Cannot Access Dead Subsite

I have a subsite that of a sudden refuses to open.
When attempting to access the subsite/pages/default.aspx page it just time out. I have little luck tracking down the error. I attempted to open the management page with subsite/_layouts/settings.aspx and get the same time out.
I cant afford to lose the subsites to this one as there is a lot of data there, and those subsites work if navigated directly to.
I have tried iisreset, no help.
All the other subsites at the same level in this collection work.
Whats the best way at this point to recover my dead site?

This is the only thing that looks related?
03/10/2014 11:04:56.56 w3wp.exe (0x3238)
0x27E4 SharePoint Foundation
Monitoring b4ly
High Leaving Monitored Scope (PostResolveRequestCacheHandler). Execution Time=98.2253331079788
e39b6655-41f4-45b1-b890-c853a70625ff
03/10/2014 11:04:56.73 w3wp.exe (0x3238)
0x27E4 SharePoint Foundation
General 72k8
High Failed to determine the setup path of the list schema for feature {D8D8DF90-7B1F-49C1-B170-6F46A94F8C3C}, list template 1104.
e39b6655-41f4-45b1-b890-c853a70625ff
03/10/2014 11:04:56.73 w3wp.exe (0x3238)
0x27E4 SharePoint Foundation
Web Parts 7935
Information http://MySubsite.company.co/default.aspx - An unexpected error has been encountered in this Web Part. Type: Microsoft.SharePoint.WebPartPages.XsltListViewWebPart, Error: An error has occurred.
e39b6655-41f4-45b1-b890-c853a70625ff
03/10/2014 11:04:56.75 w3wp.exe (0x3238)
0x27E4 SharePoint Foundation
General 72k8
High Failed to determine the setup path of the list schema for feature {60D1E34F-0EB3-4E56-9049-85DAABFEC68C}, list template 1100.
e39b6655-41f4-45b1-b890-c853a70625ff
03/10/2014 11:04:56.75 w3wp.exe (0x3238)
0x27E4 SharePoint Foundation
Web Parts 7935
Information http://MySubsite.company.co/default.aspx - An unexpected error has been encountered in this Web Part. Type: Microsoft.SharePoint.WebPartPages.XsltListViewWebPart, Error: An error has occurred.
e39b6655-41f4-45b1-b890-c853a70625ff
03/10/2014 11:04:56.76 w3wp.exe (0x3238)
0x27E4 SharePoint Foundation
General 72k8
High Failed to determine the setup path of the list schema for feature {448E1394-5E76-44B4-9E1C-169B7A389A1B}, list template 1101.
e39b6655-41f4-45b1-b890-c853a70625ff
03/10/2014 11:04:56.76 w3wp.exe (0x3238)
0x27E4 SharePoint Foundation
Web Parts 7935
Information http://MySubsite.company.co/default.aspx - An unexpected error has been encountered in this Web Part. Type: Microsoft.SharePoint.WebPartPages.XsltListViewWebPart, Error: An error has occurred.
e39b6655-41f4-45b1-b890-c853a70625ff
03/10/2014 11:04:56.76 w3wp.exe (0x3238)
0x1170 SharePoint Foundation
Monitoring b4ly
High Leaving Monitored Scope (ExecuteWcfOperation:http://Microsoft.Office.Server.UserProfiles/GetProfileProperties). Execution Time=132.70150256527
03/10/2014 11:04:56.76 w3wp.exe (0x3238)
0x1170 SharePoint Foundation
Monitoring b4ly
High Leaving Monitored Scope (ExecuteOnChannel:GetProfileProperties). Execution Time=134.274607526934
03/10/2014 11:04:57.20 w3wp.exe (0x3238)
0x27E4 SharePoint Foundation
Monitoring b4ly
High Leaving Monitored Scope (Welcome to SharePoint2010). Execution Time=438.806608102426
e39b6655-41f4-45b1-b890-c853a70625ff
03/10/2014 11:04:57.48 w3wp.exe (0x2708)
0x24D8 Excel Services Application
Excel Calculation Services 8jg2
Medium ResourceManager.PerformCleanup: Disk Manager: CurrentSize=165923.
11c5f189-0887-5649-0000-000050f7b00c
03/10/2014 11:04:57.57 w3wp.exe (0x3238)
0x27E4 SharePoint Foundation
Monitoring b4ly
High Leaving Monitored Scope (Powered By). Execution Time=380.995070602549
e39b6655-41f4-45b1-b890-c853a70625ff
03/10/2014 11:04:57.61 w3wp.exe (0x3238)
0x27E4 SharePoint Foundation
Monitoring b4ly
High Leaving Monitored Scope (Add WebParts). Execution Time=888.197522310796
e39b6655-41f4-45b1-b890-c853a70625ff
03/10/2014 11:04:57.82 w3wp.exe (0x3238)
0x27E4 Web Content Management
Publishing ck1b
Medium Populating navigation children for web: /
e39b6655-41f4-45b1-b890-c853a70625ff
03/10/2014 11:04:58.51 w3wp.exe (0x2708)
0x15A8 Excel Services Application
Excel Calculation Services 8jg2
Medium ResourceManager.PerformCleanup: Memory Manager: CurrentSize=369967104.
53fed7f1-0887-5649-0000-000050f7b00c
03/10/2014 11:05:02.98 w3wp.exe (0x27CC)
0x2F74 Excel Services Application
Excel Calculation Services d51n
Medium MossHost.GetEndpointAddress: Server endpoint Uri: http://man-sp2010-02:32843/7e335ebf4d514ca18300e2d56c6e0ad0/ExcelService.asmx.
03/10/2014 11:05:02.98 w3wp.exe (0x27CC)
0x2E14 Excel Services Application
Excel Calculation Services d51n
Medium MossHost.GetEndpointAddress: Server endpoint Uri: http://man-sp2010-01:32843/7e335ebf4d514ca18300e2d56c6e0ad0/ExcelService.asmx.
03/10/2014 11:05:02.98 w3wp.exe (0x27CC)
0x09F4 Excel Services Application
Excel Calculation Services d51n
Medium MossHost.GetEndpointAddress: Server endpoint Uri: http://man-sp2010-03:32843/7e335ebf4d514ca18300e2d56c6e0ad0/ExcelService.asmx.
03/10/2014 11:05:02.98 w3wp.exe (0x27CC)
0x32C8 Excel Services Application
Excel Calculation Services d51n
Medium MossHost.GetEndpointAddress: Server endpoint Uri: http://man-sp2010-04:32843/7e335ebf4d514ca18300e2d56c6e0ad0/ExcelService.asmx.

