HP Officejet Pro 8610 Catridge Problem

Bought a new HP Officejet Pro 8610 Printer. Setup Catridge shows continously "Catridge Problem" and later printed a test page and 2 other sheets while we were asleep. I decided, as a result of this accidental and unexpected printout, to buy a new catridhge set. New complete catridges were sent to me from the manufacturer itself, HP. I have correctly installed the catridges, and have repeated same step as instructed several times over. But annoyingly, this "Catridge Problem" will not go away. What should I do next. I had previously returned it to Currys and they said because I needed new set of ink hence the problem. Should I return it again or is their solution other than the one in their instruction book which is repeatedly failing....

Hi @Rose-Joe
I am sorry to hear about the troubles you are having with your Officejet 8610. The following document address cartridge errors, although the specific error you are seeing may not be mentioned, the document will guide you through the necessary steps to troubleshoot the issue; A 'Cartridge Missing' or 'Incompatible Ink Cartridges' Error Message.
If the issue persists, I recommend calling HP and letting the know the issue as well as the steps you have already completed. It may be helpful to even let them know you completed all of the steps in HP document #c04090902.
If you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide.
HP printers generally have a 1 year warranty from their purchase date, you can verify the warranty using the following link if you would like; warranty check.
HP will, at HP's option, either replace products under warranty that prove to be defective or refund the purchase price.
To find the “Warranty Ends” date on your cartridges, look in the following table for the date's location on each product. The date follows the YYYY/MM/DD or YYYY/MM format, where YYYY indicates the year, MM indicates the month, and DD indicates the day.
I hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Similar Messages

HP OfficeJet Pro 8610 Cartridge problem

I just buy new cartridges for HP OfficeJet Pro 8610. Model of cartridges is 950XL and 951XL C,M,Y. It's all brend new and original cartridges. The problem is that when i install cartridges in printer the massage appear: " Older generation cartridge installed ". I spend a lot off money to buy this cartridges and it's very disappointing that i dont have my printer for work. Please HP, find a way to fix this issue that you made and sand me a working solution.

Hi,
What Warranty end date is listed on the cartridge? is it still listed as warranties or not?
Also have a look on the error message on the printer, which cartridge it refers to? it should list a colored mark with the specific cartridge identification (C/Y/M/K)
If the Warranry end date has passed, that means the cartridge will not be accepted by the printer and should be replaced to a current one... if that is the case I would suggest conacting the retailer and replace the ink cartridge.
You may check the following document which deals with this error:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c04213916&lc=en&product=5367608&tmp...
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

OS x 10.10.4 HP Officejet Pro 8610 Install Problems

I have Mac OS X 10.10.4 Yosemite and I'm trying to install an HP Officejet Pro 8610. I've downloaded the software but it gets hung up trying to install the printer and when I try to install it manually it says device not found. Is there any issue with the fact that I have OS X10.10.4? I've spent hours trying to set up this new printer and researching what to do and I can't find any answers. Help!

Hi @Tristanndres,
Welcome to the HP Forums!
I see that you cannot print in color from Mac OS X 10.6 to your HP Officejet pro 8610. I am sorry to hear this, but happy to help!
Please try the following:
Reset the printing system. Mac OS X: How to reset the printing system.
Verify and repair disk permissions. Disk Utility 12.x: Repair disk permissions.
Then please see this print quality guide, Fixing Print Quality Problems for the HP Officejet Pro 8610, 8620, 8630, 8640, and 8660 e-All-in-One....
hope this solves your problem, and have a great day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

HP Officejet Pro 8610 setup issues Is there a problem using a MIFI?

I just bought this HP Officejet Pro. After trying all day yesterday with your support team, it was suggested I take it back to the store. I did and have purchase another HP Officejet Pro 8610 and am having the same problems. The on button goes to sleep but I cannot push for it to wake, I must unplug it. In addition, I cannot get it to recognize the computer to scan unless I have it connected to the commputer so it can't be wireless.

