Cannot generate sspi context error
Hello,
I am using SQLServer 2012 SE in Windows 2012 Data Center Edition.
When I am trying to connect to sql server from ssms from different machines (my laptop or some other workstations from office) I am getting the below error.
This only happens if I using AD account to connect to SQLServer. If I choose sql server authentication then I am able to connect without any error. I restarted the services and also rebooted the server but no luck. I even tried deleting the spn and setting
it up but it did not help. All the users are having this issue. Most of them are sysadmins on this sqlserver .
Can someone help fix this error?
Thanks a ton
Hello,
Is it possible to remove the computer from active directory and then add it back to the active directory domain again?
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com
Similar Messages
-
Target principal name is incorrect - cannot generate SSPI context
First off, yes, I've looked at numerous articles on this subject and haven't yet found someone with a similar situation and none of the resolutions I've found seem applicable.
My situation: Server 2008R2 Enterprise with SQL 2012 Standard. I have two instances running on this server, DEV and TEST. I do not have a default (unnamed) instance. This is one of the differences between my situation and every other
article I've looked at. I AM able to connect remotely to the DEV instance, but the TEST instance give me the SSPI error. To take it a step further, the SQL services aren't running under domain credentials; they're running under local credentials.
These two issues don't match anything I've found on the subject so far.
I ran "setspn -L" against the server's machine account (since the SQL services are local, not domain) and here's what I got:
MSSQLSvc/[server FQDN]:49592
MSSQLSvc/[server FQDN]:TEST
MSSQLSvc/[server FQDN]:49487
MSSQLSvc/[server FQDN]:DEV
WSMAN/[server]
WSMAN/[server FQDN]
TERMSERV/[server FQDN]
TERMSERV/[server]
RestrictedKrbHost/[server]
HOST/[server]
RestrictedKrbHost/[server FQDN]
HOST/[server FQDN]
The server is of course a domain member, and we only have a single domain, so there's no cross-domain/forest stuff going on.
Remotely, SA authentication works against both instances. Locally, both SA and Windows authentication work against both instances. Remotely, Windows authentication works against the DEV instance, but not against the TEST instance, returning the
error "The target principal name is incorrect. Cannot generate SSPI context."
Both database have identical settings in the SQL Config Mgr (Shared Memory and TCP/IP enabled). Both instances are set to allow remote logon.
The security for the various services:
SQL Server (DEV) = NT Service\MSSQL$DEV
SQL Server (TEST) = NT Service\MSSQL$TEST
SQL Server Agent (DEV) = NT Service\SQLAgent$DEV
SQL Server Agent (TEST) = NT Service\SQLAgent$TEST
SQL Server Browser = Local Service
On both instances, the query "exec xp_readerrorlog 0,1,'could not register the Service Principal Name',Null" comes back with two entries from when the system was installed, saying it was unable to register the SPN. That makes sense, because
SQL isn't running with domain credentials, although the SPNs ARE apparently in AD (see above).
On both instances, the query "select net_transport, auth_scheme from sys.dm_exec_connections where session_id=@@spid" returns the same thing - "shared memory", "NTLM". Basically, I can find no configuration difference
between the two instances.
Anyone got any ideas?Hi Todd,
According to your description, we need to make sure the typed server name is right, and verify if your windows account is valid when you connect to the test instance remotely by using Windows authentication. You can refer to the following steps for checking
the login name.
1.Log in the test instance remotely by using sa authentication.
2. Enter the security and check if the windows account is valid.
In addition, there is more details about how to troubleshoot the "Cannot generate SSPI context" error message, you can review the article.
http://support.microsoft.com/kb/811889
Thanks,
Sofiya Li
If you have any feedback on our support, please click here.
Sofiya Li
TechNet Community Support -
Error while generating the context node
Hi ,
Requirement is to add the marketing attribute field under the Account details overview Page. As the field was not available in the context node i have added a new context node in the Account details. I used the wizard and added the context node BuilmktattributeRel so as i can add "Attribute set" under the BP overview page."
Now after adding the context node and while executing i am unable to see the overview view page, i am getting an error :
1. Component GET_ATTRIBUTE does not exist
2. Determination of BOL attributes failed
Also i am unable to regenrate the GET_I_method. If i want to delete the Zcontextnode, i am unable to do so.
Kindly help me with the technical approach to add the context node in the overview page.
Thanks in advance,
SunilOne thread would have been sufficient.
Error while generating the context node -
Error in planning sequence- 'Cannot generate combinations of multiprovider'
Hi Gurus,
I am facing a problem while executing my planning sequence in modeller. Aggregation level contains all characteristics in multiprovider. Multiprovider contains actual and planned cubes. Filter is based on product name in modeller. Planning function is copy. Characteristics to be changed in calyear. But the error generated while executing planning sequence is
'To value - 1 for subprocess 1 produces following errors.
