Can't start samba (complaining about how I'm using the 'samba' binary)
I'm unable to start samba:
➜ ~ sudo systemctl start samba.service
➜ ~ sudo systemctl status samba.service
samba.service - Samba AD Daemon
Loaded: loaded (/usr/lib/systemd/system/samba.service; enabled)
Active: failed (Result: exit-code) since Tue 2013-07-16 13:44:46 PDT; 2s ago
Process: 22130 ExecStart=/usr/bin/samba $SAMBAOPTIONS (code=exited, status=0/SUCCESS)
Main PID: 22131 (code=exited, status=1/FAILURE)
CGroup: name=systemd:/system/samba.service
Jul 16 13:44:46 mitchelh-linux systemd[1]: Starting Samba AD Daemon...
Jul 16 13:44:46 mitchelh-linux systemd[1]: Started Samba AD Daemon.
Jul 16 13:44:46 mitchelh-linux systemd[1]: samba.service: main process exited, code=exited, status=1/FAILURE
Jul 16 13:44:46 mitchelh-linux systemd[1]: Unit samba.service entered failed state.
Here is the error message I'm getting in the samba log (which is actually named `/var/log/samba/%m.log', which is quite fishy):
[2013/07/16 13:44:46, 0] ../source4/smbd/server.c:369(binary_smbd_main)
samba version 4.0.7 started.
Copyright Andrew Tridgell and the Samba Team 1992-2012
[2013/07/16 13:44:46, 0] ../source4/smbd/server.c:461(binary_smbd_main)
At this time the 'samba' binary should only be used for either:
'server role = active directory domain controller' or to access the ntvfs file server with 'server services = +smb' or the rpc proxy with 'dcerpc endpoint servers = remote'
You should start smbd/nmbd/winbindd instead for domain member and standalone file server tasks
I'm using the default configuration, i simply cp'd smb.conf.default to smb.conf. Prior to attempting to start samba I have already started nmbd, smbd, and winbindd for good measure:
➜ ~ sudo systemctl status nmbd.service
nmbd.service - Samba NetBIOS name server
Loaded: loaded (/usr/lib/systemd/system/nmbd.service; enabled)
Active: active (running) since Tue 2013-07-16 13:33:35 PDT; 15min ago
Main PID: 21856 (nmbd)
CGroup: name=systemd:/system/nmbd.service
└─21856 /usr/bin/nmbd -D
Jul 16 13:33:35 mitchelh-linux systemd[1]: Started Samba NetBIOS name server.
➜ ~ sudo systemctl status smbd.service
smbd.service - Samba SMB/CIFS server
Loaded: loaded (/usr/lib/systemd/system/smbd.service; enabled)
Active: active (running) since Tue 2013-07-16 13:33:38 PDT; 15min ago
Main PID: 21864 (smbd)
CGroup: name=systemd:/system/smbd.service
├─21864 /usr/bin/smbd -D
└─21868 /usr/bin/smbd -D
Jul 16 13:33:38 mitchelh-linux systemd[1]: Started Samba SMB/CIFS server.
➜ ~ sudo systemctl status winbindd.service
winbindd.service - Samba Winbind daemon
Loaded: loaded (/usr/lib/systemd/system/winbindd.service; enabled)
Active: active (running) since Tue 2013-07-16 13:36:23 PDT; 12min ago
Main PID: 21990 (winbindd)
CGroup: name=systemd:/system/winbindd.service
├─21990 /usr/bin/winbindd -D
└─21993 /usr/bin/winbindd -D
Jul 16 13:36:23 mitchelh-linux winbindd[21990]: [2013/07/16 13:36:23.484545, 0] ../source3/winbindd/winbindd_cache.c:3179(initialize_winbindd_cache)
Jul 16 13:36:23 mitchelh-linux winbindd[21990]: initialize_winbindd_cache: clearing cache and re-creating with version number 2
Jul 16 13:36:23 mitchelh-linux systemd[1]: Started Samba Winbind daemon.
and testparm seems to check out:
➜ ~ testparm
Load smb config files from /etc/samba/smb.conf
rlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384)
Processing section "[homes]"
Processing section "[printers]"
Loaded services file OK.
