chat and the phone over the last six months, and now I don't even know how to access support in order to spend even more time that does not solve the problem.  What am I to do?
    I cannot use the product I have paid for!
    Please help!

  • Can't get adobe bridge output to work on my PC - with Windows 8

    I have a new pc with Windows 8.
    I run Bridge CC 2014 (Creative Cloud version), but I can't install the Output workspace.
    I have tried this help from Adobe
    http://helpx.adobe.com/bridge/kb/install-output-module-bridge-cc.html but I do not have the locations and folders that is mentioned.
    Hope You can help me
    Annelise Bruhn

    <moved from Downloading, Installing, Setting Up to Bridge General Discussion>

  • How can I get Abobe Bridge to Not save as a DW file?

    Everytime I make minor adjustments to a photo in Camara Raw within Adobe Bridge, it saves the edits in a DW (Dreamweaver) file next to that photograph. I have not changed any settings recently and don't know why it would start doing that all of a sudden. When I delete that DW file, all of the edits to that photo disapear and it reverts back to the original. Every time I click on the DW file, it takes me to Dreamweaver and opens a window with a whole bunch of code...
    How can I go back to having everything I do in Camera Raw save to/into the photo itself?

    ACR is Adobe Camera Raw which processes your raw file format.  When you edit in ACR it creates an XML file (of same name) where all the edits are stored.  If you want to delete all edits for the raw file you can delete the XML file.   XML is a hidden file as you do not need to see it.  In Bridge there is a symbol in upper right hand corner of thumbnail that shows raw file is edited.
    Hope this helps.

  • Can not get WET200 Bridge to wireless connect to EA6900 Router

    Hello,
    I have a connectivity problem with my LinkSys WET200 Wireless-G business Ethernet Bridge
    SN: MVP007800846. Any trouble shooting suggestions appreciated.
    My system is Dell Vostro 1500 laptop, with Windows XP SP3
    Basis problem: When I try to connect wireless to my NEW LynkSys EA6900 router; I receive the error “Limited or no connection” from the cable connection icon in the system tray.   I have tried several things ( restart computer, restart WET200) to make a valid connection with no success.
    BACKGROUND and what I have completed:
    I replaced my old LinkSys WRT router with a new LynkSys EA6900 router.  The EA6900 is up and running (after a few set up problems) and able to connect to both PC and MAC laptops and Android and Mac phones plus a couple of wireless printers.
    To set up the WET200, I connected an Ethernet ( ENet) cable from the Wet200 PoE port to a unused port on the EA6900 router. I used my PC desktop Firefox browser to access the WET200 setup screens by entering the WET200 default IP address in the Firefox address bar.  I connected to the WET200, entered the default username and password and could see all the setup screens.
    I selected the WIRELESS, Basic setup, did a sight survey and my EA6900 network name and security setting was present.  I entered the network name in the Basic Wireless setup and changed the WET200 security setting to match the network security setting.
    I removed the ENet cable connecting the WET200 to the EA6900 router. Power recycled the WET200.  I then connected an ENet cable from Port 3 on the WET200 to the Enet cable connector on my PC laptop. 
    I then received the error “Limited or no connection” from the cable connection icon in the system tray.
    Thanks, krazykat1

    Hello krazykat
    Need to ask a few questions, so I understand the network and the area this is in. How far apart are the router and WET? Did this work with your previous router, what kind was it? Normally we (Small Business) can not guarantee compatibly  with non small business equipment.
    I have seen WDS work  between a WET 200 and other WET200's, also with some of the other older Small Business routers, like WRV200, and 210. 
    The main problem is most likely that the EA6900 is too new. I say that because the EA6900 is an AC router, the WET200 only does "G". One of the major components required for WDS to work is that Radio Chipsets match and well as channel, radio signal G to G, G/N to G/N, N to N.
    I am afraid that there is too much age difference between your products.  
    Eric Moyers
    .:|:.:|:. CISCO | Eric Moyers | Cisco Technical Support |
    Wireless and Surveillance Subject Matter Expert
    Please rate helpful Posts and Let others know when your Question has been answered 
    You can click my name beside the picture if you need to email me directly 

  • If i just purchase the photography package can i get adobe bridge instead of LR

    also in need of camera raw. would that be an addition license?

