Can't log in to wiki server

Everything was working fine with my wiki web site a couple of days ago. This morning when I tried to log in, I couldn't.
I can get to the main wiki page: https://tewiki.trilleng.com but when I click on "My Pages" or "Wikis" or "Blogs" and try to log in, it just shakes it's little square head "no."
I tried to log in at 02:35:32. Here are some log entries at that time:
tail -f /var/log/apache2/error_log.132390*
[Sat Dec 17 01:42:19 2011] [warn] RSA server certificate CommonName (CN) `trilleng' does NOT match server name!?
[Sat Dec 17 01:42:19 2011] [warn] RSA server certificate CommonName (CN) `trilleng' does NOT match server name!?
[Sat Dec 17 02:27:49 2011] [error] [client 66.249.66.46] File does not exist: /Library/WebServer/Documents/robots.txt
[Sat Dec 17 02:35:32 2011] [error] (61)Connection refused: proxy: HTTP: attempt to connect to 127.0.0.1:8171 (*) failed
tail -f /var/log/system.log
Dec 17 02:32:10 tewiki /System/Library/CoreServices/CCacheServer.app/Contents/MacOS/CCacheServer[7965] : No valid tickets, timing out
Dec 17 02:33:48 tewiki login[8362]: USER_PROCESS: 8362 ttys003
Dec 17 02:37:06 tewiki org.clamav.clamd[58]: SelfCheck: Database status OK.
This isn't much information to go on. Where else can I look to get this sorted?
Thanks!
Luis

Found and fixed the problem.
In the file /Library/Logs/wikid/error.log was this:
exceptions.IOError: [Errno 13] Permission denied: '/Library/Application Support/Apple/WikiServer/entityList.plist'
I checked the WikiServer directory and the files there were owned by user:group root:admin. They're supposed to be owned by _teamsserver:_teamsserver so I did a chown on that whole directory:
sudo chown -R _teamsserver:_teamsserver WikiServer
After that I was able to authenticate with my wiki server.
I wonder if I can give myself 10 points for providing the correct answer. :-)

Similar Messages

Can't log in to Lion Server. Open Directory Log Message says: unable to connect to password server

I am setting up Lion Server. I can't log in to Lion Server from client.
Checking the Open Directory Log: says: "unable to connect to password server" or
"3394.14268, Node: /LDAPv3/127.0.0.1, Module: AppleODClient - unable to read Password Server response - connection to Password Server was closed, socket fd 18 (5205)"
Thanks for help with this.

I never discovered the problem, and instead rebuilt the server from the ground up. I followed instructions at this discussion thread. Very helpful.
How To Install A (Almost) Working Lion Server With Profile Management/SSL/OD/Mail/iCal/Address Book/VNC/Web/etc.
I have had some log-in problems with users. I have found that restarting the server helps. If this doesn't work, I rebuild permissions on the server, followed by opening up Workgroup Manager, go to the user's password, click on options and require that the user change password on the next log-in. For some reason, this will usually fix the problem. I then log in as the user, and "change" the password to the original one. Also note, that if you import a user, the password is not brought in. You must enter it for each user that you imported. Even so, I have often had to resort to the re-set password procedure to enable a log-in.