I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post serial numbers and case details.
If you are unfamiliar with how the Forum's private message capability works, this post has instructions.
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

HP Officejet Pro 8610 Add Printer issue on Mac

I purchased the HP Officejet Pro 8610 and cannot get it successfully set up on my MacBook Pro (operating OS X 10.7.5). During the "Add Printer" phase, I receive the following error message: "The software for this printer is currently unavailable. Please contact the printer's manufacturer for the latest software".
I've downloaded and completed the steps up to this point by using the link from install CD (HP-Officejet-Pro-8610_v12.32.0.dmg) and by downloading after unsuccessfully troubleshooting from the HP webite (HP-Officejet-Pro_8610_12.32.0-2.dmg).
Can you please assist in determing what my next step should be?

Hi,
First reboot your Mac, then click the Apple icon and select Software Update.
From the listed app store click the Store menu and then on Repload Page.
Be sure to install any listed HP or Apple update.
Once you are done, open Print & Scan and try adding the printer again.
May you see any difference?
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

How to connect HP Officejet Pro 8610 to a Laptop that's not connect to the internet

Just bought the HP Officejet Pro 8610 all-in-one for the local Historical Society. Neither the laptop nor the printer will be connected to the Internet. The printer will only be used for printing reports, scanning images, etc.
I have just removed the instruction manual to familiarize myself with the connecting procedure but I notice there are several references that require internet access.
Is there a work-around that allows me to install/connect the printer without requiring access to the internet?
Thank you in advance for your help.
This question was solved.
View Solution.

Hi,
How many computer will be using the printer ? If only one the USB (you may have to buy a cable) is the way to go. You can also use wireless direct to print but this is not reliable:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c00577405
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HP Officejet Pro 8610 (Network)' is offline every morning

I am running Windows 8. I use IE 11 and Chrome on occasion. Every morning I have trouble "waking up" my printer. I get "HP Officejet Pro 8610 (Network)' is offline". Sometimes turning the printer on and off resets it but today nothing seems to work. I even updated drivers. The rest of my network (excluding printer usage) is working fine. I have not been on a public network so that is not an issue nor has anyone else in our household. I need to correct this every morning problem. Really, any time the printer goes to sleep I have this issue. I'm unsure if I can stop it from going to sleep or not since I can't even see it from any of our computers. Someone please help. I've been dealing with this about a month. I had previously purchased an Epson printer similar and it now sits in a box in my office because of similiar annoying issues. I previously had HP all-in-ones for about 15 years with no problems. This one is starting to make me wonder about the declining quality of HP printers. Please help as soon as possible. My son has a paper due Tuesday and can't print it. Thanks

Hello , Welcome to the HP Forums! I understand your Officejet 8610 is offline every morning and it seems like this printer has trouble waking up. I will do my best to assist you! Please follow this entire HP document on What is Sleep Mode? You can try updating the firmware, which should help, since your printer is losing wireless connection when it goes to sleep: 1) Press the right arrow on your printer2) Press Setup (Wrench)3) Press Web Services4) Press Printer update and check for update now Make sure this printer is plugged into a direct wall, not a surge protector. I just want to see if this makes a difference. Another option you have is setting up schedule on and off. This will help with the sleep mode, as you will determine what time you would like this printer to turn and off. Note-If you decided to go down this route, if you receive faxes all the time, schedule on/off might not be a good idea. If you set a time frame when this printer is supposed to turn off, then you will not receive a fax. Also, if ePrint is enabled, this feature will not work. 1) Press the setup menu (Wrench)2) Press power management3) Press Schedule On Yes and set the time frame4) Press Schedule Off Yes and set the time frame I just want to make sure that your printer isn't going offline because of your router, not by the sleep mode. Just in case, I will provide an HP document on Printer Does Not Maintain Wireless Connection. This will allow you to set a static IP address. Please post your results, as I will be looking forward to hearing from you. Have a great night!

