Cannot apply Hyper v Replica ip failover. [RESOLVED]

Hello,
I'm using Hyper with replica server. I have two hosts in Windows Server 2012 with hyper v installed and last integration installed both sides on each VM.
I have set up the failover ip on each side, and when I try to failoer a machine evryhting work good execpt the ip failover... I have this error : 
« xxxx» n’a pas pu appliquer les paramètres IP à l’adaptateur « {6f71b925-f7d3-4f7a-b987-ca787eca5643} » : Erreur non spécifiée (0x80004005). (ID d’ordinateur virtuel 3B423647-943C-444C-9E2A-E8C24973B643)
English : « xxxx»cannot apply ip settings to the adaptor« {6f71b925-f7d3-4f7a-b987-ca787eca5643} » : non specified error (0x80004005). (ID d’ordinateur virtuel 3B423647-943C-444C-9E2A-E8C24973B643)...
+
System
Provider
[ Name]
Microsoft-Windows-Hyper-V-Integration-KvpExchange
[ Guid]
{82D60869-5ADA-4D49-B76A-309B09666584}
EventID
4132
Version
0
Level
2
Task
0
Opcode
0
Keywords
0x8000000000000000
TimeCreated
[ SystemTime]
2013-12-14T15:02:24.884325200Z
EventRecordID
359
Correlation
Execution
[ ProcessID]
4192
[ ThreadID]
1368
Channel
Microsoft-Windows-Hyper-V-Integration-Admin
Computer
xxxx
Security
[ UserID]
S-1-5-83-1-994195015-1145869372-3269995166-1136030537
UserData
VmlEventLog
VmName
xxxServer
VmId
3B423647-943C-444C-9E2A-E8C24973B643
String
{6f71b925-f7d3-4f7a-b987-ca787eca5643}
ErrorCodeString
%%2147500037
ErrorCode
0x80004005
Is someone can help me, I'm stucked for one week now and cannot find any solutions... Thank you very much...

Hi,
I am glad that this issue is solved. Thank you very much for your sharing.
This solution you provided will help lots of people who have similar issues.
Please feel free to ask us if there are any issues in the future.
Best Regards,
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

  • Hyper-v Replica: Planned Failover from Cluster to another Cluster Failed

    Hi Guys,
    i have one issue and i cannot find a way to troubleshooting
    i Have one Primary Site running 8 nodes Hyper-v with Failover Cluster and Hyper-v Replica Broker confguration
    i have one Replica Site  running 8 nodes Hyper-v with Failover Cluster and Hyper-v Replica Broker
    Replica Broker Configuration:
    https://onedrive.live.com/redir?resid=45C59B28F67FC71C%212271
    both side are pinging and name resolution is ok
    all ports are open
    The Virtual Machine Replication is ok
    The Planned Failover cannot complete and show me this simple error
    "failed" 
    i have no message on event Viewer
    Error:
    https://onedrive.live.com/redir?resid=45C59B28F67FC71C%212270
    Planned Failover from Cluster (Primary site) to another Cluster (Replica site) with Replica
    Start Hyper-V Manager pr failover cluster console on the primary server and choose a virtual machine to fail over.
    1. Turn off the virtual machine that you want to fail over.
    2. Right-click the virtual machine, point to Replication, and then point to
    Planned Failover.
    3. Click Fail Over to actually transfer operations to the virtual machine on the Replica server.

    Hi Samuel,
    In the original post :
    Tests: 1 -
    Planned Failover from Cluster to StandAlone Hyper-v is ok
    Test: 2
    Planned Failover from Standalone hyper-v to Cluster is ok
    Test:3
    Planned Failover from Cluster (Primary site) to another Cluster (Replica site) with Replica
    There is no  standalone hyper-v to standalone hyper-v between two sites .
    After the last test , if they still can not do planned failover , maybe you can focus on network configuration .
    Best Regads
    Elton Ji
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Hyper-V Live Migration Compatibility with Hyper-V Replica/Hyper-V Recovery Manager

