Can we assign the same profit center to diff costcenter master data

hi all
can we assign the same profit center to diff costcenter master data 
what are the impacts in control parameters  for actual and plan  dat a
Thanks
MvNr

Hello,
There is no need that you should have the profit center and cost center one to one relation.
You can assign number of profit centers to a cost center. Meaning that the same profit center can be used in different cost center master data. Whenever, you make posting to cost center, the same will be flown to profit center.
For example when you post actual line items, it will update GLPCA and GLPCT in profit center accounting.
Regards,
Ravi

Similar Messages

  • Small Differences posted to the same profit center

    Hello dear all,
    My problem is following:
    User post a document via MIRO.
    This document generated an accounting entries. All line are posted with profit center 1000 except one line was posted with profit center 2000.
    This is because the MM small differences (customizing in automatic psoting in FBKP) are customized to be posted to the account 658000.
    In OKB9, the account 658000 is linked to the cost center C0ZZ001 and the cost center COZZ001 is linked to the profit center 2000 in his master record and it's not possible to remove/change it since there transactions already posted in FI.
    That's why the system post automatically the differences with profit center 2000.
    User don't accept this and i don't have idea how to resolve this issue, since small differences should be posted always to the same G/L account.
    My question is: Is there a possibility to let system take always the profit center of the invoice for all lines ?
    Thank you in advance

    Hello Tarek
    Option 1
    When posting the original transaction you can replace the profit center 2000 with Profit center 1000 by over writing.
    Option 2
    You can repost the small difference amounts from Profit center 2000 to 1000 using transaction 9KE0.
    Option 3
    You can reallocate the 2000 small difference amounts to relevant profit center 1000 using distribution cycle. Transaction:4KE5
    Thanks
    Prasad

  • How can I use the same Game Center name on my iPad and my iPhone?

    Is there any way to use the same Game Center name on two devices?

    If you signed into Game Center in Settings > Game Center on both devices with the same Apple ID, you should have the same name in both centers.

  • Switching from Named Pipes to Tcp/Ip sockets : can I use the same DB or will I loose my data?

    Hi,
    we use MDT 2013 in conjunction with a local SQL Express 2012 database. I configured MDT to use Named Pipes but I want to switch to TCP/IP sockets. Is it possible to change that Network Library for an existing database? Am I going to loose the contents of
    the existing db? Thanks for your insights.
    Paul

    Just did a testrun with a test deployment share. Made a db with Named Pipes, filled in some values. Created a new db and I was able to choose between some existing databases. I chose the test db and yes all the values are in it.
    Next I tried it with my main db and indeed nothing is lost. Pfjew.
    Paul

  • Entries hitting only to the dummy profit center

    Hi All,
    While doing the PCA configuration I have created the 3 profit centers & 1 dummy profit center and the same is assigned in controlling area settings also but the problem is while posting the entries in any one of these 3 profit centers by default system is picking dummy profit center ABCD by giving  message "Profit center was set to ABCD" which is a dummy profit center.
    I have assigned the related profit center in cost center master data also.
    Looking for the solution.
    Thanks in advance.

    Hi Ravi,
    Thanks for your reply.
    In 3KEH,I have assigned the account from 1000000 to 2500200 with default profit center Hyderabad but by default the entries are hitting to dummy profit center ABCD.
    In OKB9, i have assigned Gl 4200030 which is a revenue gl in co code and account assignment detail 3 (Profit center is mandatory).
    Still the entries are hitting to the dummy profit center.
    Thanks

  • Assigning Manual Cost/Profit Center in Sales/Purchase Order

    I don't really know how to describe my problem, so I will instead describe my situation of what I need to do.
    We have all our G/L accounts associated with Cost elements with no Cost/Profit centers set as default.  The cost elements represent our services (ex: internet sale, hardware sale, software sale) and our cost/profit centers represent our employees.  My question is how/where do I assign a cost/profit center manually when creating the sales/purchase order?  Basically I would preferably like to assign the cost/profit center based on the corresponding sales person to the sales order.  For the purchase order we are acting as a middle man between vendor and customer, so how would we assign a manual cost/profit center that pertains to us?
    If you have a good solution to this, please provide detailed steps or instructions with t-codes and walkthroughs as I have very little knowledge about how the cost/profit centers work.  I do understand sales/purchase orders though.