Similar Messages

Need help getting around the following error: JBO-27101: Attempt to access dead entity in EO.

Hi everyone,
My logic in prepareForDML() updates some attributes (shown in the snippet below) based on whether an insert or update is taking place. But, when I delete a line, I get the following error: JBO-27101: Attempt to access dead entity in EO. So far, I have not been able to catch this error.
        if (operation == DML_INSERT) {
            setLineId((new SequenceImpl("eo_s",
                                        getDBTransaction()).getSequenceNumber()));
            setCreatedBy(createdBy);
            setCreationDate(currentDateAndTime);
            setLastUpdatedBy(lastUpdatedBy);
            setLastUpdateDate(currentDateAndTime);
        } else if (operation == DML_UPDATE) {
            setLastUpdatedBy(lastUpdatedBy);
            setLastUpdateDate(currentDateAndTime);
Any advice would be appreciated. Thanks!
James

Hi Timo,
Thanks for responding. Whenever I delete a line and commit, I get the error. And, since inserts and updates are all that I am interested in, I did not think that I needed deletion logic. The VO contains several EOs, but all are reference EOs that cannot be updated except for the main EO.
Here is the entire prepareForDML() method:
    protected void prepareForDML(int operation, TransactionEvent e) {
        // BEGIN Initial Version
        // Using prepareForDML is a best practice (versus doDML).
        ApplicationModule am;
        boolean lineIsValid;
        byte entityState;
        byte postState;
        Date currentDateAndTime;
        Date weekEndingDate;
        Number createdBy;
        Number lastUpdatedBy;
        String amConfiguration;
        String amDefinition;
        String entityStateText;
        String operationText;
        String postStateText;
        ServicesAMImpl servicesAMImpl;
        Timestamp timeStamp;
        // amDefinition = "com.model.services.ServicesAM";
        // amConfiguration = "ServicesAMLocal";
        // am = Configuration.createRootApplicationModule(amDefinition, amConfiguration);
        createdBy = new Number(-1); // TODO fnd_profile.value('USERNAME')
        entityState = getEntityState();
        entityStateText = null;
        operationText = null;
        postState = getPostState();
        postStateText = null;
        lastUpdatedBy =
                new Number(-1); // TODO fnd_profile.value('USERNAME'); is there a last login id?
        // servicesAMImpl = (ServicesAMImpl)am;
        // lineIsValid = servicesAMImpl.callValidateLineProcedure(getBillable());
        timeStamp = new Timestamp(System.currentTimeMillis());
        currentDateAndTime = new Date(timeStamp);
        // TODO Should weekEndingDate be in the callValidateLineProcedure()?
        weekEndingDate =
                commonCode.nextDay(getActivityDate(), Calendar.THURSDAY);
        setWeekEndingDate(weekEndingDate);
        // TODO See https://community.oracle.com/message/9542286?tstart=14.
        // if (entityState != Entity.STATUS_DELETED & entityState != Entity.STATUS_DEAD)...
        System.err.println("prepareForDML - getLineId: " + getLineId());
        switch (operation) {
        case DML_DELETE:
            operationText = "Delete";
            break;
        case DML_INSERT:
            operationText = "Insert";
            break;
        case DML_UPDATE:
            operationText = "Update";
            break;
        System.err.println("prepareForDML - operationText: " +
                           operationText); // TODO
        // System.out.println("prepareForDML - operationText: " + operationText); // TODO
        switch (entityState) {
