Cannot create Volume License Installer

I am trying to create a volume license installer for LabVIEW 9, and I get the following error:
Error Copying File or Folder
Cannot copy mib: Access is denied
Make sure the disk is not full or write-protected
and that the file is not currently in use.
Is the file of the DVD somehow in use?
-Nils
Solved!
Go to Solution.

I am not sure what your specific issue is but I simply wanted to say that I had no issues creating installers LV 2009 for our VLA. Have you checked that destination drive that you are putting the installer on to ensure that it does have enough space and that you do have permissions to write to it?
Mark Yedinak
"Does anyone know where the love of God goes when the waves turn the minutes to hours?"
Wreck of the Edmund Fitzgerald - Gordon Lightfoot

Similar Messages

How to specify license triad for volume license installer

I'm trying to create a volume license installer and specify a license server triad for server settings. However it gives me an error if I enter 3 servers. It only allows me to enter one server name. How do I specify a triad? For example: licsrv1:27050,licsrv2:27050,licsrv3:27050

ecaille,
First, I jsut wanted to mention that if you want help with VLM in the future, it is best to post in the VLM specific forum located here.
To solve this issue you have to use a workaround because the Volume License Installer creation process does not support more than one server, and unfortunately the XML files that are used for the installers also won't accept more than one server.
To fix this you can create 3 separate Volume License Installers, one for each server. You can then create a batch file that runs the first complete VLI (just running setup.exe so the software installs also), and then runs the vlmclient.exe from the second two VLIs. The vlmclient.exe is the file that adds the servers to the computer. Therefore by running the first VLI you install the software and the first server, and then you append the second and third server names to the registry key for the server by running the second two vlmclient.exe files. Note that you need to keep the Client folders (that contains vlmclient.exe) separate because you need to run each separately as the XML files have different configurations to add each new server.
The shortcut for this is to simply copy the Client folder from the first VLI you create, and edit the <server></server> tags in the vlmclient.xml file in the two copies you make to contain the other two servers.
John B.
Applications Engineer
National Instruments

Need Acrobat Pro 9 Volume License installer

I just finished a very frustrating chat session with the Adobe support people who notified me that they could not help me in any way when it came to aquiring the Acrobat Pro 9 installer from the Volume Licensing Center. I have a valid serial and need the installer. How does one go about getting this to happen?
Thanks.

Thanks again Jeff. Here's the thing:
When I contact an agent they tell me they can't help me because they don't have access to the software and tell me to try the forums. Now, the forum is telling me to try an agent. You can see how this isn't going to solve the issue.
Is this solution possible? I'm happy to have my key verified.
http://forums.adobe.com/message/4768047

Cannot Create Directory During Installation

I've been going through the various fixes posted by the top users (a very helpful and intelligent bunch) but I haven't seen a fix for my particular issue. After downloading iTunes v7.6, during the installation process I receive a message:
Cannot create the directory C:\WINDOWS\Installer\{80FD852F-5AAC-4129-B931-06AAFFA43138}. A file with this name already exists. Please rename or remove the file and click retry, or click cancel to exit.
I have searched my system and there is no other file with that name on my hard drives anywhere. Does anyone have an idea why this is happening and what can be done to resolve this issue?

I found the answer myself. I entered into safe mode with the c: prompt. I was then able to locate and delete the file in C:\WINDOWS\Installer. I then went and deleted the files via add/delete program files. Per previous recommendations, I also deleted all iTunes and Quicktime folders/files in C:\Program Files and C:\WINDOWS\system32. Then I emptied the recycled bin, rebooted the computer and reloaded iTunes/Quicktime off the Apple iTunes web site. I hope this information helps someone else.

InDesign CS4 Volume Licensing Installer Download Link

Hello Folks,
I'm trying to find the link to download my old InDesign 6.0 (CS4) as I lost the original CD, but there is no Link available on the volume licensing site.
Does anybody know where I could find this?
Thanks!

@Peter Spier: Thanks, the Installer from that link you suggested worked. I thought I had tried that one previously for InDesign but it was for another adobe product (sorry for the confusion).
I spoke to Adobe representative(s) before I posted on the forum, one suggested going to Other downloads and download the Installer and when I tried it my serial # didn't work, I called them back and another one said I should find the right Installer on my Volume Licensing site, and of course there was no link to download InDesign CS4...
Anyway, it worked and that's what matters, I really appreciate your help.

Cannot create volumes with "dashes" in them anymore?

