Can the Charge with a case fit in the Samsung media dock? or do I have to take the case off?

can the Charge with a case fit in the Samsung media dock? or do I have to take the case off?
thanks!

Dear SandraW,
Of course, there are may cases out there for the Charge but I would have to say generally, no. I have the desk dock and it looks like the Charge fits very snugly into the dock, and that the seat molded into the dock for the phone is an exact match for the side profile of the Charge.
I have the shell/holster case for the Charge that is standard VZW accessory, and having the Charge in the shell portion of the case would prevent it from docking.
I do have a Skin-It skin on the back of the phone, and this does NOT prevent docking.

Similar Messages

  • Can an iphone with a case fit in the michael kors wallet clutch?

    can an iphone with a case fit in the michael kors wallet clutch? I was thinking of getting it but I do not want to take my pittsburgh penguins case off just so it can fit inside of it.

    Yes I saw that article from before. The problem I am having is one that is unique to the PowerMac G5 and does not effect the Mac Pro. The problem I am having is that the PowerMac G5 uses a plastic shield that won't close when you install an Accelero. In order to get this card to work some people have even cut a hole into the shield as you can see with the first picture from this article:
    http://www.xlr8yourmac.com/Graphics/AcceleroS1R2on_ATIX800.html
    Needless to say I feel very uncomfortable doing this. This is why when I came across an article that showed people bending their Acceleros it gave me hope that I could install one with out having to damage my computer and risk having air flow problems. That is why I am wanting to know if bending the Accelero would work like in this forum:
    http://www.silentpcreview.com/forums/viewtopic.php?t=46721

  • Only ipod mini can be charged with supplied usb cable? ..Really?

    I just read in fine print in an obscure part of support site that only the ipod mini can be charged with the "supplied" cable? Is this true? No, come on really? But, I...I,I,I just paid 500 clams for the top of the line shiznit and it doesn't come with any kind of charger? Is apple gonna send me back to the store? No way,I thought apple was down for the little guy...I gotta go buy an A/C charger? 30 more duckets?

    welcome to the forums!
    your ipod doesnt need a power ac cable. Every time you connect ur ipod to your pc, it should start charging the batterie auto matically. Just leave your pc on all night long with the ipod connected, and in the morning your good to go!

  • Charging with silicone case?

    Is it really a problem if charging the ipod mini in the silicone case? There's a slot for it at the bottom to plug in the cord, but looking at the ipod site, it says not to charge when it is in a cover or case. It is just a hassle to take off the silicone case, so whats wrong with charging with the case?

    sometimes the iPod can heat up while charging and leaving it in a case increases the risk of higher internal temperatures...just a precaution.
    -Tom

  • I can't sync with FireWire port and I can't charge with USB port!!

    Hi. I've a old model of iPod (M9244Y). After the last update, my iPod does sync with the FireWire port.
    I tried with another PCs and Mac but it does work. Finaly I buyed an USB cable and this one syncs but not charge.
    I've restored to early versions of iPod Updaters but it does not work again. Can I do somethig to fix it?
    Why I can't sync with the FireWire port?
    Please help me, I can't live without iPod, I can't live without music!!!

    Do you have other Firewire devices? Do they work? Could be the FW ports are not working right.
    First thing to do is reset the FW chip set on the mother board. Unfortunately, when you power down the computer there is always a bit of power still applied to the motherboard to keep things alive and this usually includes the ports to do stuff like detect when a device wants to wake up the computer. The downside of this is when a bus/port chipset goes into a weird state, power cycling the computer won't work.
    So first thing to try is resetting the chipset and to do this you have to power down the computer and completely unplug the computer from the wall power (unplug the power cord to your Mac). Also unplug everything from the Mac's ports (USB, FW, Ethernet, etc.) to make sure no parasitic power is still there to keep the chip alive. Now let it sit for ten minutes (give those big power caps in there time to discharge). Now plug it back in, start up the Mac and see if your FW ports and the drive work any better.
    Patrick

  • I need an extender for my iphone5 so that when I charge my phone on my home, i won't have to take my cover off

    I recently bought a cover for my new iphone5.  If I want to charge it or listen to music, I must take the cover off and it weakens the expensive cover every time.  when I owned my iphon4s, I was able to purchase an extender and never had to take the cover off.  Now I need the same sort of thing.  I was able to find an adapter that sits on an iphone4 doc that has its other end compatible with an iphone5, but it won't play my music, it only chargers.  Help  kim h

    Connect the iPhone to the computer via USB and select it in iTunes.  Go to the Photos tab, set it to not copy photos to the phone, then Apply or Sync.