    Hi,
    Is Hyper-V Live Migration compatible with Hyper-V Replica/Hyper-V Recovery
    Manager?
    I have 2 Hyper-V clusters in my datacenter - both using CSVs on Fibre Channel arrays. These clusters where created and are managed using the same "System Center 2012 R2 VMM" installation. My goal it to eventually move one of these clusters to a remote
    DR site. Both sites are connected/will be connected to each other through dark fibre.
    I manually configured Hyper-V Replica in the Fail Over Cluster Manager on both clusters and started replicating some VMs using Hyper-V
    Replica.
    Now every time I attempt to use SCVMM to do a Live Migration of a VM that is protected using Hyper-V Replica to
    another host within the same cluster,
    the Migration VM Wizard gives me the following "Rating Explanation" error:
    "The virtual machine virtual machine name which
    requires Hyper-V Recovery Manager protection is going to be moved using the type "Live". This could break the recovery protection status of the virtual machine.
    When I ignore the error and do the Live Migration anyway, the Live migration completes successfully with the info above. There doesn't seem to be any impact on the VM or it's replication.
    When a Host Shuts-down or is put into maintenance, the VM Migrates successfully, again, with no noticeable impact on users or replication.
    When I stop replication of the VM, the error goes away.
    Initially, I thought this error was because I attempted to manually configure
    the replication between both clusters using Hyper-V Replica in Failover Cluster Manager (instead of using Hyper-V Recovery Manager).
    However, even after configuring and using Hyper-V Recovery Manager, I still get the same error. This error does not seem to have any impact on the high-availability of
    my VM or on Replication of this VM. Live migrations still occur successfully and replication seems to carry on without any issues.
    However, it now has me concern that Live Migration may one day occur and break replication of my VMs between both clusters.
    I have searched, and searched and searched, and I cannot find any mention in official or un-official Microsoft channels, on the compatibility of these two features. 
    I know vMware vSphere replication and vMotion are compatible with each otherhttp://pubs.vmware.com/vsphere-55/index.jsp?topic=%2Fcom.vmware.vsphere.replication_admin.doc%2FGUID-8006BF58-6FA8-4F02-AFB9-A6AC5CD73021.html.
    Please confirm to me: Are Hyper-V Live Migration and Hyper-V Replica compatible
    with each other?
    If they are, any link to further documentation on configuring these services so that they work in a fully supported manner will be highly appreciated.
    D

    This can be considered as a minor GUI bug. 
    Let me explain. Live Migration and Hyper-V Replica is supported on both Windows Server 2012 and 2012 R2 Hyper-V.
    This is because we have the Hyper-V Replica Broker Role (in a cluster) that is able to detect, receive and keep track of the VMs and the synchronizations. The configuration related to VMs enabled with replications follows the VMs itself. 
    If you try to live migrate a VM within Failover Cluster Manager, you will not get any message at all. But VMM will (as you can see), give you an
    error but it should rather be an informative message instead.
    Intelligent placement (in VMM) is responsible for putting everything in your environment together to give you tips about where the VM best possible can run, and that is why we are seeing this message here.
    I have personally reported this as a bug. I will check on this one and get back to this thread.
    Update: just spoke to one of the PMs of HRM and they can confirm that live migration is supported - and should work in this context.
    Please see this thread as well: http://social.msdn.microsoft.com/Forums/windowsazure/en-US/29163570-22a6-4da4-b309-21878aeb8ff8/hyperv-live-migration-compatibility-with-hyperv-replicahyperv-recovery-manager?forum=hypervrecovmgr
    -kn
    Kristian (Virtualization and some coffee: http://kristiannese.blogspot.com )

  • Unplanned automatic failover using Hyper-v Replica , why don't the VMs start up automatically on the replica server?

    Hi,
    We have cluster with two hosts (Host01 , host02) replicated to another server (Replica01)
    in order to test automatic failover to the replica server  (Replica01) We unplugged the power cables from Host01 and Host 02 
    now the VMs on the replica server is still off  , why don't the VMs start up  automatically on the replica server?
    Ramy Shaker

    overall there is no automatic failover in Hyper-V
    Of course there is. It's enabled by Failover Clustering. This is a totally separate technology from Hyper-V Replica.
    There is no automatic start up in Hyper-V Replica because it is not designed to detect a split-brain condition where the same virtual machine is running in multiple locations simultaneously. The replica site has no way to know why it can't reach the primary
    system anymore. It might just be because someone unplugged a network cable. If the primary's virtual machines are still running and the replica decides to spin up its copies, you will have many troubles.
    Eric Siron Altaro Hyper-V Blog
    I am an independent blog contributor, not an Altaro employee. I am solely responsible for the content of my posts.
    "Every relationship you have is in worse shape than you think."

