Cannot Remove Business System

Hi,
I had created a Business System (BS_ABC_200) for different technical landscape for which we had assigned Client number 200 and logical client name also. After that the Business System was deleted by accident. Then i even deleted the technical system and created the technical system and also new Business System with different name.
Now, when i assign the new Business System in Configuration time, the Business System cannot be activated. The Error is "SAP System Id and Client name already existing with the service BS_ABC_200". Even though i had deleted in SLD.
If i create the Business system with same name "BS_ABC_200" then while assigning in configuration time i wont be able to see that Business System in the list.
How to overcome this issue, how can i delete BS_ABC_200 completely. Is there any runtime cache where i need to delete it.
Thanks,
Ramesh P

Hi,
In general , that to be you are facing this type of problem only inthis situation , then you have to refresh SLD cache.
See the below link
/people/sravya.talanki2/blog/2005/12/02/sxicache--ripped-off - SXI_CACHE
XI Runtime cache error: Cache contents are obsolete
Cache Refresh - SAI_CACHE_REFRESH
/people/sravya.talanki2/blog/2005/11/03/cache-refresh-errors--new-phenomena
Regards
Chilla

Similar Messages

How to Remove Business System From SLD

Hi Experts,
I Created Business System For Web As ABAP.
While Removing Business System From SLD Means I am Getting the Following Error.
java.lang.NullPointerException at com.sap.sld.wd.businesssystem.BusinessSystem.removeXIIntegrationServer(BusinessSystem.java:497) at com.sap.sld.wd.businesssystem.wdp.InternalBusinessSystem.removeXIIntegrationServer(InternalBusinessSystem.java:474) at com.sap.sld.wd.businesssystem.BusinessSystemMainView.RemoveOk(BusinessSystemMainView.java:450) at com.sap.sld.wd.businesssystem.wdp.InternalBusinessSystemMainView.wdInvokeEventHandler(InternalBusinessSystemMainView.java:477) at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87) at com.sap.tc.webdynpro.clientserver.event.CustomEventProcessor.handleServerEvent(CustomEventProcessor.java:45) at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleServiceEvent(WindowPhaseModel.java:362) at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:129) at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:344) at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processPhaseLoop(WebDynproWindow.java:355) at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:152) at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:298) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:705) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:659) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:227) at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:150) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:56) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:47) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Please Let me know How to Remove it from SLD.
Regards
Khanna

HI Khanna
Delete the Business System in your IR and ID, if any interfaces are developed under this BS.
See if any items in locked state...and also after deleting it...activate it and refresh the cache. this shud help
If you deleted from everywhere then it should not give that message.
Try after refresh cache using SXI_CACHE.
Finally Delete the BS from SLD
In general , that to be you are facing this type of problem only inthis situation , then you have to refresh SLD cache.
See the below link
/people/sravya.talanki2/blog/2005/12/02/sxicache--ripped-off - SXI_CACHE
XI Runtime cache error: Cache contents are obsolete
Cache Refresh - SAI_CACHE_REFRESH
/people/sravya.talanki2/blog/2005/11/03/cache-refresh-errors--new-phenomena
Cheers..
Vasu
<i>** Reward Points if found useful **</i>

Cannot see business system in integration directory.

Hi all,
I am trying to configure a simple file to idoc scenario (from the starter pack) . I have created a third party technical system and assigned it to a business system.
I have configured the scenario as given in the exercise scenario in the integration repository.
In the Integration directory, i create a new configuration scenario . Now i go into the service without party , and try to assign a business system . However, here , in the list of business systems available from the SLD, i cannot see my business system . Could anybody help me find out why this is happening ?
p.s. while creating the technical system , i have given 'localhost' as host, since i didnt know what to give here and thats what most other technical systems in the SLD contained. could this be the problem ?
Thanks,
Joe.