'Cannot generate combinations for multiprovider'
'Cannot generate combinations in step 00'.
I would really appreciate the time and effort which will be taken by gurus.
Thanks in advance.
Jerry.Hi,
1 Before Unchanged 2007 300,00 2,000 600,00 IC_MODEL
1 After Unchanged 2007 300,00 2,000 600,00 IC_MODEL
2 Reference Data 2007 300,00 2,000 600,00 IC_MODEL
2007 is the calyear in the actual cube ic_model.
in copy function i have specified that 2007 should be changed to 2011 and ic_model(actual cube) to planned cube. -
Cannot generate stub objects...access denied
Has anyone come accross this?
I am attempting to access a coldfusion 9 webservice that I created and am also consuming. The pair works fine when both requesting page and the webservice are resident on my development server, but generates the following error when in production:
Error Occurred While Processing Request
Cannot generate stub objects for web service invocation.
Name: http://casadiablo.homeip.net/WebServices/SimpleWebService.cfc?wsdl. WSDL: http://casadiablo.homeip.net/WebServices/SimpleWebService.cfc?wsdl. java.security.AccessControlException: access denied ("java.io.FilePermission" "C:/Program Files/Java/jdk1.7.0_04/jre/lib/wsdl.properties" "read") It is recommended that you use a web browser to retrieve and examine the requested WSDL document to ensure it is correct. If the requested WSDL document cannot be retrieved or is dynamically generated, it is likely that the target web service has programming errors.
The error occurred in D:/home/casadiablo.net/wwwroot/indexCDNet.cfm: line 10
Called from "java.io.FilePermission" "C: line -1
Called from "java.io.FilePermission" "C: line -1
Called from D:/home/casadiablo.net/wwwroot/indexCDNet.cfm: line 10
Note: the wsdl renders just fine in a browser at the address I'm using so it's not a can't find it or location issue. I'm no expert in reading wsdl files, though, so it could render some clues if I knew what to look for.
For context:
When I go from my development environment to production, the consuming page is on casadiablo.net/indexCDnet.cfm (hosted by Hostek). The webservice is on a PC in my home that has a dedicated IP address.
I've searched all over for an "access denied" java error (related to CF web services) discussion and have found nothing. Any ideas as to how to troubleshoot where in this chain a java.io.FilePermission error might be triggered would be greatly appreciated!!
Message was edited by: CFsolar
Case solved. It turns out that this is totally a Hostek issue. After exhausting all other options (including uninstalling and reinstalling java), it was a setting on the security sandbox that caused the error. Well at least this will be out there for anyone else working with webservices and Hostek!Did anyone ever resolve this issue as I seem to be having the exact same issue???
-
OSB: Cannot acquire data source error while using JCA DBAdapter in OSB
Hi All,
I've entered 'Cannot acquire data source' error while using JCA DBAdapter in OSB.
Error infor are as follows:
The invocation resulted in an error: Invoke JCA outbound service failed with application error, exception: com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/DBAdapter1/RetrievePersonService [ RetrievePersonService_ptt::RetrievePersonServiceSelect(RetrievePersonServiceSelect_inputParameters,PersonTCollection) ] - WSIF JCA Execute of operation 'RetrievePersonServiceSelect' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/soademoDatabase].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.soademoDatabase'. Resolved 'jdbc'; remaining name 'soademoDatabase'.
; nested exception is:
BINDING.JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
JNDI Name for the Database pool: eis/DB/soademoDatabase
JNDI Name for the Data source: jdbc/soademoDatabase
I created a basic DBAdapter in JDeveloper, got the xsd file, wsdl file, .jca file and the topLink mapping file imported them into OSB project.
Then I used the .jca file to generate a business service, and tested, then the error occurs as described above.
