Cannot connect to Session broker server, but can to other servers in Cluster

Hi Everyone,
Hopefully this is the right place to post. Have searched quite a bit through the forums (not all 19000+ pages though), and can't seem to find a similiar issue.
I have also searched the internet and tried all solutions others with a similiar problem have.
This is my problem:
We have two servers running Server 2008 R2, set up as Remote Desktop Servers in a cluster setup.
The session broker is located on the second server (This is an active server which has sessions load balanced to it). There is also a DNS round robin setup
Problem: When sessions are allowed to be load balanced on Server2, then the users cannot connect to the cluster. The round robin seems to still send some sessions to the first server, and these seem to connect fine.
I suspected the issue was with the WMI Respository, and so started. I found a lot of errors, but have been unable to fix them.
I downlaoded the WMIDiag from Microsoft, and here is the report:
48866 15:56:44 (0) ** WMIDiag v2.1 started on 15 April 2015 at 15:48.
48867 15:56:44 (0) **
48868 15:56:44 (0) ** Copyright (c) Microsoft Corporation. All rights reserved - July 2007.
48869 15:56:44 (0) **
48870 15:56:44 (0) ** This script is not supported under any Microsoft standard support program or service.
48871 15:56:44 (0) ** The script is provided AS IS without warranty of any kind. Microsoft further disclaims all
48872 15:56:44 (0) ** implied warranties including, without limitation, any implied warranties of merchantability
48873 15:56:44 (0) ** or of fitness for a particular purpose. The entire risk arising out of the use or performance
48874 15:56:44 (0) ** of the scripts and documentation remains with you. In no event shall Microsoft, its authors,
48875 15:56:44 (0) ** or anyone else involved in the creation, production, or delivery of the script be liable for
48876 15:56:44 (0) ** any damages whatsoever (including, without limitation, damages for loss of business profits,
48877 15:56:44 (0) ** business interruption, loss of business information, or other pecuniary loss) arising out of
48878 15:56:44 (0) ** the use of or inability to use the script or documentation, even if Microsoft has been advised
48879 15:56:44 (0) ** of the possibility of such damages.
48880 15:56:44 (0) **
48881 15:56:44 (0) **
48882 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
48883 15:56:44 (0) ** ----------------------------------------------------- WMI REPORT: BEGIN ----------------------------------------------------------
48884 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
48885 15:56:44 (0) **
48886 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
48887 15:56:44 (0) ** Windows Server 2008 R2 - Service pack 1 - 64-bit (7601) - User 'MIBCO\CONN.LOMBARD' on computer 'SSCRDS02'.
48888 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
48889 15:56:44 (0) ** INFO: Environment: .................................................................................................. 1 ITEM(S)!
48890 15:56:44 (0) ** INFO: => 3 possible incorrect shutdown(s) detected on:
48891 15:56:44 (0) **          - Shutdown on 05 December 2014 22:55:28 (GMT-0).
48892 15:56:44 (0) **          - Shutdown on 12 December 2014 06:43:00 (GMT-0).
48893 15:56:44 (0) **          - Shutdown on 27 February 2015 05:19:26 (GMT-0).
48894 15:56:44 (0) **
48895 15:56:44 (0) ** System drive: ....................................................................................................... C: (Disk #0 Partition #1).
48896 15:56:44 (0) ** Drive type: ......................................................................................................... SCSI (DELL PERC H700 SCSI Disk Device).
48897 15:56:44 (0) ** There are no missing WMI system files: .............................................................................. OK.
48898 15:56:44 (0) ** There are no missing WMI repository files: .......................................................................... OK.
48899 15:56:44 (0) ** WMI repository state: ............................................................................................... CONSISTENT.
48900 15:56:44 (0) ** AFTER running WMIDiag:
48901 15:56:44 (0) ** The WMI repository has a size of: ................................................................................... 26 MB.
48902 15:56:44 (0) ** - Disk free space on 'C:': .......................................................................................... 297281 MB.
48903 15:56:44 (0) **   - INDEX.BTR,                     5513216 bytes,      2015/04/15 03:52:21 PM
48904 15:56:44 (0) **   - MAPPING1.MAP,                  76804 bytes,        2015/04/15 03:50:51 PM
48905 15:56:44 (0) **   - MAPPING2.MAP,                  76804 bytes,        2015/04/15 03:52:21 PM
48906 15:56:44 (0) **   - OBJECTS.DATA,                  22036480 bytes,     2015/04/15 03:52:21 PM
48907 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
48908 15:56:44 (0) ** INFO: Windows Firewall status: ...................................................................................... ENABLED.
48909 15:56:44 (0) ** Windows Firewall Profile: ........................................................................................... DOMAIN.
48910 15:56:44 (0) ** Inbound connections that do not match a rule BLOCKED: ............................................................... ENABLED.
48911 15:56:44 (0) ** => This will prevent any WMI remote connectivity to this computer except
48912 15:56:44 (0) **    if the following three inbound rules are ENABLED and non-BLOCKING:
48913 15:56:44 (0) **    - 'Windows Management Instrumentation (DCOM-In)'
48914 15:56:44 (0) **    - 'Windows Management Instrumentation (WMI-In)'
48915 15:56:44 (0) **    - 'Windows Management Instrumentation (ASync-In)'
48916 15:56:44 (0) **    Verify the reported status for each of these three inbound rules below.
48917 15:56:44 (0) **
48918 15:56:44 (0) ** Windows Firewall 'Windows Management Instrumentation (WMI)' GROUP rule: ............................................. ENABLED.
48919 15:56:44 (0) ** Windows Firewall 'Windows Management Instrumentation (WMI-Out)' rule: ............................................... ENABLED.
48920 15:56:44 (0) ** Windows Firewall 'Windows Management Instrumentation (WMI-In)' rule: ................................................ ENABLED.
48921 15:56:44 (0) ** Windows Firewall 'Windows Management Instrumentation (DCOM-In)' rule: ............................................... ENABLED.