Looks like the much abused points system is having a bad day on SDN
I am glad actually - will keep the spammers away
A Thank You is all that drives and should drive SDN
Regards
Bhavesh

How to share a business system

Hi experts,
I'm using "Configuration:Integration Builder(sappidev_PID_00)". I want to assign business system under "Service without party" in my scenarios.
In step 3, I need select a business system, but
You cannot use business systems that already exist as a business service as a business system service
, so I must create a new business system?
In the sap in our company,I found some scenarios are using the same business system.
Thanks.

Hi Mikenl,
To reuse the Business System, Right click and add the BS to the Scenario where you want to reuse it.
Regarding the client concept.. and Technical Systems....here it goes...
For each Business Systems we assign a Technical System.
When we create a TS we genarally make it as Third Party and can use this in many BS.
So Business System A and C both can be assigned the TS B.
There is no client that you need to create for third party TS.
For TS as ABAP we mention client which is the client number of the system that you are configuring.
Clients in SCC4 are created for different client logins in ABAP Stack of SAP PI and we generally never make any clients for Technical Systems.
For More details on Technical System check this link :
http://help.sap.com/saphelp_nwpi71/helpdata/EN/45/da96eae5806f74e10000000a1553f6/frameset.htm
For more info on Business Systems you can see:
http://help.sap.com/saphelp_nwpi71/helpdata/EN/45/da96eae5806f74e10000000a1553f6/frameset.htm
I hope this will help
Cheers
Dhwani

Cannot remove a record created by the system

dear experts, i m facing error " Cannot remove a record created by the system]" while deleting tax group.
regards
awais

That is system functionality in SP01, there is an input & an output code that you now cannot delete

Cannot Remove Failed 2 Site System Servers

Good Afternoon All -
While setting up a fairly new SCCM (2012 Sp1 CU1) environment, there were a few things that were not done correctly. I recently started and am trying to get them figured out. I have two site servers which I cannot remove from SCCM. Below
is their status as well as what I've tried...
Site Server Issue #1
Site Code L56 - The server was a secondary server but for whatever reason has been taken offline and no longer exists without performing an uninstall first. It is listed in SCCM Sites as "Deleting"
After research, I opened regedit, and browsed to HKML\SOFTWARE\Microsoft\SMS\Components\SMS_COMPONENT_MANAGER where i saw a key with the site server's name in it. I changed the value "Deinstallation Start Time" to "1" in the key
as well as sub keys (2 more values) using
these instructions. I restarted the SMS_COMPONENT service, and then loaded up the console, but it was still there. Back in the registry, though, the key was completely gone.
I also tried to use preinst.exe. When I run the string "preinst /delsite L56", I get "Cannot find site [L56] in the site control data in the database. Checking in ServerData in the database." What gives?
Site Server Issue #2
There was a site server which was a secondary site - however - it wasn't working correctly and we were on a dead line so this past weekend i uninstalled it as a secondary site, verified / installed pre-reqs, then simply deployed a distribution point and
management point role to it.
Now, I'm trying to turn it back into a secondary site which is installed properly. I deleted the site roles which I could (seemingly successfully as the DP shares and services are gone from the server.) In the console, I go to delete the site server,
itself, but get the error saying it cannot be deleted because it contains site system roles (and lists Component Manager.)
I thought to try preinst.exe for this one also, but it has the same Site Code as our Primary Site Server.
Both servers are running Windows Server 2012 & SQL 2012.
Any Ideas? Thanks!
Ben K.

Similar Issue. Have a child site that is showing "Deleting" in the SCCM console. Used preinst.exe, but it states:
"Cannot find site [S01] in the site control data in the database. Checking in ServerData in the database.[S01]
is not a known site."
How do I get rid of the child site in the SCCM console, and when I do, would it be safe to set up another child site with the same name and site?

Cannot see/find the standard IDOC/BAPI in imported Business system

Dear Friends ,
We have installed the PI 7.1 and registered the CRM 7.0 via RZ70 in SLD of PI as techincal system and created the business system as well . Then i have mapped to the corresponding product and SWCV.
But when i import the business system in ID , i couldn't find the standard(pre-delivered) sender and receiver interfaces ( like IDOC etc., ) .
Please provide your valuable inputs .

