Cannot select proper domain for group services

Hello-
I have a working LDAP/Mail/WWW setup with all OS X servers. I'm trying to setup group services (mailing lists in particular) on our domain. I have created a group, when when I go to the "Enable the following services for this group on" dropdown, I don't see the domain I'm looking for. I see all kinds of other ones (about 50) that we do web hosting for.
Anyone know why I can't see my domain?

After more oddities, I believe to have it fixed.
Deleting and re-creating the Sites in ServerAdmin did make the hosted sites selectable as wiki servers, however the choice didn't stick.
The system log gave me this at every save operation in the Web Services Module in ServerAdmin:
<pre>servermgr_web: Failure saving group services update</pre>
I believe the Global UID of the webservices in the server's apple-serviceinfo LDAP attribute was never updated from a move of the server to newer hardware and an OD merge operation.
I am not sure which of my actions lead to success and I am not free to experiment, but here is what I did:
Upgraded apache from v.1.3 to v.2.2 in the WebServices Module
Located the apple-serviceinfo attribute for the $FQDN using Inspector in WorkGroupManager
located a custom port assignment (8008 for an old virtualhost) and changed it to 80
deleted all virtualhosts in ServerAdmin
recreated all virtualhosts in ServerAdmin using FQDN in servername and description
enabled Collaboration Services on all virtualhosts
Re-enabled the new virtualhosts as wikiservers for their respective groups
The auto-created GUID (global identifier) of the server is:
<pre>1F72EE26-32FA-4DC4-921D-13561C188C63</pre>
The auto-created GUID (global identifier) in the server's serviceinfo entry (part of section for virtualhost shown) is now:
<pre>
<key>9EC33DDF-FDEG-4444-8090-B8B559EE2042</key>
<dict>
<key>hostDescription</key>
<string>server.domain.net</string>
<key>hostDetails</key>
</pre>
This corresponds exactly to one ServicesLocator entry of that group:
<pre>1F72EE26-32FA-4DC4-921D-13561C188C63:9EC33DDF-FDEG-4444-8090-B8B559EE2042:w iki
ServerGUID:VirtualhostGUID:servicename</pre>

Similar Messages

Cannot select Wiki server for Group in 10.5.8 WGM

I have a server with a number of wikis that were created under the server's main site, i.e. apache virtual host (i.e.: fqdn of the server).
In addition, I had one wiki that was created under a second site (virtualhost) in order to hide it from the publicly accessible list of available wikis under 10.5.x (http://server.domain.com/groups/).
This wiki does still exist - the folder and wiki pages are all there under /Library/Collaboration/Groups/ but it won't show up under its own site or the main site.
In addition, when I select a site as the collaboration server for a particular group inside WorkGroupManager, my selection doesn't stick - the servername is greyed out. However working wiki groups will continue to work, but I cannot re-bind that single wiki group to its site.
I know there are some changes in 10.5.8, probably in transition to 10.6 server, regarding the usage of the ServiceLocactor LDAP group attribute. I don't think I have seen a similar problem in OSXS 10.5.7 or earlier. Has anyone else run into this?

After more oddities, I believe to have it fixed.
Deleting and re-creating the Sites in ServerAdmin did make the hosted sites selectable as wiki servers, however the choice didn't stick.
The system log gave me this at every save operation in the Web Services Module in ServerAdmin:
<pre>servermgr_web: Failure saving group services update</pre>
I believe the Global UID of the webservices in the server's apple-serviceinfo LDAP attribute was never updated from a move of the server to newer hardware and an OD merge operation.
I am not sure which of my actions lead to success and I am not free to experiment, but here is what I did:
Upgraded apache from v.1.3 to v.2.2 in the WebServices Module
Located the apple-serviceinfo attribute for the $FQDN using Inspector in WorkGroupManager
located a custom port assignment (8008 for an old virtualhost) and changed it to 80
deleted all virtualhosts in ServerAdmin
recreated all virtualhosts in ServerAdmin using FQDN in servername and description
enabled Collaboration Services on all virtualhosts
Re-enabled the new virtualhosts as wikiservers for their respective groups
The auto-created GUID (global identifier) of the server is:
<pre>1F72EE26-32FA-4DC4-921D-13561C188C63</pre>
The auto-created GUID (global identifier) in the server's serviceinfo entry (part of section for virtualhost shown) is now:
<pre>
<key>9EC33DDF-FDEG-4444-8090-B8B559EE2042</key>
<dict>
<key>hostDescription</key>
<string>server.domain.net</string>
<key>hostDetails</key>
</pre>
This corresponds exactly to one ServicesLocator entry of that group:
<pre>1F72EE26-32FA-4DC4-921D-13561C188C63:9EC33DDF-FDEG-4444-8090-B8B559EE2042:w iki
ServerGUID:VirtualhostGUID:servicename</pre>

Proxy Service giving "Cannot Compute Effective WSDL for: Proxy Service"