    Cloud Plans https://creative.adobe.com/plans
    -Special Photography Plan includes Photoshop & Lightroom & Bridge & Mobile Lightroom
    -Special Photography Plan includes 2Gig of Cloud storage (not the 20Gig of the full plan)

  • I can't get minibridge or Bridge working on my CS6 photoshop

    I can't get my bridge or mini bridge working in my CS6 photoshop

    if you're away from how do you access data? through your network? check if you turned off your data. Go to SETTINGS>GENERAL>NETWORK
    turn on Cellular Data if it's OFF
    3G should also be ON for faster access.

  • When I move a RAW file from IPhoto to my desktop or Photoshop it changes to a jpeg and reduces in size. How can I get the Raw file across?

    When I move a RAW file from IPhoto on my macbook pro to desktop or Photoshop it changes to a jpeg and reduces in size. How can I get the Raw file to move across?

    I create separate folders based on the year and then the actual date of when I take images. You can make those folders anywhere on any hard drive that is connected to your Mac whether internal or external. I also use the Photoshop Photo Downloader that is included with Photoshop/Bridge and it will create the date folder so all I do is create a Year folder.
    Open Bridge or click on the Bridge icon in PS and in the File menu item in Bridge select "Get photos from Camera". It can be a camera connected to your Mac or a memory card from a camera. A window will open and you then select the camera or memory card. Set the location they will be downloaded to, just the folder and you can Browse to a folder that you created, then in the "Create  Subfolders drop down select what date stamp you want to use or or custom name or not to create subfolders at all.
    I've never cared for iPhoto one bit. I tried it but found it way to restrictive. It likes to have full control over how you interact with your images.

  • I live in an apartment with supplied internet.  I have wireless network with no password.  I have a wall outlet that I can plug into.  When I plug in my TC I get a double NAT error.  I try bridge mode, but I can't get the internet to work.

    Can I get an explanation of what bridge mode is?
    Can I get suggestions on what I should do to use the TC as a wireless device to spread the same wireless device my apartment is broadcasting? 
    Can I get a suggestion on how to use the TC as a different wireless device with it's own password without access to the cable modem.  I only have access to a wall port. 
    I own many apple devices, iMac mid-2011, Macbook Air 2013, 2 ipads, and 2 iphones for the family, and Apple TV. 
    I want all my devices to be on a password related internet but the double nat on my TC makes weird things happen and slow.  I try bridge mode but the internet doesn't work. 
    I hope I have described this situation clearly enough. 
    Thanks

    I want all my devices to be on a password related internet but the double nat on my TC makes weird things happen and slow.  I try bridge mode but the internet doesn't work.
    You building supplied internet is a cheap service that is without proper routable addresses..
    Therefore to use more than one IP you MUST have double NAT.. sorry there is no choice..
    Slow that is because you are sharing internet with every other person in the building.. get your own broadband service.
    Bridge will not work.. it cannot work because the building only has private IP addressing. And they only give you a single address.
    You can put a password on the wireless.. go to the airport utility and put in a password.
    Other than that I don't understand what password you expect.
    Can I get an explanation of what bridge mode is?
    No NAT.. means the TC becomes a dumb Wireless AP and switch.. works fine with a cable modem router.. or any broadband router but useless with your building system.
    Can I get suggestions on what I should do to use the TC as a wireless device to spread the same wireless device my apartment is broadcasting?
    Double NAT, and set your own wireless names. There is no alternative.. sorry.

  • How Can I Get My Ratings and Playlists to Mirror Across Multiple Accounts?

    I'm sharing my music across two accounts on my Mac by placing my iTunes folder in the Shared folder, with an alias to that in each User's Music folder. It works fine, but the User of the other account would like the benefit of all my Playlists, and would especially like to have all My Ratings.
    How can I get My Ratings and Playlists to mirror across multiple accounts? I would've thought simply importing the <iTunes Music Library.xml> file would do it, but since we're both using the same iTunes folder, we must already be using the same XML file, right?

