Can't get multiple tables to align

I've got multiple tables that won't align. When I zoom in on the document the left and right edges of the tables aren't perfectly aligned. It's noticeable when I print the document. It's also noticeable when converting to a PDF and printing. The edges are off by just millimeters. I can email doc if anyone wants to have a look.
Thanks in advance.

Pages > Preferences > Ruler Preferences > Alignment Guides > Turn ON both "Show guides at object center" and "Show guides at object edges"
Select all Tables (Command-Click) Pages > Align Objects > Left
Select individual Table that is out of alignment (now on the right hand side) and drag by selection handle until alignment guides show it is aligned, then release, repeat with additional tables.

Similar Messages

I can't get my table to remain uniform.

I am a novice at creating webpage so please bear with me. I
am trying to put together a Football Schedule page for a football
league's website. I have uploaded the table. (Team_schedule ) to my
mysql database via ms access. Status ... OK.
Then I created the connection in dreamweaver so it would help
me with the php coding . Staus ....Ok it works.
Now I’d like to have the dreamweaver repeat the table
info – Status.....Ok it works.
However , when I put the record set in the table . I
can’t get the table to NOT expand. I need the text t to
remain the size I made it .
Here is a link of how I’d like it to look
[S=http://seminoles.cstv.com/sports/m-footbl/sched/fsu-m-footbl-sched.html[/S]https://
FSU
FOOTBALL WEBSITE[/S]
Also it repeats all the records until it fills up the page.
Can someone please help.

I haven't looked at that URL, but will try to help.
By default, an HTML table cell will expand to show all the
content you put into it, even if you set a specific pixel width. If
you have lots of text in a cell, you can try setting a font and
font size using CSS to control the size of the text.
Also, I'm assuming you are using the Repeat Region Server
behavior. That behavior allows you to specify how many records per
page to show. It sounds like you selected all records, rather than
a specific number. Try updating the behavior to show only a certain
number of records and inserting a Record Navigation Bar to
navaigate through the entire recordset.

Using table comparison can we use multiple tables as source?

Using table comparison can we use multiple tables as source?
Thank you very much for the helpful info.

Table Comparison
1) Input Data coming in
2) Comparison table (table to which the data is compared)
3) Output (input rows with respective opcodes based on the comparison result of input dataset with the comparison table)
If your question is whether table comparison can accept union/join of multiple table sources, you can achieve by using merge/query transforms and then feeding to table comparison. Here, you have to be careful about choosing the primary keys inside table comparison

Can i get multiple records if selection screen is 900 using PROVIDE

Hi All,
Iam using following statement for fetching MULTIPLE records from infotype 0008. In Attributes if i declare LDB as pnp and selection screen as 900, then iam not getting any records.
Instead of th selection screen 900 is empty. then records will getting properly.
How can i get multiple records if selection screen is 900?
PROVIDE * FROM p0008
between pn-begda and pn-endda.

Hi Ranjith
You can use
PYBEGDA and PYENDDA instead of PN-BEGDA AND PN-ENDDA.
Regards
Muneer.VK

Can we get multiple graphs dynamically in oracle apex?

Can we get multiple graphs dynamically in a page in oracle apex?

Vaishalini wrote:
Thank You riedelme and Howard.
Below is the example, I need to dynamically displays graphs with content (somewhat) dynamically selected for client from the select list.
Example :-
Lets say client A contains 5 contracts as A1, A2, A3, A4, A5.
And Client B contains 3 contracts as B1 ,B2, B3.
created a graph for contracts on sum(unique_submissions) and sum(total_submissions).
Requirement is :-
When I select Client A , then the page should show 5 individual graphs based on client A contracts in same page(as client A has 5 contracts).
Similarly when select client B , the same page should show 3 graphs (as client B has 3 contracts).
Please let me know if you understood the example, what I was trying to explain to you (I hope)and let me know if you need further more information.
Thanks.It sounds like you need to use Howard's idea of conditional region display. When you select client A display client A graphs, and when you select client B display those graphs. Read about conditional region display in the documentation and post back here if you have more questions

We are upgrading from 8.3 to 9.2. How can i get the table(record) structure changes between these 2 version

We are upgrading from 8.3 to 9.2. How can i get the table(record) structure changes between these 2 versions. I am not able to find it in Oracle support.