Login info in RetrievePersonService-or-mappings.xml
<login xsi:type="database-login">
<platform-class>org.eclipse.persistence.platform.database.oracle.Oracle9Platform</platform-class>
<user-name></user-name>
<connection-url></connection-url>
</login>
jca file content are as follows:
<adapter-config name="RetrievePersonService" adapter="Database Adapter" wsdlLocation="RetrievePersonService.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/DB/soademoDatabase" UIConnectionName="Connection1" adapterRef=""/>
<endpoint-interaction portType="RetrievePersonService_ptt" operation="RetrievePersonServiceSelect">
<interaction-spec className="oracle.tip.adapter.db.DBReadInteractionSpec">
<property name="DescriptorName" value="RetrievePersonService.PersonT"/>
<property name="QueryName" value="RetrievePersonServiceSelect"/>
<property name="MappingsMetaDataURL" value="RetrievePersonService-or-mappings.xml"/>
<property name="ReturnSingleResultSet" value="false"/>
<property name="GetActiveUnitOfWork" value="false"/>
</interaction-spec>
</endpoint-interaction>
</adapter-config>
RetrievePersonService_db.wsdl are as follows:
<?xml version="1.0" encoding="UTF-8"?>
<WL5G3N0:definitions name="RetrievePersonService-concrete" targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService" xmlns:WL5G3N0="http://schemas.xmlsoap.org/wsdl/" xmlns:WL5G3N1="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService" xmlns:WL5G3N2="http://schemas.xmlsoap.org/wsdl/soap/">
<WL5G3N0:import location="RetrievePersonService.wsdl" namespace="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService"/>
<WL5G3N0:binding name="RetrievePersonService_ptt-binding" type="WL5G3N1:RetrievePersonService_ptt">
<WL5G3N2:binding style="document" transport="http://www.bea.com/transport/2007/05/jca"/>
<WL5G3N0:operation name="RetrievePersonServiceSelect">
<WL5G3N2:operation soapAction="RetrievePersonServiceSelect"/>
<WL5G3N0:input>
<WL5G3N2:body use="literal"/>
</WL5G3N0:input>
<WL5G3N0:output>
<WL5G3N2:body use="literal"/>
</WL5G3N0:output>
</WL5G3N0:operation>
</WL5G3N0:binding>
<WL5G3N0:service name="RetrievePersonService_ptt-bindingQSService">
<WL5G3N0:port binding="WL5G3N1:RetrievePersonService_ptt-binding" name="RetrievePersonService_ptt-bindingQSPort">
<WL5G3N2:address location="jca://eis/DB/soademoDatabase"/>
</WL5G3N0:port>
</WL5G3N0:service>
</WL5G3N0:definitions>
Any suggestion is appricated .
Thanks in advance!
Edited by: user11262117 on Jan 26, 2011 5:28 PMHi Anuj,
Thanks for your reply!
I found that the data source is registered on server soa_server1 as follows:
Binding Name: jdbc.soademoDatabase
Class: weblogic.jdbc.common.internal.RmiDataSource_1033_WLStub
Hash Code: 80328036
toString Results: ClusterableRemoteRef(8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1 [8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1/291])/291
Binding Name: jdbc.SOADataSource
Class: weblogic.jdbc.common.internal.RmiDataSource_1033_WLStub
Hash Code: 92966755
toString Results: ClusterableRemoteRef(8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1 [8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1/285])/285
I don't know how to determine which server the DBAdapter is targetted to.
But I found the following information:
Under Deoloyment->DBAdapter->Monitoring->Outbound Connection Pools
Outbound Connection Pool Server State Current Connections Created Connections
eis/DB/SOADemo AdminServer Running 1 1
eis/DB/SOADemo soa_server1 Running 1 1
eis/DB/soademoDatabase AdminServer Running 1 1
eis/DB/soademoDatabase soa_server1 Running 1 1
The DbAdapter is related to the following files:
C:\ Oracle\ Middleware\ home_11gR1\ Oracle_SOA1\ soa\ connectors\ DbAdapter. rar
C:\ Oracle\ Middleware\ home_11gR1\ Oracle_SOA1\ soa\ DBPlan\ Plan. xml
I unzipped DbAdapter.rar, opened weblogic-ra.xml and found that there's only one data source is registered:
<?xml version="1.0"?>
<weblogic-connector xmlns="http://www.bea.com/ns/weblogic/90">
<enable-global-access-to-classes>true</enable-global-access-to-classes>
<outbound-resource-adapter>
<default-connection-properties>
<pool-params>
<initial-capacity>1</initial-capacity>
<max-capacity>1000</max-capacity>
</pool-params>
<properties>
<property>
<name>usesNativeSequencing</name>
<value>true</value>
</property>
<property>
<name>sequencePreallocationSize</name>
<value>50</value>
</property>
<property>
<name>defaultNChar</name>
<value>false</value>
</property>
<property>
<name>usesBatchWriting</name>
<value>true</value>
</property>
<property>
<name>usesSkipLocking</name>
<value>true</value>
</property>
</properties>
</default-connection-properties>
<connection-definition-group>
<connection-factory-interface>javax.resource.cci.ConnectionFactory</connection-factory-interface>
<connection-instance>
<jndi-name>eis/DB/SOADemo</jndi-name>
<connection-properties>
<properties>
<property>
<name>xADataSourceName</name>
<value>jdbc/SOADataSource</value>
</property>
<property>
<name>dataSourceName</name>
<value></value>
</property>
<property>
<name>platformClassName</name>
<value>org.eclipse.persistence.platform.database.Oracle10Platform</value>
</property>
</properties>
</connection-properties>
</connection-instance>
</connection-definition-group>
</outbound-resource-adapter>
</weblogic-connector>
Then I decided to use eis/DB/SOADemo for testing.