        case Entity.STATUS_INITIALIZED:
            entityStateText = "Initialized";
            break;
            // Don't do anything.
        case Entity.STATUS_UNMODIFIED:
            entityStateText = "Un-Modified";
            break;
            // Don't do anything.
        case Entity.STATUS_DEAD:
            entityStateText = "Dead";
            break;
            // Don't do anything.
        case Entity.STATUS_DELETED:
            entityStateText = "Deleted";
            break;
            // entity.revert();
            // entity.refresh(Entity.REFRESH_CONTAINEES);
        case Entity.STATUS_MODIFIED:
            entityStateText = "Modified";
            break;
            // entity.refresh(Entity.REFRESH_UNDO_CHANGES);
        case Entity.STATUS_NEW:
            entityStateText = "New";
            break;
            // entity.refresh(Entity.REFRESH_FORGET_NEW_ROWS);
            // entity.refresh(Entity.REFRESH_REMOVE_NEW_ROWS);
        default:
            entityStateText = String.valueOf(entityState);
        System.err.println("prepareForDML - entityStateText: " +
                           entityStateText);
        switch (postState) {
        case Entity.STATUS_INITIALIZED:
            postStateText = "Initialized";
            break;
            // Don't do anything.
        case Entity.STATUS_UNMODIFIED:
            postStateText = "Un-Modified";
            break;
            // Don't do anything.
        case Entity.STATUS_DEAD:
            postStateText = "Dead";
            break;
            // Don't do anything.
        case Entity.STATUS_DELETED:
            postStateText = "Deleted";
            break;
            // entity.revert();
            // entity.refresh(Entity.REFRESH_CONTAINEES);
        case Entity.STATUS_MODIFIED:
            postStateText = "Modified";
            break;
            // entity.refresh(Entity.REFRESH_UNDO_CHANGES);
        case Entity.STATUS_NEW:
            postStateText = "New";
            break;
            // entity.refresh(Entity.REFRESH_FORGET_NEW_ROWS);
            // entity.refresh(Entity.REFRESH_REMOVE_NEW_ROWS);
        default:
            postStateText = String.valueOf(postState);
        System.err.println("prepareForDML - postStateText: " + postStateText);
        // DeadEntityAccessException
        if (operation == DML_INSERT) {
            setLineId((new SequenceImpl("eo_s",
                                        getDBTransaction()).getSequenceNumber()));
            setCreatedBy(createdBy);
            setCreationDate(currentDateAndTime);
            setLastUpdatedBy(lastUpdatedBy);
            setLastUpdateDate(currentDateAndTime);
        } else if (operation == DML_UPDATE) {
            setLastUpdatedBy(lastUpdatedBy);
            setLastUpdateDate(currentDateAndTime);
        // Configuration.releaseRootApplicationModule(am, true);
        // END Initial Version
        super.prepareForDML(operation, e);
Here is the entire doDML() method:
    protected void doDML(int operation, TransactionEvent e) {
        // BEGIN Initial Version
        // This logic is for troubleshooting only.
        String operationText;
        operationText = null;
        switch (operation) {
        case DML_DELETE:
            operationText = "Delete";
            break;
        case DML_INSERT:
            operationText = "Insert";
            break;
        case DML_UPDATE:
            operationText = "Update";
            break;
        System.err.println("doDML - operationText: " + operationText); // TODO
        // System.out.println("doDML - operationText: " + operationText); // TODO
        // END Initial Version
        super.doDML(operation, e);
James

