Can we add new field to existing Sales Analysis by Item report?

I would like to add sum total weight of all the items sold so far to the above system report?
How could i do that please?
Thanks.

You need to have your own report. This system report is hard coded. You do not have option to add fields there.
Thanks,
Gordon

Similar Messages

  • Can we add new field to inventory Warehouse Report

    I have to add new field name "Desc in Frgn from Item master data" to   inventory Warehouse Report
    How can I do that

    Hello,
    IN print out (PLD) yes, in SAP b1 form not possible.
    Regards
    János

  • Can we add new field in standard idoc segment ?

    HI all,
    My requirement is to add new field in segment named E1EDL44  (Idoc named - DELVRY03).
    Please guide me how to proceed.
    thanks
    manish

    Hi Manish,
    You cann't add any new fields into any of the standard segments like E1EDL44 segment.
    Inorder to achieve this you need to do the following:-
    Create a new segment and with the new fields and this new segment should be added as a child segment to the E1EDL44 segment.  You need to write a piece of code to populate that new segment in the userexit.  You should create a extension for your basic type DELVRY03.  This way you can achieve this scenario.
    Thanks,
    Mahesh.

  • Can we add new fields to the seeded AdvanceTable

    Hi,
    I wanted to add new fields like LOV's to the seeded Advance Table AccountsDistsAdv Table in the page CheckoutDistdPG. This table is associated to the View Instance PoReqDistributionsVO. I am planning to add 6 LOVs to this table. How can I take the view attributes if I add these fields to the seeded Advance Table as I can be able to take from PoReqDistributionsVO only which are not available in this case.
    Can you please let me how can I do this.
    Thanks,
    HC

    Hi
    See data is coming from LOV VO that is fine. But as you want to save this data as well while navigating from this page to other and back to this page. In that case There must be a
    VO based on which all columns of the advance table be based on. So you have to attach your fields with that VO then you should be able to navigate as well.
    More precisely i will say that for LOV field there will be two VO one that will populate the data of LOV and second that will save the value that has been picked from the LOV.
    Hope i make it clear!!!
    Thanks
    AJ

  • How add new field in layout in RDF using XML report definition

    Hi, ALL
    Do you know how add new field in layout of existing report in RDF using XML report definition. If I try change anything in RDF layout, layout which defined in XML override report layout.

    hello,
    in reports 6i we have this limitation, that you can not add a field to a report unless you re-default the whole report, as we do not support positioning-information in the customization file.
    regards,
    the oracle reports team

  • REG: How to add new fields to existing Infospoke

    Hi All,
    We have an existing Infospoke, It has ODS as a Source and some fields are being pulled.
    But here is the scenario....
    I need some extra fields that are available in other ODS. How to add that fields ?
    By some research came to know that.. I need to lookup on the ODS and populate into existing Infospoke.How to add these fields to InfoSpoke using BAdi implementaion.
    Note: already BAdi is active in the infospoke.
    Please help me in this regard

    Hi Chase,
    As you mentioned that BADI is already implemented then I guess you should be able to extend the existing BADI itself.
    For doing lookup first you should know the key fields of source DSO then by using the existing field of Infospoke you will have to read data from DSO.
    DATA: it_data type standard table of 'DSO Name'.
    select Key1 key2 etc...
              Field1 Field2 Field3 Field4
              from DSO
              into table it_data
              for all entries of infospoke
             where key1 = infospoke1-key1
                         key2 = infospoke2-key2.
    This will give you all the required records from source DSO into internal table it_data. Now you using this table you can populate the original table of Infospoke.
    Regards,
    Durgesh.

  • How can I add table fields with existing structure ?

    I like to add PSTLZ field to stucture KOMGG.Is it possible to add table field with the existind structure.If yes how can I do this?kindly help me on this.

    hi
    go to se11
    in change mode select the button append
    create new append which starts from Zpstlz in this komgg structure and add data element and domain to this field and activate with request number
    then in field catalogue this field should be visible ,here ends your append
    now it is ready to use in condition tables.
    reward if helps !!!!!

  • Can not add new VMS into existing clustered server pool

    For some reason, we reinstall VMM (3.1.1-416) with existing UUID and rediscover all VMSs. The process went smooth and the whole system looks clean without dead objects any more. The guest VMs are all working fine. However, the new added VMS in unassigned servers are not displayed in the "Available Servers" when we want to add into existing clustered server pool, but it is shown when we add into unclustered server pool. Anyone has clue or possible way to debug what's wrong.
    Thanks,
    Shun-Jee Liu

    The issue is resolved. The access group in shared iSCSI is not properly configured.

  • How can we add new fields in item customer detail B tab in VA01/VA02/VA03?

    Hi all,
    Anyone can suggest me, how we can add fields in item detail B tab of VA01/VA02/VA03 transaction.
    1) How we can find the screen no and how we can add fileds in it
    2) where we have to write the logic for these fields ( I mean in which include)
    3) Is there any user exit or BADI for this
    4) what is the procedure to do this enhancement .
    5) How we can enhance menu bar
    i am using ECC 6.0 version.
    Please guide me in this .
    Thanks in advance.