With NetWare 6.5.8 (NCS 1.8 I think) we could create a CLUSTERED Volume object with a "dash" in the name
Example:
CR1-HOME1
But it seems in iManager/NSSMU with OES2 Linux, that you can no longer use dashes?
Why?

Kevin,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

3.1.3 update cannot see existing licensed installation 3.1.1

Following upgrade to Lion I have seen a number of issues....
Downloaded 3.1.3 patch to apply to 3.1.1 currently installed as it will address the issues.
3.1.3 installer claims it cannot see the 3.0 installation.
This was originally a Aperture 2.0 install for which I purchased the 3.0 upgrade.
How do I go about getting the

Restored the 3.1.2 firmware again and Internet is reachable again.

Mountain Lion fails to install saying it cannot create the recovery; I had a similar problem with Lion and the Apple Store that helped me resolve it gave me an installable version of Mountain Lion on a flash drive for my inconvenience....

Mountain Lion fails to install saying it cannot create the recovery; I had a similar problem with Lion and the Apple Store that helped me resolve it gave me an installable version of Mountain Lion on a flash drive for my inconvenience....is there some trick I am missing or do I need to make an appointment with a genius...

I have the MacIntosh volume and the Boot Camp partition only. I know that when I installed Lion, I had to go through a whole back-up and recovery of Windows and then re-format the drive.
The tech at the Apple Store had a previous life as a MSCE and was very helpful. I believe he even said that I should not have htis problem with Mountain Lion which is why they gave me the flash with it onboard. I was in the process of starting a new job when I went to Lion, so I have waited to do this next and probably last upgrade to this old MBP since I doubt Apple will support this MBP in Maverick.
I do not have another installation, so that is not an option. I will try to create an external, I have plenty of hard drives around and see if I can get it done that way. It might take me a week or two to get back to it, but I will comment back upon completion of that effort. Thanks for your help....Dave Iverson

Can I create a 2012 home license with a 2013 volume license server?

I am having trouble getting a new installation of LV2012 SP1 to see the home license. I have to change computers at home so I am trying to move my install from one computer to the other. While I have given my IT person the new computer name and ID and they have generated the necessary file, Labview does not see the LV2012 SP1 installation I have. It is still in "evaluation mode". While my IT has upgraded the volume license server to 2013, all of my teams have not yet moved to 2013. So can I (or my IT) create a 2012 SP1 home license with a 2013 volume license server? Or is the problem with my new computer?

The license should be good for any version older than the current SSP is under. So somebody with a license for LabVIEW 2013 can activate LabVIEW 2012 as well. It is sounding like something is wrong with your new setup.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

I cannot create a catalog because everywhere I try on my computer, it comes up with cannot Lightroom cannot create a catalog on network volumes. And is there any way to contact Adobe directly? Would you be able to give me a phone number and/or email add

I cannot create a catalog because everywhere I try on my computer, it comes up with cannot Lightroom cannot create a catalog on network volumes. And is there any way to contact Adobe directly? Would you be able to give me a phone number and/or email address?@@

The short and direct answer to your question about catalogs on a network drive is that you can't do that. The catalog must reside on a local drive.
Here is a link to a list of telephone numbers. Choose one that is appropriate:
Adobe Connect Support phone numbers

Windows 8 pro is volume licensed and i cannot update to window 8.1

A month back, i bought a laptop from lenevo which has a window 8 pro (volume licensed) version. Now i am not able to update to windows 8.1 through the windows store. I use this laptop for my home use and i dont know how to update the OS now. Pls suggest
on what can be done.I cannot go back to Lenevo store because i have moved out of that state(area).

Hi,
Windows 8 Pro, if installed by an organization or a program that uses Volume Licensing, talk to your system admin, or the administrator of the program that was used to install Windows 8:
http://windows.microsoft.com/EN-US/windows-8/why-can-t-find-update-store
Regards
v-yamliu

Windows 8 Pro volume license version does not have "Add Features" therefore cannot install media center.

As the title describes, Windows 8 Pro installed from the Volume License ISO does not have the Add Features wizard, and as such it appears to be impossible to install the Windows Media Pack.
I've consulted with Live Chat support who cannot provide an answer to this, they simply said it should be done through "Add Features" which does not exist.
A similar thread was answered by saying install from a Retail disc and upgrade. However this is hardly a solution, paying for an additional Windows license when you already have a volume license.
Can anyone, preferably MSFT, provide a proper answer on how Windows Media Center can be install on Windows 8 Pro which is volume licensed. If it can't be done can some reason or justification be given as to why it can't be done.
Please see previous thread here: http://social.technet.microsoft.com/Forums/en-US/w8itproinstall/thread/d63b46e5-c542-4dbe-be41-c46cda440723

