Cannot complete dump using db1_dump185

We have an older BerkeleyDB database file of 22810624 bytes. When we dump using:
./db1_dump185 -p dbfile
it ends with the following error
db1_dump185: seq: Cannot allocate memory
We were using DB_File perl module to read/write the database but either it became corrupted or reached some size limit and now we can't access all the data.
Can anyone help with suggesting as to how to retrieve all the information in the database?

Similar Messages

Cannot complete form using Adobe Reader - Mac OS X 10.6.8

I have been using Adobe Reader to complete forms for my Bank for more than 9 months without any problems. I'm using Adobe Reader 10.1.1 for Mac. I recently upgraded my OS from 10.5.8 to 10.6.8 and this is the first time I've tried to use Adobe Reader since the upgrade. Today when I opened my form using Adobe Reader I cannot select and type in any of the text fields. Trying to click inside a text box simply seems to 'select' the entire page.
I checked online but could not find any compatibility issues. I'm hoping that I've overlooked something very simple that I should have done but have no idea what that could be.
I would be very grateful if someone could advise me what my problem might be.
Cheers
Tricia

Thanks for responding Ankit. No, I saved the form to a folder on my desktop and I open it using the Adobe Reader app. It has always worked without a problem before. I checked my husband's iMac (which has the same saved form on his Desktop). He is also running OS X 10.6.8. On his machine it opened without a hitch so I used his computer to fill in the form and print it out. Obviously, if it works on his computer and he's also using 10.6.8 it's not related to the upgrade.
I trashed my copy of Adobe Reader and have re-downloaded the app. Will install it and see whether it now works or if the problem persists. Will post back the results.'
Cheers
Tricia

I am using a 2003 eMac and am running on Mac OSX vs 10.4.11. iTunes is not recognizing music I have purchased and when I try to connect when it request me to I get the following error message: Cannot complete i Tunes Store request. A required iTunes com

I am using a 2003 eMac and am running on Mac OSX vs 10.4.11. I amrunning iTunes 8.2.1 (6) and not able to upgrade iTunes on this computer. iTunes is not recognizing music I have purchased and when I try to connect when it request me to I get the following error message:
Cannot complete iTunes Store request. A required iTunes component is not installed (-42404)
Please help.

Is this music purchased back in DRM days? I don't actually have any iTunes music so I can't test with my iTunes 7.5, but I know that without iTunes 10 you cannot even connect to the store anymore. I wouldn't think that would require an active connection to the store all the time, otherwise how could you play music on a computer in the middle of nowhere? Did you do something to trigger iTunes suddenly wanting to connect and check on machine authorization?

HT1218 How do I troubleshoot this: Time Capsule cannot complete the backup. The backup disk image "/Volumes/Data/ MacBook Pro.sparsebundle" is already in use.

This is the second time I've encountered this issue with Time Capsule using Time Machine automatic backup. I haven't found the following specific error message in the list of troubleshooting issues: "Time Capsule cannot complete the backup. The backup disk image “/Volumes/Data/MacBook Pro.sparsebundle” is already in use."
I'm not certain what causes this issue. I think it may have something to do with having to force shutdown with apps still open when the beachball hangs and the MacBook has to be rebooted.
Has anyone else dealt with this issue?

Welcome to Apple Support Communities
Restart your Mac and the Time Capsule. In most of the cases, this should solve the problem.
If it doesn't work, see > http://pondini.org/TM/C12.html

I have paid for ipages 09 on 15/05 but never succed to enter the serial code. After 45 days, altough I was charged by 20 chf, I cannot completely use all ipages tools(impossible to save ). How can I get again the serial code I paid for?

i have paid for ipages 09 on 15/05 but never succed to enter the serial code. After 45 days, altough I was charged by 20 chf, I cannot completely use all ipages tools(impossible to save ). How can I get again the serial code I paid for?

Getting the request for a serial number means that at some time you had the iWork ’09 trial installed. You need to delete the trial & then reinstall from the boxed DVD or the Mac App Store. The files to delete are the iWork ’09 folder from the main HD > Applications; the iWork ’09 folder in HD > Library > Application Support & the individual iWork application plist files found in HD > Users > (your account) > Library > Preferences for each user. The easiest way to fix the problem is to use Yvan Koenig's AppleScript that removes the files. You can find it on his box.com account in for_iWork'09 > other_iWork'09 items > uninstall iWork '09.zip. Download uninstall iWork '09.zip, decompress it, open it in AppleScript Editor and click the Run button.
Apple's support article on the subject says it's due to having a copy of the trial that is a higher version that the one you've purchased, but I'm not sure that is very common. This problem started with Snow Leopard & it seems to be some code in the iWork installers that doesn't do what it should.