Server role: ROLE_STANDALONE
Press enter to see a dump of your service definitions
[global]
workgroup = MYGROUP
server string = Samba Server
log file = /var/log/samba/%m.log
max log size = 50
printcap name = /etc/printcap
dns proxy = No
idmap config * : backend = tdb
[homes]
comment = Home Directories
read only = No
browseable = No
[printers]
comment = All Printers
path = /var/spool/samba
printable = Yes
print ok = Yes
browseable = No
Any ideas as to what's going on? The only references to that error message that I could find on the Internet were instances of mismatched samba/config versions. Is the smb.conf that ships with samba really broken??
I've also tried commenting out the `homes' and `printers' shares.
Did you ever get any further on this? I am hitting a wall here as well. My digging shows that samba 4 dropped security = share mode and I get they are snapping into the Microsoft Domain model for permissions/security. I am able to start nmbd and winbindd (systemctl status shows them both active) but samba always complains with:
[root@localhost ~]# systemctl status samba
samba.service - Samba AD Daemon
Loaded: loaded (/usr/lib/systemd/system/samba.service; enabled)
Active: failed (Result: exit-code) since Thu 2013-10-10 10:45:35 JST; 2min 36s ago
Process: 2482 ExecStart=/usr/bin/samba $SAMBAOPTIONS (code=exited, status=0/SUCCESS)
Main PID: 2483 (code=exited, status=1/FAILURE)
Oct 10 10:45:35 localhost samba[2482]: samba version 4.0.10 started.
Oct 10 10:45:35 localhost samba[2482]: Copyright Andrew Tridgell and the Samba Team 1992-2012
Oct 10 10:45:35 localhost systemd[1]: PID file /var/run/samba.pid not readable (yet?) after start.
Oct 10 10:45:35 localhost systemd[1]: Started Samba AD Daemon.
Oct 10 10:45:35 localhost samba[2483]: [2013/10/10 10:45:35.509158, 0] ../source4/smbd/server.c:475(binary_smbd_main)
Oct 10 10:45:35 localhost samba[2483]: At this time the 'samba' binary should only be used for either:
Oct 10 10:45:35 localhost samba[2483]: 'server role = active directory domain controller' or to access the ntvfs file server with 'server services = +smb' or the rpc proxy with 'dce...ers = remote'
Oct 10 10:45:35 localhost samba[2483]: You should start smbd/nmbd/winbindd instead for domain member and standalone file server tasks
Oct 10 10:45:35 localhost systemd[1]: samba.service: main process exited, code=exited, status=1/FAILURE
Oct 10 10:45:35 localhost systemd[1]: Unit samba.service entered failed state.
Hint: Some lines were ellipsized, use -l to show in full.
[root@localhost ~]#
My smb.conf is pretty basic and I am following this reference: http://obihoernchen.net/wordpress/877/s … rch-linux/
SMB.CONF:
[root@localhost ~]# cat /etc/samba/smb.conf
[global]
workgroup = WORKGROUP
server string = TEST
netbios name = TEST
# hosts allow = 192.168.1.
printcap name = /dev/null
load printers = no
disable spoolss = yes
printing = bsd
log file = /var/log/samba/log.%m
max log size = 50
security = user
dns proxy = no
# For public share without login
map to guest = Bad User
# Android bugix for reading files (samba4 bug see: https://bugzilla.samba.org/show_bug.cgi?id=9706)
unix extensions = false
# Fix for file batch copy issues (see: http://archlinuxarm.org/forum/viewtopic … 18&t=4864)
oplocks = no
level2 oplocks = no
# Some Tuning (See Optimize Performance)
socket options = TCP_NODELAY IPTOS_LOWDELAY SO_RCVBUF=65536 SO_SNDBUF=65536
write cache size = 2097152
getwd cache = yes
min receivefile size = 16384
# Global security
public = yes
#============================ Share Definitions ==============================
# Public, read only
#[Videos]