Exchange 2013 - Admins can only log into one ECP server

Simple run down of my environment:
• Two AD sites (Site1 and Site2)
• One 2008 R2 domain controller at each site (DC1 w/ FSMOs and DC2) running AD forest function level 2008 R2
• One 2012 Std server with Exchange 2012 Std CU3 at each site (EX1 and EX2) – CAS/MBX on both, No DAG
• Half of mailboxes on each server
Using https://webmail.domain.com for all of our internal and external virtual directories. Adding /OWA or /ECP will get you into the respective site from either internal or external.
All Domain Admin/Exchange Admin (Organization Management) do NOT have mailboxes. Those individuals can log into ECP from https://webmail.domain.com/ecp, or FQDN or IP of EX2 only. If John Smith has no mailbox then he must use:
https://webmail.domain.com/ecp
or
https://ex2.domain.com/ecp
or
https://10.16.109.31/ecp
If EX2 goes offline or they use https://ex1.domain.com/ecp or https://10.16.108.31/ecp then none of the admins can login and they get the following:
Use the following link to open this mailbox with the best performance:
https://webmail.domain.com/owa/auth.owa
X-FEServer: EX2
Date: 2/18/2014 10:37:42 PM
s ECP or the https://webamil.domain.com/ecps ECP.
They can access EMS from either server and run Get-ECPVirtualDirectory and it shows what we would expect:
– https://webmail.domain.com/ecp
– https://webmail.domain.com/ecp
Why can an admin with no mailbox only log into the ECP on EX2? What is forcing the login to EX2 only? How can I move that “forced login” to EX1 if we ever get into a situation where EX2 is having problems? What happened in Active Directory or Exchange that
made EX2 the primary login server for ECP and OWA? My FSMOs are located at Site 1…the same location where EX1 is located. The same server that I cannot log into ECP directly.
~Rick

Any admin that is mail enabled can then only log into the server that hosts his mailbox. Admins without mailboxes can only log into EX2. And again, all admins can log into https://webmail.domain.com/ecp unless one of the servers goes offline
and that's when the problems occur. Nothing obvious or unusual regarding mail flow. Done various internal and external tests and have not seen anything obvious or in the logs.
Yesterday's change that MS Support had me do was to delete the ExternalURL for the ECP virtual directories. No difference. So, my latest update from MS Support that requested me to try today's change...
set-owavirtualdirectory “owa (default web site)” -RedirectToOptimalOWAServer $false
After performing an IIS reset and making sure replication had completed there was no difference. So, I am now forced to wait till Monday for MS to respond if the pattern stays at one email per day.
Has anyone with multiple servers at different AD sites been able to log directly into the either server like I'm trying? I get this problem in my labs and I even had MS, while on the phone, remote in to make sure I was setting it up properly.
The guy on the phone never said if their labs do the same thing cause they don't have multiple AD sites in their labs. In my lab if I have two servers at each site then I can log into both servers at the site, but not the other site. It appears it becomes
site dependent then.
MS has taken numerous logs and they are acting like this is the first time they've seen this. Yet I can reproduce it with no problem time after time. I'll create new VMs and start all over from scratch and make this happen every time I create a new AD/Exchange
environment (it does take me a while to build all those VMs from scratch). No fancy GPOs to AD and no radical changes to the Exchange servers. Other than obvious config changes to make sure email can flow internally and externally, this is pretty much out
of the box.
~Rick

Can I log in a windows server 2008 environment with a macbook pro

I have a macbook pro. Can I log into a domain of a win server 2008?
Hans

Generally it is the browser service that populates network neighborhood. This technology is no longer used with newer OS like server 2008, windows 7/8.
Description of the Microsoft Computer Browser Service
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Can't get to log in page, can't log in to Content Server

Hi,
I have installed Content Server on my desktop. I took almost all of the default settings. Saw no errors in log. Both Content Service and Content Admin Service are running correctly. Since 'new' install did not work, I have also tried to 'update' it.
Following instructions exist in install doc. The log in page itself does not come up. What am I missing?
Go to the Content Server homepage (portal page). By default, the address is http://[host_name]/[web_root], for example http://master1/server/.
UCM is installed in C:\Oracle\ucm\server - so what would be it's URL for homepage?
Thanks in advance.
Umesh

Hi
The correct format for accessing the portal page of CS is : http://hostname:port/webrelativeroott/portal.htm
Before this make sure that the configurations are done properly in the webserver if apache is being used , httpd.conf.
Hope this helps
Thanks
Srinath

Can't log out of App Server

Sun Java System Application Server Enterprise Edition 9.1 (build b13)
We have several EARs running against Sun App server and using Container Form based authentication.
In the applications, we have a Logout link. The Logout link triggers an action in the application, and that action invalidates the user session. It then forwards them to our "index.jsp" which is controlled by the servlet security settings.
But the problem is that the user is not "logged out". When they hit the index.jsp, it does not prompt them for a login, not does it prevent them from going anyplace in the application.
Any ideas as to why the container does not log them out? We do have SSO enabled in the app server. Is there a better technique for logging a user out?