For JDeveloper project, after I deployed to weblogic server, it works fine.
But for OSB project referencing wsdl, jca and mapping file from JDeveloper project, still got the same error as follows:
BEA-380001: Invoke JCA outbound service failed with application error, exception:
com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/DBAdapterTest/DBReader [ DBReader_ptt::DBReaderSelect(DBReaderSelect_inputParameters,PersonTCollection) ] - WSIF JCA Execute of operation 'DBReaderSelect' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/SOADataSource].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.SOADataSource'. Resolved 'jdbc'; remaining name 'SOADataSource'.
; nested exception is:
BINDING.JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/SOADataSource].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.SOADataSource'. Resolved 'jdbc'; remaining name 'SOADataSource'.
You may need to configure the connection settings in the deployment descriptor (i.e. DbAdapter.rar#META-INF/weblogic-ra.xml) and restart the server. This exception is considered not retriable, likely due to a modelling mistake.
It almost drive me crazy!!:-(
What's the purpose of 'weblogic-ra.xml' under the folder of 'C:\Oracle\Middleware\home_11gR1\Oracle_OSB1\lib\external\adapters\META-INF'?
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- -
The BEx Analyzer cannot generate VBA code due to the security settings
Hello experts,
when I try to open a query in BEx Analyser I get this error message for each Item of the Query:
Diagnosis
The BEx Analyzer cannot generate VBA code due to the security settings.
System Response
VBA code is not generated.
Procedure
Choose Tools -> Macro -> Security.
On the Trusted Publishers tab page, select Trust access to Visual Basic project.
Choose OK.
Close the BEx Analyzer and continue working as before.
Access to Visual Basic project is only needed when generating VBA code.
This only takes place in design mode or when 3.x workbooks are upgraded.
Of course I did exactly what was recommanded in the "procedure-section" of this error message. But BEx ist still not working!
I use SAP NetWeaver 7.0 together with MS Excel 2007
Thanks
AxelHello experts,
I am an additional person interested in the way this issue was solved.
I confirm that the issue is coming from the SP2 of Microsoft Office (I have another environnement without the SP2 and everything works well), and I am in a situation where I can't remove the update.
Regards
Guillaume P.
EDIT :
Solution found : I applied the bi710sp10p_1001-10004472.exe patch
(downloaded via the download maanger : Support Packages and Patches - Entry by Application Group" SAP Frontend Components" BI ADDON FOR SAP GUI" BI 7.0 ADDON FOR SAP GUI 7.10)
Edited by: GUILLAUME PETIAUX on Apr 13, 2010 10:29 AM -
Situation is this.. was using 8.1.6 EE and Oracle Portal.. was able to get the Oracle Portal page up and after a while the application died.. this happened numerous times. Found in one of these forums that a bug existed (UTL_HTTP) and recommended going to 8.1.7 EE because of a patch. I migrated my 8.1.6 EE to 8.1.7 EE(made sure procedures & packages were valid). I'm able to bring up the Oracle Portal page but when I go to login I get this:
Error: You cannot login because an error occurred while retrieving the login URL. (WWC-41441)
Thoughts?Hi,
I ran ssodatan again and got the following error:
ERROR: Setting Login Server Partner App
ORA-06508: PL/SQL: could not find program unit being called
I then found out that the wwsec_sso_enabler_private in the SSO
schema is invalid and this was causing the above error. I tried
recompiling the package but got the following error:
Errors for PACKAGE BODY WWSEC_SSO_ENABLER_PRIVATE:
LINE/COL ERROR
151/6 PL/SQL: SQL Statement ignored
151/13 PLS-00320: the declaration of the type of this
expression is incomplete or malformed
151/20 PLS-00336: non-object-table "SECI" illegal in this
context
160/4 PL/SQL: SQL Statement ignored
643/6 PL/SQL: SQL Statement ignored
643/13 PLS-00320: the declaration of the type of this
expression is incomplete or malformed
643/20 PLS-00336: non-object-table "SECI" illegal in this
context
LINE/COL ERROR
651/4 PL/SQL: SQL Statement ignored
713/4 PL/SQL: SQL Statement ignored
713/50 PLS-00382: expression is of wrong type
745/3 PL/SQL: SQL Statement ignored
746/10 PLS-00389: table, view or alias name "ENBCONFIG" not
allowed in this context
The same package in the Portal schema is valid. Will an
export of this package from a working instance and an import into
the above instance solve this problem?