HP Officejet Pro 8610 - Extremely slow printing

Hello,
I have just purchased my new HP 8610 All in one printer. I have set everything up wirelessly. For some reason when I print documents it is extremely slow printing. I cant seem to find the problem for this. For a 5 page documents it could take minutes to print. Please help, thanks in advance

Hi nat1985,
Welcome to the HP Forums!
I understand that your HP Officejet pro 8610 is printing PDF files very slow, and I am happy to help you with this slow printing issue!
For further assistance, I will need to know the following information:
If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
If the printer is connected, Wireless, Ethernet, or USB.
If the printer is able to make copies by itself.
If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
If the printer prints slow from Notepad.
Hope to hear from you, and thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

HP Officejet Pro 8610 Will Not Print

I have a new Officejet Pro 8610 which has been working fine but today it would not print. Everyting else still worked, the printer is detected by USB and all of the cleaning/ alignment procedures work from my PC as normal. Scaning a document worked OK as well. I tried to run a test print from the printer list on windows, this didn't work either. So I uninstalled the supplied software and reinstalled it again, still would not print. At this point I installed the software on my old laptop and connected if by USB again and it worked fine, printed straight away. The only difference in the install was when selecting which additional programmes to install, one said it was already installed even though I had unistalled the software before. That programme was the Product Improvement Study which I can't get rid of. Everytime it is still there. Is this causing my problems and how do I get it off my PC as I am unable to find it anywhere to remove it. Any help would be appreciated.

no one answered this questio for me or even gave me advice....
I got it to print from explorer but not chrome .So for some reason it decided to stop printing from chrome all on its on.Not sure how long it ill print from ie but we'll see .thanks for no advice

Hp officejet pro 8610 | does not print and cannot connect it wireless

Just bought the following printer: Officejet Pro 8610. Installed it with the cd. Installation on the printer goes well, connected to network, strong reception. 1) Cannot make a wireless connection from laptop to printer. Followed all the steps, uninstalled and reinstalled with software from hp site 7 hours worth. Router on/off, firewall on/off etc. 2) Installed not wireless but with a usb cable, this can be done however scanner and copier work but no pinting. Testprint also doesn't work, the internal test print does. Scan doctor said that it was a software problem that could not be solved by said doctor and to uninstall and reinstall the software. Freaking sick of doing that as it does not work. Also installed the basic driver to see if this works, same story, no printing. Laptop is from 2007 with windows XP. I really need to print for work and cannot spend another full day troubleshooting this monster. Either wireless or with usb cable, i dont care....... Please help!!! Thank you Mar

Just bought the following printer: Officejet Pro 8610. Installed it with the cd. Installation on the printer goes well, connected to network, strong reception. 1) Cannot make a wireless connection from laptop to printer. Followed all the steps, uninstalled and reinstalled with software from hp site 7 hours worth. Router on/off, firewall on/off etc. 2) Installed not wireless but with a usb cable, this can be done however scanner and copier work but no pinting. Testprint also doesn't work, the internal test print does. Scan doctor said that it was a software problem that could not be solved by said doctor and to uninstall and reinstall the software. Freaking sick of doing that as it does not work. Also installed the basic driver to see if this works, same story, no printing. Laptop is from 2007 with windows XP. I really need to print for work and cannot spend another full day troubleshooting this monster. Either wireless or with usb cable, i dont care....... Please help!!! Thank you Mar

HP Officejet pro 8610 not connected

I have a new modem and separete Duel Router. Router is Lynksis EA3500 with 2.4 Ghz and 5 Ghz capabilities. Just bought a new HP Officejet Pro 8610 which I now have learned will only run on a 2.4 GHz system. When I connect the printer to the wireless system it shuts down the 5 GHz network. It kicks off all other devices. Those devices can join the 2.4 GHz, but can no longer even see the 5.0 GHz network. Not acceptable.
Do I need a different printer or can this be fixed? I don't understand why the printer won't run on the 2.4 but allow the laptops, desktop and TVs use the 5 GHz. Ridiculous.
I spent 1.5 hours on the phone with Lynksis first and they verified that the router is working perfectly. Then I spent 2 hours talking to HP in India and they just said sorry we will tell HP to make this printer capable for 5.0 in the future.
Not good - ready to return the printer. Any other option???
This question was solved.
View Solution.

First, I'm glad to hear the problem is solved. It also points out a significant problem with third had troubleshooting.
It also reminds me of a time when I was trying to help a customer over the phone (long before we could remotely login to client computers.) I spent a hour or so with this customer trying to figure out the answer to her problem. I eventually jumped in my car and drove over to the customer's office. In the middle of the screen was a big message that answered the problem. When I asked the customer why she didn't tell me about the message, she replied that she didn't believe that it was relavant.
I am surprised that HP even had you change the bandwidth on the router. The defaults nearly always work fine. 802.11 AC uses a wider bandwith than 802.11 G or N. The thing is, the bandwith change is all automatic.