48922 15:56:44 (0) ** Windows Firewall 'Windows Management Instrumentation (ASync-In)' rule: .............................................. ENABLED.
48923 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
48924 15:56:44 (0) ** DCOM Status: ........................................................................................................ OK.
48925 15:56:44 (0) ** WMI registry setup: ................................................................................................. OK.
48926 15:56:44 (0) ** INFO: WMI service has dependents: ................................................................................... 2 SERVICE(S)!
48927 15:56:44 (0) ** - Internet Connection Sharing (ICS) (SHAREDACCESS, StartMode='Disabled')
48928 15:56:44 (0) ** - SMS Agent Host (CCMEXEC, StartMode='Automatic')
48929 15:56:44 (0) ** => If the WMI service is stopped, the listed service(s) will have to be stopped as well.
48930 15:56:44 (0) **    Note: If the service is marked with (*), it means that the service/application uses WMI but
48931 15:56:44 (0) **          there is no hard dependency on WMI. However, if the WMI service is stopped,
48932 15:56:44 (0) **          this can prevent the service/application to work as expected.
48933 15:56:44 (0) **
48934 15:56:44 (0) ** RPCSS service: ...................................................................................................... OK (Already started).
48935 15:56:44 (0) ** WINMGMT service: .................................................................................................... OK (Already started).
48936 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
48937 15:56:44 (0) ** WMI service DCOM setup: ............................................................................................. OK.
48938 15:56:44 (0) ** WMI components DCOM registrations: .................................................................................. OK.
48939 15:56:44 (0) ** WMI ProgID registrations: ........................................................................................... OK.
48940 15:56:44 (0) ** WMI provider DCOM registrations: .................................................................................... OK.
48941 15:56:44 (0) ** WMI provider CIM registrations: ..................................................................................... OK.
48942 15:56:44 (0) ** WMI provider CLSIDs: ................................................................................................ OK.
48943 15:56:44 (0) ** WMI providers EXE/DLL availability: ................................................................................. OK.
48944 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
48945 15:56:44 (0) ** INFO: User Account Control (UAC): ................................................................................... ENABLED.
48946 15:56:44 (0) ** => WMI tasks requiring Administrative privileges on this computer MUST run in an elevated context.
48947 15:56:44 (0) **    i.e. You can start your scripts or WMIC commands from an elevated command
48948 15:56:44 (0) **         prompt by right clicking on the 'Command Prompt' icon in the Start Menu and
48949 15:56:44 (0) **         selecting 'Run as Administrator'.
48950 15:56:44 (0) **    i.e. You can also execute the WMI scripts or WMIC commands as a task
48951 15:56:44 (0) **         in the Task Scheduler within the right security context.
48952 15:56:44 (0) **
48953 15:56:44 (0) ** INFO: Local Account Filtering: ...................................................................................... ENABLED.
48954 15:56:44 (0) ** => WMI tasks remotely accessing WMI information on this computer and requiring Administrative
48955 15:56:44 (0) **    privileges MUST use a DOMAIN account part of the Local Administrators group of this computer
48956 15:56:44 (0) **    to ensure that administrative privileges are granted. If a Local User account is used for remote
48957 15:56:44 (0) **    accesses, it will be reduced to a plain user (filtered token), even if it is part of the Local Administrators group.
48958 15:56:44 (0) **
48959 15:56:44 (0) ** DCOM security for 'Microsoft WBEM UnSecured Apartment' (Launch & Activation Permissions): ........................... MODIFIED.
48960 15:56:44 (1) !! ERROR: Actual trustee 'NT AUTHORITY\SYSTEM' DOES NOT match corresponding expected trustee rights (Actual->Default)
48961 15:56:44 (0) **        - ACTUAL ACE:
48962 15:56:44 (0) **          ACEType:  &h0
48963 15:56:44 (0) **                    ACCESS_ALLOWED_ACE_TYPE
48964 15:56:44 (0) **          ACEFlags: &h4
48965 15:56:44 (0) **                    NO_PROPAGATE_INHERIT_ACE
48966 15:56:44 (0) **          ACEMask:  &hB
48967 15:56:44 (0) **                    DCOM_RIGHT_EXECUTE
48968 15:56:44 (0) **                    DCOM_RIGHT_LAUNCH_LOCAL
48969 15:56:44 (0) **                    DCOM_RIGHT_ACTIVATE_LOCAL
48970 15:56:44 (0) **        - EXPECTED ACE:
48971 15:56:44 (0) **          ACEType:  &h0
48972 15:56:44 (0) **                    ACCESS_ALLOWED_ACE_TYPE
48973 15:56:44 (0) **          ACEFlags: &h0
48974 15:56:44 (0) **          ACEMask:  &h1F
48975 15:56:44 (0) **                    DCOM_RIGHT_EXECUTE
48976 15:56:44 (0) **                    DCOM_RIGHT_LAUNCH_LOCAL
48977 15:56:44 (0) **                    DCOM_RIGHT_LAUNCH_REMOTE
48978 15:56:44 (0) **                    DCOM_RIGHT_ACTIVATE_LOCAL
48979 15:56:44 (0) **                    DCOM_RIGHT_ACTIVATE_REMOTE
48980 15:56:44 (0) **
48981 15:56:44 (0) ** => The actual ACE has the right(s) '&h14 DCOM_RIGHT_LAUNCH_REMOTE DCOM_RIGHT_ACTIVATE_REMOTE' removed!
48982 15:56:44 (0) **    This will cause some operations to fail!
48983 15:56:44 (0) **    It is possible to fix this issue by editing the security descriptor and adding the removed right.
48984 15:56:44 (0) **    For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
48985 15:56:44 (0) **
48986 15:56:44 (0) ** DCOM security for 'Microsoft WBEM UnSecured Apartment' (Launch & Activation Permissions): ........................... MODIFIED.
48987 15:56:44 (1) !! ERROR: Actual trustee 'NT AUTHORITY\INTERACTIVE' DOES NOT match corresponding expected trustee rights (Actual->Default)
48988 15:56:44 (0) **        - ACTUAL ACE:
48989 15:56:44 (0) **          ACEType:  &h0
48990 15:56:44 (0) **                    ACCESS_ALLOWED_ACE_TYPE
48991 15:56:44 (0) **          ACEFlags: &h4
48992 15:56:44 (0) **                    NO_PROPAGATE_INHERIT_ACE
48993 15:56:44 (0) **          ACEMask:  &hB
48994 15:56:44 (0) **                    DCOM_RIGHT_EXECUTE
48995 15:56:44 (0) **                    DCOM_RIGHT_LAUNCH_LOCAL