Thanks and Regards,
Rupesh -
Does anyone have an idea if the WSDL is wrong or if it's an XI problem?
thanks
Johann Marty
TeamWork Management SA
Geneva
Cannot generate proxy (object missing in WSDL, see long text)
Message no. SPRX084
Background
During proxy generation, an interface description in WSDL format is fetched from the Integration Builder or another source and interpreted. This WSDL document must describe the whole interface correctly.
==> Display WSDL Document
Diagnosis
In the WSDL document, the object
"<message name="existDocument"> <part name="invo..."
from the namespace
"http://tempuri.org/"
links to the object
from the namespace
However, this last object does not exist in the WSDL document.
System response
ABAP proxy generation expects that all directly and indirectly referenced objects are in the WSDL document. Therefore, no proxy can be generated for this WSDL and the system displays an error message.
Procedure
This situation can have different causes:
Object "" not been defined
Object "" saved in the wrong namespace
In the reference to object "", the wrong name was specified
In the reference to object "", the wrong namespace "" was specified
Internal error in the service that constructs the WSDL document
Internal error in ABAP proxy generationHi,
Just cross check with your configuration details.
Also try to recreate the proxy and activate it.-
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
Regards,
Moorthy -
Cannot generate .chm; no images are compiling.
Thank you in advance for any help. Here is the situation: I am using RoboHelp HTML, ver. 8 and have a project that I cannot generate a .chm file for. Each time I try it runs through the compiler, the output shows .htm files but no image files are included in the compiling process and I end up with a "Fatal Error: Unexpected error from Microsoft HTML compiler" message.
To generate the file I am going to: File, Generate, Primary Layout (Microsoft HTML Help). When I try to open the .chm file I get a message that says "Cannot open the file: mk:@MSITStore:C|(the directory I saved it to).
There are broken links which haven't been fixed yet but we would like to be able to still generate a .chm file so content can be reviewed. Is it possible to have a successful .chm file compiled if you have broken links?
Thank you again for any help!Hi,
I can't say I have a solution to your problem but I have run into similar situations. Unfortunately, I don't seem to have documented them anywhere...thus I will have to rely on my sketchy memory.
First though, I will respond with two points I am quite certain about:
- Having broken links in your project should not cause any generation problems other than the obvious missing links in the output CHM.
- You do not see any images in the compiling process because there is a problem earlier on in the html compilation part.
In my case, I had a project with a multi-level folder hierarchy. With longer filenames totalling a very large number of total characters in the full path, the project would take a very long time to build and, ultimately, I would end up with a "Fatal Error". IF you have a project with even a single instance of a very long full path, this could be the source of the problem. Keep in mind that during the compilation process the full file path is lengthened by the addition of the temporary folder in which the product is built, by default, in the !SSL! folder. My solution was to simply generate to an output folder at the top level e.g. C:\Output. It may, however, be the case that you would have to shorten some of your file/folder names.
In other cases, I could not find a culprit per se, but ended up deleting the .cpd, which is known to sometimes become corrupt. Upon opening the project again, a fresh .cpd was built and the project ran without issue.
Obviously, if you try either of these suggestions, I highly recommend ensuring you have a backup if one does not already exist on a version control system. -
I was trying to create an index on some table
SQL>create indx doc_index docs(text)
indextype is ctxsys.contxt;
however I always got back all these errors
ORA-29855: error occured in the execution of ODCIINDEXCREATE routine
ORA-20000: COnText error:
DRG-10516: failed to perform DDL operation due to an Oracle error
ORA-01552: cannot use system rollback segment for non-system tablespace 'DRSYS'
ORA-06512: at "CTXSYS.DRUE", line 122
ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line34
ORA-06512: at line 1
I may not configure the InterMedia correctly, Is any body know what is the problem here??
Please Help
Thanks,
WeiIndextype is ctxsys.CONTEXT not "ctxsys.contxt".
Also please check your space availability.
null -
Hi,
I have a Portal install with the following specifications:
OS - Sun Solaris 2.6
DB - 8.1.7.0.0
iAS - 1.0.2.2
Portal - 3.0.9.0.7
It was working fine. Then the initjvm.sql that installs the JVM
in the database was run. This was done as part of the steps
required for enabling the UTL_SMTP. The script ran without any
errors but after that Portal Login was failing with the following
error:
You cannot login because an error occurred while retrieving the
login URL. (WWC-41441)
and there were no Java classes present in the Portal or SSO
schema. To overcome this error I reloaded the SSOHash classes to
Portal and SSO schemas and ran ssodatan. The script ran
successfully and I was able to login to the Portal after that.
However, if I login as the administrator and try to create or
edit users from the Administer tab of Portal, the same error
occurs again:
You cannot login because an error occurred while retrieving the
login URL. (WWC-41441)
I can programmatically add users using the Security APIs.