Rangarajan,
Have you added the correct SWCV to the BS and TS?
i think you have not linked the TS and the Product correctly .
Create a Product->for this product create a SWCV->go to technical system reference the
created product there->Go to BS and check select the TS created earlier.
after doing above step , refresh sld cache and check again.
Please refer this wiki post :
http://wiki.sdn.sap.com/wiki/display/XI/WorkingwithSystemLandscapeDirectory+(SLD)
Regards,
Srinivas

Cannot remove current currency

88 PL14
No Transactions in system (New System).
Changing the currencies in the system.
1. Added new currencies
2. Change all Account Currencies to All Currencies.
3. Change all business partner currencies to the new currency code.
4. Change Local and system currency to new currency.
5. Remove old currencies.
Error: When trying to remove the original local and system currency, I get an error: Cannot remove current currency
Business Partners and accounts are changed to the new currency.
Rebooted and tryed again. Same error.
Rebooted, created new superuser and tried again. Same error.
Created a test database based off this database, created transactions with no problems. The new local currency code is being used. Ran trial balance to verify.
Is there any where else in the system that attaches itself to the currency?

There were draft purchase orders created. Removed the draft purchase orders. Then the currency could be deleted.
How I found the tables with 'USD':
1. Created a stored procedure to search all columns in all tables of the database using the following
          http://vyaskn.tripod.com/search_all_columns_in_all_tables.htm (SQL7/SQL2000 query but works in SQL2008)
2. Execute the stored procedure EXEC SearchAllTables 'USD' to search all tables and columns for USD
3. Looked up tables in SDK help
4. Found there were draft purchase orders, in Business One:
        Purchasing A/P -> Purchasing Reports -> Document Draft Report
        Right click each row and select remove
5. With all drafts removed, opened the currency table and was able to remove the currency.
Looks like I am going to have to get after somebody for testing on the wrong database.

Logical system and business system

Hi experts, please help me with the below questions---
1) What is the diff between logical system and business system?
2)what is the difference between logical system(defined in R/3) and business system (defined in SLD) in idoc to file scenario.
3) Is it require to give the logical system name of the xi server(Which we define in idx1 port) to the 3rd party system(Application system at the FTP side) to carry out file to idoc scerario?

Hi,
Business System :
1. Business systems are logical systems, which function as senders or receivers within XI. Business systems can be SAP systems or third-party systems. Depending on the associated technical system.
2. Business Systems should be mandatory used when dealing with Idoc's and Proxies .
Business Service:
1. Business Service requires manual adding on Inbound and Outbound Interfaces, Business Systems do not.
2. Business Services are maintained across environments and so, their names cannot be changed. Business Systems names can be changed across environments by providing SLD level transport targets.
3.In the Business Services we cannot maintain the Group and Targets in SLD. For Ease in transporting your ID/Configuration objects Groups and Targets are used in SLD for Business Systems.
4.Business Service has no SLD Entries and No Assigned Products and SWCV's
Regards
Sangeetha

Downloaded Firefox 4--computer asks over and over to restart, Firefox will not load, cannot remove it!!

I received an update message after my system had installed the newest Firefox 3. something, approximately 4 days ago. (Today is 3/22, so about 3/17--18) The newest update , when started, took me to the Mozilla homepage, where It was suggested I download and comment on the new Firefox 4---I do not normally do this, but am so impressed with Firefox versus most others, that I did, now, I cannot open Firefox at all, the older version, 3. something, is not in my system, only 4, but my system/PC upon trying to open the new Firefox, prompts me over and over to restart the system, (which I have done 3 times) I figured I would then simply remove it, (Firefox 4) and either try it again, or re-install the newest 3. something---I cannot remove it, even using my anti-virus program to do so, it simply prompts over and over to restart, wether I try to open, remove, or access it in any way---I do not wish to use system restore, but that seems my only option, please help!!!

