Canceling a reversing JE initiated using a Winshuttle

In March I iniated an entry to reverse in April using a winshuttle.  It's now April and I decided I no longer want the JE to reverse.  When I run a test F.81 the entry appears as ready to be reversed.
I don't want this entry to reverse and I don't want it 'floating' around in the system.  Can someone please explain to me how I can remove this reversing entry from the F.81 generated list so there is never a possibility of it reversing?
Thanks,
Ryan

Hi Ryan,
I think you are trying to reverse your accrual documents. Take the Document do to FB02 click on header and remove the reversal date.
Hope this helps!!
Br,Vivek

Similar Messages

  • Reversing a document using the bapi 'BAPI_ACC_DOCUMENT_REV_POST'

    Hi All,
    I have posted a document using the FM 'BAPI_ACC_DOCUMENT_POST' and it is working fine .
    How can I reverse the same posted document using the FM
    'BAPI_ACC_DOCUMENT_REV_POST'?
    What are the mandatory parameters to be filled?
    Can anyone explain me with a example
    Thanks in Advance.

    Hi Siva,
    The bapi you have mentioned is the correct one.
    Look at the BAPI documentation which is pretty informative.
    In case you don't have it, i'm just copy pasting it.
    Functionality
    Reversing an external document in Accounting. (negative posting)
    The method "Reverse" can be used to reverse the relevant document in the accounting components.
    Parameters
    REVERSAL
    Reference information for reversal in Accounting
    Description
    Parameter for transferring a reversal document. The reversal document for the source document is not transferred - the reversal documents are generated in the individual components from the documents to be reversed. This is only possible however, if the corresponding documents are available, meaning that line item update is active in all components and no documents have been archived. If this is not the case, an appropriate error message is issued in the return parameter. If this happens, the document can only be reset by means of a corresponding inverse posting by the sender.
    You must make entries in the following fields
    Reversal document number:
    OBJ_TYPE     Sender ID
    OBJ_KEY     Reference number of the reversal document (source document)
    OBJ_SYS     Logical system
    OBJ_KEY_R     Reference number of the document to be reversed.
    Default
    All other fields are transferred from the FI document to be reversed.
    BUS_ACT
    Business Transaction
    Description
    To reverse the document, the same business transaction must be entered that was used for the posting.
    OBJ_TYPE
    Reference procedure
    Source document
    Description
    When a business transaction is updated in Accounting, it may be that several documents are updated at the same time (FI document, CO document, etc). If the business transaction is not initiated in Accounting, a source document must exist outside Accounting. The information from this document must be transferred when the FI/CO interface is called up. The source information is updated in all accounting documents, and is made up of the following fields:
    AWTYP (OBJ_TYPE) Reference transaction
    Sender ID
    AWKEY (OBJ_KEY) Reference key
    Source document number
    The reference key is made up of:
    AWREF Reference document number (10 digits)
    Source document number
    AWORG Reference organizational unit (10 digits)
    Number range ID (if required)
    AWSYS (OBJ_SYS) Logical system
    Logical system of source document
    When the document is being processed, the system checks whether a reference document number (first part of the reference key) has been transferred.
    Notes
    Use a separate value in the OBJ_TYPE field (reference transaction). You must maintain an entry for this value in table TTYP, which could be a function module that is called when the user wants to branch back to the source/sender document from an accounting document. This makes it possible for documents updated using BAPIs to be included in the document navigation (revision). If you use SAP defined characters in the field OBJ_TYPE, errors can occur in the navigation.
    The FI and CO line item suppression is defined separately for each reference transaction.
    It is not necessary to separate the reference key into reference document number and reference organizational unit. This means that reference document numbers that are longer than 10 digits can be transferred into the reference key.
    OBJ_KEY
    Reference Key
    Source document
    Description
    When a business transaction is updated in Accounting, it may be that several documents are updated at the same time (FI document, CO document, etc). If the business transaction is not initiated in Accounting, a source document must exist outside Accounting. The information from this document must be transferred when the FI/CO interface is called up. The source information is updated in all accounting documents, and is made up of the following fields:
    OBJ_SYS
    Logical system of source document
    Source document
    Description
    When a business transaction is updated in Accounting, it may be that several documents are updated at the same time (FI document, CO document, etc). If the business transaction is not initiated in Accounting, a source document must exist outside Accounting. The information from this document must be transferred when the FI/CO interface is called up. The source information is updated in all accounting documents, and is made up of the following fields:
    AWTYP (OBJ_TYPE) Reference transaction
    RETURN
    Return Parameter
    Description
    This table contains the return messages from the method call.
    Value range
    The first message contains the general status of processing:
    Type ID Number Message 
    S RW 605 Document posted successfully  
    S RW 614 Document check without errors 
    A RW 609 Error in document 
    The fields MESSAGE_V1, MESSAGE_V2 and MESSAGE_V3 contain the following information:
    Reference transaction ( OBJ_TYPE)
    Reference key ( OBJ_KEY)
    Logical system of source document ( OBJ_SYS)
    Additional messages are transferred with the following information:
    Parameter ( PARAMETER)
    Row ( ROW)
    Field ( FIELD)
    in which the error occurred.
    REgards.
    Ravi

