Cannot select fields for calculation

It will only allow me to select all the fields or deselect all the fields. When I try to click on a specific field, it highlights the field in blue but will not checkmark it.

Found the solution:
Hi,
Solution Remove Adobe PDF from the Disabled Items list in the Microsoft Office application. To manage your Disabled Items list in a Microsoft Office application:
Open the Microsoft Office application (Word, Excel, Publisher).
Choose Help > About [the application name].
Click Disabled Items.
Select Adobe PDF from the list, and then click Enable.
Quit the Microsoft Office application, and then restart it.
View an Adobe Captivate demo of this procedure
If the error message continues to appear after you enable Adobe PDF, then check the security level for macros in Word:
Choose Tools > Macro > Security.
In the Security dialog, click the Security tab.
Choose Medium or High.
Do one of the following:
If you chose Medium, then click OK.
If you chose High, then continue with steps 5 through 7.
Click the Trusted Publishers tab.
Check Trust all installed add-ins and templates.
Click OK.
PDFMaker and the right-click context menu should function again.
View an Adobe Captivate demo of this procedure
http://kb.adobe.com/selfservice/viewContent.do?externalId=329044
Thanks
proton

Similar Messages

Cannot select fields for calculating other fields~

Help -- I am tryiing to get certain fiels in a form to calculate based on selection of other fields. The fields to be selected already have values in them. (The same format I have used for several years, just new set of forms)
I get through the point of setting up the field properties to calculate and I select Sum of... Then it simply will not let me select any fields to use for calculations -- unless I select all fields.
Please -- this is time sensitive and urgent any help responses needed and welcome!

Sounds like you are having issues with Acrobat and not FormsCentral. You would get a better help if you post your question on the Acrobat's forum
http://forums.adobe.com/community/acrobat/forms
Gen

Validating a selection field for meeting the ranges given in the Domain

Hi Experts,
Please let me know the proceedure to Validating a selection field for meeting the ranges given in the Domain.
In my case, i am using the domain 'AUFTYP' Order category which has value range like 01 , 02 .... Which are displyed during F4 help.
Please advise to validate these ranges.
Thanks in advance,
Viven

Hi,
If the values are maintained at domain level guess the check will be done automatically. You dont have to validate the entries in the field.
Cheers
VJ

I cannot select sync for contacts. I had a previous issue which suggested I reset sync history now I can't select an email account or where to sync contacts.

I cannot select sync for contacts. I had a previous issue which suggested I reset sync history and now I can't select an email account or where to sync contacts. I check the checkbox but no email accounts are present to select. My iPhone4 has all the contacts & mail account and runs ok.
Part of the solution to the previous problem was to delete (really I moved it) the contents of the backup folder. Now I get this message "iTunes was unable to load data class infromation from Sync Services". I moved the folders and files back and it did not help.

An alternate email isn't a rescue email, and it isn't possible to add an actual rescue email without correctly answering two of the questions. If you're desperate enough, create a new Apple ID; you won't be able to transfer previous purchases or iTunes Store credit to it.
(95601)

How to Pick fields for calculations in forms?

I have all the fields in place, with all apparent formatting required for each. Using Properties > Calculate > Pick, Adobe will show me the list of all of my fields, but will not let me populate them in the Pick field individually. I can Select All and Deselect All, but choosing individual fields is totally hit or miss (~95% miss), with no apparent reason. I've been able to select fields that are not formulated as numbers, but cannot select those that are. I was able to select QtyRow9 and UnitPriceRow10 for TotalPriceRow1, but nothing else. I can even change the quantity and unit price in Preview and it calculates correctly. However, there are over 50 more calculations in this form.
My manager was able to open my file and Pick fields on the Calculate tab. After he saved the file and sent it back to me, I still cannot Pick as I would like to. I have Adobe 10.1.1 Standard, while he has Adobe 9.1.2 Standard (he was able to open my file with no problem). We both used Tools > Forms > Edit, although his buttons are located differently than mine. Any ideas what I might be missing?

Pravender --> Yes fields are available when testing datasource in RSA3, but replication does not bring anything new (no selection possible on those fields)
MD --> Ok for the fields not allowed, but here is the need on my side. Maybe somebody knows a workaround to get this selection available ? (or another way to perform it)
I can see in the 4th tab (name is "update") in infopackage screen (BW), a frame named "time-dependant data", and here i have a possibility to filter according dependance period, but only 3 possibility :
- fixed time interval
- routine time interval
- variable for interval
but none of the three allows me to do what I want ...

