Cancel multiple print jobs

How do I cancel multiple print jobs with a Color LaserJet CP 4025? I've tried all of the usual solutions from control panel to turning off the power, disconnecting, etc. Nothing. There are too many print jobs to just use the cancel button. Help! Thanks.
This question was solved.
View Solution.

Hi,
Download and run HP Print and Scan Dr utility from link below
www.hp.com/go/tools
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

Similar Messages

  • How do I cancel a print job from my computer to my HP Photosmart 7510. Touchscreen is unavailable.

    HP Photosmart 7510 All-in-One CQ877a Model C3112; Operating system Windows Vista 64-bit.
    Can't find how to easily cancel a print job. The touch screen is unavailable during the printing process (just shows the HP icon spinning around during the print process). There isn't a "cancel" button or touch area to cancel. We're wasting ink and paper by not being able to cancel jobs easily. Read the 24-page manual and it doesn't mention it. Looked on line for an answer, can't seem to locate one. Can always go to Start, Printers, and select the printer and then cancel from within there, but by then, the job is finished.

    There should be a cancel button (X) on the printer. Check out the pic below taken from page 7 of the User manual for your printer:
    http://goo.gl/mW7Fy
    Alternately, instead of going the Start button route, did you check out the Final tip at the bottom of the article?
    "Final Tip (Shortcut)
    Before using the method above to open the print queue, look for the printer icon in the notification area. If you see it, double-click it to bring up the print queue. "
    If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

  • How to cancel a print job in progress

    I have a HP C5580.  When i was using Windows ME on my former PC, I could easily go to Printers, select the 5580,  hit documents in queue, and hit cancel , and the printer stopped.
    Got a new Compaq  PC with Windows 7, and I can't figure out how to cancel a print job  mid stream.  I go to Printers and Devices, giet the page that allows me to view the print jobs in queue, I hit "print job in process", but the "Cancel" is not in bold print and I can'tfind any other way to cancel the job.
    Help !

    The easiest way to cancel a print job would be by pressing the cancle button on the front panel.  This is the "X" button near the right side of the control panel, see pages 10 and 11 of the user manual here.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • I just upgraded and now can't cancel a print job.

    The icon to delete is not there anymore. It was so easy to cancel. I'm trying to print a photo and it wanted to print on paper. That mistake will waste a lot of ink, so I want to cancel the job, but can't. Of course, I could unplug my printer, but obviously I don't want to have to do that every time I want to cancel a job. Help!

    No it's not, that's the reason you should click the x if you want to cancel a print job. If is has already started, pausing it will pause a partially finished job. Subsequently canceling it may cause corrupted print output or a communications error the printer ought to handle.
    If there is nothing in the print queue then the job has already been sent to the printer and your Mac is finished with it. In that case, use the printer's front panel control to cancel the job.

  • Unable to cancel a print job

    I need to cancel a print job so other things behind it will print.  It still appears in the 'pending jobs' list and will not go away.  It says that it is 'deleting' but it's still there.  What can I do to get rid of it.?  Thank you.

    Hi,
    From the Desktop, hold down the Windows key and press R.  Into the Run window, type services.msc and hit enter.
    Browse down to the print spooler service, right click it and select Properties then click on the Stop button.
    Now browse to C:\Windows\System32\Spool\PRINTERS and delete the job inside this folder - You may need to click a prompt to gain the appropriate authority to open the PRINTERS folder.
    Restart the computer and you should find the job has been removed.
    Regards,
    DP-K

  • Pinter won't print; can't cancel failed print job; cannot print anything

    If I try to cancel a print job,  the printer dialog box claims the print job is being deleted, but it never is.  The only nway I can get rid of the message and clean up the print queue is to reinstall the printer.  This is absurd.  HP's help is anything but.  What is the problem.  I have a Deklsjet 1660.

    Debra,
    Look at my solution just above your post. Go here:
    http://support.microsoft.com/kb/290301/en-us
    Scroll to the bottom of the page for the download link, and download it to your desktop. The link looks like this:
    Download the Windows Installer Cleanup Utility package now.
    Double click the icon that is on your desktop to install it. Startt eh program through "start", then "Programs".
    Find Adobe reader in the list, highlight it and click the "Remove" button.
    Got to www.adobe.com and download Adobe Reader to your desktop, and install it. You should be good to go.

