Cannot re-add deleted Header row to tablix in SSRS 2012?

Hello, I am stuck on this seeminly small issue. I am using SSRS 2012 RC0 in Visual Studio 2010 sp1 to build this tabular report. I had inadvertantly removed the initial header row from my tablix before adding numerous nested groupings to move the column
headers to the header section so they would show up on each page. I would like to reverse that decision, but I seem to be unable to now re-add that header row back to my tablix. In older versions of SSRS, I was able to right click on the table and then click
on insert row-->Header row but that does not seem to be possible in ssrs 2012.. I tried adding a outer row to my top most grouping, but that option was grayed out.
Please advise how I can add my header row back to my table.
thanks!

Hi chenthorn,
In your case, could you please post a screenshot about your report design structure to us for further investigation? Generally, we can right-click on the “details” row and then select “Insert Row->Outside Group - Above” to get the table header.
Otherwise, SQL Server 2012 RTM available for download. Please see:
Microsoft® SQL Server® 2012 Evaluation:
http://www.microsoft.com/en-us/download/details.aspx?id=29066
TechNet Subscriber Support
If you are TechNet Subscription user and have
any feedback on our support quality, please send your feedback here.
Thanks,
Bin Long
TechNet Community Support
Hi this does work, but just like any other row added outside the group in the table, it doesnot have the properties of a header, it cannot repeat on every page/pagebreak.Is there any other way the deleted header can be added back?
Regards
Prasanth
Is the header row 'special' or is it just another row?

Similar Messages

To add/delete the rows in ALV report outpout

Hi,
Is there any way by which we can add/delete the rows in ALV report output.
Thanks
Ankul

Hi,
Try out this way:
data: i_modified TYPE STANDARD TABLE OF mara,"For getting modified rows
        w_modified TYPE mara.
CASE e_ucomm.
      WHEN 'EDIT'.
      perform save_database.
      CALL METHOD ref_GRID->REFRESH_TABLE_DISPLAY.
    ENDCASE.
FORM SAVE_DATABASE .
data: i_selected_rows TYPE lvc_t_row,                "Selected Rows
      w_selected_rows TYPE lvc_s_row.
* Getting the selected rows index
    CALL METHOD ref_grid->get_selected_rows
                IMPORTING et_index_rows = i_selected_rows.
* Through the index capturing the values of selected rows
    LOOP AT i_selected_rows INTO w_selected_rows.
    READ TABLE it_tab INTO wa_it_tab INDEX w_selected_rows-index.
    IF sy-subrc EQ 0.
      MOVE-CORRESPONDING wa_it_tab TO w_modified.
      APPEND w_modified TO i_modified.
    ENDIF.
ENDLOOP.
MODIFY mara FROM TABLE i_modified.
Thanks,
Krishna

Add / Delete a row in a table without using a button

Hi,
I was just wondering if it was possible to remove or add a row in a table without using the button? I noticed that in all examples, it always involve putting code in the button click event but I wanted to add or delete a row in a table based on the fact if the row contains a certain value or not. Is that possible?
Much appreciated,
Vincent

Vincent,
Here is the updated file..
https://acrobat.com/#d=bVDBNM0pnS2IpfE58V01Tg
You have checked the checkbox "Repeat subform for each Row" for Header Row under IndTable1. You need to do at Row1 level of Table1.
I bound the Row1 of Table1 to <Row1> tag in your XML which can repeat multiple times.
I wrote the code in the Doc Ready event of the Test1 field to check whether the value is existing or not. If it does not have a value, then I am removing the instance of the Row1 by passing the current index.. (You can check the code)..
While creating a data connection using XML you need to make sure that the below structure is repeated atleast 2 times. And while previewing you can use make a copy of this same XML and remove Row1.
<Row1>
<Test1>Individual Name 1</Test1>
</Row1>
Thanks
Srini

How to add/delete rows on the form without saving data

I am new to apex
I am working on project and need some help on creating a form
my requirment is to save a request that has multiple questions.
i have a request form with multiple regions
On one of the region that takes questions, I want to create a tabular form such that i can add/delete/update row without hitting database and enter multiple questions
each row is one question.
Apex has the default functionality of having a tabular form linked to a table that onload shows the data from that table and also on click of add or delete hits the data base to save the data.
However i want to load a form that does not show any data if its a new request and click of add/delete should not update the databse. It should just add/delete a row on the form
so user logs in and can create a request that has multiple questions
finally want to submit the form and save all the information of the form in multiple tables.
As of now i a m able to have a simple form and a process that save 1 question per request.
How do i achieve this. Please assist.

