Cannot Deliver as low on stock

Hi all,
I have support case. The problem is we can't deliver because we don't have enough stock, but we don't want any availability check which is why we use item category ZBN. The schedule line category is L1 which doesn't have availability check, but does have requirement.
I suggested that they change the material MRP type to ZD (No planning), but this haven't solved the problem.
Can you suggest some possible solution.
Thanks
Bawa

Dear Bawa
You mean system to allow negative stocks. If so, few options are available
- Go to OMJ1 and select the box against the respective plant.
- The other option is In VD51, for the customer and for a material, there is a field Item Usage If you maintain PSHP then you can do post goods issue even stock is not available
- If you maintain item category as TAX in sale order, system will not check whether stock is available or not. You can post the goods issue.
For all the above, please test a scenario, check with your FI people and after their concurrence, proceed accordingly.
thanks
G. Lakshmipathi

Similar Messages

Down payment amount cannot be higher/lower than the preset value Error

Hello. Can anyone help me with this error. When creating a down payment request from a sales order with a billing plan, I get the message 'Down payment amount cannot be higher/lower than the preset value' and the document isn't released to accounting. When creating the sales order, I included a condition type that I created. The billing plan then calculates the down payment request value with the total sum i.e net value plus condition value. Upon creating the down payment request in VF01, I get this message. I did a test and noticed that, if the condition is not included in the sales order, the down payment request is created without errors. How do I correct this? Thanks for you anticipated response.

Hi
As you are getting error, 'Down payment amount cannot be higher/lower than the preset value' ,please check the total value of the document.So in the sales document ,billing plan check what is the invoice value for the first billing date , also check what is the sales order value.Secondly what is the condition type that has been created and for what purpose it is being used.
Regards
Srinath

Document made by Pages cannot deliver through gmail

I just bought Mcbook pro, first time to use apple.
The documents made by PAGES, attached in the gmail, and send it, delivery fails
warning says the gmail cannot deliver.
However JPG or PDF files attached go through no problem.
What coud be the magic?
pls kindly answer to [email protected]

Look at:
https://discussions.apple.com/message/23850019#23850019

Cannot open from lower shell

When i rlogin using "rlogin oracle" I am encountering the below message
suddently
cannot open from lower shell
What could be the reason

Sucurity adminsitrator has restricted my oracle login password as they need to install security patch
I do i start my oracle database, without login oracle

I cannoT Type The lower case leTTer T on my iMac keyboard..

I cannoT Type The lower case leTTer T on my iMac keyboard..

Open the Speech pane of System Preferences and check whether either the listening key or the speech key has become set to that keystroke; if so, change the setting.
(63920)

[SOLVED] CMD Error: CMD cannot start. Low on memory ...??

Dear developers,
Greetings!!
As, I have selected command processor and console window from the catalog item that is necessary to run the command prompt on the WinCE platform. But, when I run the command prompt I got the following error :
CMD Error
CMD cannot start. Low on memory or too many console window open. Please close the some console application and try again.
But, I only got this error when I try to open the console window second time. First time when I click, nothing appears on the screen and I try to open in second time and then I got the above error.
Any one knows the reason for the occurrence of this error???

Hi Partap,
Try changing the console output to '0' instead of COM port in registry as below.
HKey_LOCAL_MACHINE\Drivers\Console\OutputTo to 0
Let me know the result.
rakesh

Why does Verizon hide the fact on their network an iPhone cannot deliver simultaneous voice and data