  • Cancel and Reversal u2013 ARE1

    Dear Friends,
    The user has wrongly created and posted the ARE1 (wrongly combined the multiple excise invoices into single ARE1) and now wants to cancel the same. Selecting the u201CCancelu201D option (Tcode J1IA102), the system triggers the message 'In Process document alone can be cancelledu2019.
    1) The system allows the Reversal of the ARE1 by making the Interest and Duty payable as Zero under the Utilization tab.I doubt this is OK?
    2) Also after reversing the ARE1, when I tried to create the ARE1 referring the excise Invoices again the system triggers XXXXX/2009 excise invoice already referenced in XXXXX/2009 ARE document. Now I need to cancel the existing Excise Invoice & create New Excise and ARE1. Is this the right way to do it?
    3) As the documents are not filed at the Excise, the option would be u2018Cancelu2019 rather than the u2018Reversal of the ARE1u2019? And Pl clarify when should we use the options Cancel and Reversal.
    Thanks
    Isaac

    Dear friend,
    In Export scenarios where ever duty benefits are their ARE1 reversal & calcelling have different meanings,
    1. The reversal process means you are reversing all the related docuements in the process involved , hence the duty payables are reversed & even in case of bond , reversal entries are thrown.
    2.Afer Posting ARE! always reverse is done if the ARE1 has to be cancelled, then cancellation is followed.
    3. If posting is not done, direct cancellation can be done, else reversal is required.
    Regards,
    Akhileshwar K

  • HT203658 How to sign in using the Apple ID that I initially used to set up the computer?

    How to sign in using the Apple ID that I initially used to set up the computer? I cant update my iPhoto and download pictures from Iphone :((
    I updated ios on my MacBook Air to Yosemite, since then I had to update also iPhoto, as it was not compatible with Yosemite. When trying to update it I received this alert "These apps cannot be accepted by your Apple ID. These have already been assigned to another Apple ID." And the solution wud be to sign in using my initial Apple ID, but Im not aware of having one or changing it. I have many Mac devices so I at one point sing in to my Air with another ID not even noticing it and have it since the moment I found out the alert. Can anyone help me with this, please? And also, where are my pictures stored in my Air? Is there some folder, cuz Im used to Windows and Mac is totally new and not really clear to me for now. I need to download pictures from my iPhone and iPhoto seems to be the only way??
    thanks
    elen

    How to sign in using the Apple ID that I initially used to set up the computer? I cant update my iPhoto and download pictures from Iphone :((
    Try to remember any AppleID you ever may have used.
    In the AppStore Application go to the "Store" menu.
    It will show you the AppleiD You are currently using (in the last menu entry "View my account ....".
    Use the "Sign out" command and sign in with any AppleID you ever used, ten check the "Purchases" tab of the App Store, if that will show the bundled apps.
    And also, where are my pictures stored in my Air?
    If you have used iPhoto to download your pictures, the photos will be stored in the iPhoto Library, a package, that is stored in the folder "Pictures" in your Home folder.
    Terence Devlin has written some very useful user tips, that describe the iPhoto Library:  See the links below:
    iPhoto and File Management
    How to Access Files in iPhoto
    Exporting From iPhoto

  • Error while reversing goods issue using VL09

    Hi All ,
      user is getting the error " 4902546971document does not contain any selectable items "  when reverse the GI using  VL09.
    Please find the below document flow.
    Free of Charge 70475917 / 10
    . Purchase order 9900099037 / 10
    . Delivery Standard 80721176 / 10
    .. Shipment 199662 / 1
    .. WMS transfer order 12862453 / 1
    .. Pro Forma Invoice 90070497 / 10
    .. GD goods issue:delvy 4902546971 / 1
    Regards,
    Amar