I'm using a Mac. When I tried to open my iPhoto library in Elements I get the error message "cannot complete request PE doesn't recognize this type of file"?

I use a Mac. When I try to open my iPhoto Library in Elements I get the error message "cannot complete request, PE does not recognize this type of file." The import option only allows me import a "frame from Video"?

You can't use iPhoto that way. Poking around in the iphoto library from outside iphoto is just begging for trouble, the fastest way to corrupt your library and lose all your images.
You have two choices with iphoto:
1. Set PSE as your external editor and send the photos from iphoto. Save, never save as, and don't change the name or format and iphoto will remember your last saved edits and the original, although you have to lose the edited version to revert to the original. This doesn't work with raw files.
2. Export the photos from iphoto, use File>Open in PSE and then you can make all the changes to name and format that you want. Then import the saved edited version to iphoto as a new file.

I am now using 10.6.8. Downloaded Maverick but cannot update OS on HD because get message the disk is not formatted as Mac OS extended(journaled). Tried to use Disk Utility as per instruction but cannot complete operation.

I am now using 10.6.8. Downloaded Maverick but cannot update OS on HD because get message the disk is not formatted as Mac OS extended(journaled). Tried to use Disk Utility as per instruction but cannot complete operation.

Barney-15E:
The partition method worked after some trepidation. I got the spinning beach ball after partitioning and couldn't go further till I named the second partition. That may have done it. Right now, things seem to be working o.k. I'm updating a current iPhoto and will have to get a MS Word program that will function on the current OS and a current Quicken.
If necessary, can start up from the 10.6.8 system which I downloaded to an external HD before updating. I can always fall back on that. Also, I hope I don't get too many disconnects. Thank you for your help.

Time Machine cannot complete backup

My time machine backup cannot complete because it thinks there is not enough disk space. After trying a number of things, I decided to start over by reformatting my backup disk (I have a secondary backup). I have a 2TB external disk. I have a 2TB internal disk that is 95GB full. Certainly there must be some overhead for the backup process, but it can't double the backup. I'm trying to do a full backup on an empty, newly formatted disk. The message is:
The backup disk ran out of space unexpectedly. Time Machine will try to make more space available by removing expired backups during the next scheduled backup.
I'm using OSX Mavericks 10.9.4
Any ideas?

These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the word "Starting" (without the quotes.) You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard."
Each message in the log begins with the date and time when it was entered. Note the timestamp of the last "Starting" message that corresponds to the beginning of an an abnormal backup. Now
CLEAR THE WORD "Starting" FROM THE TEXT FIELD
so that all messages are showing, and scroll back in the log to the time you noted. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ If all you see are messages that contain the word "Starting," you didn't clear the text field.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. Don't post more than is requested.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.

Cannot Send Messages Using the Server

I am dependent (during the day) on a wireless connection to the Minneapolis Wi-Fi system (U.S. Wireless).
I've got an e-mail account with comcast and I have successfully interfaced this with the Apple Mail application that came with OS X 10.5.4 and for many weeks have been happily sending and receiving e-mails. But....
I've been on the road and had to connect with Hotel internet services and I was picking up free WiFi in NYC when I was there.
I first noticed the problem when I was staying at a hotel in Vermont.
I would try to send e-mails and I would get the message:
CANNOT SEND MESSGE USING THE SERVER __________.
Select a different outgoing mail server....
Now, I am back home and using my U.S. Wireless connection (which has been really bad lately).
I keep getting these blasted messages and my mail sometimes goes through but more than often, I get these "cannot send message.." notices and my e-mail just sits there going nowhere in the outbox.
How can I solve this problem?