48996 15:56:44 (0) **                    DCOM_RIGHT_ACTIVATE_LOCAL
48997 15:56:44 (0) **        - EXPECTED ACE:
48998 15:56:44 (0) **          ACEType:  &h0
48999 15:56:44 (0) **                    ACCESS_ALLOWED_ACE_TYPE
49000 15:56:44 (0) **          ACEFlags: &h0
49001 15:56:44 (0) **          ACEMask:  &h1F
49002 15:56:44 (0) **                    DCOM_RIGHT_EXECUTE
49003 15:56:44 (0) **                    DCOM_RIGHT_LAUNCH_LOCAL
49004 15:56:44 (0) **                    DCOM_RIGHT_LAUNCH_REMOTE
49005 15:56:44 (0) **                    DCOM_RIGHT_ACTIVATE_LOCAL
49006 15:56:44 (0) **                    DCOM_RIGHT_ACTIVATE_REMOTE
49007 15:56:44 (0) **
49008 15:56:44 (0) ** => The actual ACE has the right(s) '&h14 DCOM_RIGHT_LAUNCH_REMOTE DCOM_RIGHT_ACTIVATE_REMOTE' removed!
49009 15:56:44 (0) **    This will cause some operations to fail!
49010 15:56:44 (0) **    It is possible to fix this issue by editing the security descriptor and adding the removed right.
49011 15:56:44 (0) **    For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
49012 15:56:44 (0) **
49013 15:56:44 (0) **
49014 15:56:44 (0) ** DCOM security warning(s) detected: .................................................................................. 0.
49015 15:56:44 (0) ** DCOM security error(s) detected: .................................................................................... 2.
49016 15:56:44 (0) ** WMI security warning(s) detected: ................................................................................... 0.
49017 15:56:44 (0) ** WMI security error(s) detected: ..................................................................................... 0.
49018 15:56:44 (0) **
49019 15:56:44 (1) !! ERROR: Overall DCOM security status: ................................................................................ ERROR!
49020 15:56:44 (0) ** Overall WMI security status: ........................................................................................ OK.
49021 15:56:44 (0) ** - Started at 'Root' --------------------------------------------------------------------------------------------------------------
49022 15:56:44 (0) ** INFO: WMI permanent SUBSCRIPTION(S): ................................................................................ 5.
49023 15:56:44 (0) ** - ROOT/SUBSCRIPTION, NTEventLogEventConsumer.Name="SCM Event Log Consumer".
49024 15:56:44 (0) **   'select * from MSFT_SCMEventLogEvent'
49025 15:56:44 (0) ** - ROOT/CCM/POLICY, CCM_PolicyReplicationConsumer.Id="{9099D177-1AD6-46e6-BBC0-70F460786953}".
49026 15:56:44 (0) **   'SELECT * FROM __NamespaceCreationEvent'
49027 15:56:44 (0) ** - ROOT/CCM/POLICY, CCM_PolicyReplicationConsumer.Id="{9099D177-1AD6-46e6-BBC0-70F460786953}".
49028 15:56:44 (0) **   'SELECT * FROM __ClassOperationEvent WHERE TargetClass ISA "CCM_Policy_EmbeddedObject"'
49029 15:56:44 (0) ** - ROOT/CCM/POLICY, CCM_PolicyReplicationConsumer.Id="{9099D177-1AD6-46e6-BBC0-70F460786953}".
49030 15:56:44 (0) **   'SELECT * FROM __ClassOperationEvent WHERE TargetClass ISA "CCM_Policy_Config"'
49031 15:56:44 (0) ** - ROOT/CCM/POLICY, CCM_PolicyReplicationConsumer.Id="{9099D177-1AD6-46e6-BBC0-70F460786953}".
49032 15:56:44 (0) **   'SELECT * FROM __ClassOperationEvent WHERE TargetClass ISA "CCM_Policy"'
49033 15:56:44 (0) **
49034 15:56:44 (0) ** WMI TIMER instruction(s): ........................................................................................... NONE.
49035 15:56:44 (0) ** INFO: WMI namespace(s) requiring PACKET PRIVACY: .................................................................... 3 NAMESPACE(S)!
49036 15:56:44 (0) ** - ROOT/CIMV2/SECURITY/MICROSOFTTPM.
49037 15:56:44 (0) ** - ROOT/CIMV2/TERMINALSERVICES.
49038 15:56:44 (0) ** - ROOT/SERVICEMODEL.
49039 15:56:44 (0) ** => When remotely connecting, the namespace(s) listed require(s) the WMI client to
49040 15:56:44 (0) **    use an encrypted connection by specifying the PACKET PRIVACY authentication level.
49041 15:56:44 (0) **    (RPC_C_AUTHN_LEVEL_PKT_PRIVACY or PktPrivacy flags)
49042 15:56:44 (0) **    i.e. 'WMIC.EXE /NODE:"SSCRDS02" /AUTHLEVEL:Pktprivacy /NAMESPACE:\\ROOT\SERVICEMODEL Class __SystemSecurity'
49043 15:56:44 (0) **
49044 15:56:44 (0) ** WMI MONIKER CONNECTIONS: ............................................................................................ OK.
49045 15:56:44 (0) ** WMI CONNECTIONS: .................................................................................................... OK.
49046 15:56:44 (1) !! ERROR: WMI GET operation errors reported: ........................................................................... 34 ERROR(S)!
49047 15:56:44 (0) ** - Root/CIMV2, MSFT_NetInvalidDriverDependency, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49048 15:56:44 (0) **   MOF Registration: ''
49049 15:56:44 (0) ** - Root/CIMV2, Win32_OsBaselineProvider, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49050 15:56:44 (0) **   MOF Registration: ''
49051 15:56:44 (0) ** - Root/CIMV2, Win32_OsBaseline, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49052 15:56:44 (0) **   MOF Registration: ''
49053 15:56:44 (0) ** - Root/CIMV2, Win32_DriverVXD, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49054 15:56:44 (0) **   MOF Registration: ''
49055 15:56:44 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_GenericIKEandAuthIP, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49056 15:56:44 (0) **   MOF Registration: ''
49057 15:56:44 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_GenericIKEandAuthIP, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49058 15:56:44 (0) **   MOF Registration: ''
49059 15:56:44 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_IPsecAuthIPv4, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49060 15:56:44 (0) **   MOF Registration: ''
49061 15:56:44 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_IPsecAuthIPv4, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49062 15:56:44 (0) **   MOF Registration: ''
49063 15:56:44 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_IPsecAuthIPv6, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49064 15:56:44 (0) **   MOF Registration: ''
49065 15:56:44 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_IPsecAuthIPv6, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49066 15:56:44 (0) **   MOF Registration: ''
49067 15:56:44 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_IPsecIKEv4, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49068 15:56:44 (0) **   MOF Registration: ''
