Cannot register

I just got evil patch 119108-03 pushed on me.
Now, in order to get patches (currently have base Soalris 10 x64 installed with just a few patches)
I seem to need to register server. However, all I get
is a dialog box stating "Cannot collect required system information" and nothing else.
How is one supposed to get any patches now after
July 25th ?????????
I then thought there could be something wrong with
119108-03 so I removed the patch and downloaded
and installed the complete updateconnection package from the Sun Store. Same result.

Found the probleme here.
I had a moderately complex network configuration
consisting of 2 bge interfaces, 2 VLAN interfaces on top of that, and running IPMP on all 4 four interfaces
to create two subnetworks with dual IP paths.
The updatemanager could not parse the output of
ifconfig -a and thought I did not have any network
interfaces at all. I temporarily re-configured with a
single interface and then the Registration Wizard
completed without any errors.

Similar Messages

I am trying to finish a book in InDesign CS2 with another person. My old XP computer became unstable and I had to get a Windows 7 computer. I was able to install CS2 on the Virtual XP Machine on my Windows 7 computer, but I cannot register or activate it.

I am trying to finish a book in InDesign CS2 with another person. My old XP computer became unstable and I had to get a Windows 7 computer. I was able to install CS2 on the Virtual XP Machine on my Windows 7 computer, but I cannot register or activate it. Adobe no longer supports activation. Is there a way I can keep using CS2? I need to get files back and forth to my coauthor. I also have CS6. I understand that files can go form 2 to 6, but not backwards. Thanks Robert

you can download a new installer and serial number from Adobe at Adobe - CS2 Downloads

Cannot register my CC and I do not know why

I cannot register my CC to purchase. There is no problem with information, what to do?

What do you mean you cant delete? Are they still in your contact app or they come up when you text or call them?

Hello - I live in the UAE and my itunes account is regsitered here. Unfortunately the choice of music is not as good as when my account was registered in the UK. I cannot register my account in the UK as my bank details are all in the UAE now. HELP!

Hello - I live in the UAE and my itunes account is regsitered here. Unfortunately the choice of music is not as good as when my account was registered in the UK. I cannot register my account in the UK as my bank details are all in the UAE now. HELP!

Sorry, but no help is possible. You can only use the UAE iTunes Store, and Apple can only offer what content they are able to license for sale in that country. You'll have to look elsewhere for content. Whether there are any other download stores able to sell in the UAE I don't know. You may need to purchased CDs and import them into iTunes.
Regards.

Seeburger EDI Adapter Deployment Error: Cannot register EarLoader

Hello,
we currently have updated our SAP Netweaver Development Environment 2004s to SP20. This installation runs on IBM iSeries.
We also have to deploy a Seeburger EDI Adapter (Version 1.8) but we faced following error in the deployment:
---snipped
PM Error: Aborted: development component
'SeeFunctionsEar'/'seeburger.com'/'SEEBURGER
AG'/'20090701183537.1.8.1'/'1', grouped by software component
'SeeXIExtendedTools'/'seeburger.com'/'LOCAL'/'20090701183537.1.8.1''/'1':
Caught exception during application deployment from SAP J2EE Engine's
deploy service:
java.rmi.RemoteException: Cannot register EarLoader for application
seeburger.com/SeeFunctionsEar..
Reason: null; nested exception is:
java.lang.NullPointerException
(message ID:
com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
---snipped
We've deployed not only with the JSPM but also with developer Studio. (The SDM-Tool has a big problem after upgrating to SP20 - SAP knows the error and with the next SP this will be fixed. So this tool cannot be used!)
First of all, I think it is very useful for us to know what is the EarLoader but unfortunately we can't find any information on the sap help, documentation or here in the SDN. Neither on the Web .....
Could someone explain the issue to me, please?
Thanks in advance.
Christian Sperlich

Hi,
1)Can you check your class path, whether it is configured correctly
2)Check whether you have included the latest class file while importing
3)Check whether you have activated the objects after you have made changes are imported
Regards
Agasthuri Doss