Beside the SMTP name -- smtp.comcast.net -- there is a pair of arrows, with one pointing up and one pointing down. If you click on those arrows you will be presented with a list of all SMTP ever enter (you may only have one), and also the command to Edit Server List. If you choose Edit Server List, you will be presented with a completely new setup window, dealing only with SMTP servers, and that window will have two tabs, one of which is also Advanced.
From the name, smtp.comcast.net, without your Username appended, would indicate that an Authentication of None is currently in effect. With changes that Comcast has made recently, whether you use Port 25 or Port 587, I believe you would have to use Password Authentication, most certainly if the latter Port 587 is chosen.
If you click on the link below, although not for Comcast, you will nevertheless see in section 12 through 15, screenshots that cover the SMTP setup that I am describing above.
http://wildblueworld.com/dishmail.net/howdoi-applemail.php#2
Ernie

Excel 2010 cannot complete this task... Error in a shared spreeadsheet

The layout
A server in an office connects 5 computers running windows 7 and using MS office plus 2010(32bit) and 1 computer running XP using MS office plus 2007(32bit), they are all 64bit OS's besides xp. They share many spreadsheets that are opened, edited and updated
simultaneously off the server. Since the spreadsheets need to be referred to each other, 2 up to 5 excel files must be opened on the computer I'm working on.
I'm working with a computer that has the following error during reading and writing to spreadsheets.
"Excel cannot complete this task with available resources choose less data or close Other applications"
This error occurs simply because excel has used up all the resources. However I'd like to avoid the simple "close redundant spreadsheets" because sooner or later they will need to be used.
The problem is that its only one computer that is having this problem all other computers don't get this error despite having equal amount of spreadsheets opened as the problematic computer. We've upgraded the ram and graphics card on that computer yet problem
persists. I'm aware of the 2gb ram access restriction office 32bit has.
The only solution I can think of would be to install a 64 it version of office on this computer set the default program that opens the file to the 64bit excel version (only for the problematic computer). Will cause errors? Seeing as other computers run 32bit
office?
Does anyone know of any other ways of doing this? When the error occurs the file is locked and all data that is entered into the file after that is lost. Thanks in advanced

Hi,
Do these five pcs have the same hardware?
As far as I know, the above memory error messages can be very generic and don't always identify the real cause of the issue. Please follow the KBs below, try the methods and check if they are helpful.
http://support.microsoft.com/kb/2779852
http://support.microsoft.com/kb/2655178
Then, I agree with you, we can update the Excel to 64bit version. Because the max RAM usage of the Excel 2010 32bit version is 2 GB. Even if we add more physical memory, 32bit version won’t be able to use it. I recommend you use Excel 64bit
version to open/edit the large workbook instead. The 64-bit version of Excel 2010 is not constrained to 2 GB of RAM usage like 32-bit applications does.
Hope it's helpful.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Error Message: "Excel cannot complete this task with available resources" when creating pivot table with Excel 2013

Hi,
One of our users encountered this problem with Excel 2013 while creating pivot tables, particularly with large files. We tried to modify Virtual Memory
of the pc but error still persist. Why does this happen and how can we resolve this? Thanks.
Another error message encountered by the user, this time when opening large files. The files she tried to open are working fine in 2010. But when opened in 2013, it prompted : "There
isn't enough memory to complete this action. Try using less data or closing other applications."

Hi,
In regarding of the issue, please provide us more information to assist you better.
Did your user using the Excel 2013 and Excel 2010 with same PC? If not, please let me know the both of the 2 PCs' hardware list/Windows operation system info.
Did you using Excel 2013 32bit version and Excel 2010 64bit version?
General speaking, this issue usually occurs with Office 2013 32 bit version. It has a limitation of 2Gb of memory that can be used by its process. And the 64-bit Excel can handle larger workbooks.
Thus, if your user using 32bit Excel, I recommend try 64bit Excel instead.
Here is a similar issue, we also could try it:
http://answers.microsoft.com/en-us/office/forum/office_2007-excel/excel-cannot-complete-the-task-with-available/d31b1822-ebde-4c9b-8d11-e54bb652847d
If you have any update, please feel free let us know.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

HT1386 Trying to sinc my iphone:says cannot complete b/c comp isn't authorized

I am trying to sinc my iphone to the same computer i always use - it starts and then stops saying it cannot complete the sinc because the computer is no longer authorized to make purchases. it then tells me how to authorize my computer - but it is... so i tried deauthorizing and reauthorizing - trued sincing again.... and same thing happens.... grrrr

Try re-booting your iPhone (That is sometimes the answer), or
Try doing this second:
http://support.apple.com/kb/HT1420?viewlocale=en_US&locale=en_US
Or, try doing this:
http://support.apple.com/kb/TS1389?viewlocale=en_US&locale=en_US
Good Luck

"Cannot complete iTunes store request..." error solved

As posted elsewhere here, repeated clicking between "iPhone" and any other header such as "Music" or "Playlists" in the iTunes browser has solved this error message:
"Cannot complete iTunes store request - network connection was reset. Make sure your connection is active and try again."
After about 45 minutes I got the message: "Restoring iPhone from backup"
It is now sloowwly restoring my original iPhone (No usb 2.0 on the old PowerBook G4 400)
Hammered Apple servers = tried patience. Keep trying!