49069 15:56:44 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_IPsecIKEv4, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49070 15:56:44 (0) **   MOF Registration: ''
49071 15:56:44 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_IPsecIKEv6, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49072 15:56:44 (0) **   MOF Registration: ''
49073 15:56:44 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_IPsecIKEv6, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49074 15:56:44 (0) **   MOF Registration: ''
49075 15:56:44 (0) ** - Root/CIMV2, Win32_PerfFormattedData_NETDataProviderforOracle_NETDataProviderforOracle, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49076 15:56:44 (0) **   MOF Registration: ''
49077 15:56:44 (0) ** - Root/CIMV2, Win32_PerfRawData_NETDataProviderforOracle_NETDataProviderforOracle, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49078 15:56:44 (0) **   MOF Registration: ''
49079 15:56:44 (0) ** - Root/CIMV2, Win32_PerfFormattedData_TermService_TerminalServices, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49080 15:56:44 (0) **   MOF Registration: ''
49081 15:56:44 (0) ** - Root/CIMV2, Win32_PerfRawData_TermService_TerminalServices, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49082 15:56:44 (0) **   MOF Registration: ''
49083 15:56:44 (0) ** - Root/WMI, ReserveDisjoinThread, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49084 15:56:44 (0) **   MOF Registration: ''
49085 15:56:44 (0) ** - Root/WMI, ReserveLateCount, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49086 15:56:44 (0) **   MOF Registration: ''
49087 15:56:44 (0) ** - Root/WMI, ReserveJoinThread, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49088 15:56:44 (0) **   MOF Registration: ''
49089 15:56:44 (0) ** - Root/WMI, ReserveDelete, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49090 15:56:44 (0) **   MOF Registration: ''
49091 15:56:44 (0) ** - Root/WMI, ReserveBandwidth, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49092 15:56:44 (0) **   MOF Registration: ''
49093 15:56:44 (0) ** - Root/WMI, ReserveCreate, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49094 15:56:44 (0) **   MOF Registration: ''
49095 15:56:44 (0) ** - Root/WMI, SystemConfig_PhyDisk, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49096 15:56:44 (0) **   MOF Registration: ''
49097 15:56:44 (0) ** - Root/WMI, SystemConfig_Video, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49098 15:56:44 (0) **   MOF Registration: ''
49099 15:56:44 (0) ** - Root/WMI, SystemConfig_IDEChannel, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49100 15:56:44 (0) **   MOF Registration: ''
49101 15:56:44 (0) ** - Root/WMI, SystemConfig_NIC, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49102 15:56:44 (0) **   MOF Registration: ''
49103 15:56:44 (0) ** - Root/WMI, SystemConfig_Network, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49104 15:56:44 (0) **   MOF Registration: ''
49105 15:56:44 (0) ** - Root/WMI, SystemConfig_CPU, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49106 15:56:44 (0) **   MOF Registration: ''
49107 15:56:44 (0) ** - Root/WMI, SystemConfig_LogDisk, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49108 15:56:44 (0) **   MOF Registration: ''
49109 15:56:44 (0) ** - Root/WMI, SystemConfig_Power, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49110 15:56:44 (0) **   MOF Registration: ''
49111 15:56:44 (0) ** - root/ccm/LocationServices, ClientInfo, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49112 15:56:44 (0) **   MOF Registration: ''
49113 15:56:44 (0) ** - root/ccm/LocationServices, ClientInfo, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
49114 15:56:44 (0) **   MOF Registration: ''
49115 15:56:44 (0) ** => When a WMI performance class is missing (i.e. 'Win32_PerfRawData_TermService_TerminalServices'), it is generally due to
49116 15:56:44 (0) **    a lack of buffer refresh of the WMI class provider exposing the WMI performance counters.
49117 15:56:44 (0) **    You can refresh the WMI class provider buffer with the following command:
49118 15:56:44 (0) **
49119 15:56:44 (0) **    i.e. 'WINMGMT.EXE /SYNCPERF'
49120 15:56:44 (0) **
49121 15:56:44 (0) ** WMI MOF representations: ............................................................................................ OK.
49122 15:56:44 (0) ** WMI QUALIFIER access operations: .................................................................................... OK.
49123 15:56:44 (0) ** WMI ENUMERATION operations: ......................................................................................... OK.
49124 15:56:44 (0) ** WMI EXECQUERY operations: ........................................................................................... OK.
49125 15:56:44 (2) !! WARNING: WMI GET VALUE operation errors reported: ................................................................... 5 WARNING(S)!
49126 15:56:44 (0) ** - Root, Instance: __EventConsumerProviderCacheControl=@, Property: ClearAfter='00000000000030.000000:000' (Expected default='00000000000500.000000:000').
49127 15:56:44 (0) ** - Root, Instance: __EventProviderCacheControl=@, Property: ClearAfter='00000000000030.000000:000' (Expected default='00000000000500.000000:000').
49128 15:56:44 (0) ** - Root, Instance: __EventSinkCacheControl=@, Property: ClearAfter='00000000000015.000000:000' (Expected default='00000000000230.000000:000').
49129 15:56:44 (0) ** - Root, Instance: __ObjectProviderCacheControl=@, Property: ClearAfter='00000000000030.000000:000' (Expected default='00000000000500.000000:000').
49130 15:56:44 (0) ** - Root, Instance: __PropertyProviderCacheControl=@, Property: ClearAfter='00000000000030.000000:000' (Expected default='00000000000500.000000:000').
49131 15:56:44 (0) **
49132 15:56:44 (0) ** WMI WRITE operations: ............................................................................................... NOT TESTED.
49133 15:56:44 (0) ** WMI PUT operations: ................................................................................................. NOT TESTED.
49134 15:56:44 (0) ** WMI DELETE operations: .............................................................................................. NOT TESTED.
49135 15:56:44 (0) ** WMI static instances retrieved: ..................................................................................... 6304.
49136 15:56:44 (0) ** WMI dynamic instances retrieved: .................................................................................... 0.