My Imac is ejecting every disk inserted in it, I cannot access the disks, can any body help me troubleshoot the problem.

My Imac is ejecting every disk inserted in it, I cannot access the disks, can any body help me troubleshoot the problem

The frist thing to try is a drive-n disk. They are cheap (US$5-15) and easy to use. Many unresponsive drives, even ones declared "dead" by an Apple tech, have returned to service after a cleaning.
Check with home entertainment specialty shops, electronic superstores and office supply outlets that sell computer accessories.

Acrobat X Pro - cannot access formscentral

acrobat X Pro - cannot access formscentral to access online templates - dead link. also, will there be something to replace formscentral when it dies in July?

https://formscentral.acrobat.com/SignIn.html??state=%7B%22ac%22%3A%22formscentral.acrobat. com%3AA-WEB%3ALogin%22%2C%22av%22%3Anull%2C%22di%22%3Anull%2C%22mc%22%3Anull%2C%22pl%22%3A null%7D&code=eyJhbGciOiJSUzI1NiIsIng1dSI6Imltc19uYTEta2V5LTEuY2VyIn0.eyJpZCI6IjE0MjY2MDA1O DE4OTktZDI5ZjMxMTQtM2YzNC00YzdlLTk5NTMtOTViZjhmYTI2ZDA3Iiwic2NvcGUiOiJBZG9iZUlELG9wZW5pZCx vcmlnaW5hbF9jcmVkZW50aWFscyIsInN0YXRlIjoie1wiYWNcIjpcImZvcm1zY2VudHJhbC5hY3JvYmF0LmNvbTpBL VdFQjpMb2dpblwiLFwiYXZcIjpudWxsLFwiZGlcIjpudWxsLFwibWNcIjpudWxsLFwicGxcIjpudWxsfSIsImFzIjo iaW1zLW5hMSIsImNyZWF0ZWRfYXQiOiIxNDI2NjAwNTgxODk5IiwiZXhwaXJlc19pbiI6IjE4MDAwMCIsInVzZXJfa WQiOiI1RDE2NzJEQzUyNDlEQUI4MEE0OTBENDVAQWRvYmVJRCIsImNsaWVudF9pZCI6ImFkb2JlZm9ybXNjZW50cmF sIiwidHlwZSI6ImF1dGhvcml6YXRpb25fY29kZSJ9.iZsC-AYZGM7ShRc4KCQvz4DzYOqnvsd8pFXidVG9Zg9F6zOe lPuBptLM1IB6liMiJMQonyKqghMDBJ9P3kfWw29kjpWD4k8Muc2-lgFI9p6CFFWygD-mK6I1P_mY0-3iSwGfprIW9L O3--ZwdW3R-nQeXk_tRn5aokNkQKxqzPa4CcBM4IzBZsv8nhU9zxZOrC9szc-HDeD5LL59krrQGZGjkse5XyKu681t A7ik3byDpbb5KwsvvWkyk5iVNx5OwymCY5-9iKUxCrWlhxdScEwsMbxFcRdxz3E6y-KkMBR4bL06jPYk-pMbZpmDn3 1T3UMDeTlp1dXHvJfOE2zRPA
Continuous loop.

