Cannot see XI receiver CC in monitoring

Hi,
I cannot see XI receiver CC on the communication channel monitoring. I understand it doesnt reside on ABAP stack and should be listed in the list of CC.
All cache refreshes are done FYI.
Venkat.

Hi Venkat
refer the similar thread , which is solved
Communication Channel Monitoring Error
Re: Comm channel missing in comm channel monitoring
Communication Channel Monitoring Error
Regards
Abhishek

Similar Messages

Cannot see PI receiver(Proxy) adapter - advanced adapter specific message

Hello Friends,
I cannot see adapter specific message attributes in receiver adapter XI (abap proxy) for enabling. I want to use these properties for getting a file name dynamically in a receiver structure.
I had seen a blog by Mr.Michal but that gives details for file to file. Here my target is abap proxy so I cannot see advance tab properties in XI adapter used communication channel.
Clearly my interface is file to ecc (using proxy), where i will have to read a file name which my interface picks and has to update in ecc.
I have enabled the sender side File adapter - ASMessage attributes but am not able to find the attributes in receiver side. Does it make any diffrence if am not enable the attributes at receiver adapter.
Thanks very much.

Swarna,
in your scenario in order to have the file name updated on ecc, you must:
1. Set the ASMA properties on sender channel
2. Read the property in mapping and put the value in a custom field on the proxy structure. Create an UD like this:
UD
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String onixdataset = conf.get(key);
--- END UD
3. Manage the filename in the proxy class with your requirements
Regards,
Andrea

Cannot see external Monitor

I am using a Canopus ADVC-100 to connect to my external monitor. I used the easy setup so that I can use the monitor. I cannot see the video on the monitor while I am editing. However, if I use "Print to Video", I see the video on the external monitor.
What am I doing wrong?

Select View>Video Out>Refresh Video Devices.
If Canvas Playback is Selected the firewire out is effectively switched off.
Al

Cannot see adapter engine messages in message monitoring

hi guys,
i cannot see my adapter engine messages in message monitoring for my http to RFC syncronous scnenario.
i can however see the integration engine messages and can also see the receiver RFC channel in communication channel monitoring

Hi
this link ll help u in it -
Adapter Engine monitoring is provided in detail. Try as mentioned
http://help.sap.com/saphelp_nwpi71/helpdata/EN/7c/14b5765255e345a9e3f044f1e9bbbf/frameset.htm
Regards

HT2500 Mac mail macbook pro 10.6.8 receiving messages hear chime but no mail notification. cannot see or open

Mac Mail. receiving messages. I hear chime. Cannot see notifications in inbox or mail icon in dock. Thus cannot open messages. Macbook pro 2009 10.6.8.

Hi Softwater,
Thanks for your kind and swift response.
It's not the recent e-mails which I'm worried about.
They can stay on the server until I've resolved my OLD e-mails, 99% of which are long deleted from their servers.
I'm deliberately keeping Mail offline until I've retrieved my 20 year e-mail history, all of which has been put into sub-folders within sub-folders within sub-folders.
I've got to get my e-mail history back.
Thanks.
Best,
Michael

Does Mac Messenger work with iPhone 4 system 5.01...? (I am receiving a notification of receipt but cannot see the messages sent.)

To those who might know
I have an iPhone 4, with OS 5.1
I am receiving notifications of messages sent by various other users but cannot see the messages.
Question: does Mac Messenger only work with 4S models..?
Thanks.

a successful automount of the other mini cd gives me
$dmesg | tail
[ 5667.156904] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 5667.157448] ISOFS: changing to secondary root
and
$mount
/dev/sr0 on /media/110103_1110 type iso9660 (ro,nosuid,nodev,relatime,uid=1000,gid=1000,iocharset=utf8,mode=0400,dmode=0500,uhelper=udisks)
and there is a /dev/sg1 under /dev (instead of only sr0 before~~)
(nothing changed in lshw (well, except the mount point is added~~~))

Cannot see received messages in Mail

I have a strange problem with Mail that arose after I deleted some messages.
The mailboxes toolbar (the one down the side) clearly indicates that unread messages are in my In Box. However, they do not appear when I try and open the In Box. I have tried sending test messages to myself and Mail indicates they have arrived, but I cannot see them in the main menu.
Any suggestions out there before I delete the account and recreate?
Thank you.
Andy

Thank you for the suggestion.
I actually went to the Mail folder in Library and found the account had an Inbox folder unlike my other accounts. I deleted this folder, quit Mail and reopened Mail - problem solved.
I am not sure what happened, but as this account was receiving more than 25% spam I am now prompted to deleted and create a new account.
Thank you very much for all your help.
Andy

TS2755 I cannot see contact names in messages and I cannot send or receive messages. This started last night. I have updated the latest software. I have rebooted several times.

I cannot see contact names in messages and I cannot send or receive messages. I have downloaded the latest software. This started yesterday.

What system is your mail in? Corporate Exchange? GMAIL?