49137 15:56:44 (0) ** WMI instance request cancellations (to limit performance impact): ................................................... 3.
49138 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
49139 15:56:44 (0) ** # of Event Log events BEFORE WMIDiag execution since the last 20 day(s):
49140 15:56:44 (0) **   DCOM: ............................................................................................................. 0.
49141 15:56:44 (0) **   WINMGMT: .......................................................................................................... 0.
49142 15:56:44 (0) **   WMIADAPTER: ....................................................................................................... 0.
49143 15:56:44 (0) **
49144 15:56:44 (0) ** # of additional Event Log events AFTER WMIDiag execution:
49145 15:56:44 (0) **   DCOM: ............................................................................................................. 0.
49146 15:56:44 (0) **   WINMGMT: .......................................................................................................... 0.
49147 15:56:44 (0) **   WMIADAPTER: ....................................................................................................... 0.
49148 15:56:44 (0) **
49149 15:56:44 (0) ** 34 error(s) 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found
49150 15:56:44 (0) ** => This error is typically a WMI error. This WMI error is due to:
49151 15:56:44 (0) **    - a missing WMI class definition or object.
49152 15:56:44 (0) **      (See any GET, ENUMERATION, EXECQUERY and GET VALUE operation failures).
49153 15:56:44 (0) **      You can correct the missing class definitions by:
49154 15:56:44 (0) **      - Manually recompiling the MOF file(s) with the 'MOFCOMP <FileName.MOF>' command.
49155 15:56:44 (0) **      Note: You can build a list of classes in relation with their WMI provider and MOF file with WMIDiag.
49156 15:56:44 (0) **            (This list can be built on a similar and working WMI Windows installation)
49157 15:56:44 (0) **            The following command line must be used:
49158 15:56:44 (0) **            i.e. 'WMIDiag CorrelateClassAndProvider'
49159 15:56:44 (0) **      Note: When a WMI performance class is missing, you can manually resynchronize performance counters
49160 15:56:44 (0) **            with WMI by starting the ADAP process.
49161 15:56:44 (0) **    - a WMI repository corruption.
49162 15:56:44 (0) **      In such a case, you must rerun WMIDiag with 'WriteInRepository' parameter
49163 15:56:44 (0) **      to validate the WMI repository operations.
49164 15:56:44 (0) **    Note: ENSURE you are an administrator with FULL access to WMI EVERY namespaces of the computer before
49165 15:56:44 (0) **          executing the WriteInRepository command. To write temporary data from the Root namespace, use:
49166 15:56:44 (0) **          i.e. 'WMIDiag WriteInRepository=Root'
49167 15:56:44 (0) **    - If the WriteInRepository command fails, while being an Administrator with ALL accesses to ALL namespaces
49168 15:56:44 (0) **      the WMI repository must be reconstructed.
49169 15:56:44 (0) **    Note: The WMI repository reconstruction requires to locate all MOF files needed to rebuild the repository,
49170 15:56:44 (0) **          otherwise some applications may fail after the reconstruction.
49171 15:56:44 (0) **          This can be achieved with the following command:
49172 15:56:44 (0) **          i.e. 'WMIDiag ShowMOFErrors'
49173 15:56:44 (0) **    Note: The repository reconstruction must be a LAST RESORT solution and ONLY after executing
49174 15:56:44 (0) **          ALL fixes previously mentioned.
49175 15:56:44 (2) !! WARNING: Static information stored by external applications in the repository will be LOST! (i.e. SMS Inventory)
49176 15:56:44 (0) **
49177 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
49178 15:56:44 (0) ** Unexpected, wrong or missing registry key values: ................................................................... 1 KEY(S)!
49179 15:56:44 (0) ** INFO: Unexpected registry key value:
49180 15:56:44 (0) **   - Current:  HKLM\SOFTWARE\Microsoft\WBEM\CIMOM\Logging (REG_SZ) -> 0
49181 15:56:44 (0) **   - Expected: HKLM\SOFTWARE\Microsoft\WBEM\CIMOM\Logging (REG_SZ) -> 1
49182 15:56:44 (0) **     From the command line, the registry configuration can be corrected with the following command:
49183 15:56:44 (0) **     i.e. 'REG.EXE Add "HKLM\SOFTWARE\Microsoft\WBEM\CIMOM" /v "Logging" /t "REG_SZ" /d "1" /f'
49184 15:56:44 (0) **
49185 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
49186 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
49187 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
49188 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
49189 15:56:44 (0) **
49190 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
49191 15:56:44 (0) ** ------------------------------------------------------ WMI REPORT: END -----------------------------------------------------------
49192 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
49193 15:56:44 (0) **
49194 15:56:44 (0) ** ERROR: WMIDiag detected issues that could prevent WMI to work properly!.  Check 'C:\USERS\CONN.LOMBARD\APPDATA\LOCAL\TEMP\WMIDIAG-V2.1_2K8R2.SRV.SP1.64_SSCRDS02_2015.04.15_15.48.25.LOG' for details.
49195 15:56:44 (0) **
49196 15:56:44 (0) ** WMIDiag v2.1 ended on 15 April 2015 at 15:56 (W:110 E:41 S:1).
This seems to be the biggest problem:
48960 15:56:44 (1) !! ERROR: Actual trustee 'NT AUTHORITY\SYSTEM' DOES NOT match corresponding expected trustee rights (Actual->Default)
This seems to be the second biggest error (and there are a few of them):
0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
I have tried:
winmgmt /resyncperf
winmgmt /verifyrepository
winmgmt /salvagerepository
winmgmt /resetrepository
I have also tried registering the mof files with
MOFCOMP <FileName.mof>
Lastly, I even disabled the WMI service, renamed the Repository folder, and had it rebuild the repository.
I got stuck on re registering the 'NT AUTHORITY\SYSTEM' (I think it is in the Components section in Administrative tools), as I could not find clear instructions on exactly how to go about it.
Chkdsk found no errors
Sfc /scannow found no errors
winmgmt /verifyrepository finds no errors.
I'm hoping someone here might be able to steer me in the right direction to get this resolved, as I do not want to rebuild a server that hosts a connection broker and has over 100 user profiles on it, as well as some very annoying and finniky LOB apps installed,
which will have to manually be reinstalled for each profile.