My guess is you want to upgrade HR8.3 to 9.2 - and that is not one jump upgrade. You will need to go HRMS 83 to 90
(PeopleSoft Enterprise HRMS 8.3x to 9.0 Upgrade (Doc ID 747333.1) and then 90 to 92 (PeopleSoft Human Capital Management 9.0 to 9.2 Upgrade Home Page (Doc ID 1536087.1)
Each these MOS pages contains the Demo to Demo Compare Reports that show the data structures changes between the releases.
Hope it helps.

How can I get multiple users to be able to share the music on iTunes? I've tried Home Sharing, but it does not work properly.

How can I get home sharing to work on my mac mini for multiple users? It says it is working, but it never shows up in the left hand column.

Gino Cerullo,
Thanks for your response. I tried all that myself. In fact, last night, it all worked fine on all users. This morning, no Home Sharing would show up. It is really weird because some setting must have changed, but I did not knowingly changed anything, and now all the obvious fixes don't work. In fact, if I turn off Home Sharing and turn it back on, then it comes up only until I hit the "done" button on the set up page and then it goes away from the left hand column again. The ADVANCED drop down tab says it is on, but it is not there.
Thanks anyway.
Edzell

How can we get the table name...

Hi All,
How can we get the actual table name for an argument if its datatype is %ROWTYPE.
For Ex :
function ACCOUNT_UPDATE (account_no number,
person person%rowtype,
amounts dbms_describe.number_table,
trans_date date)
return accounts.balance%type;
In the above function 'ACCOUNT_UPDATE', for argument person the datatype is 'person%rowtype'.
Is there any way to get the name from Data Dictionary tables.
I tried using All_Arguments and DBMS_DESCRIBE, I can able to get all the individual fields of %ROWTYPE by I could not able to know the exact table name thru the DD.
my requirement is dynamically I need to declare a variable for the argument datatype.
Your help is highly appreciated.
Thanks

hi vinay,
this is the easiest way to find the tablename of a particular field.
t.code:XD01.
enter.
select the kunnr field.
press F1.
the top of the screen u will get 'Technical setting icon.
select that one.then u will get tablename,fieldname,parameter id also.
if helps give the rewards.
regards,
akash.k

Can you get multiple phone socket working with BT ...

Hi,
So I recently had a BT engineer visit, he connected the phone line on the main socket then left. A week later they turned my BT infinity on.
It works great but the main socket is in a different room to my office. I have a phone socket in my office right next ot my pc. But when i plug my router into this socket it fails to produce an internet connection.
Is there a way to get multiple phone sockets working? I would like to move my hub so it is in my office but the socket isnt giving off internet.
Any help is much appreciated.
Thanks.

You need to identify the cables connected to the removable faceplate beside the red arrow - these are the extension cables to other sockets in the house.
Connected from here you will get voice only - not data.
If there is more than 1 cable you need to identify the one to your office, remove it and fit the cables to the yellow arrow connections.
You only need to connect the cables connected to 2 & 5 (there may be more connected to the faceplate)
guide on this link although it does not tell you the 2/5 connection order - I don't think polarity matters - but someone with more knowledge can advise.
A potential problem you may have is if there are other extension sockets connected to your office socket you use (and not the faceplate) as these then are not suitable for phone - only data.
With DECT phones and the need for just one basestaion not really a probem nowadays but you need to know where each socket in your house is connected from, and what you want to use it for.
If you have any BB problems, BT will also insits you plug the router/modem back into the master socket for all testing.
EDited to add - a krone insertion tool is best for inserting the cables to the socket and has a nice pick to disconnect also. They are easy to use - search you tube for a video.

Having trouble getting multiple tables to post to the same report

I have a canned report that is being generated from one source and I am trying to add a field from a different SQL source table. The report is being run in STAGES but every time I try to run the report I am getting an error report. There are several group by tables on the report and I think since the the 2 tables are different SQL's it may be a problem with the data linking. i have tried several different joining methods but I still can't get it to post.

I have a canned report that is being generated from one source and I am trying to add a field from a different SQL source table. The report is being run in STAGES but every time I try to run the report I am getting an error report. There are several group by tables on the report and I think since the the 2 tables are different SQL's it may be a problem with the data linking. i have tried several different joining methods but I still can't get it to post.