    Hi,
      You do not have to do extra coding for this. Just append the extra fields in the table VBAP and include these in the screen 8459 (Additional data A) or 8460 (Additional data B) of program SAPMV45A.
    https://forums.sdn.sap.com/click.jspa?searchID=12244867&messageID=1939475
    Regards
    Kiran Sure

  • IDOC - add new field in in existing segment definition

    Hi,
    For segement type say Z1MARA1 if we need to add a new field in segement definition say Z2MARA1 SAP is not allowing to add new field if we tried to cancelled the realsed 30E it not allowing since the SAP realease which we are working is 640 so only we can create new segement defination with version Z2MARA1001 with new field added but issues is that the partner Profile for outbound parameters the Segment release in IDOc Type is 31I so if we change this segment release in IDOC type to new version ie., 640 then it will pick all the new segement associated with it due to which the the format in which we pass the segements to third party will change so is there any way to use the existing segment definition which is release 30E & add addition field to it. Only one way I found is that when i try to cancel the released message is trigger so in the debug if I make it success it allows to add new field in existing segment definition but which is wrong way of doing is there any way we can used same segment definition & add new field without adding new version & new released.
    Thanks in advance.
    Rajeev

    Varma,
    I know that we can add new segement with new version my question is existing segement definition can we add a new filed because in partner profile we specified release 31i so even we create new segement type then version will be 640 so it will not pick the latest version.
    Thanks
    Rajeev

  • Report RCATS_DISPLAY_ACTIVITIES to add new fields

    Hi  SAP Gurus ,
    I have a req to add new fields from a table ZCS_ENGINE to the report RCATS_DISPLAY_ACTIVITIES . 
    I copied the program and create a Z report ZRCATS_DISPLAY_ACTIVITIES , but i am facing difficulties to add new fields
    to the fieldcatalog.
    Can u please tell the procedure to add fields into the layout and show the output ..
    Advance Thanks,
    Thanks,
    AMS
    Moderator message: too vague, please describe problems in all technical detail when posting again, what is "difficulties", is it classical, ALV, class based ALV, what have you tried so far, please search for available information on fieldcatalog and layouts before asking.
    Edited by: Thomas Zloch on Oct 19, 2010 3:28 PM

    hi,
    as per your requirement (3 fields you mentioned )not inthe standard .you have to contact technical team for new report or enhance ment.
    regards
    muthuramand

  • Add new field in OAF Page.

    I want to personalize a OAF page. My question is, Can i add new field in OAF page linked with database field and some calculations.
    I am trying to add new field in Termination page of Self service HR which will show the hiredate of employee and number of year served.

    Hi,
    As already specified by Kali..
    Step 1 - Create a new Field of type MessageStyledText using Personalization Link.
    Step 2 - Set the corresponding VO Attribute, which will fetch Hire Date.
    Step 3 - Extend the CO and calculate the Served Year, using Java Code.
    Step 4- Set the same value over the bean manually.
    Regards,
    Gyan

  • Master Data Services - Can not add new User and MDS can not Identify LOCAL Users

    Team,
    We are using  SQL Server 2008 R2 and system working since long and suddenly we observed mentioned two issues. The server MyServer is already restarted but did not help.  The MDS installed and configured on SAME Machine (MyServer).
      I  have two issues here.
    1. MDM website can not Identify the local Users (MyServer\MyUser).
    The User created on local Machine (MyServer\MyUser). I logged into MDM website using Admin login and click on User and Permission. Then I click on add and Text box appears to type UserName. Here I type "MyServer\MyUser" (MyServer\MyUser is already
    exists and working since long). Then click checkName; I received a message "No exact Match was found for MyServer\MyUser". Where as User from OTHER domain identified in MDM but could not identify ONLY the local users like "MyServer\MyUser".
    2. Can not add new user in Existing working MDM.
    I created windows user on machine (MyServer\MyUser1) and add it in UserGroup having an access to MDM. and then I tried to login to MDM using newly created user (MyServer\MyUser1) ; I see error Access Is Denied. The Permission assigned to UserGroup (not
    to individual user). The new User (MyUser1) should automatically get added in MDM once logged in. This is working for existing users in UserGroup; BUT NOT ONLY for new user (MyUser1).

    Now I Solved this problem in my case.
    I just grant again all permissions according http://msdn.microsoft.com/en-us/library/ff486994.aspx. Now all work fine.
    Hope, it will help 

  • Add new fields using BADI DNO_EVENT_SAVE in Solution Manager

    Hi,
    I would like to add new fields using BADI DNO_EVENT_SAVE. How can I add new fields? Thanks.

    Hi,
    This is the blog which explains how to add custom fields for CRM_DNO_MONITOR.
    /people/bruyneel.guillaume/blog/2008/06/13/service-desk-implementation-guide-part-ii
    Instead of looking or changing the BAdI, you can copy the program of CRM_DNO_MONITOR and modify it.
    Please check this thread:
    Reg : CRM_DNO_MONITOR
    Regards,
    Sanjai

  • Add new field (Check number) in Txn FBL1N

    Hi SAP,
    Is there any way or configuration i need to do so that i can add new field (Check number) in vendor line item (Txn FBL1N)?
    Here the details of the field (Check number):
    Field name: CHECT
    Table name: PAYR
    Program name: SAPMFCHK
    Appreciate your help. I will give points who help me solve this problem.
    TQ
    Regards,
    Nazrul

    Hi,
    For that you Go through this below method.
    I tested this senario it is working properly.
    Go T.code  O7E4
    IMG > Financial A/cing > Accounts Receivable and Accounts Payable > Vendor Accounts > Line Items > Display Line Items > Define Line item without ALV>Choose Selection Fields
    Account type  K
    Insert Field Name whichever you want
    Save
    Next Go to the FBL1N.
    Select change layout button and select check number from
    Save the layout
    That is enough For that
    If Have any doubt regarding this feel free to ask
    May be this information is useful to you
    Regards
    Surya

Maybe you are looking for