For me the breaking point was when the local Corporate Store clerk lied to be about their return policy. He even documented the information he gave me and that didn't matter to management or corporate. I made a decision to switch to the iPhone and was specifically told I had 30 days to evaluate weather I could make the transition from android to iOS. If I couldn’t for any reason, I could just return the phone and pay the $35 restocking fee and we were then free to choose from one of the many androids.
After weeks of challenges and countless hours spent with first tier then second tier then a product specialist we all came to the documented conclusion that the iPhone, on Verizons network could not support data and voice at the same time... Every other smart phone on Verizons network could and always has... the IPhone on ATT's network can support both voice and data at once... but Not On Verizons network...
Each tech I spoke with seemed shocked and in utter disbelief that this could be so. They blamed ATT for harboring special privileges hold over from their exclusive relationship with Apple. Which is not true. Then they blamed Apple for delivering handicapped phones to Verizon on purpose. Well, with an Apple Product Manager on the phone listening in on a Verizon Tech giving me this among other excuses why I could not be on the phone and using google at the same time, the Apple Rep finally jumped in and very politely cleared up any miss information the Verizon tier 2 support rep was fumbling out.
So after I had done everything in my power to make the phone work the way I had understood it would. And had every reason to believe it would. As did every Verizon rep I spoke with at first until they did a little research and found Verizon had deliberately been hiding this fact from customers. So I conceded to go back to the Android world for now and let Verizon sort out this glaring deficit hopefully in the near future… Though every support rep concluded that there was no mention of this being fixed or even a problem so not to hold my breath…
I couldn’t have been more shocked or infuriated when I went to exchange the “still in the plastic mint condition iPhone” I was told I had to have brought it back in the first 14 days… I pleaded and argued, even directed the manager to the notes entered in verizon’s own support documentation regarding my case and he said “well I see here where you were told that but that rep was wrong”. That may be so but I based my entire testing and evaluation timeline based on the dates the rep clearly and admittedly told me! The store manager said there was nothing he could do.
Now I mentioned I’m a Network Solutions Provider and being able to be on the phone doing a support call and using my cellular internet at the same time are an absolute must for me to be able to preform my job. Every Verizon smart phone I have ever owned had been able to do this. Now I am told I am STUCK in a two year contract with an inadequate device that I cannot exchange and therefore functionally useless to me.
Verizon corporate nor the store manager cared one bit about my position. They stood behind a little register tape that by signing my credit card receipt I now owed them two more years of my life and now they could care less weather I had a functioning solution or that I had been a loyal customer for over 17 years. Or that I had brought entire small business offices to them for cell services. Just stood there and held a copy of my receipt and said, well you signed it so here is what it will cost ya to get out of it!
He got out a calculator and started running numbers for what I would have to pay to fix this situation… What I would have to pay to even leave Verizon and go get cell service from someone else. It felt dirty … seedy… like being at some 3rd world used car lot where some shyster had gotten someone wrapped up in a contract and now was going to squeeze the life out of a customer even though they couldn’t’ even deliver the service they implied you were going to get in the first place.
In 30 years of being a small business owner I have never encountered an organization that had less integrity or more unscrupulous business practices…
I see post after post of Verizon Customer Support reps answering threads… funny I haven’t found one where a user honestly thanks the rep for actually helping them out……. Please Verizon Customer Support, show me you actually can look at a situation and see an equitable solution where a Customer and the Share Holders can both win…..

Well if this information was as ubiquitous on the web as you suggest, I am puzzled why it took three weeks of troubleshooting with many levels of Verizon support before we collectively concluded this was the situation...
Regarding Reading what I sign... Thanks for that advice though in this situation I was handed a stylus and told to sign a Signature Pad at the check out counter... ONLY AFTER I signed (for the purchase only) was I presented with this return policy conveniently nested in a 3 foot long reciept consisting of paragraphs of Helvitica 6 type set info... I made the assumption that the sales person could correctly answer a direct question regarding the policy I inadvertently signed for when authorizing the credit card charge... Even more concerning is that when by my actions and constant communications with Verizon, my intent was clearly based on the information I had gotten from the sales rep. and if I was given misinformation it would seem Verizon could show some integrity and support the situation with some equitable solution rather than hiding behind contracts collected from sales staff who do not tell customers the truth.....
>> Minor edit <<
Message was edited by: Verizon Moderator

Exchange 2013 cannot deliver mails

Hello,
We purchased and installed an Exchange server 2013 and a domain name ''alaa.com''. Just before purchasing the domain name, we installed exchange, we kept almost everything in default setting and we added an MX INTERNAL Send Connector. We were able to send and
receive internal mails. However, when we purchased the domain name and configured the MX record to point to mail.alaa.com the following happened:
1/ we can send external mails
2/ internal mails leave the Drafts folder but never delivered (sent but not received).
3/ Cannot receive mails sent from the internet. However we receive an email from [email protected] that says this:
http://txt.do/138s
and sometimes this:
http://txt.do/138a
Please, this is urgent, We would really appreciate your help.

Hi,
I cannot see reverse DNS record for "sst.com.tn".
You must create reverse DNS record for delivery to external mail address.
Also, I cant open link http://txt.do/138s and http://txt.do/138a

Disconnect/Reconnect Media (replacing low res stock)

I have a handful of stock video in a my project. I have been using the watermarked preview files from the stock media site, and now I have my purchased non-watermarked files that I need to replace in my edit.
What is the easiest way to do this?
FCP7 I would simply swap them out by "reconnecting media" and point it to the new file and it would connect to it fine since it had the same duration.
I can't seem to figure out the best way to do it here.
Thanks in advance!

You should be able to relink, so that the library clips point to the new files - assuming both versions have the same type of video and audio in them.
Where is the media stored? Inside the library? Or on a separate folder?
If the watermarked versions are on a folder and not inside the library (what is called "external media") you need only delete them - which will cause the clips to appear as offline (a red rectangle with a yellow warning triangle). Then just use the Relink command and point a folder containing the new versions.
If they are inside the library, then you need to basically do the same thing. The clips will be inside a folder called "Original Media" inside a folder for the event, inside the library package. The easiest way to locate them is to control-click in the browser and choose "Reveal in Finder". Then you can delete them as before - but since you'll be changing the contents of a library in the Finder, you should make a backup of the library just in case.
If you have created optimized or proxy media using the trial versions, you'll need to delete that as well (File->Delete Generated Event Files... or File->Delete Generated Library Files...)