# comment = Videos for all
# read only = yes
# # use this only for read only shares!
# fake oplocks = yes
# path = /media/zincobi/Videos
# Public, writeable
#[Abrechnungen]
# comment = Abrechnungen
# read only = no
# writeable = yes
# path = /media/zincobi/Abrechnungen
# whole HDD, only for fabian
#[zincobi]
# comment = Fabians share
# public = no
# valid users = fabian
# read only = no
# writeable = yes
# path = /media/zincobi
[Stuff]
comment = test stuff
read only = no
writeable = yes
path = /home/test
[root@localhost ~]#
testparm results:
[root@localhost ~]# testparm /etc/samba/smb.conf
Load smb config files from /etc/samba/smb.conf
rlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384)
Processing section "[Website]"
Loaded services file OK.
Server role: ROLE_STANDALONE
Press enter to see a dump of your service definitions
[global]
netbios name = TEST
server string = TEST
map to guest = Bad User
log file = /var/log/samba/log.%m
max log size = 50
min receivefile size = 16384
unix extensions = No
socket options = TCP_NODELAY IPTOS_LOWDELAY SO_RCVBUF=65536 SO_SNDBUF=65536
load printers = No
printcap name = /dev/null
disable spoolss = Yes
dns proxy = No
idmap config * : backend = tdb
guest ok = Yes
write cache size = 2097152
printing = bsd
print command = lpr -r -P'%p' %s
lpq command = lpq -P'%p'
lprm command = lprm -P'%p' %j
oplocks = No
level2 oplocks = No
[Stuff]
comment = test stuff
path = /home/test
read only = No
Similar Messages
-
can't start up my ipod 5thG and stay remining the logo of apple for too long don't know how to do????
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I can't find anything about how to properly manage the tablet's layout in horizontal or in vertical position.
If I consult my website in vertical position, it's ok but, If I turn my tablet, all the hyperlinks and all general visualization are wrong.
How I can properly handle both views?
PS: I'm sorry for my bad englishCould you share the site URL so we may check at our end? Also could you share some screenshots explaining the 'wrong hyperlinks and visualization'.
Thanks,
Vikas -
How would I go about adding multiple rectangles using the same lines of code?
How would I go about adding multiple rectangles using the same lines of code? I would prefer to just run through a set of code every time I need a polygon. If I just have to create multiple polygon adding statements that's fine but I'd prefer just 1.
>>How would I go about adding multiple rectangles using the same lines of code?
You could create a method that creates and returns x number of Rectangle elements:
public IEnumerable<Rectangle> CreateRectangles(int numberOfRectsToCreate)
for (int i = 0; i < numberOfRectsToCreate; ++i)
Rectangle rect = new Rectangle();
rect.Fill = Brushes.Blue;
rect.Width = 100;
rect.Height = 100;
yield return rect;
..and then call this method from anywhere in your code:
IEnumerable<Rectangle> rects = CreateRectangles(5);
foreach (Rectangle rect in rects)
//add to StackPanel or do whatever with the Rectangle elements:
yourStackPanel.Children.Add(rect);
>>If I just have to create multiple polygon adding statements that's fine but I'd prefer just 1.
When adding Point objects to a Polygon you can only add one per call to the Add method but you could call the Add method inside a loop, e.g:
for(int i = 0; i < 10; ++i)
//add to StackPanel or do whatever with the Rectangle elements:
Polygon p = new Polygon();
p.Points.Add(new Point());
Please remember to close your threads by marking helpful posts as answer and then start a new thread if you have a new question. Please don't post several questions in the same thread. -
How do I use the commands to start and restart the jmqbroker normally?
How do I use the commands to start and restart the jmqbroker normally?
Because I have tried to use "jmqcmd shutdown bkr" and then tried to type
"jmqbroker" to start up. My screen hangs up and seems that the process
hangs up. The message is
[28/Jun/2002:18:29:07 GMT+08:00] [B1060]: Loading persistent data...
[28/Jun/2002:18:29:08 GMT+08:00] [B1039]: Broker "jmqbroker" ready.
The prompt is hanged until I press CTRL-C.