I recently clicked on an iphoto 'upgrade' message I received and now I cannot see ANY of my photos!! Desperate for help! Please. Thanks.

I recently 'upgraded' my iphoto because everytime I clicked on it, I got a message telling me to do it. Now, I cannot see ANY of my pictures. Very frustrating. I've already gone to 'software updates' and tried that to no avail. Please, anyone... HELP!!! Thanks!!!

There are 9 different versions of iPhoto and they run on seven different versions of the Operating System. The tricks and tips for dealing with issues vary from version to version and OS to OS. So before anyone can help, they need information to work with. Things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. What were you doing when the problem arose?
- Did it ever work properly?
- Are there error messages?
- What steps have you tried already to solve the issue.
Anything else you can think of that might allow someone else to understand your issue.

Cannot see a reciever communication channel in RWB

Hi all,
I have configured a scenario RFC -> XI -> Java proxy. I have created a buiness system "Web As Java" and have assigned a receiver communcation channel to it.
My scenario is not working. When i checck in RWB, i cannot see the reciever communication channel created under this in adapter monitoring. While i have other ABAP systems under same configuration scenario which has other many Comm Channels and are shown.
Can anybody please suggest the possible reason and solution for the same?
Any help will be appriciated.
Regards,
Kulwant

Hi,
Just check the mentioned possibilities for your error one by one:
1.Did you maintain Client, userid, password, and lang information in SICF transaction -> sap/xi/engine? Double click on service and check whether you have entered correct information.
2.Then you might check the roles of the XIISUSER in SU01. In some case there are some double roles, i.e., two times the role SAP_XI_IS_SERV_USER assigned. One might have the date of the last update, the other one might have apparently the older version. Delete the older roles manually and the error should disappear.
3.to send messages to xi you need a service id / pwd which is specific to your landscape usually its xiappluser. Contact your basis group for password.
4.
Activated all services on the r3 system.
Create HTTP connection to XI from r3
sm59-> http connetons to r3
let us say you have created a HTTP connection in the integrationserver_XI, make sure in its settings the prefix path is set to /sap/xi/engine?type=entry. Also check its log on credentials, you can use xiappluser.
IN Integration builder, receiver communication channel make sure you have entered proper
host service number
path = /sap/xi/enigne?type = receiver.
5. It might also be that you have authorization problems with your XISUPER. In the visual administrator and in ABAP SU01, make your XISUPER has all the necessary(SAP_SLD* and SAP_XI*) roles assigned to it. If not, try to assign these and see if this can be of any help.
6. can you also try the following;
Visual Admin -> start the service,
"com.sap.aii.af.ms.app".
Please go through the followings links also :
http://help.sap.com/saphelp_nw04/helpdata/en/82/f4993c03e0cd37e10000000a11405a/content.htm
The specified item was not found.
http://help.sap.com/saphelp_nw04/helpdata/en/39/83682615cd4f8197d0612529f2165f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/39/83682615cd4f8197d0612529f2165f/frameset.htm
I hope the info provided help you solve your error.
check out
1.Check that the port really is the ICM HTTP Port (transaction
SMICM) and not the J2EE port...
2) Hope your SAP system is configured as Application system in teh transaction SXMB_ADM in the SAP system
Thanks
Swarup

I have just dowloaded the icloud control panel on my PC and i am am able to see everything that has been pushed to icloud from my ipad. However i cannot see my email. i can send from the computer using icloud, but i do not see any mail that is being rec.

i have just dowloaded the icloud control panel on my PC and i am am able to see everything that has been pushed to icloud from my ipad. However i cannot see my email. i can send from the computer using icloud, but i do not see any mail that is being received by my ipad, which is set up with my mail server. What haven't i checked lol?

turn your ipad off by holding the sleep wake button for 5 seconds and slide to turn off then turn it back on and the apps should be finished and if the apps didnt finish just redownload them

Cannot send or receive yahoo mail or gmail from iPhone . installed ios 6 recently. tried rebooting the phone and deleting the email account and adding again but nothing works ! can someone suggest a solution?

cannot send or receive yahoo mail or gmail from iPhone . installed ios 6 recently. tried rebooting the phone and deleting the email account and adding again but nothing works ! can someone suggest a solution?

Not sure about yahoo, but for gmail, I done the following:
Set up using Exchange on iPhone, it'll keep prompting for password. On PC use captcha option, log in to gmail account from PC after completingg captcha option, enter password on iPhone.
See how that goes for gmail, let us know.
Hopefully someone will have fix for yahoo.