  • Hyper-V replica vs Shared Nothing Live Migration

      Shared Nothing Live Migration allows to transport your VM over the WAN without shutting it down (how much time it takes on io intensive vm is another story)
      Hyper-V replica does not allow to perform the DR switch without shutdown operation on primary site VM !
      why can't it take the VM live to the DR ?
      that's because if we use Shared Nothing across the WAN, we don't use the data that Hyper-V replica can and then it also breaks everything hyper-V replica does.
      Point is: how to take the VM to DR in running state, what is the best way to do that ?
    Shahid Roofi

    Hi Shahid,
    Hyper-V Replica is designed as a DR technology, not as a technique to move VMs. It assumes that should you require it, the source VM would probably be offline and therefore you would be powering up the passive copy from a previous point in time
    as its not a true synchronous replica copy. It does give you the added benefit to be able to run a planned failover which as you say, powers of the VM first, runs a final Sync then powers the new VM up. Obviously you cant have the duplicate copy of this VM
    running all the time at the remote site, otherwise you would have a split brain situation for network traffic.
    Like the live migration the shared nothing live migration is a technology aimed at moving a VM, but as you know offers the ability to do this without having shared storage and only requires a network connection. When initiated moves the whole
    VM, well copies the virtual drive and memory before sending machine writes to both, then only to the new VM when they both match. With regards to the speed, I assume you have the SNLM setup to compress data before sending across the wire?
    If you want a true live migration between remote sites, one way would be to have a SAN array between both sites synchronously replicating data, then stretch the Hyper-V cluster across both sites. Obviously this is a very expensive solution but perhaps
    the perfect scenario.
    Kind Regards
    Michael Coutanche
    Blog:   
    Twitter:   LinkedIn:
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

  • Hyper-V Replica Doesn't Seem to Replicate Expanded VHDX File?

    I'm running Microsoft Windows Server 2012 R2 Essentials as a VM on Microsoft Hyper-V Server 2012 R2 (Server Core).  I am using Hyper-V replica and extended replication to copy the Essentials VM to two backup Hyper-V servers.  This has been working
    for months.
    This evening my 2 Tb VHDX used by Essentials VM was nearly out of space.  I took down the VM and expanded the VHDX to 4 Tb. Then I restarted Essentials and used Disk Manager to allocate the new 2 Tb to give me a 4 Tb of space for Essentials to use.
     The primary VM seems to be working normally.
    But Hyper-V replication doesn't seem to be functioning correctly.  I'm wondering if I'll need to delete the replication and start over since the size of the VHDX increased compared to the original configuration?
    When I try and get replication to resume (from primary to secondary) I am prompted to resync which I have attempted many times. The primary creates a snapshot and then after a few moments the snapshot is merged back into the primary VM. But the VHDX on the
    secondary still shows it is 2 Tb in size.  So the resynchronization doesn't seem to have completed correctly?  Plus I have the option to "Resume Replication" from the primary which also implies the prior resyncrhonization failed.
    I haven't found any error messages using Server Manager to explain why the resync seems to fail.
    At one point I found I was able to resync from the secondary to the tertiary server.  I don't know what that actually accomplished, but both still have a 2 Tb VHDX instead of the 4 Tb that should now be available.
    Any ideas on how to get replica and extended replica to work without having to delete and start replication over from the beginning?
    Thanks for any assistance.
    Theokrat

    There was an error message that I'd overlooked and unfortunately this tells me I'll have to delete and restart replication from the beginning.
    Cannot perform operation for virtual machine 'Windows Essentials 2012 R2' as virtual size of one or more virtual hard disks are different between primary and Replica servers. Delete and re-enable replication. (Virtual machine ID xxxxxxx)
    Theokrat