Set PO item of one vendor deliver to quality inspection stock ?

Hi Experts,
I would like to know is there any posibillity to add some information on vendor master or PIR or something else , so that the related PO item will be set to quality inspeiction stock automatically ?
here, we won't to set QM indicator in material master, as those materials will not be checked normally, only for the new vendor, we expected the inspction check for one specific period.
BR , shubin

Purhcase order Item level delivery tab you can select stock type as quality inspection. So that whenever you do GRN it will go to quality stock.
While doing GRN, where tab manually you can select quality. That time also it will go to qulaity stock.

Cannot able to see project stock in sloc

Hi Frnds,
i did po for project materials with acct assgnmt "p" and for a wbs element. I have received that materials with mov.type 101. but after completing goods receipt, if i go and check in mmbe..it is not showing any stocks..can anybody tell me the reason for this and where i can see project stock which i have received.
Regards,
Prasath

hi,
PO made with acct. asgn. "P" will be shown as consumed against WBS element. If you want to bring quantity to stock put acct. asgn. "Q" in PO. After GR, the quantity can be seen in MMBE against the WBS element.

Cannot up or low my sound on mac

When i try to click on the butom to go up the sound it shows me a messagem like a circle with a crossed line, and when i try to go down its the same,
on the bar menu nexto to the wi fi icon i cannot higher the sound what can be?

Go step by step and test.
1. System Preference > Sound > Output > Internal Speakers
    Highlight Internal Speakers / Headphones
    Make sure that Mute is not enabled.
2.Plug in and remove the headphone.
    If you see red light in the headphone port, plug the headphone
    in and out of the port 5 or 6 times to flip the microswitch inside.
    Sound output may be stuck in the digital mode.
3. Reset PRAM. http://support.apple.com/kb/PH4405
4. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
5. Applications > Utilities > Audio MIDI Setup
    Audio Devices window
    Side Bar
    Click the Built-in Output.
    Under Mute any of the boxes checked? If so, uncheck it.

Cannot clear blinking low ink lights on Deskjet F4180

printer won't print. Attention black light is blinking and E light is on.
Installed refilled cartridges and still have the problem. Is there a solution
short of buying a new printer?

Hi Conniejb, and welcome to the HP Forums.
I see you are having ink issues. I would like to help with that.
These issues and errors can be caused by having refilled ink. HP does not recommend using anything but HP genuine ink. I would recommend installing HP genuine ink.
I would also recommend referring to this document on Blinking Lights.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

How to deliver goods without stock in that particular plant and storage loc

hi,
sap gurus,
how to deliver goods with out stock in particular plant andstorage location.
or
how to configure negative stocks.
regards,
balajit

Ideally not recommended.
Still if you wish to go for it, follow the steps indicated below
1) Go to OMJ1 and select the box against the respective plant
2) Also go to TCode OMSY, Tick the box "ABp" (Allow Back Posting) for your Company Code, so that you can control postings in the closed period.
3) And finally, go to material master and select Plant data/ Storage2 view, tick the box "Neg. stocks in Plant".
thanks
G. Lakshmipathi

3rd party stock with fully delivered status in PO(without GR)

Dear Gurus,
Currently we are having a 3rd party stock scenario with the below steps:
1. Create a third-party item in a sales order. The system automatically creates a PR for each third-party item in the sales order.
2. Entering a PO to Vendor with reference to the requisition third-party item.
3. The vendor deliver the goods to the customer directly. (We did not post a statistical goods receipt in Inventory Management)
4. Enter the invoice receipt in Invoice Verification
5. Create a billing document in SD.
Problem::
- When checking the PO status in the header tab, the PO is still shown as "not delivered" (or outstanding).
- This has affect our customised PO reports which is using "delivery complete indicator" as one of the key to control of the PO status.
Need resolutions:
- How do we change the PO status to "fully delivered" for 3rd party stock? (Without setting the delivery complete indicator manually?)
- Is it possible to have the "delivery complete indicator" set automatically in PO upon MIRO or Billing document is generated. (The user don't want to post a goods receipt in IM).
- Any user exit?
Looking forward to having your response.

Hi,
As your report for PO is customized you can easily include the logic that can
identify third party PO (from account assignment, Item category fields in EKPO)
now after getting the PO ( and line item ) check EKBE table for LIV document (VGABE =2) and
compare the Qty (MENGE) with PO line item quantity if both are same then consider that as
"closed" or " not include in list".
{and if you want to check the billing document too you can use VBFA table (sales document flow ) to check billing is done or not
against sales order number
to get the sales order number use EKKN table to get the sales order number( VBELN) for PO and item no }
Edited by: redriver on Nov 29, 2011 11:06 AM

Cannot Deliver as low on stock

Similar Messages

Maybe you are looking for