I have fixed it...The solution was to reboot the iPhone. Shut it down, turned it back on, and then the problem apps went away. I had to resynch them from iTunes.

Can't log in to portal server 7

i installed sun portal server 7 on a linux machine, at first i was able to login to the portal server and did some cofigs after loggin out i tried to login again i got an authentication failure message what could be the problem?

I never discovered the problem, and instead rebuilt the server from the ground up. I followed instructions at this discussion thread. Very helpful.
How To Install A (Almost) Working Lion Server With Profile Management/SSL/OD/Mail/iCal/Address Book/VNC/Web/etc.
I have had some log-in problems with users. I have found that restarting the server helps. If this doesn't work, I rebuild permissions on the server, followed by opening up Workgroup Manager, go to the user's password, click on options and require that the user change password on the next log-in. For some reason, this will usually fix the problem. I then log in as the user, and "change" the password to the original one. Also note, that if you import a user, the password is not brought in. You must enter it for each user that you imported. Even so, I have often had to resort to the re-set password procedure to enable a log-in.

Mac os x wiki server can't authenticate user password from active directory recently after we upgraded to windows 2008 server.

after upgraded to windows 2008 server, our mac os x wiki server can't authenticate user password anymore. How can I re-bind the wiki server to the AD again? thanks in advance.

Solved it by deleting the user and creating a new one with the same userID.
Maybe it occured because I marked the "user has to change password after first login" box when resetting the password but didn't yet allow him to do so in the webpages menu?!?

Can't log into PowerShell and EAC on Exchange 2013 Server

I'm not sure why but I my Exchange PowerShell can't log into my Exchange server and I can't access the EAC
via localhost or the URL.
I did notice that I enabled HTTP Proxy in IIS and that I used Application Route Requesting with it but I went ahead
and reversed all those changes. I also noticed that the physical path for each sub-site in Default Web Site goes to the HTTP Proxy version of that folder instead of the ClientAccess one. I changed each folder to the clientaccess one but that didn't help. I
did some research on this and I saw that I had to enable the kerbauth in the modules area and I did that to. I restarted IIS and WebRM and that still didn't help.
The Exchange Management Shell error:
New-PSSession : [exchangeserver.domain.net] Connecting to remote server exchangeserver.domain.net failed with the
following
error message : The client cannot connect to the destination specified in the request. Verify that the service
on the
destination is running and is accepting requests. Consult the logs and documentation for the WS-Management service
running on the destination, most commonly IIS or WinRM. If the destination is the WinRM service, run the following
command on the destination to analyze and configure the WinRM service: "winrm quickconfig". For more
information, see
the about_Remote_Troubleshooting Help topic.
At line:1 char:1
+ New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
gTransportException
+ FullyQualifiedErrorId : CannotConnect,PSSessionOpenFailed
On the web when I try to access EAC on our URL and not localhost, I get this error:
400
Bad Request :(
The request sent by your browser was not valid
On localhost, I just get a page cannot be found.

Hello
tip:
Check Get-owavirtualdirectory | fl and Get-ECPVirtualDirectory | fl and make sure that you using “Form based Authentication” and “Basic Authentication”
and check Control Panel\All Control Panel Items\Credential Manager for saved password.
and http://goo.gl/IC5P4S
sorry my english

Wiki Server 2: "Access Forbidden!"