Add-spshelladmin : Cannot access the local farm - SharePoint 2013

Hello,,
We installed a SharePoint tool on a SharePoint 2013 server, and now the site is down. One error is happening:
add-spshelladmin : Cannot access the local farm. Verify that the local farm is
properly configured, currently available, and that you have the appropriate
permissions to access the database before trying again.
Prior to installing this tool, the SharePoint PowerShell was working. I am running the power shell with admin rights. The farm account is still in the local admin group, and its in the WSS_RESTRICTED_WPG_V4 group. All commands and the site were
working fine, until we installed the tool.
How can I get the PowerShell Management shell working again?
Thanks.
Paul

It sounds like your tool has brought down SharePoint or messed with your permissions. Restart the server and then starting at the SQL work your way through SQL connections, IIS Application Pools, IIS Sites, event logs and so on until you find a reason for
where the farm is broken.
Also try to identify what exactly else is and isn't working. If the entire farm is dead then complaining that PowerShell doesn't work is like complaining that your water seems to be seeping into your stateroom on the titanic and it's getting the carpet damp,
it may be true but it's not the most significant issue...

HT4061 I cannot access my device. The screen is blank however it has power. The phone will ring but since the screen is blank i canot answer.

I cannot access my device. The screen is blank however it has power. The phone will ring but since the screen is blank I cannot answer. It seems to be dead but has power?

When restoring to factory defaults/new iPod fails to resolve a problem that indicates a hardware problem an an appointent at the Genus Bar of an Apple store is in order.
Check your warranty coverage here:
Apple - Support - Check Your Service and Support Coverage

Cannot access login page and no wireless signal

Hello, I am using a WRT54G ver 2 router, everything was working fine until a couple of days, when just out of the blue my wifi stopped working, the wireless light does not lit on the router, I tried resetting, disconnecting the router and modem, and upgrading the firmware(which I cannot because I cannot access the setup page) and nothing seems to work, hopefully someone here can help me,
Thank you
JB

After a firmware upgrade you must reset the router to factory defaults, then setup the router again from scratch. If you saved a router configuration file, DO NOT use it.
To reset your router to factory defaults, use the following procedure:
1) Power down all computers, the router, and the modem, and unplug them from the wall.
2) Disconnect all wires from the router.
3) Power up the router and allow it to fully boot (1-2 minutes).
4) Press and hold the reset button for 30 seconds, then release it, then let the router reset and reboot (2-3 minutes).
5) Power down the router.
6) Connect one computer by wire to port 1 on the router (NOT to the internet port).
7) Power up the router and allow it to fully boot (1-2 minutes).
8) Power up the computer (if the computer has a wireless card, make sure it is off).
9) Try to ping the router. To do this, click the "Start" button > All Programs > Accessories > Command Prompt. A black DOS box will appear. Enter the following: "ping 192.168.1.1" (no quotes), and hit the Enter key. You will see 3 or 4 lines that start either with "Reply from ... " or "Request timed out." If you see "Reply from ...", your computer has found your router.
10) Open your browser and point it to 192.168.1.1. This will take you to your router's login page. Leave the user name blank, and in the password field, enter "admin" (with no quotes). This will take you to your router setup page. Note the version number of your firmware (usually listed near upper right corner of screen). Exit your browser.
If you get this far without problems, try the setup disk (or setup the router manually, if you prefer), and see if you can get your router setup and working.
If you cannot get "Reply from ..." in step 9 above, your router is dead.
If you get a reply in step 9, but cannot complete step 10, then either your router is dead or the firmware is corrupt, or your firewall is still turned on. In this case, turn off the firewall, and if you still cannot complete step 10, then use the Linksys tftp.exe program to try to reload your router with the latest firmware. (If you have already reloaded the firmware with tftp.exe, and you still cannot complete step 10, then the router is dead.) After reloading the firmware, repeat the above procedure starting with step 1.
If you need additional help, please state your ISP, the make and model of your modem, your router's firmware version, and the results of steps 9 and 10. Also, if you get any error messages, copy them exactly and report back.
Please let me know how things turn out for you.
Message Edited by toomanydonuts on 03-26-2008 02:10 AM