    Hi Lee
    There is a transaction code OKB9 for automatic assignment of Cost Element, Cost Center, Profit Center for a Company Code. There you have to assign the Cost Center and Profit Center combination to a particular cost element.
    I hope this will work out for your problem
    Please let me know it is working or not
    Regards
    Surya

  • Where we can find out customer related profit center assignment.

    Hi gurus
    where we can find out customer related profit center assignment.
    Thank you
    i will assign points.

    Hi,
    Sure you can find that, but before that you need to run F.5D and 1KEK for transferring customer detail to profit center.
    After that you can this report S_ALR_87013343 - Profit Center: Receivables.
    SJ

  • Update the correct profit center in tables BSEG / BSAS / BSIS / BSIK / BSAK

    Hi FI Gurus,
    I am looking after a Support Project in SAP IS-Retail. I am from the FI functional and possess very limited knowledge in FI.
    My client has done the sales posting in SAP using IDOC's. During the postings, it was found that wrong Profit Centers were assigned. Due to this, the sales reports based on Profit Center are coming wrong. It was suggested to the client to reverse the IDOCs, do necessary changes in Profit Centers and re-post the IDOCs. The client wanted a short method to get the reports right. A senior consultant (Non FI) in the Company and the Management are forcing me to write a ABAP program to update certain (not all) FI tables. According to me, it will have some negative impact on the system for which reason I am not ready to take the call as a Project Manager. The management wants me to do the following (I am quoting the same mail which I received from the consultant ) :
    We need to update the correct profit center in tables BSEG / BSAS / BSIS / BSIK / BSAK / BSID / BSAD, wherever the records exists against billing document numbers provided.
    BAPI for updating profit center in Accounting documents: BAPI_ACC_DOCUMENT_POST
    Function Module : 'BAPI_DOCUMENT_CHANGE'
    Also look at SAP Note: Note 966428 - FB02: Functional area (FKBER) can be changed on coding block
    Based on the above, the ABAPer has written the program, the program will update the tables BSEG, BSIS, BSIK, according to the selection criteria of document number, company code and line item number with the new profit centers.
    Please clarify me about the following :
    1. This program is updating profit center in just the FI tables (BSEG, BSIS, BSIK etc.), but the New GL tables (faglflexa and faglflext) which have approx. 65 lakh entries in PRD do not get updated with the correct profit center.
    2. The Controlling tables also do not get updated with this program yet. Also since the previoius updation of Profit centers did not happen correctly, most of the times the controlling document has not been generated at all. Since we will be updating the profit center in just the FI tables, the controlling document will not be created still. Though there are SAP notes suggesting re-creation of the Controlling documents, which is still an option you can choose. Please confirm.
    3. The Special GL also does not get updated because of this.
    This is a very critical and hot issue. My job is at Stake as the Management has threatened me of sacking if I do not follow their directives as they are only concerned with their money.
    Is the consultant who suggested this change RIGHT ?
    Your early replies will help me take the decision.
    Regards

    Hi,
    There is no standard program or BAPI that would update profit centre in a posted document. You should either develop your own process for it,which is not recommended, but sometimes is essential, or reverse the existing documents and post them with the correct profit centre.
    Regards,
    Eli

  • How can we transfer from Dummy profit center to Respective profit center

    How can we transfer from Dummy profit center to Respective profit center?
    Regards
    Rinky shah

    Hi Guru,
    Where ever for GL posting a account assignement as PCA is required, in absense of Profit Centre the entry will flow to dummy profit centre.
    You can use the same distribtion and Assessment (as we do for Cost Centre accounting) for allocation to the valid Profit Centre from the dummy Profit Centre.
    Hope this answers your query.
    Do you think this answer deserve reward points?
    Regards
    Bharat

  • Updating the dummy Profit Center

    Hi Experts
    I  am using the PCA with new GL  , here I have created the dummy profit center  also
    My query is some of the business transaction  are updated in the dummy profit center
    What could be the reason for updating the dummy profit center suppose if I am not give any profit center
    Those entries are getting updating  ?
    In this new Gl concept how to transfer the balance to exact Profit center ?
    Thanks
    Sri