Hi,
Here is a blog regarding how to fix WMI issue might be useful to you:
Fixing WMI issues Using Batch Script
http://social.technet.microsoft.com/wiki/contents/articles/6887.fixing-wmi-issues-using-batch-script.aspx
In addition, you mentioned Remote Desktop Servers are in a cluster setup, would you tell us how did you create the cluster?
As far as I know, with RD Connection Broker, we don’t need to create a cluster but just add multiple RD session hosts into one collection, then RD connection Broker would redirect sessions automatically.
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Similar Messages

  • I installed adobe digital editions but when I want to authorize a device (an e-reader) it doesn't work, I receive an error message that digital editions cannot connect with the activation server. what can I do?

    I installed adobe digital editions but when I want to authorize a device (an e-reader) it doesn't work, I receive an error message that digital editions cannot connect with the activation server. what can I do?

    Please quote the exact error message, word-for-word, verbatim.
    What is your operating system?
    What version of Lightroom?

  • Cannot connect to RemoteApp (VDI mode) but can connect to full VDI desktop

    Title says it all. I have a multiple server RDS farm. Gateway, license and broker are concentrated on one server. Several session hosts and they all work fine. They host full desktop sessions.
    The problem started when we started to move to VDI (pooled managed). At first during testing everything was working in fine. We had started publishing our apps and it was working in our lab. We then tested for scale and deployment and everything was fine.
    When we started to roll out, at some point during creating of the VDI vm's (we were testing with 5 and then deployed 50), it got interrupted and failed. We recreated all desktops and that finished OK.
    Problem is: no one can connect to an app.
    If I remove the published apps, everyone can get a VDI desktop, but as soon as I try to publish an app, then nothing. No errors generated... nothing. It looks like it is connecting but then nothing. The Remotepp window just silently closes.
    I have:
    1. Rebuilt then entire RD Host from bare metal
    2. Removed and re-added the gateway and connection broker services on the main server
    3. Rebuilt the template from scratch and republished
    I get the exact same behavior. Users can get full managed VDI desktops... cannot get RemoteApps.
    Unfortunately, I cannot destroy the entire RDS infrastructure and rebuild because it is a business critical part of our infrastructure.
    I have combed through the registries looking for orphaned entries, etc. and nothing. I saw a few blog posts related to the local DB for the connection broker and have not tried digging into that. I DO NOT have connection broker running in HA.

    Hi Jason,
    Thanks for your comment.
    First of all sorry for late response.
    There are many issue which can be caused by WMI to deny access to retrieve connection list. You can try few things which is quoted from below thread.
    1. Check if the "TS Web Access Computers" security group on the RDSH server has incorrect permissions in DCOM and/or WMI:
       For checking DCOM security settings:
       1. Start the Component Services MMC snapin
       2. Navigate to Component Services -> Computers -> My Computer
       3. Right-click on My Computer and select properties
       4. Go to the COM Security tab
       5. Under Access Permissions, click the Edit Limits button
       6. Ensure that TS Web Access Computers is in the list, with all of the permissions set to “allow”.
       7. Under Launch and Activation Permissions, click the Edit Limits button
       8. Ensure that TS Web Access Computers is in the list, with all of the permissions set to “allow”.
       For checking WMI security settings:
       1. Start the WMI Control MMC snapin
       2. Right-click the WMI Control node and select properties
       3. Go to the Security tab
       4. Navigate to Root->CIMV2->TerminalServices
       5. With TerminalServices selected, click the Security button
       6. Ensure that TS Web Access Computers is in the list with Execute Methods, Enable Account, and Remote Enable set to "allow"
    2.  Verify the RD Session Host server's firewall allows WMI calls.
    3. Verify that the RD Connection Broker hasn't lost its trust relationship with the domain.
    4. See if non-RDS related WMI calls can be successfully made to the RDSH server. This can help differentiate between a general WMI issue and an issue calling the RDS WMI provider.
    More information.
    RemoteApp Source not working from RDWeb
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/173d4546-e12f-47c1-ac66-8b4f69826892/remoteapp-source-not-working-from-rdweb?forum=winserverTS
    Hope it helps! 
    Thanks.
    Dharmesh Solanki

  • Cannot connect to the secure network but can to the guest network

    I have three computers in my home, all Apple. One is an iMac with 10.5 installed, another is a powerbook g4 17" with 10.5 installed and the third is an old titanium powerbook g4 15" with 10.4 installed. All of them have the newest versions of software.
    I just bought a new time capsule and that has the newest firmware upgrade installed. I set the time capsule up with a secure WPA Personal network and a guest network with no password. I can connect to the secure network on the iMac and the 17" powerbook but the titanium powerbook cannot even see the secure network or connect to it if I enter it and put in the correct password. However the titanium powerbook can see and connect to the guest network.
    Please help, I need to be able to print from the titanium powerbook to an ethernet printer connected to the time capsule.
    I've tried adding a wireless client with no password in airport utility thinking I could connect the titanium powerbook that way and that does not work either.

    Actually I have figured it out. I guess the titanium powerbooks cannot do WPA encryption, only WEP but I cannot choose WEP in the airport utility nor do I want to. I did find a work around though.
    In airport utility I went to the base station menu and clicked on "equivalent network password" and it shows the WPA password and then something called "WPA Pre-Shared Key". The key is a 64 character password but I tried it on the titanium powerbook and it worked!

  • Some users cannot "see" broadcast Public Access SSID but can all others...