When i login with microsoft account cannot access with administrative share c$

i have a problem when i login to windows with microsoft account cannot access any network computer with administrative sharing c$,d$ with windows 8.1
but when i login with local account can access
and some people tell me create key in regedit t fix it
after enter user name and password show this error
and i apply your instruction and not fix until now
note:
my Machine windows 8.1 if another machine in network windows 7 can access a hidden share if machine in network windows 8.1 show this message in image 2
but if i login with local user can i access all machine hidden share network windows 7 and 8.1

yes this computer i want to access name poland2-work and have two users
first :administrator
second : poland 2

Cannot access my Iphone 3gs after upgrading to 5.01

Hi,
I bought an unlocked Iphone 16BG 3Gs from eBay. I used it for a week
TillI connected my Iphone to ITunes and they notify me I needed to upgrade my
Software and I accept.
That was the mistake I made as it upgraded to 5.01 and I cannot access
myphone. When I put on my phone I am getting the activation screen. I try completing the activation but with no success. When I connect my phone to USB and start Itunes I am getting error message
"There is no Sim card installed in the Iphone your are attempting to
activate"
I tired the following with no success.
Itried downgrading from 5.01 to 4.33 by downloading firmware from google. Holding shift button and clicking restore onITunes, selecting the firmware but I am getting error message" Iphone“Iphone” could not be restored. An unknown error occurred (3194)
I also tried using RedSn0w program and Tiny Umbrella and no luck at all.
Please help.
Thanksyou,
Charles.

Is the SIM that is installed from the carrier the device is locked to?
Was the device hacked or jailbroken? Possibly to unlock the device?

Hi. I am using a time capsule for few PC s. I have made 5 different account to access time capsule. but in windows when i enter account name and password for one account, i cannot access other accounts, because windows saves username

Hi. I am using a time capsule for few PC s. I have made 5 different account to access time capsule. but in windows when I enter account name and password for one account, i cannot access other accounts, because windows saves username. how can i prevent this from happenning. I really need to access all my accounts and dont want it to save automaticlly.

Why have 5 accounts if you need to access all of them.. just have one account?
Sorry I cannot follow why you would even use the PC to control the Time Capsule. Apple have not kept the Windows version of the utility up to date.. so they keep making it harder and harder to run windows with apple routers.

I copied a lot of photos from an iphone to a DVD using a Windows 7 laptop, now I cannot access those photos on the DVD. HELP!

I copied a lot of photos from an iphone to a DVD using a Windows 7 laptop, now I cannot access those photos on the DVD. HELP! In Windows Exlporer I can see the data on the disk in the details but when I click on it nothing appears as if there is nothing on it.

It should. So they aren't shown in the Last Import smart album, right? Try the following:
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - Run Option #4, Rebuild Database, followed by Option #1 if needed.
OT

Access to SSO login when client cannot access port 7777

We have a situation in which some of our users are behind internet firewalls that only allow access to port 80.
I already have the middle tier/portal using port 80 but SSO is using 7777. Is there an easy way to make sign on available via port 80?
IMPORTANT: Both infrastructue and middle tier on are the same windows server.
Thanks.
Message was edited by:
swassoc

Hi Doung,
I tried you method and after failed some times i found out;
inside the dads.conf
database string : localhost: 1521:ORCL ....
but when you want to loggin on your web browse, you cannot use 1521.
you need to use 7777
http://localhost:7777/pls/apex
it worked!
But I cannot access the admin page as what the manual said use the same method:
http://localhost:7777/pls/apex_admin
It said the page was not found???????????????
And I don't know how to login to the apex.
I typed in I think the right infromation:
workspace: orcl
user name: ADMIN
password: oracle( and I know it is right)
but I cannot login.
Andy idea?