  • Server 2012: Enabling Hyper-V Replica Site to Site Failure

    We recently installed Server 2012 Data Center with Hyper-V on a two servers at two different sites: Main Site and DR Site.
    Hyper-V is enabled and working great at both sites on these servers and now trying to configure Hyper-V replica gets us this result:
    Some of the items we made sure to verify:
    Enabled Firewall rules for inbound rules on Port 80. (Hyper-V Replica HTTP Listener) (Both Sites)
    Modified ASA Firewall for HTTP port 80 and can run a packet trace from site to site.
    Ping works fine in communication between servers
    Both are in the same domain
    Within the same Trust Group
    Same default storage location and can view the folder from each location
    So I am not sure what we are missing, but is there another port that needs to be open if we are going through HTTP because after starting to configuring the replica another message shows that "Could not get the configuration details of the specified server."
    Searching around on TechNet didn't show any resolution for this, but if anyone would have some additional tips to try to troubleshoot that would be greatly appreciated!
    Thank you!
    -Jeff

    Hi All,
    I am facing the same issue, Please let me the solution... I have given permission to user account at Local Groups in both nodes of Primary Site and DR Site.. and Windows Firewall is also off, IP Subnet is Different at both End...
    Brief Description of Infrastructure.
    We have Setup Windows Cluster 2012 Failover Cluster in Both Sites ( primary and DR) with the help of mentioned links.
    http://www.thomasmaurer.ch/2012/07/hyper-v-replica-the-game-changer/
    http://kristiannese.blogspot.in/2012/03/hyper-v-replica-by-example-part-one.html
    Now, We want to cross-check Hyper-V Replica functionality but it is saying that Port 80 is not opened, Need Suggestion on same.
    Windows Firewall inbound rules is already set as per above links.
    Question: From where to where we need to open port 80 means which nodes/cluster/Hyper-V Broker ? As per mentioned cases.
    Like,
    Case 1. From Hyper-V broker of Primary Site to Hyper-V Broker of DR Site
    Case 2: From Physical IP Address of Both Servers at Primary Site to Physical IP of Both Server at DR Site.
    Case 3: From Cluster IP Address of Primary Site to Cluster IP of DR Site.
    Case 4. From Physical IP Address of Primary Site to Hyper-v Replica Broker of DR Site.
    Case 5. Port 80 need to open between Both End for Physical IP’s, Hyper-V Replica Broker and Cluster IP.
    Kindly suggest on urgent basis.
    Note: It is working fine in same IP Subnet, only change with different Subnet.
    Please suggest from which IP to which IP , port 80 Need to be open in Mentioned scenerio.
    Primary Site.
    Host 1 IP address : 10.25.135.25
    Host 2 IP address : 10.25.135.26
    Cluster IP Address : 10.25.135.27
    Hyper-V Replica Broker Role : 10.25.135.28
    DR Site
    Host 1 IP Address : 10.103.48.100
    Host 2 IP Address : 10.103.48.101
    Cluster IP address : 10.103.48.27
    Hyper-V Replica Broker Role: 10.103.48.28
    I hope , now you can help me.
    Thanks
    Kirpal Singh

  • 2 Hyper-V Servers with Failover Cluster and a single File Server and .VHDs stored on a SMB 3 Share

    I have 2 X M600 Dell Blades (100 GB local storage and 2 NICs)  and a Single R720 File Server (2.5 TB local SAS storage and 6 NICs).  I´m planning a Lab/developer enrironment using 2 Hyper-V Servers with Failover Cluster and a single File Server putting
    all  .VHDs stored on a SMB 3 Share on the File Server.
    The ideia is to have a HA solution, live migration, etc, storing the .VHDs onm a SMB 3 share
    \\fileserver\shareforVHDs
    It is possible? How Cluster will understand the
    \\fileserver\shareforVHDs as a cluster disk and offer HA on it?
    Or i´ll have to "re-think" and forget about VHDs on SMb 3 Share and deploy using iSCSI?
    Storage Spaces makes difference in this case?
    All based on wind2012 R2 STD English version