I don't know if this will help you guys, but it worked for me...
I've been having the exact same problem since upgrading to iTunes 9. Installed the recent update to 9.0.1.8 with no change--still no icons when the Store comes up, long vertical layout, 306 error when clicking on anything.
I'm on an older Windows box with XP installed, Safari 4.0.3, iTunes 9.0.1.8. I use Firefox for the web. Though it WAS installed, I had never used Safari on this machine. Went to take a look at Safari and see if there was anything wrong.
I found that Safari was NOT set up properly to get through my Firewall--again, I had never used it before. As soon as I got the internet settings right in Safari and made sure it could get to the web properly, I re-launched iTunes and lo and behold the Store worked properly. This was NOT a problem with iTunes 8. Apparently everything with Safari needs to be kosher before the iTunes 9 Store will work.
Maybe you all have done this already, but it immediately solved the problem for me. Hope this helps someone.

External HD issue. Finder cannot complete the operation because some data..

Last night I had a drive throw the error "finder cannot complete the operation because some data in "<file>" could not be read or written. Error code-36". I thought it was a bad disk. Then tonight I plugged in a flash drive, formatted it on the machine and now I am getting the same error on that disk as well. Any thoughts???

Yes, you can have bad blocks or other physical damage on a usb drive, the same as a firewire, or eSATA. Just because you can reformat the drive, doesn't mean the drive is okay. You reformat, yet the problem recurs. That is a sign of a bad drive. If it were an OS issue then the reformat should fix it.
You might want to check the drives with a utility from Prosoft called DriveGenius It's the "Swiss Army Knife" of utilities, including the ability to repartition "on the fly" (A little scary for my tastes). But Prosoft is a trusted software manufacturer. Downloaded the trial (it has more bells & whistles than you can believe) But the trial will run all hardware tests without the repair feature, and give you a report.
Also, you can download and use Applejack for repair.
-mj

WinRM cannot complete the operation. Verify that the specified computer name is valid, that the computer is accessible over the network

The Exchange Management Shell fails to connect in Exchange 2013 environment, this is a DAG environment and previously it indicates another error message, which is in my another thread. We fixed that error by delete the retired proxy entry in the server registry,
after that the error is gone but changed to below one, anyway the EMS still fails to connect to all servers:
VERBOSE: Connecting to NSWVIP999WTMBX.air.abc.au.
New-PSSession : [NSWVIP999WTMBX.air.abc.au] Connecting to remote server NSWVIP999WTMBX.air.abc.au failed with the
following error message : WinRM cannot complete the operation. Verify that the specified computer name is valid, that
the computer is accessible over the network, and that a firewall exception for the WinRM service is enabled and allows
access from this computer. By default, the WinRM firewall exception for public profiles limits access to remote
computers within the same local subnet. For more information, see the about_Remote_Troubleshooting Help topic.
At line:1 char:1
+ New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
   gTransportException
    + FullyQualifiedErrorId : WinRMOperationTimeout,PSSessionOpenFailed
Failed to connect to an Exchange server in the current site.
Enter the server FQDN where you want to connect.:
Then it just show can't connect to all the exchange servers, from the wording it seems pointing to the Windows firewall settings for winRM, but when I look at the windows firewall found it's turned off. We use Sophos enterprise for the security, but all
other 3 exchange servers didn't have the same issue.

