Cannot run SpeakHere example

Hello,
I cannot get the SpeakHere example to run. If I compile it from download I get 'kAudioSessionCategory_RecordAudio' (5 other constant errors)) undeclared errors. Including the right headers dont work either, but manually putting in the constants work (ie. UInt32 sessionCategory = 'reca'; )
However then trying to build and run gives me a symbol not found for _AudioSessionSetActive.
Other example compile and run fine. What am I missing?
Thanks for any help.
Message was edited by: jozero
Message was edited by: jozero

Hi Franck,
you need a NetWeaver 04 SPS13 environment, then you will find it in the irj application path of thsi installation.
Best regards,
Thilo

Similar Messages

Cannot run SimpleSearchServlet example

Hi experts,
I try to compile the SimpleSearchServlet example, but I have a classpath problem. The compiler cannot find the "km.shared.ui.released_api.jar". Where can I find this library containing the class "com.sapportals.wcm.control.released.search.SearchQueryListBuilder ".
Thank you,
Franck

Hi Franck,
you need a NetWeaver 04 SPS13 environment, then you will find it in the irj application path of thsi installation.
Best regards,
Thilo

Cannot run Zenworks examples

Hello,
I wanted to try the examples of streamed application on this page.
But the applications do not works.
I installed Spoon plug-in and launch the website on IE8.
You'll find here the error message and the javascript errors
http://oi54.tinypic.com/beu9sx.jpg
http://oi56.tinypic.com/29zd2eq.jpg
Thanks in advance for your help.

I get the same jscript error but Firefox streams fine for me. If the Spoon Plugin is installed can you uninstall from Add Remove Programs and try again. I'll ask some one else in France to try (assuming that's where you are) to make sure this isn't related to language/location.
Thanks
Andy

Help Running The SpeakHere Example

Hi,
I'm a newbie to iphone development coming from world of windows, so apologies in advance if it's a dumb question. I'm trying to run the SpeakHere example but so far unable to do so. The program compiles and launches, but freezes when I click 'record'. I tried to debug, and it seems to crash at:
recorder->StartRecord(CFSTR("recordedFile.caf"));
At least it doesn't go past this line (there's no error). So far I checked that audio input works in another app (garage band), gave the speakhere's sandbox full permissions, made sure I have the latest version of the os and sdk, and now not too sure what to do. Any help greatly appriciated.

Problem Solved:
After discovering where to look for errors I found that the error was:
Error loading /Library/QuickTime/DivX Decoder.component...
The solution was to remove the decoder and encoder from the /Library/QuickTime folder.

REP-1401: 'no_daysformula':Fatal PL/SQL error occured. ora-06503: PL/SQL : Functio returned without value. REP-0619: You cannot run without a layout.

Hi everyone.
Can anyone tell me what is wrong in this code below?
Code:
function NO_DAYSFormula return Number is
begin
IF TO_CHAR(TO_DATE(:P_FR_DT, 'DD-MM-RRRR'), 'RRRR') =TO_CHAR(TO_DATE(:ACCT_OPN_DT, 'DD-MM-RRRR'), 'RRRR')
AND :P_TO_DT<:MATURITY_DATE
AND :ACCT_OPN_DT>:P_FR_DT
THEN RETURN (:P_TO_DT-:ACCT_OPN_DT+1);
ELSIF TO_CHAR(TO_DATE(:P_FR_DT, 'DD-MM-RRRR'), 'RRRR') =TO_CHAR(TO_DATE(:ACCT_OPN_DT, 'DD-MM-RRRR'), 'RRRR')
AND :P_TO_DT<:MATURITY_DATE
AND :ACCT_OPN_DT<:P_FR_DT
THEN RETURN (:P_FR_DT-:P_TO_DT+1);
ELSIF TO_CHAR(TO_DATE(:P_FR_DT, 'DD-MM-RRRR'), 'RRRR') =TO_CHAR(TO_DATE(:ACCT_OPN_DT, 'DD-MM-RRRR'), 'RRRR')
AND :P_TO_DT>:MATURITY_DATE
AND :ACCT_OPN_DT<:P_FR_DT
THEN RETURN (:P_FR_DT-:MATURITY_DATE+1);
END IF;
END;
It gets compiled successfully but when i run the report, i get 2 errors.
Error 1:
REP-1401: 'no_daysformula':Fatal PL/SQL error occurred.
ora-06503: PL/SQL : Function returned without value.
Error 2:
REP-0619: You cannot run without a layout.
Should i use only 1 return statement?
Can i use as many return statements as i want?
What is the exact mistake? Please let me know.
Thank You.