    Hi Venkat
    You should not have activated Classical PCA if you are using New GL.. New GL PCA is a much better functionality
    Anyways, the reason for DUmmy PC is only that you did not assign the PC in the CO Object like Cost Center.. PC is always derived from Cost object. So, if the CO Object has no PC, the line item gets Dummy PC
    There is a SAP note 702854 which offers steps to deactivate Classical PCA.. If you wish you can do that.. There is no harm as such in having Classical PCA, but New GL Is better
    Br. Ajay M

  • Changing of profit center group assigned to one profit center

    Hi,
    Profit Center Group "SMBA-CIN" was erroneously assigned to Profit center PSC021100. I tried to change the profit center group and assigned "SMBA-MALL via Tcode KE52".  After that, I viewed the profit center hierarchy, and found out that PSC021100 now exists in the 2 profit center groups.
    Why is it that PSC021100 exists in the 2 profit center groups?  How can I correct this? Said profit center should exist in SMBA-MALL only.
    Thank you very much for the help.

    Hi,
    Here's the result.
    Ambiguity check for group SMBA SM City Batangas (SMBA) 20090513
    Groups which occur more than once:
    Set Name                 Description
    Path for Set             Description                                   Level
      List contains no data
    Values occuring more than once:
    Overlapping Area                Set Name                 Asl  Asl   Description
      PSC021100 - PSC021100  SMBA-CIN                 001        SMBA-Cinema
      PSC021100 - PSC021100  SMBA-MALL              001        SMBA-Mall
      PSC021200 - PSC021200  SMBA-CIN                 005        SMBA-Cinema
      PSC021200 - PSC021200  SMBA-MALL              002        SMBA-Mall

  • Can I use the "same" button multiple times for multiple galleries?

    OK so I am extremely untrained in CS4 and Actionscript. However I have managed to get along fairly well until I started to dynamically upload images as a gallery. This works great if I have one gallery, but for my site I have 9 galleries!!! I have a back and next button, but I want to be able to use those same buttons for all of the galleries so they look the same. I have split them up and renamed them, but I am clueless on how to script the buttons to work. Please help...and don't laugh at my poor scripting. This is what I have now because I do not know where to put the other button names without getting errors.
    stop();
    next_btn .addEventListener(MouseEvent.CLICK, nextImage);
    var imageNumber: Number=1;
    function checkNumber(): void{
        next_btn.visible=true;
        back_btn.visible=true;
        if(imageNumber==15){
            trace(imageNumber);
        next_btn.visible=false;
        if(imageNumber==1){
            trace(imageNumber);
        back_btn.visible=false;
    function nextImage(evtObj:MouseEvent):void {
        imageNumber++;
        mc_engagement.source= "photo/engagement/en0"+imageNumber+".jpg";
        mc_amish.source= "photo/amish/Amish"+imageNumber+".jpg";
        mc_chicago.source= "photo/chicago/ch"+imageNumber+".jpg";
        mc_landscapes.source= "photo/landscapes/land"+imageNumber+".jpg";
        mc_goodvsevil.source= "photo/goodvsevil/ge"+imageNumber+".png";
        mc_animals.source= "design/animals/an"+imageNumber+".png";
        mc_icons.source= "design/icons/icon0"+imageNumber+".png";
        mc_objects.source= "design/objects/pc"+imageNumber+".png";
        mc_typography.source= "design/typography/type"+imageNumber+".png";
        checkNumber();
    back_btn .addEventListener(MouseEvent.CLICK, backImage);
    function backImage(evtObj:MouseEvent):void {
        imageNumber--;
        mc_engagement.source= "photo/engagement/en0"+imageNumber+".jpg";
        mc_amish.source= "photo/amish/Amish"+imageNumber+".jpg";
        mc_chicago.source= "photo/chicago/ch"+imageNumber+".jpg";
        mc_landscapes.source= "photo/landscapes/land"+imageNumber+".jpg";
        mc_goodvsevil.source= "photo/goodvsevil/ge"+imageNumber+".png";
        mc_animals.source= "design/animals/an"+imageNumber+".png";
        mc_icons.source= "design/icons/icon0"+imageNumber+".png";
        mc_objects.source= "design/objects/pc"+imageNumber+".png";
        mc_typography.source= "design/typography/type"+imageNumber+".png";
        checkNumber();

    I'm still a novice with Flash myself, but I have two comments.
    First, at this point, won't your buttons control all galleries at the same time? Which means, if I go to image 5 in one gallery, then move to another gallery, I'll start at image 5, because the actions are all connected.
    Second, you can definitely use the same buttons for multiple galleries. It seems to me that as long as you've assigned the buttons an instance name, these actions should already work to control all the galleries (see the note above). I guess I would need to understand a bit more about how your project is built.