Then I got the following message:
[28/Jun/2002:18:32:07 GMT+08:00] [B1047]: Shutting down broker...
[28/Jun/2002:18:32:07 GMT+08:00] [B1077]: Broadcast good-bye to all
connections ....
[28/Jun/2002:18:32:07 GMT+08:00] [B1078] Flushing good-bye messages
[28/Jun/2002:18:32:07 GMT+08:00] [B1056] Cleaning up persistent
store...
[28/Jun/2002:18:32:07 GMT+08:00] proceessing 0 messages and cleaning
up 0 files...
[28/Jun/2002:18:32:07 GMT+08:00] [B1063] Done
[28/Jun/2002:18:32:07 GMT+08:00] [B1048]: Shutdown of broker complete.
Then, I use jmqadmin to invoke the console, I can start the broker
again, it gives me
Error encountered while connecting to the broker: "MyBroker":
Broker Host: 'localhost'
Primary Port: '7676'
[C4003]: Error occurred on connection creation, - caught
javax.jms.JMSException
Please verify that there is a broker running on the specified host and
port.
I used ps -def | grep jmq there is no process anymore.
Is it a bug? Would somebody have any idea on what went wrong?'jmqbroker' is the command to start a broker.
When you type 'jmqbroker' in a command window,
unless you put it in the background, the shell
prompt won't return until the broker is shutdown.
So when you see 'Broker "jmqbroker" ready.', it tells
you that the broker is running and is ready.
When you CTRL-C the process, it has the same effect
as using jmqcmd to shutdown the broker. And so after that,
there's no jmq processes running since you have just
shutdown the broker.
Remember that the jmqcmd/jmqadmin 'restart' command is to
restart an already running broker. jmcmd/jmqadmin does
not support starting a new broker instance.
If you are using csh, end the jmqcmd command with an ampersand ("&")
to have the broker running in the background. An alternative is to
stop the process with Ctrl-Z then input the command "bg" to have that
process resumed in the background.
The problem with not being able to start a broker using the
administration console is a documented limitation of the product that
Yvonne also mentioned. Check the Administrator's Guide for that. -
I can disable one of my MacBook's two processors using the CPUPalette application. How can I do it under control of a script?
I want to do this because the MacBook is overheating. I will soon get it repaired, but in the meantime, disabling CPU 2 is effective at preventing overheating. Sadly CPUPalette is not scriptable, and it won't remember its setting after the computer is restarted.
Would it be worth learning about the relevant Darwin API (supposing there is one) and writing a small command-line program for the job? I am an experienced developer of software using Standard C.
Comments appreciated.
Davei wonder if there is a key that is stuck cause whenever i try to turn it on again after the 60 minute lockout, it says that the password was incorrect and i am locked out for another 60 minutes
-
About how many years would the integrated macbook pro w/retina batteries last before they required replacement service?
It is entirely dependent upon how the batteries are used ( with a little bit of luck). There is no specific time period that any one can provide.
Here you will find some detailed information on Apple batteries and their care:
http://www.apple.com/support/macbookpro/batteries_power/
Ciao. -
My phone will not turn on, therefore I have received a replacement phone but am wanting to reset my old device. It is not locating it because it says it is offline however I cannot turn it on at all. Can I start with my new device and not reset the old? Any help would be greatly appreciated. It's been a week without a phone
That does happen. It depends on how hard the server is being hit, as well as the connection speed of your system. If you are on a windows system, you will want to disable any antivirus or firewall software during the download.
-
I rented a movie a few hours ago and never finished it. I can't view it on my Apple TV nor on my Computer. When I go to rent it again it says you have already rented this movie, but I can't find it anywhere. How do I watch the remainder of the rental?
I had the same issue with my apple tv 3rd generation. I rented Sinister and selected the "rent and watch now" option. Half way through the movie I accidentally pressed the menu button. When I looked for the rented movie on my apple tv I could not find it. Not even above the movie pannel where "purchased" and "top movies" comes up on the main menu. the apple tv suggests to go to settings>downloads but I don't have that option. I did go to settings> itunes store> check rentals but that didnt work either. It took too long to even check. Thank you because this SOLUTION worked great.