HP Officejet Pro 8610 4X6 Borderless Printing

Hello,
I have an HP Officejet Pro 8610 on Windows 7 x64. It says 4x6 photo paper is supported. But, when I tried to print to this size, the 8610 refuses to pickup the paper. I've tried all the 4x6 HP photo paper settings, but still no go.
Is 4x6" photo paper not supported? Or, how do I get it to print at this size?

Hello,
Please click HERE to access the steps that should resolve the issue.
You may have to try Solution Three .
. If issue still persists, please call HP Tech Support for further assistance.
If you are in US , the toll free # is 1-800-474-6836 .
If you are not in US , then log on to www.hp.com , at bottom-left corner there is a world map icon, click on it and then select the region you belong to, which would then provide support options for you for that region.
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

HP Officejet Pro 8610 - Error Code: " 0xc19a0013" (missing or failed printhead)

I purchased the printer (HP Officejet Pro 8610 e-All-in-one printer) in January, 2015. The printer functioned properly - copy, fax, and scan, until two days ago. Now, it does not print at all. Received an error code: "0xc19a0013" (Missing or Failed Printhead). An expanded version of the error code reads: "The Printhead appears to be missing, not detected, or incorrectly installed. Error Code: 0xc19a0013. The printer uses a removable printhead, HP Ink Cartridges 950 (black) and 951(cmy). I have used HP Support Troubleshooting recommendations: all software and firmware for this printer is installed; the HP ink cartridges are not low or empty; removed the ink cartridges from the printhead and reinstalled them.
There are multible steps in the troubleshooting recommendation, but I stopped at removing the printhead. Because of my technical inexperience, and there were too many ceveats (beware, caution, proper reinstallation, and etc.) with removing the printhead that could cause greater problems. So, I stopped at removing and cleaning the printhead. Also, used the HP Printer Scan Doctor for assistance. The tool for cleaning the printhead doesn't work. What troubles me most with the 0xc19a0013 error code is its explanation: The printhead appears to be missing, not detected, or incorrectly installed. I can use all the help I can get to understand what is going on with the error code that I have received, and how to resolve the malfunctioning printer.
This question was solved.
View Solution.

Contact HP technical support at 800-474-6836 for more options.
If you live outside the US/Canada Region, please click the link below to get the support number for your region.
Country-language selector.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Hp officejet pro 8610 - Unable to connect to server

Hello. I bought a printer hp officejet pro 8610. I have a home worth router Zyxel Keenetik. My laptop and smartphone access to the Internet via a router (to access the Internet proxy server is not required). I set up the printer on a wireless connection. Configured to print from a laptop to a local network - this works fine. And now trying to set up ePrint, but faced with the problem - I can not run a web-service on the printer. The message - "Unable to connect to server". I downloaded from HP new version of firmware for the printer and installed it, but the problem remained.

Hi,
Try setting a manual public DNS as following and check if that may help:
Open the Network tab within the printer's web page.
Select IPv4 within the Wireless section.
Select a Manual IP, then click the Suggest an IP button and allow it a few moments.
Once the fields being updated, change the DNS section as following:
Primary DNS: 8.8.8.8
Secondary DNS: 8.8.4.4.
Apply and save the changes, then try enableing Web Services again and check for any difference.
Please let me know if that may help,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

HP Officejet Pro 8610 - Tray 2

I've just purchased an HP Officejet Pro 8610 with an A8Z70A 2nd tray. The 2nd tray is recognized on the the printer but not on the software.
I am using the 2nd tray for legal size plain paper.
I have updated firmware & drivers. Not fixed.
What do I need to do so I can select Tray 2 when printing for MS Excel?
This question was solved.
View Solution.

Hi,
Be sure to enable the second tray on the driver, then it will become available for selection:
Open the contorl panel and select devices and printers.
Right lick the 8610 printer and select Printer Properties.
Open teh Devices tab.
Set Tray 2 as installed and confirm the changes.
Note: you may also set a form to tray assignment for specific paper sizes for the different trays, that wil automaticalaly select the proper tray for the specific paper size.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

HP Officejet Pro 8610 Catridge Problem

Similar Messages

Maybe you are looking for