Can't pick fields for calculation

This is very frustrating.
I am editing the fields of an invoice form and want to use the last field of the line to create a total. I select the field and go into its properties. Under the "Calculate" tab, I select "Value is the 'product' of the following fields" and then click the "Pick" box to select which fields to calculate. I'm then provided with a list of all my fields and I tick my selections and click OK. But once I click OK, I am taken back to the Calculate tab with none of my selections in the fields box. Basically, it does not register my selections.
I have tried this every possible way I can imagine, restarted everything, etc. Still, no matter what I do I cannot get it to register the field selections I make for calculation. I managed to do this successfully for the first line in the form (seemingly at complete random) and haven't been able to reproduce any success for subsequent fields. I check the fields and once I hit OK it completely ignores them.
Any help here would be greatly appreciated.
RP

Consider using one of the other calculation options. For example, to use the simplified field notation option you'd enter something like this:
Text1 * Text2 * Text3 * Text4
This will work if your field names don't have any spaces or punctuation characters in them. It's possible to escape space and punctuation characters with the \ character, but it can get messy
The other option is JavaScript, which would look something like this:
// Set this field to the product of some fields
event.value = getField("Text 1").value * getField("Total1.1").value * getField("Another field name").value;
Note that you can include any field names you want inside the quote characters, so it's more flexible/cleaner than the previous option.

Batch Reverse Telecine - Cannot Select Fields?

Hi, I'm trying to reverse telecine some footage and I've run into a problem where the only way to do it correctly is to it manually, one clip at a time. When I run a reverse telecine on individual cips, I have the option of selecting the field order (ie AA/BB).
The problem is when I try to run a batch reverse telecine, I can no longer select the correct field order. For my particular footage I need to select the "CD" field order in order for the pulldown to be correctly removed. However, for some insane reason, I cannot select the correct field order with Batch Reverse Telecine.
Why is this? Can I expect a resolution for this any time soon? Or is Apple not going to correct this before they release another update that I have to pay for...
Anybody have any insight?

... running into the precise same problem right now. very frustrating.
the manual indicates that the "batch" feature should use the settings that were set on the last individual clip reversed (ie if the last clip was set to use BB, then the batch should be done using BB). this is clearly not how it is working, or i am missing something (every time i try, the batch is done to AA)
R.

Selection field for vendor categorisation

Hi,
I have request to find a proper field for letter code and description in vendor master for vendor categorisation. (Like for example Order currency field in Vendor Master) The field must be minimum three caracter long.
Further this vendor categorisation data will be required to appear in some reports.
Can anyone tell me the way to implement this vendor categarisation code.

Hi,
You can use many fields for vendor categorisation purposes such as mainting SIC code, Industry type etc. The best place to do this is General section/control tab. there are fields under referece data section such as LFA1-KRAUS Credit Info number that can be used or you can append the LFA table with custom fields. Sometimes these fields are suppressed and not visible in Vendor master screen. To enable them you need to navigate to img-financial acc.-acc. receivable&payable--vendor accounts -- master data -- Preparations for Creating Vendor Master Data -- Define Screen Layout per Activity (Vendors) and change from suppressed to optional or mandatory.
Hope this helps

Return Code 0XFFAB411C received when setting selected field for timestamp

I have a time stamp field that I want to change the selected fields (the fields that determine whether the time stamp gets updated)
When I select ALL fields and save I get the return code of 0xFFAB411C.
I have ran verify repair on repository, no change
I have archived and unarchived, no change
I have deleted the field and recreated it with the same result.
When I create the field it defaults with selected fields "ALL" I need to add all the fields and remove 2-3 fields but I get the error message.
I have added fields one by one until I get the error message, then try it with just the last field but I do not get the error.
Any ideas?

FYI this is the response from SAP regarding this issue.
Please refer to SAP Note 1283688 which documents the limitation while
using time stamp fields.
As this is a Database limitation and currently can't be removed, please
consider the following options :
1) Since most of the fields are to be included, leave selected fields
with [All]
2) Split the table fields to 2 (or more) groups and add a Time stamp
field to each group
3) Lower the number of fields that should be tracked by the Time stamp
field
If both solutions are still not valid to use by the business, please
refer to SAP Note 1156293 on how to file an enhancement request.