The wwsec_enabler_config_info$ table of the Portal schema
contains one row but the wwsec_enabler_config_info$ table of the
SSO Schema contains no rows.
This install of Portal is hosting a number of applications and as
such running opca again is not an option.
Any workaround for this?
Thanks,
RupeshHi,
I ran ssodatan again and got the following error:
ERROR: Setting Login Server Partner App
ORA-06508: PL/SQL: could not find program unit being called
I then found out that the wwsec_sso_enabler_private in the SSO
schema is invalid and this was causing the above error. I tried
recompiling the package but got the following error:
Errors for PACKAGE BODY WWSEC_SSO_ENABLER_PRIVATE:
LINE/COL ERROR
151/6 PL/SQL: SQL Statement ignored
151/13 PLS-00320: the declaration of the type of this
expression is incomplete or malformed
151/20 PLS-00336: non-object-table "SECI" illegal in this
context
160/4 PL/SQL: SQL Statement ignored
643/6 PL/SQL: SQL Statement ignored
643/13 PLS-00320: the declaration of the type of this
expression is incomplete or malformed
643/20 PLS-00336: non-object-table "SECI" illegal in this
context
LINE/COL ERROR
651/4 PL/SQL: SQL Statement ignored
713/4 PL/SQL: SQL Statement ignored
713/50 PLS-00382: expression is of wrong type
745/3 PL/SQL: SQL Statement ignored
746/10 PLS-00389: table, view or alias name "ENBCONFIG" not
allowed in this context
The same package in the Portal schema is valid. Will an
export of this package from a working instance and an import into
the above instance solve this problem?
Thanks and Regards,
Rupesh -
Cannot retrieve teplate structure: Error creating PDF
Hi,
I've installed a Composite Form as the start of a process, and when I go to Administration and try to generate the PDF file I get the following error:
Cannot retrieve teplate structure: Error creating PDF
When I go to the log, I get this trace:
Error creating PDF
com.sap.caf.eu.gp.base.exception.EngineException: Error creating PDF
at com.sap.caf.eu.gp.model.forms.adapter.FormAdapterMediator.createInstanceDocument(FormAdapterMediator.java:462)
at com.sap.caf.eu.gp.model.forms.preproc.FormPreprocessor.instanciateTemplate(FormPreprocessor.java:1982)
at com.sap.caf.eu.gp.model.forms.preproc.FormPreprocessor.createImpersonalizedFormInstance(FormPreprocessor.java:1170)
at com.sap.caf.eu.gp.ui.admin.uforms.UnpersonalizedFormsManager.createNewForm(UnpersonalizedFormsManager.java:888)
at com.sap.caf.eu.gp.ui.admin.uforms.UnpersonalizedFormsManager.createForm(UnpersonalizedFormsManager.java:457)
at com.sap.caf.eu.gp.ui.admin.uforms.wdp.InternalUnpersonalizedFormsManager.createForm(InternalUnpersonalizedFormsManager.java:190)
at com.sap.caf.eu.gp.ui.admin.uforms.CreateUForm.onActionOK(CreateUForm.java:243)
at com.sap.caf.eu.gp.ui.admin.uforms.wdp.InternalCreateUForm.wdInvokeEventHandler(InternalCreateUForm.java:156)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:131)
at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:72)
at com.sap.tc.webdynpro.clientserver.phases.ProcessingEventPhase.doHandleActionEvent(ProcessingEventPhase.java:156)
at com.sap.tc.webdynpro.clientserver.phases.ProcessingEventPhase.execute(ProcessingEventPhase.java:91)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequestPartly(WindowPhaseModel.java:161)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doProcessRequest(WindowPhaseModel.java:109)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:96)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:469)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:52)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.doExecute(ClientApplication.java:1395)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.doProcessing(ClientApplication.java:1215)
at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.delegateToApplicationDoProcessing(AbstractExecutionContextDispatcher.java:158)
at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.DispatchHandlerForAppProcessing.doService(DispatchHandlerForAppProcessing.java:35)
at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.AbstractDispatchHandler.service(AbstractDispatchHandler.java:116)
at com.sap.engine.services.servlets_jsp.server.deploy.impl.module.IRequestDispatcherImpl.dispatch(IRequestDispatcherImpl.java:93)
at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.ExecutionContextDispatcher.dispatchToApplicationDoProcessing(ExecutionContextDispatcher.java:114)
at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.dispatch(AbstractExecutionContextDispatcher.java:81)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.dispatch(ApplicationSession.java:506)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.dispatch(ApplicationSession.java:526)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doApplicationProcessingStandalone(ApplicationSession.java:457)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:248)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:699)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:231)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:230)