Satellite M70-340: I cannot see the DVD schort cut menu after reinstallation

Hi,
I just recently bought Toshiba M70-340 2 weeks ago. Now I learn that there is better Toshiba comparing the my one.
My question is I cannot see on the screen the DVD schort cut menu. First time when I opened it it was on the rıght handside
of screen and my machine was Turkish Win XP Home edition. Than I reformat and change into English version of WinXP that comes with in Toshiba recovery CD. But I lost the screen menu for DVD I guess. Now ı don't know how to re-install that option.
Plus my machine is use the Intel Centrino 1.7 but I am not sure if this is a dual proccess. Secondly the ram is 512MB and I am trying to buy 2GB extened ram but seems still very very expensive (around $1100) Why is that 2GB ram so expensive?
I am using my laptop for software engineering as well as using Macromedia flash and Adobe Photoshop.
The both application and MS VS.NET 2005 as well as SQL Server 2000 and SQL Server 2005 application are very slow and sometime it takes more than 30
min. to compile or open it.
I have my home PC P4 3.2G with 1GB ram and it's faster than my Toshibe laptop.
Please be patien with me, after a 5 years later I bought my second laptop and first one was notebook from another manufacture.
I search in the internet and I find the M70-340 with Turkish Q type keyboard was the best option and it cost me $1450.
All I need how to overcome my problem and I need someone from Toshiba to explained to me carefully.
Can someone read my post and answer my question and worries?
I thank you very much and I looking forward to receive some help.
Kind Regards,
NTMS2006

Hello
I dont want to disappoint you but please dont expect someone from Toshiba will write to you because this is user-to-user forum. I will try to write some comments because I have the same unit as you.
This DVD shortcut is really not understandable for me and I really dont know what you are writing about. If the DVD drive is recognized and installed properly it should be listed in device manager and also shown in Windows explorer. If you want to discus about it please describe exact status of DVD drive in device manager and Windows explorer.
You are right about memory. This notebook is delivered with 512 MB Ram. According the notebook specification it can handle max with 2GB of Ram and if you want to use max please use 2x1GB module. Compatible one is DDR2-400/533 1GB (PA3411U-1M1G).
2GB modules are the newest and everything new is very expensive. I dont know how much it can costs but definitely not around $1100. For this money you can buy the whole notebook.
The list of used software is impressive and I am not wondering if the notebook runs slow. Upgrade it to max Ram and it will be much faster. Please dont compare your desktop with this mobile unit.
Pick up info how much costs PA3411U-1M1G memory module and use two of them for max RAM. You will see that unit will run faster and I hope you will be satisfied with performance.
Have a nice day!

I am not able to see toolbars, when I open a new window that window is not visible, if I open from bookmarks and there is music playing I hear it but canNOT SEE the websites.

I am not able to see toolbars, when I open a new window that window is not visible, if I open from bookmarks and there is music playing I hear it but canNOT SEE the websites. I was able to get window open from the help "window" and open sites from there just not from new: window tab or bookmarks those stay invisible? I tried the help suggestions, safemode,etc.

Hi CMorenoOT,
This prompt is usually displayed when your Apple ID needs to be configured for the iTunes Store. You'll want to run through the additional steps to setup your country, and payment information.
iTunes: How to set up an Apple ID within iTunes
http://support.apple.com/kb/HT2731
Tip: If you are trying to create an account using an existing Apple ID, like your iCloud email address, you will receive a prompt telling you that your email address is already an Apple ID. Simply tap Continue, and then tap Use Existing Account on the following screen.
- Next, you'll be required to enter your billing information. To choose a different Credit Card type, tap one of the available options, and then tap Done. You will not be charged until you make a purchase.
- Once you've filled out all of the fields for your billing information, tap Next.
For more information:
Using an existing Apple ID with the iTunes Store and Mac App Store
http://support.apple.com/kb/HT2589
Thanks,
Matt M.

Cannot see emails in the inbox, but can send emails out. why?

I bought the Galaxy S III about 3 months ago, and have been struggling to set up my personal email (my own domain hosted by godaddy.com). my gmail accounts sync up nicely from day 1.
Today, a tech rep from Godaddy.com suggested that i turn off wi-fi, and set up the account using the phone connection only. That seemed to work, and i was able to set up personal email accounts (my own domain).
Issues: i cannot see any email in the Inbox. Every time i hit the button "load up to 50 more messages", the Update icon would spin for a few seconds, but no emails show up. the message said "account last synced on date..., time....". still no emails in the Inbox.
a) i tried using the email software that came with the phone for the (the icon has an envelope and a red seal in the middle). the email was correctly set up, i was able to send emails out, but still no emails show up in my inbox.
b) i tried using the K9 email app (downloaded from apps market, free). the email was correctly set up, i was able to send emails out, but still no emails show up in my inbox.
Does anyone know what i did wrong? or is something wrong with my phone?
thanks so much for your help

qnv wrote:
good thinking.... I'm trying to set up Outlook 2010 on my desktop. it's downloading emails from the server, but because i have so many emails up there (50K) for the past few years, it's not functioning properly yet. i can see the emails and i can move them to different folders (10K emails in Inbox at a time, more get downloaded as i move emails out of the Inbox). but i cannot send emails out from Outlook on the desktop.
wonder if these 2 issues are related.
i can see, receive and send emails directly on the server (web) no problem.
I would try clearing out your inbox as much as possible, and then try it. Maybe it cannot index correctly to download because there are so many. Just a thought.

Cannot see XI receiver CC in monitoring

Similar Messages

Maybe you are looking for