    I've had 4 users in the last 3 days who've reported not being able to see our broadcast "public access" wifi SSID. Numerous users (even in same area, attached to same AP) can see it - however some cannot. The do see all of the other broadcast SSIDs, just not the public. The public is open and broadcast with security enabled. Does anyone know if this is a client issue - possible with a recent AV or MS security update? ("protecting" clients from unsecured networks by not displaying them?)

    If you notice that at a given time some users can and other can't see the ssid, it almost points to the client side. Compare drivers from the two clients and see if the driver versions are the same or old.

  • Fatal Error Adobe cannot connect to a DDE server.

    Just started getting this error message "Fatal Error Adobe cannot connect to a DDE server." Can save files to PDF but then cannot open them. Using current Adobe 11 with Windows 8, using Norton Security Suite. Sometimes it will say Fatal error Adobe and at other times it will say Acrobat.

    Hi snowbird1,
    Thank You for posting on the forums. The probable cause of the error is, multiple processes of Acrobat/Reader running in the background.
    Kindly follow the steps mentioned below and check, if it helps.
    1) Press CTRL+ALT+DEL together
    2) Go to the Task Manager
    3) Go to Processes in the Task Manager and kill al the processes related to Acrobat/Reader.
    4) Launch Reader/Acrobat (It should launch without an error).
    To further isolate the issue you might want to run Acrobat/Reader in an environment where no other services are running.
    This can be achieved via "MSCONFIG"
    1) Click on start type run
    2) Type MSCONFIG in the run prompt
    3) Go to services and click on hide all Microsoft services
    4) Click disable all
    5) Go to the startup in configuration window and disable all startup items
    6) Restart your system
    7) Launch Acrobat/Reader
    If, it is launched without an error, a service on your system is conflicting with Acrobat/Reader.
    Thanks,
    Vikrantt Singh

  • "RTMFP" connected to the FMS server,but may not play multicast video?

    the question is,a client which can use "rtmfp" to connect to a FMS server,and the connecting success,Whether Can not guarantee that the client can play the Multicast video?
    because the client may be behind a Special firewall ，So he may connect to the FMS server ,but can not  use P2P to connect to the  members those are in the  group?
    If the answer is "yes",Whether i should make a check function that make these client  back to "RTMP"?

    Hi,
    Thanks for your interest in RTMFP.
    The following resources would help in giving all the required and relevant information :
    http://www.adobe.com/devnet/flashmediaserver/articles/real-time-collaboration.html
    General RTMFP Documentation : http://help.adobe.com/en_US/flashmediaserver/devguide/WSa4cb07693d123884520b86f312a354ba36 d-7ffe.html
    Port Requirements : http://help.adobe.com/en_US/flashmediaserver/configadmin/WSdb9a8c2ed4c02d261d76cb3412a40a4 90be-8000.html
    Thank you !

  • Emails are "stuck" in my Apple Mail Outbox. I have deleted the account and reinstalled but still have the problem. Apple's "Network Diagnostics" report that it cannot connect to the SMPT server.

    Emails are l "stuck" in my Apple Mail Outbox. I have deleted the account and reinstalled but still have the problem. Apple's "Network Diagnostics" report that it cannot connect to the SMPT server. TalkTalk (Tiscali) say there is no problem with their server because I have checked and can send emails with their webmail.

    No that is not it:
    Open Mail>Preferences>Accounts, the first page has this on it
    If you click on the server name in the box (gmail in your case I assume) it opens and reveals this:
    If you select Edit SMTP Server list you get this:
    Post it here and, select the Advanced Tab (which looks like this)
    Post this page as well.

  • The conection on my ipod has 3 bars and i am able to connect safari and seach on google but when i try youtube it says "cannot connect to youtube" every time, how can i fix this?

    the conection on my ipod has 3 bars and i am able to connect safari and seach on google but when i try youtube it says "cannot connect to youtube" every time, how can i fix this?

    try to exit out of the youtube app with the multitasking feature. if this doesnt work then try to do a manual restart by holding down the home and power/sleep button all the way past the "slide to unlock" screen until the ipod will power off and the apple symbol will appear when the ipod tuens back on

  • Hi sorry but i have an important question?i have an iphone 4 and i want connect his to i tunes in a second pc because the pc i connect before is broke..how can i do?without lost my photo number or music?

    hi sorry but i have an important question?i have an iphone 4 and i want connect his to i tunes in a second pc because the pc i connect before is broke..how can i do?without lost my photo number or music?

    check out this post by Zevoneer.

  • I have a update waiting and the box that says software update trys to connect to the update server but it can't do you have any help for me cause its saying i need this update real bad

    firefox says i have a update waiting but i try to install it and the software update box pops up and says (connecting to the update server) but thats as far as it goes can you please help me solve this issure

    Remove the files in the updates and updates\0 folder.<br />
    You may need to delete active-update.xml and updates.xml as well if present.
    XP:
    C:\Documents and Settings\&lt;user&gt;\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox\updates
    (%USERPROFILE%\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox)
    * http://kb.mozillazine.org/Software_Update (Software Update not working properly)
    If you have problems with updating then best is to download the full version and uninstall the currently installed version.
    You may need to remove the Firefox program folder to do a clean install of the new version.
    Do a clean (re-)install:
    Download a fresh Firefox copy and save the file to the desktop.
    * Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
    * Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
    * Uninstall your current Firefox version.
    * Do not remove personal data when you uninstall the current version.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    * It may not be necessary to create a new profile, so first try if it works with your current profile and if not then create a new profile.
    You do not need to create a new profile, that is not necessary for this issue
    Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

  • Cannot connect to service: sess_iiop://server:2481:orcl

    Hello everybody,
    I am trying to run Sample code HelloWorld to deploy session beans but getting this error Cannot connect to service: sess_iiop://server:2481:orcl.
    Even sess_sh command giving the same error,how to configure iiop on client side.
    I am doing everything acorrding to http://technet.oracle.com/sample_code/tech/java/ejb_corba/files/orderentry/EJBDirections.PDF
    Using JDeveloper is also giving the same error UNKNOWN_SERVICE
    Pls Can Any from u help me to solve this problem any version 815,816,817,9i,9ias.
    Mangesh

    for usability, performance reasons, as of 9i DB R2 we are discontinuing J2EE and CORBA stack support from within the database
    EJBs should be deployed rather in iAS/OC4J - I won't get cycles from dev team to debug EJB in Database - unless it is a high priority/production system then customer should file a bug
    Kuassi
    Hi folks,
    we have the same problem! We can connect with sess_sh to the Oracle9i system but we get the exception
    javax.naming.CommunicationException: Unbekannter Dienst: 192.168.2.150:2481:rdrsl
    while looking for the EJB from a java client.
    We really need help!
    Thx.