  • I can't charge with my cable since I downloaded IOS7.

    I'm an iphone5 user since Dec.24th 2012 from Globe plan. i recently updated my phone into ios7. My charger at first is perfectly fine. Thenafter 4 days after my upgrade my charger won't work properly! (Mind you, i take care of my gadget so delicately) My cable charger came fromthe box of my iphone 5 never been replaced. i'm the only one using it.
    So I immediately went to globe business center and checked my unit and the cable. it turned out that my cable is not compatible to any ios7phone. But it is perfectly okay with ios6 iphone. How's that?! They say, ios7 can now detect lower class of cables/charger. How come it willturn out to be lower class of cable when it's just came from the box of an authentic iphone5?! Does apple providing globe a lowered classof units or accessories? Does globe knows about this?! Does globe conduct screening of all phones that are coming under their name?They should atleast checked it before handling it out in the market; and to think the brand "apple" is an established name already. Theyshould provide the best quality of their products. To think that it is not just an ordinary phone. It is a very expensive phone!
    I inquired it to power mac over the phone and they said that I should address my concern at GLOBE since I got my iphone from Globe. Andthey made me sure that is still under my warranty and they should replace it. Then I called globe for the first time re my concern, she said itis still covered under my warranty. Just bring 2 valid IDs, she said. But then, I have this habit of calling not twice but more to confirm my info(bcoz I can't just trust a globe agent right away, bcoz some of them are not credible. I'm sorry) So I called once again. For the second time,she said, my cable is not covered of my warranty!!! OMG! That made me burst out! I haven't received any GOOD news from globe!!!Seriously!! It is always delayed, so slow service in business centers, very complicated terms and conditions, slow internet, very hard toplease. I cannot tolerate this one. 
    Any same experience re my problem in my cable? troubleshoot? Or advice that you can give me. Thank you and have a nice day!

    If you still have problem, contact iTune Support
    https://ssl.apple.com/emea/support/itunes/contact.html

  • Can I charge with USB adapter before use?

    Just got an iPod nano! Woop woop! Question is...before I even think about turning it on or plugging it into my computer, is it OK to charge it with the iPod USB Power Adapter before connecting it to a computer for the first time? Or should I charge it on the computer? What do you recommend?

    No problem at all to charge nano before connecting it up to a computer.
    Enjoy!
    *nathan

  • HT201210 Ipod told me to connect to itunes because it was disabled. Now it's telling me to put in the passcode before I can use it with iTunes. I just want to restore my ipod. I have also tried recovery mode.

    I forgot my password to my ipod touch and locked it out. It told me to connect to iTunes and I did. I put it in recoery mode and started the 5 hour download of the restoring process. I tried it many times it always ends up stopping and an error occurs. Now iTunes is telling me I have to put in my password for my ipod before iTunes can use it and recognize it. But my ipod is still telling me to connect it to iTunes and I just want to restore my ipod.

    Try Recovery Mode a few more times.
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: Data will be lost. You may have to repeat the above many times.

  • Links set in XHTML Transitional with target="_blank" are not opening in a new window. I have allowed popups and turned off ad blocker, but the links still open in the same window.

    This is on a Wordpress install. Is there a Firefox setting I'm missing? Otherwise, I shall have to install a javascript plugin to do this, which seems overkill for what used to be common code.

    I don't know how to delete my question, anyway I'm not having this problem anymore. In our organisation the IT department deploy Firefox updates with certain settings and limitations, in the tap-options the checkbox for opening new windows in new tabs where checked but disabled. They made some changes to make this checkbox enabled and now it works as expected if it's check new windows open i new tabs and if it's not in new windows. They never opens in the same tab as they did before.

  • My web page at 100% is too big for my screen, at 75% it's kinda hard to read. Can I get it to like 85% and keep it there permatly. Now I have to take time to change it on every page! Thanks.

    Every time I cahnge web pages I have to stop and resize to 75%, ehich is a little small. But 100% won't all fit my screen. Can I get to like 80 or 85% and keep it like that so I don't have to resize every page? Thanks.

    Which add-on did you install that shows you the percentage for page zoom?
    The Firefox Page Zoom feature does a domain by domain level of saving the users preferred zoom level settings, there is no default Page Zoom level setting in Firefox and there's no display of zoom %.
    Default FullZoom Level extension: <br />
    https://addons.mozilla.org/en-US/firefox/addon/6965
    NoSquint extension: <br />
    https://addons.mozilla.org/en-US/firefox/addon/2592/

  • Can not charge by using the cord with the different side

    Since i upgrade my iPhone 5 to iOS7
    it can  not charge with the original cable
    you could charge only with one side
    i have try the different cable
    and it's the same problem
    There are  many friend of mine  facing the same problem 
    So i am pretty sure that's not the iPhone 5 's problem , it's about the software

    This is the first post that I've seen on these forums about a cable working only  one way.
    Check the connector carefully for dirt.
    Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

  • Can't charge Nano - is the firmware an issue?