Hi all,
Suddenly today (after a reboot) our wiki pages started responding with the Error 403 "Access Forbidden" page... As seen here: http://www.celadonsound.com/groups
I can't seem to figure out why this has happened. I'm sure I could do with supplying a lot more information but I guess I'm going to need you guys (and gals) to shout at me before I realise what information I should be including...
Up until today the wiki pages performed perfectly now I get that 403 error when trying to access them on the web..
Also my calendars have stopped syncing displaying:
"The server responded with
“HTTP/1.1 500 Internal Server Error”
to operation CalDAVAccountRefreshQueueableOperation."
Both the calendars and wikis worked just fine yesterday and nothing has been changed on the server aside from a reboot because I had to move the unit.
I have tried many things, including ensuring that the Collaborations folder and its contents have the correct _teamsserver r&w permisions. Which they do.
Below is the error log for the wiki server since a couple of service restarts ago:
2011-07-20 18:35:17+0100 [-] Log opened.
2011-07-20 18:35:17+0100 [-] twistd 8.2.0 (/usr/bin/python 2.6.1) starting up.
2011-07-20 18:35:17+0100 [-] reactor class: twisted.internet.selectreactor.SelectReactor.
2011-07-20 18:35:17+0100 [-] Current log level is warn
2011-07-20 18:35:17+0100 [-] twisted.web.server.Site starting on 8086
2011-07-20 18:35:17+0100 [-] twisted.web2.channel.http.HTTPFactory starting on 8087
2011-07-20 18:35:17+0100 [-] Starting
2011-07-20 18:35:18+0100 [-] in migration. repo version is: 23
2011-07-20 18:35:18+0100 [-] Running
2011-07-20 18:49:25+0100 [-] Received SIGTERM, shutting down.
2011-07-20 18:49:25+0100 [-] Stopping
2011-07-20 18:49:25+0100 [-] userPrefsFlushLooper stopped looping, doing final flush
2011-07-20 18:49:25+0100 [-] mailingListFlushLooper stopped looping, doing final flush
2011-07-20 18:49:25+0100 [-] Main loop terminated.
2011-07-20 18:49:25+0100 [-] Server Shut Down.
2011-07-20 18:49:28+0100 [-] Log opened.
2011-07-20 18:49:28+0100 [-] twistd 8.2.0 (/usr/bin/python 2.6.1) starting up.
2011-07-20 18:49:28+0100 [-] reactor class: twisted.internet.selectreactor.SelectReactor.
2011-07-20 18:49:28+0100 [-] Current log level is warn
2011-07-20 18:49:28+0100 [-] twisted.web.server.Site starting on 8086
2011-07-20 18:49:28+0100 [-] twisted.web2.channel.http.HTTPFactory starting on 8087
2011-07-20 18:49:28+0100 [-] Starting
2011-07-20 18:49:28+0100 [-] in migration. repo version is: 23
2011-07-20 18:49:28+0100 [-] Running
Hopefully someone will be able to help as this is terrorizing me at the moment
Many Thanks,
Elliott

We have the same need: Opening a Link in an wiki article in a blank window - how to?

Os x Leopard Machine can't log in

I am having a problem with a few computers, after building 18 mini mac's i am finding some computers can't log in if the server asks them to change their password on log in. If this isn't the case they log in fine.
Could anyone shine some light on this?
Many thanks

That wasn't obvious, and no password works, old or new.
There are many logs with lots of content that I don't understand. Is there any particular log I should examine first?

Can't delete a blog comment from Lion Wiki Server 3

Started the Wiki Server on my Lion Server today and as a test I added a test comment to a blog. After I saved it I wanted to see if I could edit, change the content or just delete the comment outright. The answer to all three is that I can't. I am logged in as the owner the wiki and the administrator for the server. I looked at the documentation and it appears that I should be able to do all three, but no luck. Any help would be apprciated.
M

You'll get a lot more help if you go to the Lion Server forum. The folks here mainly know about the client OS.