I would like to pile on here and say "ditto" to all of the above. you have a licensed product and they don't even support the MSFT version of a DVD player. Nah, no one EVER has to play a older technology in corporate America due to training or presentation
(A funny clip of a movie before a ppt)? Nah.
But, I'd like to add a warning to MSFT senior management. I know you want to force everyone to use YOUR cloud just like apple did to theirs. Wont' work. Some of us refuse to sign onto a web site and let you track all of our moves... some
distrust the cloud (Target anyone?) etc etc. All good points, now for the out of the park. The Harvard Business Review some years ago did a study on long term profitability of a company (you have to have a profit to stay in business). The
most highly correlated factor: Customer Sat. Sorry, but I don't see customer sat in all of these entries.
IF you made your product easier to use and NOT have to have a IT support person to move from a small workgroup to a server configuration (and PS, what in the heck to you get from a workgroup? File Replication, Remote access to outlook files as one
does via exchange? Really, every computer is in a workgoup any more, so there is ZERO value add in a workgroup on a MSFDT platform, however there is great value, even with a couple of users, in an Exchange/Windows Server Platform -- so why so you make
it so damned hard to implement one... Difficult for one to implement in an SMB environment (so lets just kill SBS) but growth from small business is where your growth is... just like IBM did before you, MSFT only appears to be listening to Fortune 500 it execs,
but I really digressed) This is just one more pain in the butt to use MSFT in the small environment. So what is the rational business decision? Yes one can pick MSFT but with Zero value add in the workgroup, why not them other guys (who may
be apple, or android or even some Linux platforms)
SO you want to continue to mil the cash cow, listen to your forums.
One more note on the STORE. Lets say you do pick a competitive product in the windows store. Have them been verified they don't contain malware like MSFT products? I believe the answer here is "NO" So this adds another layer of complexity
and security risk on the corporate problem of "How do I play a DVD on my laptop" I am sure none of you has ever played a movie on your laptop flying for business?
So, MSFT management, let me paraphrase the posts above: "WHY don't you support our business needs"
And remember, people buy to have their needs met..... (IBM Planned Sales Call)
If you don't meet small business needs, someone will... and that too is fraught with risk.
(For example of how to make computers easy to use in SMB I reference SBS, the Systems Management Interface tool in IBM Unix, or best of all, the AS/400.... something even Ellison couldn't kill, though he tried.

Silent installation + activation for CS6 design and web premium - volume license

Hi All,
I am having CS6 design and web premium - volume license and i am facing with a difficulty that we have to choose options for installation, also all of our computers are working behind proxy, therefore there is no direct internet which is causing problem with activation. Can you any suggest me away to implement silent install and activation without internet for bulk PCs ( about 500).
Thanks,

Can you login as the Hidden admin account and then run the installation,
http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-wi ndows-vista/

Package created with Creative Cloud Packager and volume licensing key- sign in required

Hello, we have used Creative Cloud Packager and volume licensing key to create Adobe Photoshop CC v.6 and other apps packages, tested before deployment. Deployed the image on iMAC computers, users are getting Sign in Required/ registration details message. Tried to use AAMEE to create serialization file, but it does not recogise packages created by Creative Cloud Packager. appreciate any advice. thank you.
Svetlana

HI Abhijit,
All our students have network home folders, the issue is that some students can open Photoshop and it will be activated, other students will be prompted to activate PHotoshop when they try to open it. We have tried to delete photoshop plist and adobe photoshop settings folder from students Library/ Preferences folder but it did not help.
We'll test the APTEE utility tomorrow, I will post the results. Thank you.
Svetlana

After Installation Thunderbird cannot create any e-mailaccount in Windows 8.1

Dear friends,
I have installed Thunderbird on my recently installed Win 8.1 system. TB installes, opens, but then I cannot create anything else but a Newsgroupaccount. The wizard for creating a new, or importing existing e-mailaccounts does not appear at all. The column for Accounts, the list with the Messages shows up, but remains completely blanc not showing anything at all but a Grey field. I've tried copying my Profile folder from my 'old' Linux machine, and the addressbook has been copied allright. But I cannot write any message, as no single e-mailaccount has been created, cannot be created, no matter how i approach this menu.
I have de-installed and removed everything, also in registry, and installed again. No changes. Same problem.
is it possible that my Win 8.1 sytem might be the culprit?
Sincerely, Rudi

Perhaps I should add a screendump of what my Thunderbird 31.2.0 look like. . .

Cannot create Volume License Installer

Similar Messages

Maybe you are looking for