Crashes when running applications from network share - "Windows cannot access the file for one of the following reasons"

Hi,
starting a couple of weeks ago, we get the following error(s) when running applications from a network share. We don't know what causes this, we are not aware of any major changes in our network infrastructure or client/Server configuration. We did upgrade
a lot of machines to Windows 8, but the issue also occurs on older Win7 computers.
We figured out a workaround though: The applications run fine when launching from a FQDN share (like
\\share.domain.Company.com) and only cause problems when running from
\\share directly. They have worked fine for years without FQDN though.
Any ideas?
Error Details (the Kind of error differs greatly):
# 1 #
Log Name: Application
Source: Application Error
Date: ...
Event ID: 1005
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: vmDEV
Description:
Windows cannot access the file for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program XYZ
because of this error.
Program: XYZ
File:
The error value is listed in the Additional Data section.
User Action
1. Open the file again. This situation might be a temporary problem that corrects itself when the program runs again.
2. If the file still cannot be accessed and
- It is on the network, your network administrator should verify that there is not a problem with the network and that the server can be contacted.
- It is on a removable disk, for example, a floppy disk or CD-ROM, verify that the disk is fully inserted into the computer.
3. Check and repair the file system by running CHKDSK. To run CHKDSK, click Start, click Run, type CMD, and then click OK. At the command prompt, type CHKDSK /F, and then press ENTER.
4. If the problem persists, restore the file from a backup copy.
5. Determine whether other files on the same disk can be opened. If not, the disk might be damaged. If it is a hard disk, contact your administrator or computer hardware vendor for further assistance.
Additional data
Error value: C000020C [ also seen with code C00000C4]
#2 (German error Messages from now on, we only use German OSes, the above english one is translated based on similar error Messages I found on the web) #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea67c3
Name des fehlerhaften Moduls: clr.dll, Version: 4.0.30319.34014, Zeitstempel: 0x52e0b784
Ausnahmecode: 0xc0000006
Fehleroffset: 0x00026549
ID des fehlerhaften Prozesses: 0x13ac
Startzeit der fehlerhaften Anwendung: 0x01d055a854d36445
Pfad der fehlerhaften Anwendung: \\share\application.exe
Pfad des fehlerhaften Moduls: C:\Windows\Microsoft.NET\Framework\v4.0.30319\clr.dll
Berichtskennung: 949ea933-c19b-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
Anwendung: XYZ.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: Ausnahmecode c0000006, Ausnahmeadresse 720B6549
Stapel:
# 3 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
   bei SP.Forms.AutoCompleteSelectionBase.OnEnter(System.EventArgs)
   bei System.Windows.Forms.Control.NotifyEnter()
   bei System.Windows.Forms.ContainerControl.UpdateFocusedControl()
# 4 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
   bei System.IO.UnmanagedMemoryStream.ReadByte()
   bei System.IO.BinaryReader.ReadByte()
   bei System.IO.BinaryReader.Read7BitEncodedInt()
   bei System.Resources.ResourceReader._LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
   bei System.Resources.ResourceReader.LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
   bei System.Resources.ResourceReader.LoadObject(Int32, System.Resources.ResourceTypeCode ByRef)
   bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean, Boolean)
   bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean)
   bei System.Resources.ResourceManager.GetObject(System.String, System.Globalization.CultureInfo, Boolean)
   bei System.Resources.ResourceManager.GetStream(System.String, System.Globalization.CultureInfo)
# 5 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
   bei System.Reflection.RuntimeParameterInfo.get_Name()
   bei System.Diagnostics.StackTrace.ToString(TraceFormat)
   bei System.Environment.GetStackTrace(System.Exception, Boolean)
   bei System.Exception.GetStackTrace(Boolean)
   bei System.Exception.ToString(Boolean, Boolean)
   bei System.Exception.ToString(Boolean, Boolean)
   bei System.Exception.ToString(Boolean, Boolean)
   bei System.Exception.ToString()
# 6 #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea834f
Name des fehlerhaften Moduls: KERNELBASE.dll, Version: 6.3.9600.17278, Zeitstempel: 0x53eeb460
Ausnahmecode: 0xe0434352
Fehleroffset: 0x00012f71
ID des fehlerhaften Prozesses: 0xa68
Startzeit der fehlerhaften Anwendung: 0x01d0559cb7ec4ed6
Pfad der fehlerhaften Anwendung: \\share\XYZ.exe
Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\KERNELBASE.dll
Berichtskennung: 010514d0-c190-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
# 7 #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea7a6e
Name des fehlerhaften Moduls: ntdll.dll, Version: 6.3.9600.17630, Zeitstempel: 0x54b0d74f
Ausnahmecode: 0xc0000006
Fehleroffset: 0x0006db27
ID des fehlerhaften Prozesses: 0x18dc
Startzeit der fehlerhaften Anwendung: 0x01d0559cb08529c3
Pfad der fehlerhaften Anwendung: \\share\xyz.exe
Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\ntdll.dll
Berichtskennung: ef389186-c18f-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:

Hi,
>>The applications run fine when launching from a FQDN share
It sounds like a DNS suffix issue. When this issue occurs, please try to ping share on the client, then check if the corresponding IP address is correct. If the IP address is wrong, please adjust your settings of DNS to make sure that the client can resolve
the share correctly.
If it's very hard to change the settings of the DNS for some reason, as a work around, we can add the entry into the clients' hosts file.
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Error on load: System.IO.IOException: The process cannot access the file : error in event viewer when users want to view documents from this third party deployed scan solution

Error on load: System.IO.IOException: The process cannot access the file
'\\server1\SCANSHARED\.pdf' because it is being used by another process.
   at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
   at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)
   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share)
   at System.IO.File.WriteAllBytes(String path, Byte[] bytes)
   at abc.Scan.Layouts.ICC.Scan.View.Page_Load(Object sender, EventArgs e)
I faced this error in event viewer when users want to view documents from this third party deployed scan solution
here I have two WFS servers and they configured with load balancing in F5 .
when I enable both servers in F5 I receive this error messages in 2nd server,
when users want to view documents
adil

Do you have antiVirus installed on the sharepoint servers?
These folders may have to be excluded from antivirus scanning when you use file-level antivirus software in SharePoint. If these folders are not excluded, you may see unexpected behavior. For example, you may receive "access denied" error messages when files
are uploaded.
Please follow this KB and exclude the folders from Scanning.
http://support.microsoft.com/kb/952167
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Windows 7 pro client cannot access folders on server 2003 domain server

I added a windows 7 64 bit client to a server 2003 32 bit domain 3 weeks ago and file sharing was working fine until today, 5/4/12. Now, when trying to access shared folders that reside on the server,
I get the following "access denied" message:
[…folder…] is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.
The user name could not be found.
Strangely enough...
The windows 7 client
can open shared folders that reside on the XP clients in the domain
All the XP clients in the domain can access the server 2003 folders
All the XP clients and the server 2003 machine can access shared folders and printers on the windows 7 client.
The windows 7 client can ping the server 2003 machine and vice versa
I can “see” the server in my network list, but when I click on it, I get the same “access denied” message listed above.
So... the only problem is that the windows 7 client cannot access folders that reside on the windows server 2003 machine. There must be some sharing setting that got changed
by a recent windows update.
Here is what I have done/verified so far on the windows 7 client:
In advanced sharing settings for Home/Work, Public and Domain profiles:
network discovery is enabled
file and print sharing is enabled
use user accounts and passwords to connect to other computers is selected (I also tried allowing windows to manage homegroup connections instead, but the problem remained.)
40 -56 bit encryption is enabled
In “gpedit.msc” Local Policies/Security Settings:
enabled the following policies:
Network access: Allow anonymous SID/name translation
Network access: Let Everyone permissions apply to anonymous users
disabled the following policies:
Network access: Restrict anonymous access to Named Pipes and Shares
Network access: Do not allow anonymous enumeration of SAM accounts
Network access: Do not allow anonymous enumeration of SAM accounts and shares
What am I missing? Are there policies on the server that need to be adjusted?
Please help! My business is crippled if I cannot access server files from this workstation. Thank you in advance.

As this thread has been quiet for a while, we assume that the issue has been resolved. At this time, we will mark it as ‘Answered’ as the previous
steps should be helpful for many similar scenarios.  <o:p></o:p>
If the issue still persists and you want to return to this question, please reply this post directly so we will be notified to follow it up. You
can also choose to unmark the answer as you wish.  <o:p></o:p>
In addition, we’d love to hear your feedback about the solution. By sharing your experience you can help other community members facing similar
problems.  <o:p></o:p>
Thanks!<o:p></o:p>
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Cannot Access Dead Subsite

Similar Messages

Maybe you are looking for