I had the same problem and the solution is quite simple:
- delete all data that has to do with Firefox and Mozilla
- Reinstall the new version Firefox 4
You have to make sure that everything is deleted and well yes you will lose your profile data but at least it works again without any problem.

How to determine the sender business system for ABAP client proxy

Hi All,
I have one doubt: when the client proxy sends the message to XI, how could i know what is the sender business system name for it?
Is it the logical system which is reflected in Technical System?
let's say if i have the ABAP system, the technical system is ECC, which has three clients: 001, 066 and 000.
And the client 001's logical system in ECCCLNT001 (all the client proxy is created in this client). In this case, the sender business system name is ECCCLNT001, am i right?
If no, please correct me.
Thanks in advance
Leo

Hi lawrence
When data is distributed between different systems, each system within a network has to be clearly identifiable. The u201Clogical systemu201D deals with this issue.
A logical system is an application system in which the applications work together on a common data basis. In SAP terms, the logical system is a client.
Since the logical system name is used to identify a system uniquely within the network, two systems cannot have the same name if they are connected to each other as BW systems or as source systems, or if there are plans to connect them in any way.
Although SAP does not recommend that you connect test systems to production systems, a test system can have the same name as a production system. This makes copying production systems to test systems a lot simpler.
You are only allowed to change the logical system name of a system if the system is not connected to any other systems, because changing the logical system name would render all the connections to other systems useless.
Logical system names must contain capital letters and numbers only. SAP recommends the following naming convention for logical system names: <System-ID>CLNT<Client>.
Regards
sandeep

Business System in XI not able to attach Receiver/Sender interfaces.

I understand the difference between Business System and a Business Service (as I can read sap help and the previous posts on this subject thankyou).
I have a 3rd Party Warehouse system (Manhattan).
I have defined this in the SLD and imported this into XI as a Business System. As that seemed like the correct way rather than simply just defining it as a Business Service.
I have used this in various configurations and it seems fine.
But check this out.
If in XI Configurator you go into the Business System it is not possible to attach Receiver and Sender Interfaces to it like you would for a Business Service. This means that everytime you want to use an Interface you have to do a search all instead of just being able to picking it up off the ones defined against the System (like you can for a Business Service).
This is a little annoying and I wonder if I am doing something wrong.

Hi,
So how do I assign my SWCV to a Technical System in the SLD?
While configuring technical system in sld it will ask about the details of product and its software component version.
Maybe these steps may help you.
Choose New Technical System.
The browser displays the screen Technical System Wizard in a separate window.
       2.      Select Third-Party, and then choose next.
       3.      Enter the system name and the host name of the system, and then choose Next.
The browser displays all the registered SAP product versions in the list Available Products.
       4.      Select the SAP products that are installed in the third-party system, and then choose Add.
On the lower part of the screen, the browser displays a list of all the software components that are contained in the selected products.
Repeat this step as many times as necessary until you have added all products.
To remove a product, select it in the list, and then choose Remove.
You can add more products to this system at a later stage.
       5.      Select the software components that are actually installed in the system.
       6.      Choose Finish.
The SLD server has now registered the new third-party system.
Regards,
Pradeep A.

Difference between Business system and Business service.

Hi All,
Can any one explain in detail difference between Business system and Business service.
As we commonly say, Business service is for those system which are not in our landscape.
Can any one explain in which particular scenarios we will go for Business Service.
Reg
Bapuraj

Hi Bapuraj,
Business System
Business system is a logical system, and there is an importance on physical existence of the system.Also SLD entry is required.
It is generally used for SAP applications, this is just a general prinicple followed but not mandatory.
Business Component(formerly Service)
You use a Business Component, when you do not have the System details of the the partner system to which you want to communicate. i.e. you have not configured the partner system in SLD.
Business Service is an Absract Unit with Sender and Receiver Interfaces,In this case you need to explicitly add the message interfaces while doing configuration in ID.
It is generally used for NON-SAP applications, this is just a general prinicple followed but not mandatory.
<REMOVED BY MODERATOR>
<LINKS CAN BE SEARCHED FOR BASIC QUESTIONS>
-santosh.
Edited by: Prateek Raj Srivastava on Jan 12, 2012 10:01 PM