Do that using collections like in this example:
http://apex.oracle.com/pls/otn/f?p=31517:176
Once you are done, you may decide either to save that or to clean it up.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
------------------------------------------------------------------------------

Create header row or col from normal cells?

when importing old excel tables it would make life much easier if there was a possibility to convert an existing row to a header row or an exisiting column to a header column. Unfortunately i can't find anything like it. Is there something which i did not see?

Welcome to Apple Discussions
A similar question came up just yesterday in the Pages forum. Here is what I wrote in reply:
I can't figure out if a row can be converted to a header row, similar to locking title position in AppleWorks, in either Pages or Numbers. Locked title position in an AppleWorks spreadsheet is not recognized as a header row in Numbers (must go leave feedback on that one - done, & added the bit about converting to a header row/column). I could, though, add the header row & then drag the first row into the header row & delete the now empty first row. Because copying the text also copied the filler color, I used the fill color option in the object inspector to color the cells in that row.

How do you freeze the tablix header row in an Excel export file in SSRS 2008?

So this is totally killing me.
I've found out how to make a tablix header row repeat on each page of a PDF export file in SSRS 2008 (which I won't even get started on because all I can say is that 2005 is way better), but I cannot figure out how to make a simple header row of a tablix
freeze in an Excel export file. The tablix is right at the top of the body and spans the entire width of the design area. How in the world do you get it to freeze in the Excel export file?

Rashiki777,
From your information, I get that you want to freeze the tablix header when view the report in Excel. Please follows
these steps:
Click
the header row
Click
View menu on top of the toolbar, then you will Freeze Panes
Select one kind of Freeze based on your requirement.
This link supplies the detailed steps
http://inpics.net/tutorials/excel2007/vis5.html If you have any concern, please feel free to ask.
Of course,
you could utilize the list control to display a certain rows on one sheet, then every sheet in Excel will have one header, the steps are following:
Drag a list into report body, right-click
Details in Row Groups panel to select Group Properties….
Click
Add button, then type in expression =ceiling(RowNumber(nothing)/25)
in the textbox Note: 25 is just 25 rows per page, you could reset this value based on your requirement.
Drag the table control into this list control.
If you want to display every page in every sheet, you could add a page break to the table control in the list.
Best regards,
Challen Fu

Repeated Header Row within a Details Section Only of a Group Ignores Tablix Member Properties

Ok. I have a situation where I have a details section of a group, and I am trying to get it to repeat the row headers on each page. It's not working. I've gone into Advanced Mode, and addressed the static Tablix Member for the left-most
field of the header row in question, set the properties for the Tablix Member to "RepeatOnNewPage: True" and "KeepWithGroup: After", and still, it refuses to repeat the row header for these details. I've tried rebuilding and
not deleting the column where the grouping was originally assigned (without deleting the grouping, of course), and assigned the properties for "RepeatOnNewPage" to that left-most, grouping field, yet I get the exact same results. I've looked
up solutions, and even spoken to the expert of experts, but no joy here. I'm using VS'10.

OK. So it is fixed... sort of...
Apparently, you must select to add group headers repeated as you create the group (inc. child group), BESIDES changing in Advanced Mode, Tablix Member /Properties / etc. Then you have to format that extra column within your Tablix to
make it appear to 'disappear'. BUT EVEN THEN, there is a new problem:
The headers will repeat on the additional pages, but only to a point. For some odd reason, SSRS doesn't consistently render the repeated headers of the group details for
every page, just where it is a hard (page) break, as opposed to a soft (page) break. My gut tells me that this has nothing to do with the .xml code, but is an SSRS idiosyncrasy.