  • How do I cancel a printing job half way through?

    How do I cancel a printing job half way through?  hp psc 1310 series
    This question was solved.
    View Solution.

    Press the "Cancel" button on the printer.  It is the button on the upper left, just below the power button.  See page 2 of the manual here.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Print queue hangs up when I cancel any print job

    I'm using my Photosmart All-in-One C309 printer wirelessly. It prints fine until I need to cancel a print job. As soon as I cancel any job that's currently printing (either in the software or by pressing the cancel button on the printer) the print queue hangs up and the job that I tried to cancel just sits there saying it is being deleted but it doesn't go away and it stops me printing anything else.
    I've discovered a way to clear the stuck job and get the printer going again (using the Troubleshoot option under Devices and Printers) but surely I should be able to cancel a print job without jamming up the queue completely?
    I've had the printer for a year now and it's always had this problem.
    This question was solved.
    View Solution.

    Have you tried to delete and re-add the printer?
    Delete the printer (select it and hit the delete key on your keyboard).  Re-add it this way:
    1. Make sure the printer is turned on and connected to your network. Verify that you can access the printer's internal web page by browsing to its IP address before continuing.
    2. Click >> Start >> Control panel >> Printers.
    3. Click the Add a printer
    4. Select Local printer
    5. Select Create a new port and select Standard TCP/IP Port and click Next button.
    6. Under Device type, select TCP/IP Device. Under Hostname or IP address, enter the printer's host name (found on the printer's network configuration report the generated above). Click Next.
    If you get a message about Additional Port Information Required, then the printer was not found using the host name. You can go back and retry or using the printer's IP address instead of the host name.
    7. Select Hewlett-Packard from the list of manufacturers and select and select your printer model. Click Next.
    If your printer model was not listed, then select Have Disk, browse the HP CD that came with your printer and select the first file that starts with hp and ends with inf. Click Open then OK. Select your printer model. Click Next.
    8. If you are asked, use the currently installed driver.
    9. It will ask for the Printer name -- enter a new name or use the existing one. This will be the name of the printer that you select from other applications.
    10. You may be asked to share the printer. Make a choice and click Next.
    11. The Print Test Page box appears. Go ahead and print it.
    12. Click Finish.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Cannot cancel a print job

    I was trying to print a photo and printer would not load the paper...so I wanted to cancel the print job. I have turned off the printer, I have unplugged it. It is still showing the print job in the cue (says deleting)....but it is not). I do not know what else to do....my printer has been tied up with this for 8 hours.

    Have you tried restarting your computer?
    If that does not clear the queue, you can download and run the HP Print Diagnostic Utility.
    If you don't want to download the utility, this document has step by step instructions and videos for fixing Print Jobs Stuck in Queue.
    I am an employee of Hewlett Packard.
    - - Please mark Accept As Solution if it solves your problem so others can more easily find the answer - -
    - - Please click the Kudos star if you would like to say thanks - -

  • I cannot cancel a print job, cannot print or restart print so other jobs won't print. any help?

    I cannot cancel print job or restart, so I cannot print new job. How do I clear this off?

    Hi,
    From the Control Panel, open Administrative Tools and select Sevices.  Browse down to the print spooler service, right click it and select Properties then click on the Stop button.  Now browse to C:\Windows\System32\Spool\PRINTERS and delete the job inside this folder - You may need to click a prompt to gain the appropriate authority to open the PRINTERS folder.
    Restart the computer and you should find the document(s) have been removed.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • How do I cancel a print job

    How do I cancel a print job

    Are you referring to cancelling print jobs from a computer, or from eprintcenter? If you let me know I can give you the steps to cancel a job.
    Jon-W
    I work on behalf of HP
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    Click the KUDOS STAR on the left to say “Thanks” for helping!