Lucreate - Cannot make file systems for boot environment

Hello!
I'm trying to use LiveUpgrade to upgrade one "my" Sparc servers from Solaris 10 U5 to Solaris 10 U6. To do that, I first installed the patches listed on [Infodoc 72099|http://sunsolve.sun.com/search/document.do?assetkey=1-9-72099-1] and then installed SUNWlucfg, SUNWlur and SUNWluufrom the S10U6 sparc DVD iso. I then did:
--($ ~)-- time sudo env LC_ALL=C LANG=C PATH=/usr/bin:/bin:/sbin:/usr/sbin:$PATH lucreate -n S10U6_20081207 -m /:/dev/md/dsk/d200:ufs
Discovering physical storage devices
Discovering logical storage devices
Cross referencing storage devices with boot environment configurations
Determining types of file systems supported
Validating file system requests
Preparing logical storage devices
Preparing physical storage devices
Configuring physical storage devices
Configuring logical storage devices
Analyzing system configuration.
Comparing source boot environment <d100> file systems with the file
system(s) you specified for the new boot environment. Determining which
file systems should be in the new boot environment.
Updating boot environment description database on all BEs.
Searching /dev for possible boot environment filesystem devices
Updating system configuration files.
The device </dev/dsk/c1t1d0s0> is not a root device for any boot environment; cannot get BE ID.
Creating configuration for boot environment <S10U6_20081207>.
Source boot environment is <d100>.
Creating boot environment <S10U6_20081207>.
Creating file systems on boot environment <S10U6_20081207>.
Creating <ufs> file system for </> in zone <global> on </dev/md/dsk/d200>.
Mounting file systems for boot environment <S10U6_20081207>.
Calculating required sizes of file systems              for boot environment <S10U6_20081207>.
ERROR: Cannot make file systems for boot environment <S10U6_20081207>.So the problem is:
ERROR: Cannot make file systems for boot environment <S10U6_20081207>.
Well - why's that?
I can do a "newfs /dev/md/dsk/d200" just fine.
When I try to remove the incomplete S10U6_20081207 BE, I get yet another error :(
/bin/nawk: can't open file /etc/lu/ICF.2
Quellcodezeilennummer 1
Boot environment <S10U6_20081207> deleted.I get this error consistently (I ran the lucreate many times now).
lucreate used to work fine, "once upon a time", when I brought the system from S10U4 to S10U5.
Would anyone maybe have an idea about what's broken there?
--($ ~)-- LC_ALL=C metastat
d200: Mirror
    Submirror 0: d20
      State: Okay
    Pass: 1
    Read option: roundrobin (default)
    Write option: parallel (default)
    Size: 31458321 blocks (15 GB)
d20: Submirror of d200
    State: Okay
    Size: 31458321 blocks (15 GB)
    Stripe 0:
        Device     Start Block Dbase        State Reloc Hot Spare
        c1t1d0s0          0     No            Okay   Yes
d100: Mirror
    Submirror 0: d10
      State: Okay
    Pass: 1
    Read option: roundrobin (default)
    Write option: parallel (default)
    Size: 31458321 blocks (15 GB)
d10: Submirror of d100
    State: Okay
    Size: 31458321 blocks (15 GB)
    Stripe 0:
        Device     Start Block Dbase        State Reloc Hot Spare
        c1t0d0s0          0     No            Okay   Yes
d201: Mirror
    Submirror 0: d21
      State: Okay
    Submirror 1: d11
      State: Okay
    Pass: 1
    Read option: roundrobin (default)
    Write option: parallel (default)
    Size: 2097414 blocks (1.0 GB)
d21: Submirror of d201
    State: Okay
    Size: 2097414 blocks (1.0 GB)
    Stripe 0:
        Device     Start Block Dbase        State Reloc Hot Spare
        c1t1d0s1          0     No            Okay   Yes
d11: Submirror of d201
    State: Okay
    Size: 2097414 blocks (1.0 GB)
    Stripe 0:
        Device     Start Block Dbase        State Reloc Hot Spare
        c1t0d0s1          0     No            Okay   Yes
hsp001: is empty
Device Relocation Information:
Device   Reloc Device ID
c1t1d0   Yes    id1,sd@THITACHI_DK32EJ-36NC_____434N5641
c1t0d0   Yes    id1,sd@SSEAGATE_ST336607LSUN36G_3JA659W600007412LQFN
--($ ~)-- /bin/df -k | grep md
/dev/md/dsk/d100     15490539 10772770 4562864    71%    /Thanks,
Michael