Me59N - Additional Selection Field for New Purchase Order

Hi Everyone,
I have a requirement to add a new field to the selection screen of ME59N. Basically the client requires 'Per Material Group' to be defined under 'New Purchase Order. I've searched around but cannot find something similiar.
My question is: Can this be acheived without copying ME59N to a custom version ? I'm told a particular enchancement (me590001) can be of use but I dont think it's suitable for this requirement.
Any help or advice is greatly appreciated.
Many thanks
G

Hi Bipin,
Yes, that would be an option if we couldnt find a solution for setting a new selection condition in CFM1. Is there a CIF userexit related to sales order? That would be grateful..
Cheers.
Thanks in advance
Vignesh M

Accessing the field values in different fields for calculation

Hi,
I am creating a report in which I have used breaks for grouping the customers by their category. I have used summary on the amount field to calculate the sum in the individual category and also for total amount.
Now, I also want to add an column which could display the percentages of individual contributions.
So, its like I have to write a query accessing the total percentage, categorized percentage and individual amount.
My question: How can I access the various fields values in the query of some other field specifically sum and total sum( because it shows the sum([Amount]) for category sum and total sum both)
-BOBJuser

Hmmm, I assume you are talking about WebIntelligence here...
Ok, so let's go: you can access every "object" in the report simply by it's name. Every cell contains either a constant value (e.g. some text) or a formula, the simplest one can be just the value of an "object" from the query.
There is a formula bar on top which you can activate, where you can easily see the content of a specific cell and also copy/paste the formula from the cell, as well as access all the built-in functions.
WebI has a built-in calculator which works very similar to a "micro" olap engine, so you can access every sort of aggregate (of a measure) via a correspondig formula, irrelevant in which cell you are using it.
Nevertheless, there is a "computation context" which depends on the place where you put the formula, e.g. summary row, detail row, etc.
for more info: see the manual )
hth, Walter

Selecting fields for flat file input

I've built a scenario that uses the File adapter to load a flat file into SAP and fully understand the concepts. My problem is that I have fixed length file I need to load which has 50+ fields per row. I only need 10 fields per row and those fields are spread throughout the row. Using fieldFixedlengths I specify the length of each field - and it appears they must be consecutive fields. How can I specify the fields that I need.
For example my input file may be as follows
AAAAAAABBBBBBBCCCCCCCDDDDDDEEEEEEE
I only need AAAAAAA CCCCCCC and EEEEEEE. Is there a way to do this?

Hi Robert,
I don't know why you want to upload all junk data there apart from importing only relevent fields. if i am concered to do so, i'll do this in outside the XI BOX. If that file is in come fixed format or lets say its in csv format, just open that file into excel and then try to remove the row you don't want and then save it again to the same file format. and then import and map inside XI it will be simple.
Also if you don't wanna to do this, then tell us what logic you wanna use to find which rows you don't want. I don't think if you are not sure or you already know what rows/fields u want.
Regards
Aashish Sinha
PS : reward points if helpful

Creating selection field for a table

hi all,
i want to create a table with n numbr of fields and it is mentioned that i need to create selection parameters with some fileds, how can i do this?
thanks,
Poonam

Poonam Naik wrote :
what is SCN?
SAP COMMUNITY NETWORK

New ipad mini retina cannot select "never" for time out period. It makes the product useless for such things as navigation and frustrating for reading

Must add the never option to the time out period or the product is useless for navigation and other purposes where continual use is required.

This should be an option in the General settings on your iPad. The option is called Auto-Lock. There should be the following options: 2 minutes, 5 minutes, 10 minutes, 15 minutes, and Never.
If you select Never, that should stop the screen from going to sleep automatically. If the Never option is not present, you more than likely have a Exchange account synced with the device that does not allow that option. If that account is disabled, that option should show.
 Cheers, Tom

SO cannot be deleted for Calculated Cost

In Sales Order Product Costing when i am trying to delete my SO, system dosen't allow me to do the same (although i know that SO is a legal document and deletion is not advisable under best practices but still my requirement is like that).
In the Pricing Procedure the Actual Cost EK01 is coming after i am doing the costing.
Can anyone tell me how to tackle this scenario.
Regards,
N

Dear Friend...
If you want to delete the SO then I think you need to delete all the dependencies of the cost accounting.
Delete the Condition type line iTems of Cost condition type and other cost related scenerios from the SO.
then try deleting the same.
I hope you will be able to delete the same.
regards,
Amlan Sarkar

Cannot select fields for calculation

Similar Messages

Maybe you are looking for