Can we assign the two infoobject to a single datasource
Hi Friends,
I have requirement where I have to assign two info objects to a single datasource. Please let me know if there is any procedure for this.
Regards
sAN
Create Two transformation (don't use infosource unless you are using read master data thing in the rule)
Now one transformation will load to infoobject 1
and second will load to infoobject 2.
scenario
DS-+INFOPACKAGE>->transformatino1 + DTP1>IOBJ1
DSINFOPACKAGE>>trasnformation2DTP2-->IOBJ2.
If you are using read master data then you will have data flow like this.
DSINFOPACKAGE>->transformation 1Infosource-->transformation1"+DTP-2->Infoobject 1.
DS-INFOPACKAGE-->->transformation 2 >Infosource>transformation 2"DTP2-->infoobject 2.
Else a very silly suggestion create a DSO with these two..IOBJ.:-) and load from DS.
Regards,
Rakesh
Similar Messages
-
How to assign the two values for constant (same key)
How to assign the two values for constant (same key)
CONSTANTS: c_pstkey TYPE bschl VALUE '09',
c_splgl TYPE umskz VALUE 'I',
c_buzei TYPE buzei VALUE '001'.
using BSCH1 again i have two asign vaue
can you just let me know
Edited by: sravya_se38 on Nov 23, 2010 12:14 AMYou can create a structure for that constant .
You can define in this way
CONSTANTS : BEGIN OF c_pstkey,
01 TYPE bschl VALUE '01',
02 TYPE bschl VALUE '02',
END OF c_pstkey.
and can access using...
c_pstkey-01, c_pstkey-02 ........ -
Somehow I have two apple accounts. Can I merge the two?
I am not sure why but I have two apple accounts with two different email addresses. This is causing problems with iMessages not syncing over my devices because the different email addresses cause messages to be sent to different devices so I miss messages. Can I merge the two apple accounts, if so. How?
Please see item no. 5 of this article:
http://support.apple.com/kb/HE37
I have multiple Apple IDs. Is there a way for me to merge them into a single Apple ID?
Apple IDs cannot be merged. You should use your preferred Apple ID from now on, but you can still access your purchased items such as music, movies, or software using your other Apple IDs. -
Why is my daughter receiving my text messages on her itouch when I send them from my iphone? We are both on icloud so how can I separate the two? Do I need another icould or apple account??
It's happening because you are using the same Apple ID for iMessage. You don't need to do anything with your iCloud account to fix this. You should create a separate Apple ID for her device to use with iMessage and FaceTime. (You can continue to share the same ID for purchasing from the iTunes and App stores if you wish; it doesn't need to be the same as the ID you use for other services.) Once you've done this, on her device go to Settings>Messages>Send & Receive, tap the ID, sign out, then sign back in with the new ID. Do the same thing in Settings>FaceTime.
Another caution is that if you share and iCloud account with her, any data you both sync with the account such as contacts, will be merged and the merged data will appear on both devices. If you don't want to end up with each other's contacts, calendars, etc. on your devices, you should have separate iCloud accounts to. If you want to make this change, go to Settings>iCloud on her device and tap Delete Account. (This only deletes the account from the device, not from iCloud.) When prompted about what to do with the iCloud data be sure to choose Keep On My iPod. Then set up a new iCloud account with her new ID, turn on iCloud data syncing again, and when prompted choose Merge. -
How can I extract the two channels from a stereo track?
Hi,
I am writing a class that is able to draw an audio signal. It seems to be working well but I have a question. If I load a mono audio file I am able to draw it on a graph by using the byte[] array and everything is ok until now. That's the code:
void Draw(byte[] x)
Graphics g=getGraphics();
Graphics2D g2=(Graphics2D)g;
g2.setRenderingHint(RenderingHints.KEY_ANTIALIASING, RenderingHints.VALUE_ANTIALIAS_ON);
for(int i=0; i<x.length-6; i++)
g2.draw(new Line2D.Float(((i*(getWidth()-6))/x.length)+5, (getHeight()/2)- ((x*(getWidth()-6))/x.length), (((i+1)*(getWidth()-6))/x.length)+5, (getHeight()/2)- ((x[i+1]*(getWidth()-6))/x.length)));
The results is correct only if I have a mono track. Obviously when I get a stereo track the array becomes very large so here the question. How can I extract the two audio channels from a stereo track?
Thanks in advance.
Maurizio Di VittoA mono audio stream is stored [sample, sample, sample, sample], so just a list of samples in an array.
A stereo sample is interleaved in the same manner, so you get [left-sample, right-sample, left-sample, right-sample]
So every nth sample is the 1st channel, every nth+1 is the 2nd channel... -
After upgrading to Windows, in my Outlook 2007 Contacts I now have "Contacts in iCloud" plus "Contacts from iCloud". How can I merge the two to avoid duplication.
Hi Ingo 2711,
Thank you for your suggestion. I backup on itunes. I went to itunes, deleted syncing my contacts, then re-synced them. But the Facetime capability option continues to be there on most (not all, for some curious reason) of my contacts. I am not sure I posed my question correctly. I want to be able to FT with my family, so don't want to delete the FT capability totally from my iphone and ipad. But I don't want all these other iphone calls from various contacts to ring on my ipad as FT calls. I want a way to select with whom I have FT capabilities. Any further suggestions? Thanks much, trekpal -
How do I transfer contacts from an Android to an iphone 6? I have backed up everything to Verizon Cloud but I can't get the two phones to pair up?