    Hi,
    Try to reverse the gods issue, with VL09, for document "Delivery Standard" with number 80721176
    Free of Charge 70475917 / 10
    . Purchase order 9900099037 / 10
    . Delivery Standard 80721176 / 10
    .. Shipment 199662 / 1
    .. WMS transfer order 12862453 / 1
    .. Pro Forma Invoice 90070497 / 10
    .. GD goods issue:delvy 4902546971 / 1
    Regards,
    Amar

  • Fetching reversal document Created using FB60

    hi All,
    I have created an invoice using FB60 and reversed the same which is getting stored in RBKP table i have an existing code which returns the invoice reversed using created using mir0 the select query is as below.
    SELECT lifnr xblnr bldat cputm  FROM rbkp     INTO TABLE i_reversal
               FOR ALL ENTRIES IN i_an_ven
               WHERE lifnr = i_an_ven-lifnr AND
                     bukrs = i_an_ven-bukrs AND
                     cpudt >= date_in AND
                     cputm >= time_in AND
                     stblg <> ' '.
    I now want to fetch reverse document created using FB60 which is stored in table BKPF
    Can any one let me know condition what i should apply to fetch the same.
    OR the outline would be helpful
    Thanks,

    Check the field BSTAT = 'B' in BKPF.

  • Cancel a reversed delivery

    Dear Gurus,
    We have posted a delivery last month and that delivery was reversed in this month by mistakenly. Now we need to cancel the reverse document created for this month. How to achieve this? Please advice.
    Thanks,
    Chameendri

    Hello,
    You cannot Cancel a Reversed Delivery. This is so because when you cancalled (Reversed) the Original Delivery the Stock (& valuation) was posted back in your Plant & Company Code. So you cannot cancel a Reversed delivery.
    Only for you is to PGI the Delivery again with back date (if the last month is open in your system). Alternatively you you will have to execute new Delivery in current month.
    Hope this clarifies,
    Thanks,
    Jignesh Mehta

  • GR cancellation or reversal

    Dear all as i explained in the below link i am unable to find out the solution.
    Vendor Reconcillation Account
    please advice me .
    i have created PO in may 2007 and GR has happened in oct 2007, and Goods issues also happened for some qty ,now we are unable to perform invoice verification as i explained in above link.
    1) can i reverse the GR and Perform it again ( i mean can i cancel or reverse the GR because GI happened for these goods)
    2) can i post the invoice through FI entry (FB60)
    Please advice me.
    regards
    venu

    Hello,
    If you have not invoiced you should be able to reverse the GR.
    If you get some errors, I would recommend that you open a ticket in the OSS.
    Best Regards,
    Arminda Jack

  • Canceling or reversing canceled invoice

    Dear all,
    Is there any way I can cancel or reverse a canceled invoice. May this be from SD point or FI point.
    Note: I do not want to generate another invoice against canceled invoice to balance the process.
    Thank you and good day.

    Hi,
    As per the standard rules if you have posted a normal invoice i.e. financial posting and inventory mgt is done with the help of your invoice, cancellation will involve another invoice.
    this can be done with t:code VF11.
    If you have generated a pro forma invoice, then there is no need to generate any other invoice, you can just delete the invoice.
    It is very important to understand that whenever a normal invoice is generated some of the process e.g. inv. mgt and fin. posting occurs and unless you reverse these process you cannot cancel only the invoice.
    hope this helps you.

  • Initial Use Problem, Please Help

    I am using the firewire "transfer information" tool on the initial use of my new MacBook Pro, in order to transfer files from my old Powerbook to this new computer.
    The file transfer screen has been hung up, with 2 hours and 9 minutes remaining for over one hour.
    Does anyone know the best course of action to remedy this opening problem?
    MacBook Pro   Mac OS X (10.4.6)  

    I finally had to manually copy over all files. For some unknown reason, the transfer would hang up on a couple of mp3 files (owned by me - Cake), and then again on a .jpg file, again mine. All I can guess is that these files were corrupt, or accidentally protected, but that was enough to completely stall the transfer. Upside - Apple apps are so much easier to transfer than windows apps, so I was able to use the firewire connection to pick and choose around the trouble files.