Hi Lynn,
Thanks for your analyst and reply, I run the command as you suggested and checked accordingly to Task Manager, but seems none of them indicates a firewall or anti-virus.
  TCP    0.0.0.0:80             0.0.0.0:0              LISTENING       4
TCP    0.0.0.0:808            0.0.0.0:0              LISTENING       2260
TCP    172.17.2.123:444       172.16.2.127:8050      ESTABLISHED     4
TCP    172.17.2.123:444       172.16.2.127:8069      ESTABLISHED     4
TCP    172.17.2.123:444       172.17.2.127:8053      ESTABLISHED     4
TCP    172.17.2.123:10952     172.16.2.68:80         ESTABLISHED     3296
TCP    172.17.2.123:11185     172.16.2.90:8080       SYN_SENT        468
TCP    172.17.2.123:11190     172.16.2.90:8080       SYN_SENT        15268
TCP    172.17.2.123:11330     172.16.2.90:8080       SYN_SENT        1296
TCP    [::]:80                [::]:0                 LISTENING
4
TCP    [::]:808               [::]:0                 LISTENING
2260
TCP    [::1]:6001             [::1]:8028             ESTABLISHED     4764
TCP    [::1]:6001             [::1]:8029             ESTABLISHED     4764
TCP    [::1]:6001             [::1]:8030             ESTABLISHED     4764
TCP    [::1]:6001             [::1]:8031             ESTABLISHED     4764
TCP    [::1]:6001             [::1]:8032             ESTABLISHED     4764
TCP    [::1]:6001             [::1]:8033             ESTABLISHED     4764
TCP    [::1]:6001             [::1]:8034             ESTABLISHED     4764
TCP    [::1]:6001             [::1]:8035             ESTABLISHED     4764
TCP    [::1]:6001             [::1]:8036             ESTABLISHED     4764
TCP    [::1]:6001             [::1]:8037             ESTABLISHED     4764
TCP    [::1]:6001             [::1]:8040             ESTABLISHED     4764
TCP    [::1]:6001             [::1]:8041             ESTABLISHED     4764
TCP    [::1]:6001             [::1]:8048             ESTABLISHED     4764
TCP    [::1]:6001             [::1]:8049             ESTABLISHED     4764
TCP    [::1]:6001             [::1]:8059             ESTABLISHED     4764
TCP    [::1]:6001             [::1]:8060             ESTABLISHED     4764
TCP    [::1]:8028             [::1]:6001             ESTABLISHED     9980
TCP    [::1]:8029             [::1]:6001             ESTABLISHED     9980
TCP    [::1]:8030             [::1]:6001             ESTABLISHED     9980
TCP    [::1]:8031             [::1]:6001             ESTABLISHED     9980
TCP    [::1]:8032             [::1]:6001             ESTABLISHED     9980
TCP    [::1]:8033             [::1]:6001             ESTABLISHED     9980
TCP    [::1]:8034             [::1]:6001             ESTABLISHED     9980
TCP    [::1]:8035             [::1]:6001             ESTABLISHED     9980
TCP    [::1]:8036             [::1]:6001             ESTABLISHED     9980
TCP    [::1]:8037             [::1]:6001             ESTABLISHED     9980
TCP    [::1]:8040             [::1]:6001             ESTABLISHED     9980
TCP    [::1]:8041             [::1]:6001             ESTABLISHED     9980
TCP    [::1]:8048             [::1]:6001             ESTABLISHED     9980
TCP    [::1]:8049             [::1]:6001             ESTABLISHED     9980
TCP    [::1]:8059             [::1]:6001             ESTABLISHED     9980
TCP    [::1]:8060             [::1]:6001             ESTABLISHED     9980
TCP    [fe80::9054:e8f5:f885:8105%20]:808 [fe80::9054:e8f5:f885:8105%20]:9901
ESTABLISHED     2260
TCP    [fe80::9054:e8f5:f885:8105%20]:9901 [fe80::9054:e8f5:f885:8105%20]:808
ESTABLISHED     4868
This is the full result, among them
4 -- System -- NT Kernel & System
468 -- There is no process associated with PID 468
1296 -- svchost.exe -- Host Process for Windows Service
2260 -- SMSvcHost.exe -- SMSvcHost.exe
3296 -- CcmExec.exe -- CCM Executive
4764 -- Microsoft.Exchange.RpcClientAccess.Service.exe -- Microsoft.Exchange.RpcClientAccess.Service.exe
4868 -- Microsoft.Exchange.ServiceHost.exe -- Microsoft.Exchange.ServiceHost.exe
9980 -- w3wp.exe -- IIS Worker Process
15268 -- ServerManager.exe -- Server Manager

Cannot complete dump using db1_dump185

Similar Messages

Maybe you are looking for