at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.delegateToRequestManager(AbstractExecutionContextDispatcher.java:205)
at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.DispatchHandlerForRequestManager.doService(DispatchHandlerForRequestManager.java:38)
at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.AbstractDispatchHandler.service(AbstractDispatchHandler.java:116)
at com.sap.engine.services.servlets_jsp.server.deploy.impl.module.IRequestDispatcherImpl.dispatch(IRequestDispatcherImpl.java:93)
at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.ExecutionContextDispatcher.dispatchToRequestManager(ExecutionContextDispatcher.java:140)
at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.dispatch(AbstractExecutionContextDispatcher.java:93)
at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.dispatch(AbstractExecutionContextDispatcher.java:105)
at com.sap.tc.webdynpro.serverimpl.core.AbstractDispatcherServlet.doContent(AbstractDispatcherServlet.java:87)
at com.sap.tc.webdynpro.serverimpl.core.AbstractDispatcherServlet.doPost(AbstractDispatcherServlet.java:61)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:66)
at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:32)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:431)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:289)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:376)
at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:85)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:160)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:67)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:309)
at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.run(Processor.java:222)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:152)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:247)
Caused by: com.sap.caf.eu.gp.model.forms.exceptions.AdapterException: Error creating PDF
at com.sap.caf.eu.gp.model.forms.exceptionhandling.ExceptionHandler.throwAdapterException(ExceptionHandler.java:851)
at com.sap.caf.eu.gp.model.forms.adapter.pdf.AdobeDSFormAdapter.createInstanceDocuments(AdobeDSFormAdapter.java:180)
at com.sap.caf.eu.gp.model.forms.adapter.pdf.AdobeAdapter.createInstanceDocument(AdobeAdapter.java:204)
at com.sap.caf.eu.gp.model.forms.adapter.FormAdapterMediator.createInstanceDocument(FormAdapterMediator.java:456)
... 70 more
Caused by: com.sap.tc.adobe.pdfdocument.base.core.PDFDocumentRuntimeException: PDFDocument Processor failed to process RenderRequest...
at com.sap.tc.adobe.pdfdocument.base.core.PDFDocumentProcessor.process(PDFDocumentProcessor.java:55)
at com.sap.tc.adobe.pdfdocument.base.core.PDFDocumentCreationContext.execute(PDFDocumentCreationContext.java:136)
at com.sap.tc.adobe.pdfdocument.impl.PDFCreationContextImpl.execute(PDFCreationContextImpl.java:90)
at com.sap.caf.eu.gp.model.forms.adapter.pdf.AdobeDSFormAdapter.createInstanceDocuments(AdobeDSFormAdapter.java:152)
... 72 more
Caused by: com.sap.tc.adobe.pdfobject.core.PDFObjectRuntimeException: Logical Target ConfigPort_Document not mapped to a physical system.
at com.sap.tc.adobe.pdfobject.core.PDFObjectDII.invoke(PDFObjectDII.java:349)
at com.sap.tc.adobe.pdfobject.core.PDFObjectDII.doSoapCall(PDFObjectDII.java:81)
at com.sap.tc.adobe.pdfobject.core.PDFObject.render(PDFObject.java:3610)
at com.sap.tc.adobe.pdfdocument.base.core.PDFDocumentRenderHandler.handle(PDFDocumentRenderHandler.java:152)
at com.sap.tc.adobe.pdfdocument.base.core.PDFDocumentProcessor.process(PDFDocumentProcessor.java:52)
... 75 more
Caused by: com.sap.engine.services.webservices.espbase.discovery.TargetNotMappedException: Logical Target ConfigPort_Document not mapped to a physical system.
at com.sap.esi.esp.service.server.query.discovery.DestinationsHelperImpl.getDSTTemplateForSystem(DestinationsHelperImpl.java:894)
at com.sap.esi.esp.service.server.query.discovery.DestinationsHelperImpl.getWSDLUrl(DestinationsHelperImpl.java:397)
at com.sap.engine.services.webservices.espbase.client.dynamic.GenericServiceFactory.getWSDLUrl(GenericServiceFactory.java:222)
at com.sap.engine.services.webservices.espbase.client.dynamic.GenericServiceFactory.createService_NewInstance(GenericServiceFactory.java:187)
at com.sap.engine.services.webservices.espbase.client.dynamic.GenericServiceFactory.createService(GenericServiceFactory.java:175)
at com.sap.engine.services.webservices.espbase.client.dynamic.GenericServiceFactory.createService(GenericServiceFactory.java:160)
at com.sap.tc.adobe.pdfobject.core.PDFObjectDII.invoke(PDFObjectDII.java:278)
... 79 moreThe address is http://<host>:<port>/inspection.wsil
It need not be localhost. Any address that's visible to the WAS where you are configuring should work. Make sure to provide the user account and password configured for ADS on the security settings of the destination.