    I was trying to revert back to the original firmware after running into the bug introduced in the iPod Updater released in January, in which the stars/ratings screen won't go away.
    So, I uninstalled the updater and installed the updater from the CD. Unforunately, I picked the wrong CD. I used the CD that came with my old 3rd generation iPod, not the one that came with the Nano.
    So, I dropped the 3G firmware onto the Nano, and naturally, it didn't work. I saw the old warning graphics, and then it died, because I think it can't charge with the old firmware.
    Any ideas on how I can get it charged so it'll start, and I can load the proper firmware? I'm thinking of digging out my old fireware cable and seeing if it can charge through that.

    I was trying to revert back to the original firmware after running into the bug introduced in the iPod Updater released in January, in which the stars/ratings screen won't go away.
    So, I uninstalled the updater and installed the updater from the CD. Unforunately, I picked the wrong CD. I used the CD that came with my old 3rd generation iPod, not the one that came with the Nano.
    So, I dropped the 3G firmware onto the Nano, and naturally, it didn't work. I saw the old warning graphics, and then it died, because I think it can't charge with the old firmware.
    Any ideas on how I can get it charged so it'll start, and I can load the proper firmware? I'm thinking of digging out my old fireware cable and seeing if it can charge through that.

  • Is there a way that I can control iTunes with the iPhone without any internet connections?

    First let me say that I am ready to throw this POS in the lake.  Is there a way that I can control iTunes with my iPhone without any internet connections?  On my houseboat I have a wifi router and want to connect my phone to my computer to control my music which plays from my computer through my stereo.  I can easily do it with my laptop without having to jump through any internet APPLE BS , but I dont want to have my laptop out on the deck. I just want to use the phone as a remote control.
    Remote wont do it because it keeps saying Im not connected to the internet, even though is is connected to my computer.  Same problem with JumiAmp.

    It should have an option to manage iTunes library without network connection, like Bluetooth or connect directly to the computer without a router or wi-fi, i live outsite of the city and i dont have the ability to control my iTunes librry from the iphone

  • HT1212 I got the message copied below in iTunes but I still need to keep my pics and videos. "iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."

    I got the message copied below in iTunes but I still need to keep my pics and videos. Passcode has been wrongly entered 100 times by my little chiled. Is it possible to still keep the data?
    "iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."

    PHONE LOCKED
    If your phone is locked because you have incorrectly entered the unlock passcode too many times then follow the steps in this article http://support.apple.com/kb/ht1212

Maybe you are looking for

  • I downloaded the upgrade Forefox 4.0 Beta & onto Windows and kept crashing. This is the crash report:AdapterDeviceID: 01d1

    Immediately crashes upon opening: AdapterDeviceID: 01d1 AdapterVendorID: 10de Add-ons: [email protected]:4.0.3,[email protected]:2.1,[email protected]:1.2,{563e4790-7e70-11da-a72b-0800200c9a66}:0.9f,{635abd67-4fe9-1b23-4f01-e679fa7484c1}:2.4.2.201110

  • NIC not failing Over in Cluster

    Hi there...I have configured 2 Node cluster with SoFS role...for VM Cluster and HA using Windows Server 2012 Data Center. Current set up is Host Server has 3 NICS (2 with Default Gateway setup (192.x.x.x), 3 NIC is for heartbeat 10.X.X.X). Configured

  • Uploading from Bridge CS4 to smugmug

    Recently upgraded from CS3 to CS4 and cannont locate the option to upload from Bridge directly to my smugmug site as I could in CS3. What am I missing.

  • IFolder 3.7 Now Not Working

    OES2 SP2 and ifolder 3.7. After the upgrade of OES2 SP1 to SP2, ifolder no longer allows login. Ifolder runs on a webserver and uses a different server for edir. This use to work. No user logins and admin can not login. Just get the username/password

  • Reconstruct -m showing corrupt mailboxes, Version not recognized

    Hi, Using Sun Messaging server version: Sun Java(tm) System Messaging Server 6.2-4.03 (built Sep 22 2005) libimta.so 6.2-4.03 (built 04:37:42, Sep 22 2005) SunOS mailstore-7 5.10 Generic_137137-09 sun4u sparc SUNW,Netra-240 As a normal monthly mainte