  • Acrobat cannot connect to the Review Server

    I've been invited to a shared review on Acrobat.com. When I download and open the PDF from the Acrobat.com invitation email, I get this error message:
    Acrobat cannot connect to the Review Server: Adobe online services.
    If I click the "Check for new comments" button in the upper right corner, I get this message:
    Could not get new comments. Acrobat did not get a response from the server. Try again later or contact your system administrator.
    I can't see other reviewers' comments and can't post my own. I'm definitely online and connected, so not sure what's happening, but have had this error for several weeks now.
    My system: 
    Acrobat XI Pro
    MacBook Pro OS X 10.8.5
    Safari browser 6.0.5
    My Creative Cloud desktop app says Acrobat XI is up to date. I also have Photoshop CC installed.
    I've tried logging into Acrobat.com with my Adobe ID before and after opening the PDF, nothing works. Also tried clearing my cache. Is there something in my Acrobat preferences that could be the issue? 
    Please help.
    Thanks,
    Mark

    I am having a similar problem. The review was set up as a test. All our PC colleagues can access as normal. Our 2 Mac machines are not having luck.
    Acrobat 10.1.8 Pro
    Macbookpro OSX 10.8.5
    Error: Could not get new comments. Acrobat did not get a response from the server. Try again later or contact your system administrator.
    Could not get new comments. Acrobat did not get a response from the server. Try again later or contact your system administrator.
    I'm guessing maybe a proxy issue?... what protocol/port is acrobat tryng to use?
    (I tried process above with no luck)

  • ICloud says it cannot connect me to the server

    I have lost the phone numbers in my contacts on my iphone 4S. I figured that using iCloud from my PC I would be able to recover them. When I try to sign in to iCloud from my PC, I get a message saying that it cannot connect me to the server. I can tell that my iCloud password on my phone is not correct but when I correct it, it reverts back to the old one. I can't figure out how to save it,and its the only thing I can see that might be preventing me access. I downloaded the latest version of iOS to see if that would help and it didn't. Any ideas?

    I'm getting the same thing. I JUST bought mine too...
    I was immediately sold once I played with it at the Apple Store but they forget to warn you there's a lot of setting up.
    I'm tempted to go to an Apple store and tell them, I just wanna walk into my local coffee shop and be able to use their free wifi... what are the steps I need to take?
    With my laptop all I have to do is turn on the airport and then I'm on the internet... with the iPod Touch seems like you have to go through **** and back - I started doing research on troubleshooting with iPod Touch, even called a person at the Apple store and then I see all these posts of routers, IP addresses, DCHP, reset settings and it's REALLY REALLY confusing for someone who's not that computer savvy - I thought Apple was user friendly. I really hope it's not that hard.
    If you find results, please let me know. I've gone cross eyed from reading too much about this somewhat simple yet extremely complicated device.

  • BPC 75M - Modify Application error "Cannot connect to the Reporting Server"

    I have trouble with Modify Application, also in ApShell. Maybe you have a clue what it can be the problem.
    Configuration: single server BPC 7.5M SP3, Windows Server 2008 SP2, SQL Server 2008 SP2
    Installation user is a domain user.
    No errors during installation, no error in Server Manager diagnostics.
    But when I try to modify an Application from BPC Admin it gives an error for step "Make OLAP database and Journal/Audit reports. / Validate dimension formulas.".
    In tblLogs I see the error message:
    ==============[System Error Tracing]============== [System Name] :
    AdminServerHandler [Message Type] : ErrorMessage [Job Name] :  
    AdminApplicationHandler : ExecuteModIfyApplication [DateTime] :
    10/19/2010 1:19:13 PM [UserId] : MYDOMAIN\MYUSER
    [Exception] DetailMsg : {System.Exception: Cannot connect to the Reporting Server at
    OSoft.Services.Application.AdminMainServer.AdminApplicationHandler.SetChangeDimensionForAudit(String strAppset, String strApp, String  strUserID, Boolean blnIsChangedDimension, String& strErrMsg) at
    OSoft.Services.Application.AdminMainServer.AdminApplicationHandler.ExecuteModIfyApplication(String strAppSet, String strApplicationName, String strApplicationDescription, String strSourceApplicationType, String 
    strNewApplicationType, String strRateApplicationName, String
    strOwnerShipApplicationName, String strCurrencyConversionsCalculation, 
    String strCalculation, String strIntercompanyBookings, String  
    strUSEliminations, String strOpeningBalance, String strValidations,
    String strIntercompanyEliminations, DataTable dtDimensionList, Boolean 
    bReassignSQLIndex, Boolean bProcessApplication, Boolean bDeleteFact,
    String strChangeAppType, String strUserID, String strReportBackID)}
    ==============[System Error Tracing End ]==============
    Edited by: Alexandru Berindei on Oct 26, 2010 7:57 PM
    Edited by: Alexandru Berindei on Oct 26, 2010 7:58 PM

    There were problems accessing the web page   HTTP://server/reports
    Error message:   "Reporting services 2008 user does not have required permissions"
    It was possible to open the page  HTTP://server/reports with local administrator user and  I fixed this problem by performin following:
    - add Content Manager right to bpc installation user
    - disable UAC from Windows Control Panel  > User Accounts
    Still Modify Application gives the same "Cannot connect to Reporting Services".
    I tried:
    - check that BPC Installation User is part of Local Administrators
    - reboot server
    - reinstall BPC after disabling UAC
    - reinstall everything except the Windows Server 2008
    - I installed another computer with the same exact configuration but with a local BPC Installation User and it works.
    Have anyone installed BPC 7.5M SP3 on single Windows Server 2008 SP2 , with SQL Server 2008 SP2 and with BPC Installation user a domain user?
    Maybe you have an idea of what I should check next.
    Thank you,
    Alex

Maybe you are looking for