    I have 2 X M600 Dell Blades (100 GB local storage and 2 NICs)  and a Single R720 File Server (2.5 TB local SAS storage and 6 NICs).  I´m planning a Lab/developer enrironment using 2 Hyper-V Servers with Failover Cluster and a single File Server putting
    all  .VHDs stored on a SMB 3 Share on the File Server.
    The ideia is to have a HA solution, live migration, etc, storing the .VHDs onm a SMB 3 share
    \\fileserver\shareforVHDs
    It is possible? How Cluster will understand the
    \\fileserver\shareforVHDs as a cluster disk and offer HA on it?
    Or i´ll have to "re-think" and forget about VHDs on SMb 3 Share and deploy using iSCSI?
    Storage Spaces makes difference in this case?
    All based on wind2012 R2 STD English version
    You can do what you want to do just fine. Hyper-V / Windows Server 2012 R2 can use SMB 3.0 share instead of a block storage (iSCSI/FC/etc). See:
    Deploy Hyper-V over SMB
    http://technet.microsoft.com/en-us/library/jj134187.aspx
    There would be no shared disk and no CSV just SMB 3.0 folder both hypervisor hosts would have access to. Much simplier to use. See:
    Hyper-V recommends SMB or CSV ?
    http://social.technet.microsoft.com/Forums/en-US/d6e06d59-bef3-42ba-82f1-5043713b5552/hyperv-recommends-smb-or-csv-
    You'll have however a limited solution as your single physical server being a file server would be a single point of failure.
    You can use Storage Spaces just fine but you cannot use Clustered Storage Spaces as in this case you'll have to take away your SAS spindles from your R720 box and mount them into SAS JBOD (make sure it's certified). So you get rid of an active components
    (CPU, RAM) and keep more robust all-passive SAS JBOD as your physical shared storage. Better then a single Windows-running server but for a true fault tolerance you'll have to have 3 SAS JBODs. Not exactly cheap :) See:
    Deploy Clustered Storage Spaces
    http://technet.microsoft.com/en-us/library/jj822937.aspx
    Storage Spaces,
    JBODs, and Failover Clustering – A Recipe for Cost-Effective, Highly Available Storage
    http://blogs.technet.com/b/storageserver/archive/2013/10/19/storage-spaces-jbods-and-failover-clustering-a-recipe-for-cost-effective-highly-available-storage.aspx
    Using
    Storage Spaces for Storage Subsystem Performance
    http://msdn.microsoft.com/en-us/library/windows/hardware/dn567634.aspx#enclosure
    Storage
    Spaces FAQ
    https://social.technet.microsoft.com/wiki/contents/articles/11382.storage-spaces-frequently-asked-questions-faq.aspx
    Alternative way would be using Virtual SAN similar to VMware VSAN in this case you can get rid of a physical shared storage @ all and use cheap high capacity SATA spindles (and SATA SSDs!) instead of an expensive SAS.
    Hope this helped :)
    StarWind VSAN [Virtual SAN] clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts.

  • Does Lync Server 2013 support Hyper-V Replica

    I can’t find a definitive answer on this.  I plan on either having 2 Standard Edition Lync 2013 Servers, or use Hyper-V replica for disaster recovery. 
    I’m expecting some down time during the failover.  Looking for the simplest and most cost effective solution.

    Hi,
    It is not supported. Here are similar cases:
    http://social.technet.microsoft.com/Forums/windows/en-US/ce08024b-6516-44b6-9fb0-76e9c02b1da2/does-lync-2013-support-hyperv-replica?forum=lyncdeploy
    http://social.technet.microsoft.com/Forums/windows/en-US/d5882edc-e25c-4d09-9079-d6f8e90d4035/does-lync-2013-support-hyperv-replica?forum=winserverhyperv
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Question for "Hyper-V replica" and "replica server"

    On the replica server, is it possible to have and operate other VMs, that are not replicas to existing VMs ?

    Hello DimiterS,
    Yes, sure you can run VM workloads on both Hyper-V hosts which are participating in Hyper-V Replica and vice versa.
    For example, you can have DC01 on HV01 and DC02 on HV02 and then replicate DC01 to HV02 and DC02 to HV01.
    No, you cannot have replication from Hyper-V 2012 to Hyper-V 2012 R2, you need to maintain the same Windows Server version on the physical host.
    One advise, I would strongly recommend you to exclude the Paging File disk from replication, you can change the location of the System Page File inside the Guest OS to another disk/volume and then exclude it during the replication wizard, this will help
    to reduce the replicated traffic and I/O since the paging files are constantly changing. More information
    here.
    Hope this help.
    Regards,
    Charbel Nemnom
    MCSA, MCSE, MCS, MCITP
    Blog: www.charbelnemnom.com
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark
    as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Hyper-V Replica Trust Group...