The problem is non compatible devices. You could go to a Verizon corporate store and they could try to transfer them, however many customers stated this has resulted in loss of contacts. They don't guarantee a transfer.
http://www.macworld.co.uk/how-to/iphone/transfer-contacts-music-photos-apps-from-android-iphone-3459466/
Move content from your Android phone to iPhone - Apple Support
Verizon's cloud is rated at the bottom.
Good Luck -
When our iPad is in use on the internet, my iMac internet connection goes off. I can't get the two devices to work at the same time with the AirPort Express. Is there a setting somewhere I may have missed?
When two or more devices conflict it typically means that the DHCP service is either misconfigured or is not running at all. DHCP provides IP addresses to local network clients.
Is your AirPort Express base station the only router in your current network configuration? That is, is it connected directly to an Internet modem and not to another router upstream of it? -
Can't find the standard infoobject/infocube in BW system
I have studied BI for only 2 months. When I try to extract data from R/3 system, I find that I can't find the standard Infoobject/infocube such as 0plant, 0purchaseorganize both in RSA5 and RSA6. Our basis team advice me to install a patch for my SAP gui. So could anybody tell me which patch should I install
Best regards
Edited by: Yang12 on Sep 16, 2009 4:04 PMHi expert,
I also has met this kind of issue , i can't found out infoobject( 0CO_AREA,0BUS_AREA,0RESP_PERS...) in BW(ECC6),
And i have perform the steps base on your instruction,but still can't found 0PLANT(i have not install datasource),
Please help me;
By the way,
Do we need install datasource at frist,then go to RSA1-> click on BI Contenct button on left -> click ........
If yes,how does i know which datasource need be install;
for installing 0PLANT - go to RSA1-> click on BI Contenct button on left -> click on object types -> Expand infoobject -> click on select objecst and clifk on find and type 0PLANT and click on transfer selections
Edited by: 350761380 on Sep 16, 2009 4:50 PM -
[b]can we open the two folder at a same time?[/b]
Hello,
I am confused for move the message from one folder to another .
Is it required to open the both folder (source and destination folder ) for move the message from one folder to another.
can i open the two folder at a same time?
please tell me.Yes.
-
Can we assign the same profit center to diff costcenter master data
hi all
can we assign the same profit center to diff costcenter master data
what are the impacts in control parameters for actual and plan dat a
Thanks
MvNrHello,
There is no need that you should have the profit center and cost center one to one relation.
You can assign number of profit centers to a cost center. Meaning that the same profit center can be used in different cost center master data. Whenever, you make posting to cost center, the same will be flown to profit center.
For example when you post actual line items, it will update GLPCA and GLPCT in profit center accounting.
Regards,
Ravi -
Can i judge the two runtime instance are the same handle?
can I judge the two instance is the same handle, just like in C++ to get their address by "&" for compare?
if yes, how?
thanks in advance
FrederickInteger a = new Integer(7);
Integer b = new Integer(7);
boolean sameValue = (a.equals(b)); // true
boolean sameInstance = (a == b); // falseJust in case jsalonen's answer was a bit terse. -
I am trying to airprint from an iPad , but get, " no AirPrint printers found" , how can I connect the two devices?(I have followed all the usual network steps!
Make sure you have a AirPrint enabled printer.
http://support.apple.com/kb/ht4356 -
Can I assign the switch on the side of my ipad to turn on and off wifi?
Can I assign the switch on the side of my Ipad to turn on and off wifi?
No. The only choices are audio mute or orientation lock.
-
I accidentally bought two subscriptions to convert PDFs to word. Can you combine the two subscriptions?
Contact Adobe Customer Care via http://helpx.adobe.com/contact.html?product=export-pdf
Maybe you are looking for
-
It just started not working this week. I am unable to click-and drag anything in my document with the Move Tool. I have noticed that I can click-and-drag objects if I switch to the Free Transform Tool. Ok work around for now but I want to fix the iss
-
IPhone 4S not seen by Win 7 PC
HI we have an iPhone 4s and we are trying to move the pictures to our PC running Win 7. All of our other iPod and IPod Touch devices come up fine and are seen by the PC as a portable device and also appear in iTunes. The iPhone 4S does not, it will c
-
Table of contents - self listing
Hello, I've already found a solution on this forum for my question but I'm hoping an expert can explain to my why something doesn't work as I expect it. Problem: When you make a table of contents (ToC), the entry for the ToC....page # doesn't appear
-
Environment variable setting not working
Hi Frank, Iam reposting this requst to forms forum because i did~t get any response from report forum.Please help me frank. Iam facing a problem related to reports10g ids. database is 9i My basic requirement is ,i want to show a report out put in a B
-
Change screen resolution on netbook
I've just installed arch linux with xfce. When I try to change the resolution, the only options are 800*600 and 640*480. It also does not recognize my external monitor. How can I fix this? Thanks