SOLUTION: How to reset apple tv 3 3rd generation to view rented movies:on the apple tv remote: press and hold "menu" to go to the main menu. Select SETTINGS> GENERAL >RESET >RESET ALL SETTINGS. After the apple tv resets, input all your information again and your rented movies should be visible when you cruise above the "movies" section. THANK YOU!!
Apple needs to solve this issue because honestly it took me 3 hours and a half to watch a movie that only lasted 2 BECAUSE I wast trying to solve the issue, reseting and all. blahh. -
how can i print out a full sheet of labels using the same contact info numerous times, mailing labels
Are you using DesignPro from Avery? You should.
It gives you the option to print individual labels or all the same: -
This is probably a dumb question, but I can't find an answer. How do I make the text on my calendar larger so I can actually read it when I print it out? I am using a MacBook.
Press "Command P" and when the Print dialogue box comes up, towards the bottom there is an option allowing you to choose the text size, i.e: small, med, large.
Hope this helps,
NEIL -
How can you sync ipad 2 photos to pc not using the cable or icloud sync?
How can you sync ipad 2 photos to pc not using the cable or icloud sync? Is there a way to do this via wi-fi network, How can you sync ipad 2 photos to pc not using the cable or icloud sync? Is there a way to do this via wi-fi network
Thanks for that, that was my first suggestion but he wants to not email either. His problem is he used his old nokia to do it and it was fine, now anything other than that he thinks is too much hassle.
-
How can I resize an image without losing resolution or using the crop tool? I am using Photoshop Elements 13 on a PC.
Hi Peru Bob,
I've tried two images, the results were:
Image 1
Jpg, original file size 923KB, dimensions 848px x 279px.
After resizing to 848px x 180px with 72dpi, the file size decreased to 164KB.
Image 2
Jpg, original file size 809KB, dimensions 1200px x 1800px.
After resizing to 668px x 722px with 72dpi, the file size decreased to 307KB.
So, there seems to be a fair file size loss - is this to be expected? -
How can i download photoshop elements and premiere elements 10 using the serial number not the cd?
I tried downloading the trial elements 11 and entering the serial number but it wouldn't work, i cannot find a trial for elements 10.
Thankshttp://prodesigntools.com/photoshop-elements-10-direct-download-links-pse-premiere-pre.htm l
Follow the instructions on that page carefully before you click the download link. -
I have a new name and I can not verify my account. How do I validate the user name?
I have a new name and I can not verify my account.
How do I validate the user name?Hello lirom12,
Check out the article below to get your Apple ID verified so you can use it. You would need to send an email to get it verified.
If you didn't receive your Apple ID verification or reset email
http://support.apple.com/kb/TS5404
Regards,
-Norm G.
Maybe you are looking for
-
How to set a page template for news detailed view?
Is there a way to set a page template for the detailed view of the news module? I have a page template setup and added the {module_announcement,,,,,} to the page. When the news item is clicked it always opens the default template - is this how it is
-
Hi everyone. I have a simple VBScript sample that kills a process by name. It works fine on every OS, X86 and 64 bits : ---------------------------kill process sample---------------------------------------- Set wsh = CreateObject("Wscript.Shell") wsh
-
I have lost all my movies, t.v.shows and music, how do I get them back
My computer shot down a couple of times, so I went to have it repaired. The technician needed to reboot the whole system so he save my movies, t.v. shows, apps, music and all on another harddrive. While he was at it I requested to have him installed
-
2LIS_02_ITM delta missing after good receipts
Hi everybody: We are using 2LIS_02_ITM for extracting purchase order, in some cases, delta changes are not uploading to BW, it seems, when good receipt is posted. We have found the note Note 485650 - BW: Missing entries in delta queue after goods rec
-
Mail crashing after last update...
Started with (shift) key down, no luck. Went online to my .Mac account and Exchange account and checked for spam that may cause crash. Nothing there anywhere. I use this day in & out, never any issues until I accepted the updates yesterday. Here's th