Bug in 10.1.3 production: Cannot register Custom ViewCriteriaAdapter

Hi
I think there is a bug in JDeveloper 10.1.3 production. I cannot register a custom ViewCriteriaAdapter (see also Thread BUG in 10.1.3 EA: Can't register custom ViewCriteriaAdapter
This is my code:
public class myAdapter implements ViewCriteriaAdapter
public String getViewCriteriaClause(ViewObject viewobject, ViewCriteria viewcriteria)
    System.out.println("***** \"myAdapter\" successfully called ***** ");
    return "My ViewCriteria Clause";
public class tester
public static void main(String[] args)
    System.out.println("Check if you see a line which states that, that myAdapter was successfully called:");
    AppModuleImpl module = (AppModuleImpl) Configuration.createRootApplicationModule("project1.AppModule", "AppModuleLocal");
    ViewObjectImpl vo = module.getArticlesView1();
    vo.setViewCriteriaAdapter(new myAdapter());
    ViewCriteria vc = vo.createViewCriteria();
    ViewCriteriaRow vcRow = vc.createViewCriteriaRow();
    vcRow.setAttribute("ArticleNo", "like 'DV%'");
    vc.addElement(vcRow);
    vo.applyViewCriteria(vc);
    vo.executeQuery();
    System.out.println("You didn't see such a line? This means 'myAdapter' has not been called, which is a bug!");
}

Some investigations discovered that the problem seems to be, that method "applyViewCriteria" in ViewObjectImpl resets the Custom ViewCriteriaAdapter.
So the problem seems to be solved if you override ViewObjectImpl.applyViewCriteria() like this:
    public void applyViewCriteria(ViewCriteria viewcriteria)
      super.applyViewCriteria(viewcriteria);
      setViewCriteriaAdapter(new myAdapter());
    }Another workaround is to set property "jbo.ViewCriteriaAdapter" to "project1.myAdapter" in the Configuration of all ApplicationModules (or at least in the one which is first instantiated).
Hope this helps.
Frank Brandstetter

I downloaded photoshop elements 13 and cannot register it.

I downloaded photoshop elements 13 and cannot register it or find a code. I received no email. I have followed all the various instructions with no luck. What can I do?

Photoshop Elements is not part of the Cloud, I will move this to that forum
Photoshop Elements Forum http://forums.adobe.com/community/photoshop_elements
Select a topic, then click I STILL NEED HELP to activate Photoshop Elements Online chat
-http://helpx.adobe.com/contact.html?product=photoshop-elements or
http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-installation-photoshop-elements- premiere.html

Cannot register Adobe XI Pro

Hi All,
I cannot register Adobe XI Pro and getting error message 'Please connect to the internet and retry' while registering product.

Moved to Acrobat Installation & Update Issues

I have PSE7 on my old computer and I have the license key (but not the serial number). Cannot register it on my new computer - I get a message saying that number is invalid. What can I do?

I have PSE7 on my old computer and I have the license key (but not the serial number). Cannot register it on my new computer - I get a message saying that number is invalid. What can I do?

It does not magically appear in a new place. It will only be where you put it.
Copy everything from your old computer, or your backup copy of your old computer, to your new one.

Ap 1231G cannot register to WLC

Hi friends:
my wlc version is 7.2.115.2.
ap 1231G version is c1200-rcvk9w8-tar.124-21a.JA2
the ap cannot register to WLC.
the lap is used stats ip address,its can pinged to wlc.
Version does not support?
and the other ap is 1241 version is 12.4<13d>JA.its can register to wlc
only this 1231G can not register.
this picture is my WLC ap join stats detail.
Thanks
cena

HI Cena,
This error message means that the controller received a discovery request through a broadcast IP address that has a source IP address (given), which is not in any configured subnets on the controller. It also means that the controller dropped the packet. This typically happens when the u trunks all allowed VLANs instead of restricted them to wireless VLANs.
Please allow only specific vlans.
Complete these steps in order to resolve this problem:
1.If the controller is on another subnet, the APs must be primed for the controller IP address, or the APs must receive the controllers IP address using any one of the discovery methods.
2.The switch is configured to allow some VLANs that are not on the controller. Restrict the allowed VLANs on the trunks.
Regards
Dont forget to rate helpful posts.

My desktop fried in a power surge--- I bought a new one---I cannot register my CS2 even though I have the activation code

My desktop fried in a power surge--- I bought a new one---I cannot register my CS2 even though I have the activation code

Awesome! You're welcome!
Well, I'm not exactly sure. I suppose they may know if you have or have not purchased it since you are probably signed in...Or they figure it's an old enough program, and few enough people know about the serial number, that they don't care too much.
Benjamin

Cannot register iPod - help!

i got an iTouch for my birthday, and i tried to connect it to my computer. It gives me the option to register it, but i can't find the button to register it. i only see a button that says 'register later.' it starts to cut off the words, like if there was a scroll bar to move to the right, i dont see it. its definately not there. i have an old iPod, which is connected to another computer in my house. that computer is way old and i dont think the iTunes library will let me buy any more songs because i'm unable to upgrade to another level of iTunes. but thats not the problem i'm having.
i would like to register and start using my iTouch sometime soon, but i cannot register it.
please help!
thank you

i've had a long day of school and practice and i'm going to sound like a complete idiot when i ask you this.. where is the control panel?
haha i'm really sorry
i know i've seen it before, i just cant find it

Cannot register my copy of CS6

I purchased Creative Suite 6 from an Adobe authorized reseller. The software is working, but I cannot register CS6 on the Adobe Site. The message says: You cannot register your software because your serial number come from a volume licensing program. Is it legit for a reseller to sell copies from volume licensing program?