    The answer about where the ratings, etc. are stored is not an easy one, but the best I can figure is that it is a combination of the iTunes Music Library.xml, the iTunes Library file, and the com.apple.iTunes.plist. Apparently, the com.apple.iTunes.plist (in the under User/Library/Preferences) references the other two files. If you close iTunes, take the com.apple.iTunes.plist out of the user's Library/Preferences folder and then reopen iTunes, you will see that all the ratings, play counts, etc. (track information) will have disappeared. If you close iTunes, replace the com.apple.iTunes.plist, then reopen iTunes, the track information will be restored. The playlists, which are not part of the track information, seem to function independently of the com.apple.iTunes.plist, but if you share the whole iTunes folder across accounts, this should include the playlists. When I back up my iTunes library to another folder, I back up a copy of the current com.apple.iTunes.plist from my User/Library/Preference folder. I think that the way this works across multiple accounts is that the com.apple.iTunes.plist reads track information from the other files in the iTunes folder, because if you throw away the com.apple.iTunes.plist from one user account, it affects all the other user accounts sharing the same iTunes folder.

  • I have adobe cs6 and I can't get bridge or mini bridge open. All I get is "waiting for bridge." can anyone help?

    I have adobe cs6 and I can't get bridge or mini bridge open. All I get is "waiting for bridge." can anyone help?

    This tech doc should help. Simply try out each step one at a time until it works.
    Error: Waiting for Bridge | Mini Bridge panel
    Gene

  • Bridge wont recognizw my Nikon d610.  I am running windows 8 and photoshop cs6 with 8.6 camera raw plug in.  How can I get bridge to recognize my camera?  Thanks to anyone who can help!!

    Bridge wont recognizw my Nikon d610.  I am running windows 8 and photoshop cs6 with 8.6 camera raw plug in.  How can I get bridge to recognize my camera?  Thanks!!

    That camera model has been supported since ACR 8.3 and it is most certainly supported by ACR 8.6 and ACR 8.7 (beta).
    Either you have damaged, corrupt image files, or a faulty Photoshop and/or ACR installation.
    If there are no privacy issues, you can post one of your files to the FTP service of your choice (such as Dropbox or yousendit.com), post the link to it, and someone here can take a look at it for you.

  • If I own Adobe Photoshop Elements 12 and have it installed on my computer, how can I get access to Adobe Bridge without a monthly subscription?  Is there a way to use Adobe Photoshop and Bridge without paying a monthly fee?

    If I own Adobe Photoshop Elements 12 and have it installed on my computer, how can I get access to Adobe Bridge without a monthly subscription?  Is there a way to use Adobe Photoshop and Bridge without paying a monthly fee?

    Hi Jaclyn2,
    Please follow the steps mentioned in the kb: http://helpx.adobe.com/creative-suite/kb/error-update-server-repsonding-cs4.html .
    Regards,
    Romit Sinha

Maybe you are looking for

  • How to import multiple eBooks in a zip to iBooks?

    A friend gave me about 500 ebooks to install on my iPad using iBooks. I've downloaded them and opened in both iZip and Zip Browser. I can't figure out how to select multiple files and import them all at once without manually importing each one indivi

  • My Satellite P30 stops untimely

    Hello, I've got a Satellite P30 since 2004 and it is good. But since a few month, when I run a lot of applications simultaneously, or when I run applications that needs a lot of RAM or UC ressources (like games or a or anti-virus in complete analysis

  • IMac as a wireless access point to internet

    Hi anyone knows iMac as a access point to internet to use other gadgets

  • For the Inspection lot status is CRTD instead of REL status

    Dear Experts, Today I have observed strange behavoir of the system. For the Finished material 04 insp type, Every day we used to generate inspection lots automatically with MB31for 101 mov type. generated inspection lot status will be REL bydefault.

  • Spool file with just the data

    Hi, I have a sql query that I'm spooling to a file. I have set echo off, heading off, feedback off, verify off. The spool file is exactly what I want except for the SQL prompt and the actual query. It looks like this: SQL> "select statement;" data da