    Hi all;
    As you know, when configuring Hyper-V Replica on a Replica Server, it able use to specify multiple primary servers. Right?
    As I can specify which servers are trusted to replicate to replica server, why bother me to create a Trust Group  and join that primary servers to it? What is the primary purpose of creating Trust Group?
    Thanks
    Please VOTE as HELPFUL if the post helps you and remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
    the thread.

    Hi Sir,
    >> What is the primary purpose of creating Trust Group?
    "How is this useful? Hyper-V Replica allows replication to continue seamlessly when virtual machines are migrated either on the primary server/cluster or Replica server/cluster. Hence the
    replication traffic for a given Replica virtual machine cannot be tied only
    to the server that enabled replication of the virtual machine. "
    "Tag to group a set of such allowed primary servers into a trust zone (Security Tag).
    http://blogs.technet.com/b/virtualization/archive/2012/04/09/configure-your-replica-server-to-receive-replication-traffic-from-specific-primary-server-s.aspx
    Best Regards,
    Elton JI
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

  • Hyper-V Replica Capacity Planner stuck getting VM information

    I'm trying to use the Capacity Planner for Hyper-V replica tool to estimate requirements for a replica site.
    It keeps getting stuck "Getting the VM and VHD from primary site, this can take upto several minutes...". I've waited over an hour, and it still sits there.
    The primary site is a 3 node Hyper-V 2012R2 cluster. I have installed and configured the Hyper-V Replication Broker role on the cluster. For now, it's set to use HTTP without any certificates.
    I don't have a replica site yet, so I've selected "Skip tests involving Replica site". For the primary site, I've tried pointing it at both the replication broker, and at one of the individual nodes. It gets stuck in the same place.
    Other things I've tried:
    Disabled windows firewall on all 3 nodes
    Running the tool from one of the nodes, logged in as a domain admin account
    Moving all the VMs off of one node, and pointing the tool at that now empty node
    Let it run for longer - left it alone overnight.
    Downloaded the tool again in case it was corrupt
    Rebooted my computer
    In all cases, it gets stuck at the exact same spot.
    Any idea how to figure out why it is freezing? Have I missed configuring something important for the tool to run?

    Hi Grant,
    Thanks for your reply.
    The tool and documentation have been updated for Windows Server 2012 R2
    and can be download from here:
    http://www.microsoft.com/en-us/download/details.aspx?id=39057 
    Would you please update it and see if it helps.
    Best Regrds,
    Susie
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • HT201210 I'm trying to restore my iPhone, but get an error message 'the iPhone cannot be restored, the device cannot be found.  How can I resolve this?

    I'm trying to restore my iPhone, but get an error message 'the iPhone cannot be restored, the device cannot be found.  How can I resolve this?

    iOS: Unable to update or restore

  • 2012 R2 Hyper-V Replica and Cross Domain

    Customer would like to user Hyper-V Replica, but their local site and DR site are different domains.
    I know we need certificate. Is there any guide for this? I didn't find any configuration document, thanks. 

    Hi Sir,
    Please refer to the similar thread :
    https://social.technet.microsoft.com/Forums/windowsserver/en-US/420d239c-0475-480f-aa9c-c094d9ae226b/server-2012-hyperv-replication-cross-site-and-cross-domain?forum=winserverhyperv
    Also the article below is a lab test about hyper-v replica based on certificate :
    https://social.technet.microsoft.com/Forums/en-US/c3e309b6-1d5d-4e52-b859-cf36bd5af47d/forum-faq-how-to-implement-hyperv-replica-in-workgroup-environment?forum=winserverhyperv
    Best Regards,
    Elton Ji
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

  • How to apply hyper link for a particular cell in the column?

    Year
    2001
    2002
    2003
    2004
    I wanna apply Hyper link for 2001 only! How to achieve this?
    Can we apply no. of hyper links for a column?

    You have to create a conditional variable.
    For eg. create a variable with hyperlink in the syntax for Year.
    Now if else logic, so if YEAR=2001, return hyperlink else YEAR object.
    Hope you understood.
    Thanks
    Gaurav

Maybe you are looking for