Let me clear you the first thing...
If you get any fatal errors while running the report (e.g., function returned without value,no value etc.,) the report will show
REP-0619: You cannot run without a layout.
So you just correct the function 'no_daysformula' .
First of all you run the report without that formula column.
If it works fine then , Check the return value of your formula column (Your formula column properties --> Return value --> value (It will be DATE as i think so).
As function will always return a single value, Check your formula 'no_daysformula' returns the same.
declare a return variable say for example..
DECLARE
V_DATE DATE;
BEGIN
--YOUR CODE---
RETURN V_DATE := (RETURN VALUE)
END;
Last but not least ... use Else condition to return (NULL or any value ) in your code and check..
If any Problem persists let me know
Regards,
Soofi.

Word 2007 AddIn Cannot Run on Windows XP SP3 + Office 2007

Hi All,
I faced an issue regarding our Word 2007 AddIn cannot run on Office 2007 + WinXP SP3.
I developed a Word 2007 AddIn using VS 2010. The addin works fine on Win7 + Office 2007. But It cannot run in Word 2007 in WinXP.
I have tried the following testing.
1. I rebuild a new WinXP environment + Office 2007 + VS 2010. No antivirus in my machine. I create the Word 2007 AddIn using VS 2010. But unfortunately, it cannot run in my WinXP machine. it's very strange.
2. I rebuild a new Win7 environment + Office 2007 + VS 2010. No antivirus in my machine, and the same steps with previous. it runs fine.
3. I noticed that, if I debug the Word AddIn Project using VS 2010 In XP, it cannot run into debug mode. I checked the Word Options
I have highlight the test addins it always uncheck. If I checked it, when I reopen Word. it will change to uncheck status.
And the addins always in Inactive Application Addin group.
@All guys, How to solve this issue? It's very very strange.
Thanks a lot for your help.
Regards,

Hello Ricky,
First of all, I'd suggest checking the Trust Center settings in Outlook. Then take a look at the Disabled Items list. Is your add-in listed there?
Microsoft Office applications can disable add-ins that behave unexpectedly. If an application does not load your add-in when you try to debug it, the application might have hard disabled or soft disabled your add-in.
Hard disabling can occur when an add-in causes the application to close unexpectedly. It might also occur on your development computer if you stop the debugger while the Startup event
handler in your add-in is executing.
Soft disabling can occur when an add-in produces an error that does not cause the application to unexpectedly close. For example, an application might soft disable an add-in if it throws an unhandled exception while the Startup event
handler is executing.
When you re-enable a soft-disabled add-in, the application immediately attempts to load the add-in. If the problem that initially caused the application to soft disable the add-in has not been fixed, the application will soft disable the add-in
again.
You can read more about that in the
How to: Re-enable an Add-in That Has Been Disabled article in MSDN.

Error: Cannot run program "C:\Oracle\Middleware\jdk160_21\jre\bin\javaw.exe

Hi
I have created a sample Fusion Web Application(ADF) and created a test.jsp in viewcontroller with few components. I have started the integrated weblogic server and started successfully, but when I run test.jsp it is giving me the below error
Error: Cannot run program "C:\Oracle\Middleware\jdk160_21\jre\bin\javaw.exe" (in directory "C:\Documents and Settings\chowdamr\Application Data\JDeveloper\system11.1.1.4.37.59.23\o.jdeveloper\DefaultWorkspace"): CreateProcess error=267, The directory name is invalid.
Initially this page is working successfuly.
Please tell me whats the problem.
Edited by: 858782 on May 13, 2011 5:28 AM

There are some problems when JDev's system directory (e.g. the \system11.1.1.4.37.59.23 directory) is in a path that contains spaces (as it is in your case - C:\Documents and Settings\...). Move the system directory to a path without spaces and try again. The simplest way to move it is to start JDeveloper in a "single user" mode (use <tt>jdeveloper.exe -singleuser</tt>) which will create the system directory within JDev's home directory. Of course, if your JDeveloper is installed in a path containing spaces, it will not work either (for example, if JDev is in C:\Program Files\...).
Have a look here for a more sophisticated approach for moving the system directory to another location:
http://technology.amis.nl/blog/8387/change-the-jdeveloper-system-directory
Dimitar

Problem running your example with TCL in TestStand 2.0

I`m having problems trying to run your example: "Calling TCL Scripts from TestStand 1.0.x". I use TestStand 2.0. In fact, I don`t see any response when running first step in a sequence. Could it be issues related to the TestStand version.