You'll have to inquire with sales support for the specifics...
Mylenium

SAP CRM - Genesys: ICI: Cannot register phone line

Hi,
I am working on SAP CRM to Genesys integration over ICI and I am stuck at the first step. We have Genesys setup and I have followed SAP instruction on configuring SAP CRM in site /people/john.burton/blog/2009/11/11/how-to-implement-computer-telephony-integration-cti-with-the-sap-crm-interaction-center
However I get the following error as seen on ICI trace.
Exception CX_CRM_MCM_EXCEPTION
Exception text General error in the multichannel layer
Message class CRM_IC_APPL_UI_CHMSG
message number 551
message Cannot register phone line
Program name CL_CRM_MCM_SESSION============CP
Include name CL_CRM_MCM_SESSION============CM01P
row number 78
The ICI trace error is
<?xml version="1.0" encoding="UTF-8" ?>
- <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
- <SOAP-ENV:Body>
- <SOAP-ENV:Fault>
<faultcode>Server</faultcode>
<faultstring>fault. see details</faultstring>
- <detail>
- <IciErrorCodes>
<areaCode>2</areaCode>
<errorCode>15</errorCode>
<errorText>1 is not available</errorText>
<errorRetry>false</errorRetry>
</IciErrorCodes>
</detail>
</SOAP-ENV:Fault>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
Has anyone come across this issue and what would the possibel issue be?
Best Regards
Loy
Edited by: Loy Pereira on Jul 19, 2010 10:29 PM

HI,
We resolved the issue. It was Genesys config. It was defined as user defined seating instead of free seating.
Regards
Loy
Edited by: Loy Pereira on Jul 20, 2010 11:49 AM

Error 1904 "Cannot register ExportSDK.dll" when installing BOXI

When installing BO Entreprise XI Release 2 on my PC WXP SP2, had 2 error messages 1904 "Cannot register dll" on :
- ExportSDK.dll
- importent6.dll
I had to ignore both errors to complete install.
Although BOXI seams to work fine, should I fix the error and how to ?
Marc

Hi Marc,
Could you please review the following information it might help you to resolve the issue.
Hi Chris,
This is with reference to the information provided by you.
Could you please test the following solutions to resolve the issue?
Solution1:
1. Log in as u2018Computer Administratoru2019.
2. Make sure that no anti-virus program or spy ware is running on your machine.
3. Copy and paste all the installation files of BOXI to your local drive of your machine.
4. Start the installation by running the setup file from your local machine.
5. Click ignore to all the 1904 errors you get while installing and it should finish the install process
6. Once the install is complete, go to the Control Panel -> Add/Remove Programs and reinstall BOXI.
7. The installation the second time should register those dlls without error
8. After successful installation, restart your machine.
9. Open BOXIR2 and let me know what happens
If the above mentioned solution doesnu2019t works then could you please apply the following solution?
Solution2:
You need to disable the DEP option for all services and programs other than those needed by the Operating System, before installing the product.
To disable DEP:
1) Go to Start > Settings > Control Panel > System > Advanced tab > Settings button > Data Execution Prevention tab.
2) Select the top radio button and restart the system for changes to take effect.
3) Upon completing these steps, you can now successfully install the product.
Solution3:
Sometimes we fail to register the .DLL using REGSVR32 because in the system there is the alias copy of these DLLs. Therefore, could you please check the system folders that is there any alias .DLLs are present for ExportSDK.dll and Import6.dll if there is any such .DLLs could you please remove the dlls and try to register again.
In case of queries please do revert we will be glad to help you.
Regards,
Sarbhjeet Kaur

Acrobat pro 8 cannot register

My Adobe Acrobat Pro 8 cannot register. Any help?

What operating system (OS) and was there any problem with the install? What error messages if any are you getting that has led to your discussion topic?

Cannot register

Similar Messages

Maybe you are looking for