Hello.
(sys01)root# devfsadm -Cv
(sys01)root# To be on the safe side, I even rebooted after having run devfsadm.
--($ ~)-- sudo env LC_ALL=C LANG=C lustatus
Boot Environment           Is       Active Active    Can    Copy
Name                       Complete Now    On Reboot Delete Status
d100                       yes      yes    yes       no     -
--($ ~)-- sudo env LC_ALL=C LANG=C lufslist d100
               boot environment name: d100
               This boot environment is currently active.
               This boot environment will be active on next system boot.
Filesystem              fstype    device size Mounted on          Mount Options
/dev/md/dsk/d100        ufs       16106660352 /                   logging
/dev/md/dsk/d201        swap       1073875968 -                   -In the rebooted system, I re-did the original lucreate:
<code>--($ ~)-- time sudo env LC_ALL=C LANG=C PATH=/usr/bin:/bin:/sbin:/usr/sbin:$PATH lucreate -n S10U6_20081207 -m /:/dev/md/dsk/d200:ufs</code>
Copying.
*{color:#ff0000}Excellent! It now works!{color}*
Thanks a lot,
Michael

SLD Export / import Technical and Business systems

Dear all,
I am new to SLD administration.
We have task to update the local SLD on the Production PI system PPI ( Target ) with the business systems ZEC, ZSC from the Production Master SLD on Production solution manager system
PSM ( source ) using Export/Import on the necessary technical and business systems.
Please confirm whether i am following correct steps :
Go to SLD Administration on PPI target system
ALL Instances
Instances by Class
Model
( which one of this option need to be selected , please let me know ?? )
Go to SLD Administration on PSM source system.
select Export button ->
Select business systems one by one and perform Export which will create .ZIP file
at local machine.
Go to SLD Administration on PPI target system
select Import button ->
Select Export ZIP file which created in previous steps from PSM and provide location from desktop
Start Import button ( only if you get Continue import option )
Please let me know if above procedure is correct for business systems
if yes then what need to be done for Technical system ??...do they require Export/import also ?
If yes when i go to technical system option i get Export option disabled...but same way when i go to
business systems option i get Export button enable and able to perform the export.
Do i need to only Export / Import business systems ?
Plese help me.
Regards,
RR

Manoj,
It seems entries are added manually .... should we remove and run Import for the same ...
or just try to overwrite .... in case of overwrite option ( as we have open OSS message ) SAP has suggested through OSS message that If you end up with problems when trying to overwrite, then the PPI SLD is broken and will have to be re-built because someone made a manual change to it and got the GUIDs out of synch with the master.
I do not understand if target system PPI SLD gets broken during overwriting operation as mentioned by SAP ... whats is the way / steps / procedure to Re-build SLD .
In rebuilt - process do i need to Import ( Export -> Export lines -> ALL ) the export backup created before start of this activity ? please let me know SLD rebuilt steps and about Remove - reimport issue.
Appreciate you time on this. thanks in advance.

Cannot Remove Business System

Similar Messages

Maybe you are looking for