Add and Delete a row in table

Hi Expert,
In SAP interactive form OFFLINE Scneario.
I have a deep structure. In which i am using other structures like kna1, knb1, knvv.
Now in KNVV is again a deep structure in which i have a table type.
Now a draged and droped this table type to my layout so i got a table.
I Need to have two buttons ADD and Delete, To add and delete a row in table repectvily.
I saw other threads also but get not do it.
My table type attribute's name in KNVV structure is VLACT.
I write following code on click action of ADD button
data.#subform[0].Button1::click: - (FormCalc, client) -
VLACT.row.instanceManager.addInstance(1);
xfa.form.recalculate(1);
but it shows error msg
accessor "VLACT.row.instanceManager.addInstance(1);"
is unknown.
Also i am not able to see tabel itself wich i draged and droped. Only two buttons are there.
Plz help
Thanks ? Regards,
Arvind

Hi Otto,
This is the code i am using to add new row.
Also all the settings in form are correct like "Repeat row for each data item" etc.
I want to have at most 7 rows.
var nTableLength = Table1.nodes.length;
var nNumRow = 0;
    for (var nCount = 0; nCount < nTableLength; nCount ++)
      if ((Table1.nodes.item(nCount).className == "subform") & (Table1.nodes.item(nCount).name !== "HeaderRow"))
       { nNumRow = nNumRow + 1; }
           if (nNumRow == 7)
           { xfa.host.messageBox("The maximum allowable number of rows is 7. You cannot add any more rows.", "Warning", 3); }
       else {
              Table1.Row1.instanceManager.addInstance(1);
              xfa.form.recalculate(1);
               xfa.host.messageBox("row added" );
I get the msg form the statment        xfa.host.messageBox("row added" );
But i can not see the newly added row
Plz help
Thansks & Regards,
Arvind

Co-author cannot access track change and add/delete scenes

My co-author cannot access track change or add/delete scenes. Is it a bug or is there a setting that I did not set correctly. I shared the document as co-author several times with the same results. Any help would be appreciated Thank you Brice

Hi there,
Unfortunately, currently only owner of the document has the right to turn on/off track changes or accept/reject changes. Co-author can still view the document as Original or Final from Review menu or even navigate through the changes using Next Change/Previous Change. Extending the track changes rights to co-author as well is being considered on our backlog of items to do.
Meanwhile, the co-author should still be able to go ahead and edit existing text, add new text, delete existing text and it should be getting tracked.
Do keep providing us your feedback on the track changes feature. Your feedback is extremely important to us and helps us to improve.
Thanks
Adobe Story Team

How to Add and delete a row while using Abstract Table Model

Hi,
I need to do the following functionalities in JTable.I've done tht but a small problem.
1. Adding a row (Using addRow() method from DefaultTableModel).
2. Deleting a row(Using setRowCount() method from Default Table Model).
3. Sorting the table based on the selection of column(Using TableSorter which is using AbstracTableModel).
As the sorting is mandatory i've to change my model to Abtract Table Model
The problem is this Abstract Table Model doesn't have any methods to Add a row or deleting a row (setRowCount()).If anybody has written any utility method for this using Abstract Table Model help me.

Using TableSorter which is using AbstracTableModel).If your talking about the TableSorter class from the Swing tutorial, then you create the TableSorter class by passing it a TableModel. There is no reason you can't use the DefaltTableModel.
I changed the code in TableSorterDemo as follows:
        String[] columnNames = {"First Name",
                                        "Last Name",
                                        "Sport",
                                        "# of Years",
                                        "Vegetarian"};
        Object[][] data = {
            {"Mary", "Campione",
             "Snowboarding", new BigDecimal(1), new Boolean(false)},
            {"Alison", "Huml",
             "Rowing", new BigDecimal(3), new Boolean(true)},
            {"Kathy", "Walrath",
             "Knitting", new BigDecimal(2), new Boolean(false)},
            {"Sharon", "Zakhour",
             "Speed reading", new BigDecimal(20), new Boolean(true)},
            {"Philip", "Milne",
             "Pool", new BigDecimal(10), new Boolean(false)}
          DefaultTableModel model = new DefaultTableModel(data, columnNames)
               public Class getColumnClass(int c)
                    return getValueAt(0, c).getClass();
        TableSorter sorter = new TableSorter(model);
//        TableSorter sorter = new TableSorter(new MyTableModel()); //ADDED THIS