  • Can I use the same Apple ID for two iPhone's?

    Can I use the same Apple ID on both mine and my partners iPhones? and will there be any troubles or problems that may occur?
    Thank you

    Yes, but there will be quirks. See: http://support.apple.com/kb/HT1495
    What isn't obvious is that you can use different Apple IDs for different functions on your iPhone; for example iCloud, iTunes & App Stores, Game Center, iMessage and FaceTime can all have different Apple IDs from each other.
    If you use the same Apple ID for Find my iPhone then both phone's locations will show up at https://icloud.com/find. Which can be good or bad, depending on your situation.
    If you use the same Apple ID for iTunes & App Stores you can have the same apps and music on both phones; some or all of them.
    You probably want different Apple IDs for iMessage and FaceTime; otherwise, you will get each other's messages
    Also different for Game Center.

  • Can I use the same trip number for several travelers?

    Hi everybody.
    This is my question... We need (in travel expenses) to use any field in order to group (add) several trips made for several travelers (in same dates).
    Expl: several travelers made the same trip (with different receipts and costs). We need to create a "supra-level" group (which could help our user to summarize, authorize, etc).
    I have made some tests changing the trip number assignment (in trip schema) to external one. The system seems not to have any problem if I assign the same trip number to several travelers (please, could you tell me if this is correct?).
    I´m not sure this could be the best solution, because I have one question... If I have travel request and travel expenses... can I assign external range numbers to the travel request? (how can I do it?).
    Please, could you tell me something about this? (if this is not correct, could you tell me if it´s possible to create a new field to do this?)
    Thanks!!!!!!

    Hi,
    As mentionned in an earlier response, you cannot assign the same trip number to multiple employees.
    If you are looking to group together similar claims based on the type of travel which was done, you can always use any of the following fields which can be made 'available' on the entry screen.  That is the 'Activity Type' or the 'Trip Type Specific' or the 'Trip Type Enterprise'.  By creating categories of types of travel, you can then use these values as selection parameters in your reports to isolate specific costs related to specific activities.
    For example, you know that many employees will be traveling for a specific conference and you want to be able to report on the total cost of that conference, you could create an Activity Type and ask employees to complete the field with the appropriate value when completing the claim.  Then you could create a report on that Activity Type only.
    Another option would be to use Internal Orders.  Create an internal order, have the employees assign their costs to the IO and then run a CO - IO report.
    Depending on how 'permanent' your employee groupings are, you could also use some fields on Infotype 17 to assign different employees to different employee groupings.  These employee grouping values are also available as selection parameters in the reports and can allow you to isolate groupings of individuals. 
    It all depends where you want to create the grouping....
    Hope this helps you somewhat...
    Regards,
    Roxanne Dore
    Travel & FI Consultant

  • How to limit the max dialog no that one user can use at the same time?

    Hi,
    I meet one performance problem that one user can open 6 sessions in the GUI and he/she can run 6 reports at the same time witch could occupy 6 dialogs in the sap R/3 instance. It makes poor performance for other users.
    Would you pls tell me how to limit the no. of sessions one user can create at the same time or how to limit the no. of dialogs one user can occupy at the same time?
    Thanks a lot!
    I used this parameters in the default profile as blew:
    rdisp/rfc_check 1
    rdisp/rfc_use_quotas 1
    rdisp/rfc_max_own_used_wp 20 (means: 20%)
    It still didn't work.
    Sean

    Hello,
    We can reserve DIA W.P by giving value to the parameter :- rdisp/rfc_min_wait_dia_wp=1(default)
    that have to necessarily remain free for other users.
    This parameter is used to reserve a number of dialog work processes for Dailog mode.
    For eg. If 10 dialog w.p. are configured for the instance(rdsip/wp_no_dia=10) and the parameter rdisp/rfc_min_wait_dia_wp=3 is set,parallel RFC's can occupy a maximum of 7 DIA W.P.3 DAI W.P. always remain free for dialog mode.
    But now the question is how we assign/restrict this free dialog w.p. to the specific user.
    Reply...
    Regards,
    JUNAID

Maybe you are looking for