Unable to log into wiki - server setup generals

Hallo!
I am new to SL Server problems and would like to know how to set up a wiki server and ical server properly.
Is there a short manual for this? The manuals by apple dont realy tell me anything specific.
For example i cannot log into my wiki with a given account.
And the ical server utility does not find an account or so.. but i can use a calender from a user i created...
Kind regards
Michael

Using OS X 10.6.8 you can update to 10.8 mountain lion, if you meet the hardware requirements.
From there on you can install OS X Server, when you meet het additional requirements.
OS X Server doesn't have a learning curve compared to Snow Leopard server, it costs a fraction

Everytime I try and sign into my iCloud account it tells me I can't log in due to a server error, but there is nothing wrong with my server . It also wont allow me to view any of my Photos or Documents that i have backed up.

Everytime I try and sign into my iCloud account it tells me I can't log in due to a server error, but there is nothing wrong with my server . It also wont allow me to view any of my Photos or Documents that I have backed up. Please help

Hi,
Are you running any Anti-virus software or do you have your firewall turned on? If so, disable them and try again. If that doesn't work, delete the iCloud account and then sign it back on again.
Make sure you are running the most current version of the iCloud Control Panel:
http://support.apple.com/kb/dl1455
Cheers,
GB

Can't Host a Wiki Server's calendar using Server 10.8

I have setup server and attempted to have one of my calendars on iCal sync with the Wiki calendar
I have a user called bernard
I have a calendar in ical called bernardtraining
In the Wiki the user bernard has a calendar but I cant get ical to sync with the Wiki.
In iCal Accounts
I set up an account in ical lets call it server.myserver.private (hiding actual name)
user name = bernard
password is set to user password
Refresh 5 minutes
In Server Settings iCal Accounts
Server address server.myserver.private
server path aut populates to /principals/__uids__/7A7D303D-8265-47D5-BAD1-01E3DDD4CC37/ (maybe this is the problem)
Port = auto
SSL = No (for now)
No delgates
I then went through this process.....
When you set up iCal Server to provide the calendar service for a wiki, Wiki Server provides access to the calendars, so users who do not have wiki privileges do not have calendar service.
Use serveradmin via the Terminal app to change the setting.sudo serveradmin set calendar:Authentication:Wiki:Enabled = "<setting>" The default value for <setting> is “no”.
The other possible value is “yes.”
Command example:
sudo serveradmin set calendar:Authentication:Wiki:Enabled = "yes"
Use serveradmin via the Terminal app to designate the Wiki server.sudo serveradmin set calendar:Authentication:Wiki:Hostname = "<DNSWikiServer>" The default value for <DNSWikiServer> is the Wiki server’s fully qualified domain name.
Command example:
sudo serveradmin set calendar:Authentication:Wiki:Hostname = "wikiweb.example.com"
Use serveradmin via the Terminal app to encrypt the connection.sudo serveradmin set set calendar:Authentication:Wiki:UseSSL = "(yes|no)" The default value is “no”.
Command example:
sudo serveradmin set set calendar:Authentication:Wiki:UseSSL = "yes"
Still no success.
Can anyone help?

I did, and had it working last night. It won't now, though.
I don't understand port triggering, and when I attempted to look up the help files on the linksys site, they told me to register first - then they wouldn't let me fill in the email address section of the registration, so..
I don't use a firewall, and this computer I'm trying to host the server on is directly connected to the router. The wireless connection is with a laptop upstairs. I just checked, and my IP changed, but fixing that in Port Forwarding still does nothing. I can host the server... It just doesn't show up on gamespy.
Just about everywhere I read up on this, it mentions having to have a static IP address. I went through the guides that tell how to go about getting one set up, but still doesn't work. I don't have anything even remotely mentioning linksys in Network Connections though - that's on the laptop. Could this be the problem?
Another problem I ran into when setting up the router, was I'd get an error unpacking languages, or something. Got it every time, but it let me move on after closing the error so didn't think much of it.

Can't log in to wiki server

Similar Messages

Maybe you are looking for