The example should work in TestStand 2.0.x, since other users have reported that they have successfully done so and nothing has changed in TestStand 2.0.x that would affect its execution.
In order to get the example to work you will need to have the TCL interpreter installed correctly so that the dll being used in the example can invoke it. If you can programmatically control the interpreter with any other code module as this dll does then this example should work as well. However, if you cannot do this in any way on your system then it is safe to say that nothing will work including the example. Verify that the TCL interpreter will work in this fashion per the vendor's instructions and then try the example again. If you are receiving errors from TestStand
when executing the sequence let us know about those and we may be able to help you more directly.
Jason F.
Applications Engineer
National Instruments
www.ni.com/ask

Error in running LV2013 example for 6023

Hi all,
I have PCI6023E card installed in the system where LV2013 was installed also. I am running the example by "Find Example" to test "Counter Continuous Output.vi", the description of the example said that it supports PCI6023E but when I run it, it shows the following error
Error -89136 occurred at DAQmx Start Task.vi:7220001
Possible reason(s):
Specified route cannot be satisfied, because the hardware does not support it.
Property: CO.Pulse.Term
Destination Device: Dev1
Destination Terminal: PFI0
Task Name: _unnamedTask<7>

Hi dragondiver,
Your E Series DAQ's counter outputs can only be routed to certain PFI lines. You can check the routing table in NI-MAX: when you are looking at your device, click the "Device Routes" tab at the bottom and it will show you which inputs work with which outputs. I think what's going on is that you are trying to route the counter to a PFI line that doesn't work.
Looking at the table, I see that counter 0 works with PFI3 and 4. If you try to route it to 0, 1, or 2, you will get the error you're seeing.
Does this resolve the issue?
Julian R.
Applications Engineer
National Instruments

Run the example of ejb tutorial ...

When I run the example of "Enterprise JavaBeansTM Tutorial:
Building Your First Stateless Session Bean"--DemoClient,(Weblogic server 6.0,
win 2000) ,I met a probelm.
Following is the error information:
C:\bea\wlserver6.0\CLASSES>java -Djava.naming.factory.initial=weblogic.jndi.Teng
ahInitialContextFactory -Djava.naming.provider.url=t3://localhost:7001 ejb.demo.
DemoClient
begin DemoClient...
=> Error <=
javax.naming.NoInitialContextException: Cannot instantiate class: weglogic.jndi.
T3InitialContextFactory. Root exception is java.lang.ClassNotFoundException: we
glogic.jndi.T3InitialContextFactory
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:297)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:286)
at java.lang.ClassLoader.loadClass(ClassLoader.java:253)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:313)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:195)
at com.sun.naming.internal.VersionHelper12.loadClass(VersionHelper12.jav
a:45)
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:6
55)
at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:246
at javax.naming.InitialContext.init(InitialContext.java:222)
at javax.naming.InitialContext.<init>(InitialContext.java:198)
at ejb.demo.DemoClient.getInitialContext(DemoClient.java:58)
at ejb.demo.DemoClient.main(DemoClient.java:15)
End DemoClient...
Any guidance will be appreciated!
Thanks, Yu

I managed to fix my problem, hopefully thissolution
will help you as well.
I discovered that the following entries arerequired
in the jndi.properties file in order to lookupEJB's
using JNDI from a client application:
java.naming.factory.initial=com.sun.jndi.cosnaming.CNCt
Factory
java.naming.provider.url=iiop://localhost:1050
Note that my environment uses the j2ee server fromSUN
running on the localhost on port 1050.
If you can locate the proper settings for theweblogic
server, then you can try this solution on for size.
One quick question: When I try to run my client
against the Ref. Implementation like this:
java -Dorg.omg.CORBA.ORBInitialHost=localhost
-Dorg.omg.CORBA.ORBInitialPort=1050
-Djava.naming.factory.initial=com.sun.jndi.cosnaming.CN
txFactory
-Djava.naming.provider.url=iiop://localhost:1050
com.sld.role.ValidationClient
I get the following error:
javax.naming.NamingException: java:comp/env namespace
is only available from within a J2EE component.
This stinks. All I can find out is that Sun wants you
to use runclient, which is silly. My client is trying
to resolve the JNDI name:
"java:comp/env/ejb/ValidationSessionBean"
Any idea why this isn't working?
Thanks....
-ScottGot it working. Here's how:
In the client's CLASSPATH I have three things: j2ee.jar, the client jar file generated by the server during deployment, and my client class files. I took out all of the -D stuff above and it still works. (With or without it.) I haven't tried it from another machine yet - I may need them for that.
The client uses the JNDI name "ValidationSessionBean", not "java:comp/env/ejb/ValidationSessionBean" and it now can bind to it.
I wish Sun would have given out this kind of info with their J2EE tutorial, instead of just pushing their runclient script, which uses their own client class.
-Scott