One other thing I forgot to ask - did you do all the steps requried to configure ADS with CE? If not, please send me your email address and I'll send you the doc.
Thanks!
Rao -
After Effects download - Invalid Product Context error
Trying to download After Effects from :
http://www.adobe.com/cfusion/tdrc/index.cfm?product=after_effects
getting error "Invalid Product Context" "Error communicating with adobe.com (error 107)....."
Tried from multiple computers with different browsers.. cannot get it to download!Jeff! Are you not listening? THERE IS NO OPTION TO CHOOSE THE FOLDER TO DOWNLOAD TO, It fails before it gets this far. I've tried this with Chrome and Firefox, and I get the same result. And as I say, it seems odd to me that Dreamweaver, Illustrator and Photoshop CS6 would would all download smoothly, and without problem, if there were a browser issue causing the problem with After Effects. I will also say again that I was having this same exact problem trying to download AE CS5.5 just prior to the update. I'm presuming that After Effects trial is coming off of a different server? Has anyone checked that machine to make sure it's working, connected, etc.? The message I'm receiving sounds to me like ADA goes to DREAMWEAVER.ADOBE.COM and connects and downloads no problem, it goes to ILLUSTRATOR.ADOBE.COM and connects and downloads no problem, it tries to go to AFTEREFFECTS.ADOBE.COM and can't make a connection. Perhaps Adobe needs to check their hardware?
-
Net8 listener conflict (Context error)
I have configured listener.ora and tnanames.ora in order to set up the external procedure. After the restart, extproc seems working
LSNRCTL> start
Services Summary...
ora1 has 1 service handler(s)
PLSExtProc has 1 service handler(s)
however when I try to create index as
create index doc_index on docs(text)
indextype is ctxsys.context;
it still give me the error
ERROR at line 1:
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-20000: ConText error:
DRG-50704: Net8 listener is not running or cannot start external procedures
ORA-28575: unable to open RPC connection to external procedure agent
ORA-06512: at "CTXSYS.DRUE", line 122
ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 34
ORA-06512: at line 1
why is that? itried
tnsping extproc_connection_data
it gave me
TNS Ping Utility for Linux: Version 8.1.5.0.0 - Production on 15-MAY-01 22:29:25
(c) Copyright 1997 Oracle Corporation. All rights reserved.
Attempting to contact (ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC))
TNS-12541: TNS:no listener
How is this possible? The service PLSExtProc is listed in the listener
Anyboday have a clue why?
please help
WeiI have configured listener.ora and tnanames.ora in order to set up the external procedure. After the restart, extproc seems working
LSNRCTL> start
Services Summary...
ora1 has 1 service handler(s)
PLSExtProc has 1 service handler(s)
however when I try to create index as
create index doc_index on docs(text)
indextype is ctxsys.context;
it still give me the error
ERROR at line 1:
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-20000: ConText error:
DRG-50704: Net8 listener is not running or cannot start external procedures
ORA-28575: unable to open RPC connection to external procedure agent
ORA-06512: at "CTXSYS.DRUE", line 122
ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 34
ORA-06512: at line 1
why is that? itried
tnsping extproc_connection_data
it gave me
TNS Ping Utility for Linux: Version 8.1.5.0.0 - Production on 15-MAY-01 22:29:25
(c) Copyright 1997 Oracle Corporation. All rights reserved.
Attempting to contact (ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC))
TNS-12541: TNS:no listener
How is this possible? The service PLSExtProc is listed in the listener
Anyboday have a clue why?
please help
Wei
Maybe you are looking for
-
Found WindowShade X 4.3 in System Preferences ?
I just noticed this application in my system preferences. I had a recent crash/hang with Safari, and looking over the report to send to Apple: I noticed in the report in several lines the words related to WindowShade X 4.3, Application Enhancer, and
-
WRT54G Wireless router works on desktop, but not laptop
I have a WRT54G wireless router with version 1.00.4 It works on my desktop, I can log into the net no prob My laptop however (dell w/ windows xp) does not even recognize it. Wierd thing is, it worked perfectly with no problems today, I have been goin
-
Simple question. Can i use the iPad charger in my iPod touch?
Simple question. Can i use the iPad charger in my iPod touch?
-
Does anyone know if Apple's iPhoto plans to support RAW usage for the D-Lux 2 and new M8 cameras? The new M8 uses DNG format. Thanks! MacBook Pro 17" Mac OS X (10.4.7) MacBook, iPod mini, iPod nano, Leica D-Lux 2, & Palm Treo 700p
-
Last night, some of our systems installed updates released on 11/13/2014. KB3021674 KB2901983 KB3023266 KB3014029 KB3022777 KB3020388 KB890830 Today, all of the servers running Windows Server 2008 R2 started logging the following error in the Secur