I created a repeating table but want to add a "do you really want to delete this row" prompt.

Let me clarify, I created a repeating table which allows users in Adobe Reader to add or delete rows. However, if user inadvertently hits delete, the row and any data is lost with no way to undo. So, I'd like to either add a pop up prompt for user to confirm they want to execute action or create an undu option somewehre else on the form. Can this be done?
Message was edited by: deanotn

Yes you can do it using app.alert().
var nButton = app.alert({
cMsg: "Warning: This will delete the row and all data in it. \n\nDo you want to continue?",
cTitle: "Delete Row",
nIcon: 1, nType: 2
if (nButton == 4) {
deletion code here
Description of app.alert() options:
http://acrobatusers.com/tutorials/popup_windows_part1

Add/delete row in JTable

I went through the tutorial of JDK about how to programming JTable, i can NOT find a way to add/delete row into/from JTable.
I immagine it would be a difficult task because the data set it takes 'Object data[][]' is NOT dynamically grow/shrinkble.
Can we make it take ArrayList[] as input dataset so that the dataset can dynamically grow/shrink?
Any other way around to add/delete row?
THANKS for your consideration.

You have to write your own TableModel like extending AbstractTableModel. In that class add custom methods to add and remove rows. From those methods call fireTableRowsDeleted(..) and fireTableRowsInserted(..) to update UI.

To delete a row created through "Add Another Row" in OA Framework

Hi All,
I am using Add another Row concept in one of OA page.
The fields in row are mandatory.
So if user cliaks on add another ro, so new row gets added, but suppose he doesnt enter any data then it gives error on submit button, saying"fileds are mandatory".
Is there anyway by which user can delete the row created by "Add another Row".
Thanks in advance

Hi Tapash..
Actually I want to remove the row where user has not entered any data.
As the some of the fields are mandatory, so when user clicks on submit button, it throws error that please enter values for mnadtory fields. I want to remove this validation for the row where user has not entered any data.
Thanks

My add/delete row function is unselectable. How do I fix this?

For no reason that I can guess I am unable to add or delete rows. That little circle icon with the two horizontal dashes is gone and when I click on a numbered row the 'add/delete row' choices are grayed out, unelectable. My spreadsheet needs are VERY basic so I'm at a loss for what has happened because I've been using this file. It WAS working like it should, but now it's not and I don't know if I clicked something OFF or what. I am not new to a Mac, so I'm not a newbie with this stuff. Any ideas??????

Try deactivating any filter you have set on the table.
SG

Add/Delete row

Hello,
How can add a new row directly after the current row not at the end of the form?
For example: User fills the question/answer form and they want to add new row(s) to ones that already added. Suppose that they are at question 1, 2, 3 but realize that they want to add a new row between row#1 & 2 or row# 2 & 3 which can re-number to reflect the new row to the right number instead of at the end after row#3.
Can any one please advise.
Thanks,
Han

Hi Han,
Check out this example: http://assure.ly/gk8Q7a.
In particular Tables 5 (uses Tables) and 6 (uses Subforms). Basically I have set up the index cell as a button. When clicked it will "add" a new row directly underneath the row clicked.
The script is in fact doing two things, one directly after the other.
It adds a new row at the end of the table, and
Then it moves that new row based on the index of that new instance.
Does that make sense?
Niall

Cannot re-add deleted Header row to tablix in SSRS 2012?

Similar Messages

Maybe you are looking for