Can't run DukesAgeResource examples (Your First Cup)

Hello, I believe I have found a possible issue in the "Your First Cup: An Introduction to the JavaTM EE Platform", and wonder if it relates to the fact that I cannot manage to run the example. At page 21, step 12, is states "In the REST Resources Configuration dialog, uncheck Add Jersey Library and click OK.". However, after clicking Finish (Step 11) no such a dialog is displayed, instead, NetBeans shows the DukesAgeResource.java file right away. Once I have completed entering the example and try to run it, I get this error message on the browser
HTTP Status 404 -
type Status report
message
descriptionThe requested resource () is not available.
GlassFish Server Open Source Edition 3.1.2.2
I deleted my project and files and tried again half a dozen times, with the same result.
I am starting out with Java EE, any clue about what I may be doing wrong? May be the issue is related to the discrepancy on the "Your First Cup" tutorial?
Note that the ready-made example that comes packaged with NetBeans runs fine.
Edited by: 966753 on Oct 21, 2012 6:25 AM

Fanta wrote:
Still, I believe I had followed all steps in the tutorial carefully.That's the sh1t with tutorials - they don't teach you anything, they just show you how to do stuff. So they can also show you how to do stuff badly and you'd assume it to be truth.
Get a good book and begin by understanding it all, not by learning "what code to write".

Why the following command cannot run successfully?

Why the following command cannot run successfully?
SQL> exec DBMS_SPM.EVOLVE_SQL_PLAN_BASELINE;
BEGIN DBMS_SPM.EVOLVE_SQL_PLAN_BASELINE; END;
ERROR at line 1:
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to
'EVOLVE_SQL_PLAN_BASELINE'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored

Here is an example how you can invoke it:
SET SERVEROUTPUT ON
SET LONG 10000
DECLARE
    report clob;
BEGIN
    report := DBMS_SPM.EVOLVE_SQL_PLAN_BASELINE(
                  sql_handle => 'SYS_SQL_593bc74fca8e6738');
    DBMS_OUTPUT.PUT_LINE(report);
END;
/With kind regards
Krystian Zieja
http://www.projectenvision.com

How do I install itunes on a windows 8 computer. I keep getting the message that the app cannot run on my computer.

I cannot install itunes on my windows 8 computer. I get the message that the app cannot run on my computer.

Hi mlheidt,
If you are having trouble installing iTunes on your Windows 8 computer you may want to use the following article to help you get it up and running -
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thanks for using Apple Support Communities.
Best,
Brett L

App cannot run on Windows Server 2012 R2

I have an application that runs well on Windows Server 2012. The application has two editions 32-bit and 64-bit, both are from the same code base.
However, on Windows Server 2102 R2, the x64 version of the application works, but the 32-bit version does not run. Invoking the 32-bit of the application generates the "This app cannot run on you PC" message.
I tried the compatibility troubleshooting, and it does not help.
Any suggestion on what could be the problem?
Thanks.
jwang

<moved from Downloading, Installing, Setting Up to Photoshop General Discussion>

After fresh installation on a new machine, my licensed copy of Adobe Encore CS6 "cannot run in non-royalty serialized mode."

"The application needs to be serialized with a royalty bearing serial number."
I have done everything recommended in all of the other threads relating to this issue -
Uninstalled the entire CS and used the Adobe cleaner tool - to no avail.
Uninstalled just Encore and re-installed, nothing.
And multiple combinations of the above mentioned.
Really need this to work, ASAP. We've tried to contact Adobe via phone, chat, and other means. They are very to receive an audience from, it appears. Can anyone offer a different solution?
This is for a brand new edit suite that is running Windows 7 pro, 32 GB of RAM, and the [email protected] GHz.

I did not see this earlier. Forums are a bit odd today.
Do you have a subscription (to the cloud) or is this a perpetual license? You cannot run Encore in trial mode.
Generally, with CS6 suite (or earlier?) this indicated that Premiere is not activated, or there is a problem with activation. What version are you trying to install?
Unfortunately, the link that tells you how to fix this went missing in action some time ago.

Cannot run SpeakHere example

Similar Messages

Maybe you are looking for