Can we get Multiple production versions in APO

Hi,
Is there a way to get multiple production versions into APO, as the info record( we are using) is what drive the creation of the PDS in APO from ECC
Is there a way to find out how we can have multiple production versions in APO.
Thanks
Maddy

Maddy,
Standard functionality in APO is to support multiple production versions.
Production Versions are a standard object in ECC. They consist of a combination of a Bill of Materials, a Routing, and a few other bits of data. For a given material/plant combination in ECC, there can be many Production Versions.
Production Version - Repetitive Manufacturing (PP-REM) - SAP Library
These Production Versions are integrated in standard CIF via either Production Process Model or Production Data Structure.
Integration of Production Process Models - Integration of Master Data - SAP Library
Integration of Production Data Structures Generated from R/3 Mas - Integration of Master Data - SAP Library
Best Regards,
DB49

Can't get my table to sort. Please help

Can't seem to get my table to sort. That was a non-issue with the previous version of Numbers but now if I try to sort ascending by totals it just shuffles my numbers with no visible logic. Please help, this is such a simple task, shouldn't be so hard. I tried all suggestions on the forum and nothing works. This is a snapshot of the table:
And this is the result after sorting descending by Totals column:
Any and all help welcome!

Hi Dannie,
Sorting in Numbers 3 follows a different pattern from Numbers 2. Formulas do not automatically adjust.
When Numbers 3 was installled, it was placed in your Applications folder. Numbers 2 was moved to a subfolder called iWork '09 within your applications folder.
With your document open in Numbers 3, File > Export To > Numbers '09. Then use Numbers '09 (Numbers 2) to work on it.
Wayne Contello has written a User Tip for working with the old and new versions of iWork.
https://discussions.apple.com/docs/DOC-6991
The trick is to drag icons for both versions to your Dock. Right click or control click on each and Options > Keep in Dock. That puts you in charge of which version you launch.
Here is a screen shot of both Numbers icons on my Dock.
Numbers 2.3 (Numbers '09) on the left with a three column graph.
Numbers 3.2 on the right with a four column graph.
Both versions will run happily together. Just be sure which version is opening your document.
Instead of double clicking the document, run whichever version of Numbers/Pages/Keynote suits and use File > Open.
Regards,
Ian.

BroadXent DSL Router to older AEBS - can't get multiple connections

Router is "auto detection" half or full bridge mode, direct ethernet cable to older "mushroom" AEBS. For some reason, can only get one wireless connection at a time. Have to shut down connected machine before can get connection to another. Not unusual that I have to cycle power on modem and AEBS to get new connection. This is a recent problem. I had a LinkSys BRFSR81 router (which died today) between the modem and AEBS and had no problem w/multiple wireless machines at the same time. Likewise, tried to temporarily use a Netgear 4 port switch in place of the linksys router, and can only get one hardwired internet connection at a time. (Modem=> LinkSys 8 port, 5 ports ethernet to various macines, one port to AEBS to 4-5 laptops - worked out well, everyone got connectivity) What am I missing? Help please!! - family is all over me about no connectivity!

Mission accomplished.
I used the instructions in the last post of this thread:
http://discussions.apple.com/thread.jspa?messageID=11085975&#11085975
BUT, I set the AEBS to PPPoe rather than DHCP.
Rebooted the Westell, powered up the AEBS...Good to Go!

How can I get the table name of my column?

I'm using the JDK 1.3 trying to get a table name of a column from a result set. Regardless of what driver I'm using (ODBC Bridge/Oracle) I always get a null returned. Does this method work?
If not, if I'm doing an SQL query that uses more than 1 table and each table has a return of the same column name, how do I distinguish which table the column is from. Thanks

You can use ResultSetMetaData interface and method
String getTableName(int column)
This should return you the table name.
To get ResultSetMetaData object, you can use
ResultSetMetaData getMetaData()
method of ResultSet interface.
HTH

How can I get the table control up arrow or down arrow SCROLL OK_CODE?

Dear All,
I want get the table control up or down Scroll OK_CODE (not button, is arrow click), But I debugged have not found when I click the up or down scroll.
Please give me some help.
Thanks

Hi Sun,
PBO..
                           Loop with control T1.
                   module get_Looplines.
                Endloop.
                    Module get_looplines.
                      Looplines = sy-loopc.      "<< by using this you can get the scroll bar...
                    Endmodule.
if you wan the ok_code for scroll bar in table control...
the ok_code is not generated for scroll bar..
but if you do not clear the ok_code in PBO it will carries the ok_code when ever you press scroll bar up and down...same ok_code is repeated..
Regards,
Prabhudas

Can't get multiple tables to align

Similar Messages

Maybe you are looking for