  • I can't delete or cancel a print job

    I sent a photograph to print on my HP Photosmart B209-am printer.  When I waited over an hour for it to print and nothing happened I tried to delete it.  The status has said "deleting" for several hours.  I have run task manager to cancel, I have rebooted my Windows 7 64bit PC, and restarted the printer.  Nothing will delete the print job.  What can I do next?  I can't print anything else until this is resolved.  Thank you!
    This question was solved.
    View Solution.

    Hi,
    From the control panel, open administrative tools and select sevices.  Browse down to the print spooler service, right click it, select Properties and then click on the stop button.  Now browse to C:\Windows\System32\Spool\PRINTERS and delete the job inside this folder.  Reboot the computer and you should be ok. 
    You may need to click a prompt to gain the appropriate authority to open the PRINTERS folder.
    Hope this helps,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • How to cancel a print job on the hp officejet 8600 pro running xp

    How do cancel a print or copy job on the Officejet 8600 Pro Premium?  There is no "cancel" button on the control panel.  Do I have to go through the software?  Time consuming -
       Thanks!
    This question was solved.
    View Solution.

    scarlattid3,
    The cancel button should be located in the bottom right corner of the screen. The only thing is it's not going to show up until you start the print job or copy and then it should appear for you.
    Let us know if you are able to find this.
    If I helped you at all it would be great if you clicked the blue kudos star!
    If I solved your post please mark it as solved to help others.
    I'm a printer tech with HP.

  • Cancel all print jobs via command line

    Hi there,
    I'm trying to write a logout hook that cancels all existing print jobs on my client machines.
    From the man pages of lprm I believe it should be:
    lprm -
    But when I run this as root I get the following returned:
    lprm: The printer-uri attribute is required!
    I used to run this using Apple Remote Desktop under 10.4 and it worked fine, it doesn't work now either remotely or as admin on the client itself.
    Have things changed under Leopard?

    Hi
    +*". . . Have things changed under Leopard? . . ."*+
    Absolutely. Did you have any doubts? For example apropos has disappeared yet the man page is still there. Its not the only thing that has disappeared. Clearly nicl had to go because of NetInfo's demise. These are just some of the differences I've found. No doubt there will be others?
    You could look at the man pages for cancel and lp. They appear to be the same thing. Might be up to what you want?
    Tony

  • Cancel scheduled print jobs

    I want to cancel the disney automatic printing job and cant seem to find a way to do that.

    Hi there,
    You'll need to log into the e-print centre where you first setup the scheduled print delivery and cancel it from there.
    Here is a link to some FAQ's around scheduled printing and how you can go about changing the settings.
    "Although I work for HP, I'm speaking for myself and not on behalf of HP"
    "Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

Maybe you are looking for

  • OCZ DDR3 1333 4gbkit PC3-10666 Reaper on MSI x48c platinum

    Hi to all, i have recently bought this pc and having some problems with it. here is the specs: -msi x48c platinum (bios v.7.4beta previous 7.3) -intel core 2 q9550 -2x2gb OCZ DDR3 1333  PC3-10666 Reaper -ati radeon4850 512mb -seagate 500gb hdd the pr

  • Problem Printing document properties from Word to PDF

    Hello all, This is wierd, I need to print from MS Word doc 2002 SP2 to PDF version 9.3.4.  When I do so, I need to pass the document properties from the word file to the PDF such as author, subject, title, etc.  What is strainge is when i click the p

  • How check what's stored in the data store at different steps in the model?

    I would like to place a table or form temporarily within the model to display the values in the data store as they change at different points at runtime. I tried simply adding a form, creating the same field types as are in the store, and then mappin

  • Simulate frames by loading web page content into DIV

    Hi, does anyone know if there is a way to simulate frames using CSS. Essentially, I want to load the content from another web page into a specific DIV. The content is from another web site, we have permission to use it, but I want it to appear within

  • Custom Mail Forms in CRMD_EMAIL

    Hi Guys, Does any know how to (or is it even possible ) include custom coding for mail forms ? The fields provided in the standard structure does not contain the fields that i need to be displayed on the form output. Thanks, Chun Wei