  • Reversal Process Model using PUOCBA

    Hi Guys,
    There is a requirement in our Co. to set up a reversal process model using PUOCBA.
    As far as i know, it is a pretty standard process and we need to copy standard process model SAPUSOCV and create our own and use the same in PUOCBA selecting the reversal option.
    I am doing my every steps correctly, but some how in table T52OCG the Processing type field is not converted to 'V' which is necessay for reversal and it does not allow me to do reversal.
    Kindly brief me on the same , if you have face the same kind of problem or have worked on it.
    Regards,
    Ketal Parikh.
    1-847-330-4127

    Hi Jim,
    So this is my understanding. You have two different sequence files that are run for two different Test Environments. These two environments uses two different data structures to perform some initialization on two different instruments.
    The best way to do so without any modification to the sequential process model is to create Sequence File Globals. So lets say that you have test sequence 1 and test Sequence 2. The two data structures will be DataStruct 1 and DataStruct 2. So open your Test sequence 1 in the sequence editor. From the "View" drop down box on the sequence editor, select "Sequence File Types" and create your DataStruct 1 here. Similarly do that same for Test Sequence 2, create DataStruct2.
    Now use the ProcessSetup and ProcessCleanup callback. Again you shouldn't modify your process model. Go to Edit Menu >> Sequence File Callbacks. Select your callbacks and click add. This will automatically add your callbacks to your Test Sequence files. Now you can add the code relevant to your instruments here and you have access to your datastructure as well. The beauty with callbacks is, you can override the ones in your process model by the ones in your sequence files. This is automatically done, when you place the callback in your sequence file. Now we have accomplished what you wanted to do without a single modification to your process model.
    I hope this helps
    Sijin Karayil
    National Instruments

  • HT4972 When trying to update to 5.1.1 it tells me to do it on the computer i initially used with this ipod 4th g.  This is the computer i used initially.  It says i will loose all my music and i don't want to do that.  HELP, Ashley.

    I can't seem to get my ipod 4g to recognize that this computer is the computer i initially used to start this brand new.  It tells me i will loose all my music.  Help please, I guess I'm just stupid!

    If necessary:
    - Transfer iTunes purchases by:
    iTunes Store: Transferring purchases from your iOS device or iPod to a computer
    - Transfer other music by using a third-party progrtam like one of those discussed here:
    Copy music
    --- When everything is on your computer, connect the iPod to your computer and make a backup by right clicking on the iPod under Devices in iTunes and select Back Up
    --- Restore the iPod from that backup
    Note that the backup that iTunes makes does not include synced media like apps and music.
    Sometimes a computer glitch causes the iPod to see the iTunes library as a new one.

  • Report on number of conferences initiated using Conferencing PIN

    Hi All,
    Is there a way to query/report on how many Lync conferences in a given period were initiated using a Conferencing PIN (and not by a participant clicking the link in the meeting notice?)
    We'd like to know how often the conferencing PIN feature is being used to start meetings.

    I don't think Pin information is visible in the monitoring server reports. It should be stored in the database but, you need to make your own query to fetch the information. There's no other easier way around
    http://thamaraw.com

  • Cancel or reverse ARE1

    Hello
    I am facing problem while cancelling and reversing ARE1 document.
    Export excise invoice is posted. ARE1 document is created posted and updated. Then I want to cancel the excise invoice for which I have to cancel or reverse ARE1. It is mandatory.
    So while cancelling ARE1, error occurred: In process document can cancelled.
    While reversing ARE1, 'countersigned by customs document can not be reversed.
    Thanks in advance
    Dhanashree

    Dear Dhanashree
    Are you trying to cancel through <b>J1IH</b>??
    Thanks
    G. Lakshmipathi

  • Cancelling FB08 Reversal Afterwards

    After running FB08 to generate a reversal document for a posted document, is there a way to cancel the reversal and the recently generated reversal document in ECC?

    A reversal document is not a clearing document... I think FBRA is not going to work too.
    I cannot recall any customizing point in order to change this behaviour.
    I think that is not possible.
    Rafa

Maybe you are looking for

  • [Solved] Help needed to interpret errors (python)

    Have the following code (Haven't written it my self and don't know much about how it does what it's supposed to do.): #!/usr/bin/python import sys import os import re import logging import json if sys.version_info < (3, 0): from urllib2 import Reques

  • Search function in interactive PDF

    Hi I am developping an interactive PDF and I would like to embed a search function (not the Ctrl+F option, an actual search button on each page, like on a website). Is that possible? I am curently working in InDesign CS6 Thanks Andrei

  • ILife '11 and a corrupted iPhoto

    I installed iLife '11 and now my iPhoto is corrupted. I tried following the instructions in the past threads but there is no pkg file with the word iPhoto in the name.

  • IMessage not working with some contacts

    I have ipad2, iMessage not working with contacts except between my son and my iPad.  Get a red exclamation mark and send button is greyed out.  Have rebooted, reactivated apple id and email address.  Running latest software. Can anyone help please.

  • Creating shopping cart

    Hello everyone. Hope someone can give me some advice on this. I am developing a site for a music related company.  I will need to create a shopping cart so they can sell cds, accesories and digital downloads. I haven't done anything before that would