Hi,
After updating the wsdl and schema, our proxy service is complaining with error : "Cannot Compute Effective WSDL for: Proxy Service " <ProxyService_Location_Name> when I launch a test console or access the Proxy Endpoint on IE.
Proxy and Business Services are pointing to the same WSDL. From Business Service, I am able to launch the test console. . Before updating the wsdl and schema, it was working fine. We tried to check in JDeveloper to see whether there are any issues with WSDL or Schema, but they are working fine.
Security Settings on Proxy Service are : Basic Authentication, User-Name Token Policy and also applied Transport Access Control. Security worked fine earlier before update.
From log file :
Root cause of ServletException.
java.io.IOException: Can not compute effective WSDL for : ProxyService ********
at com.bea.wli.sb.transports.http.ResourceRequestProcessor.securedInvoke(ResourceRequestProcessor.java:93)
at com.bea.wli.sb.transports.http.ResourceRequestProcessor.process(ResourceRequestProcessor.java:65)
at com.bea.wli.sb.transports.http.generic.RequestHelperBase.handleMetadataRequest(RequestHelperBase.java:181)
at com.bea.wli.sb.transports.http.generic.RequestHelperBase.service(RequestHelperBase.java:83)
at com.bea.wli.sb.transports.http.wls.HttpTransportServlet.service(HttpTransportServlet.java:127)
at weblogic.servlet.FutureResponseServlet.service(FutureResponseServlet.java:24)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
Any suggestions/ideas on why this error is happening is much appreciated.
Thanks,
Srithi

There must be definitely some issue in the Policy Configuration, due to which it is not able to Compute Effective WSDL.
Can you please do the following and capture the logs:
- set the transports debug flag to true in the alsbdebug.xml in your domain directory :
<java:alsb-transports-debug>true</java:alsb-transports-debug>
<java:alsb-service-security-manager-debug>true</java:alsb-service-security-manager-debug>
<java:alsb-service-validation-debug>true</java:alsb-service-validation-debug>
<java:alsb-wspolicy-repository-debug>true</java:alsb-wspolicy-repository-debug>
- set the WLS log level to debug
- Then restart the servers
This should give some additional details on the specific error.
It is considered good etiquette to reward answerers with points (as "helpful" - 5 pts - or "correct" - 10pts).
https://forums.oracle.com/forums/ann.jspa?annID=893

You cannot select more than 3 groups [Message 1030-3]

Hello everyone,
I'm having a problem is SAP B1.
I don't know how but a client manage to set 4 fields from List of Item as a group as you can see by this image.
The problem is that when we try the uncheck the fields we receive the message "You cannot select more than 3 groups [Message 1030-3]", even when we uncheck all fields or even when we try to restore defaults. The version of SAP is 9.0 PL00. Could you help me please? Thank you very much.
Thanks and Best Regards,
Dong Pham Nhat

Hi,
Please raise ticket to SAP support. Same thing we already discussed for 8.82 version also.
Check this thread http://scn.sap.com/thread/3400153
Thanks & Regards,
Nagarajan

Cannot select ok button for icloud backup popup stating "This ipad hasn't backed up in 8 weeks."

I cannot select ok button for icloud backup popup stating "This ipad hasn't backed up in 8 weeks. Backups happen when this ipad is plugged in, locked and connected to Wi-Fi"

Reset it by holding the power and home buttons at the same time until you see the Apple logo, then release. You won't lose any data by doing this.

After LDAP failure rebuild I cannot turn on Wiki for group

Our LDAP database died today so I converted the Open Directory Master to Standalone then back to an Open Directory Master and rebuilt our users and groups. No settings were changed in the Web section of the server. But now I cannot choose anything from WorkGroup Manager -> (Group) -> Basic -> Enable the following services for this group on: It only offers me "(None)" and not our site.
I removed the site from the Web settings and made a new one, still the same behavior.
I feel like I'm missing something obvious, can anyone point me in the right direction?
OS X Server version 10.5.6

Hi,
If you rebuilt the LDAP and ensured the UIDs are the same for groups as before, it seems rebuilding the connection with web service is not complete.
I have had to do the following after some upgrades:
If you have your groups listed in the website under Web Services /Services for Groups then remove them, restart web service (or teams), reinstall the groups in the Services for Groups and again restart web service. Then Enable the services for each group in WGM.
HTH,
Harry

You Cannot select assembly order for deletion error with BAPI_SALESORDER_CAHNGE after EHP6 upgrade

Hi All,
We are using Z transaction to update Wbs element data to sales order line item through BAPI_SALESORDER_CHANGE. After EHP6 upgrade while updating Wbs element data to old sales orders(Created before EHP6 upgrade) we are getting You cannot select assembly order < order number> for deletion (V1 748) error in BAPI return table, For multiple Sales order run.
But if we run the same order individually it is getting processed successfully. W e are passing the same values in individual and multiple case.
We debugged the BAPI and found one more error related to Authorization, But BAPI return table is giving different error (V1 748)message. Please help us in finding the issue.

Hi Sujay..
Please check.
http://help.sap.com/saphelp_47x200/helpdata/en/b7/58c4c87e0811d2b66a0000e82d8bd1/frameset.htm

Cannot select iTunes videos for sync with Sony Bridge for Mac version 3.6

Hi,
I have a Sony xperia T.
I am running Sony Bridge for Mac version 3.6 (the latest I think)
I would like to sync a couple of movies to my phone so I can take them with me when travelling, but the itunes library movies are "greyed out" and I cannot select them to enable them to sync.
I cannot see why.
Also some of my music is the same - some albums are "greyed out" and cannot be selected.
Anyone else seen this and worled out the solution ?
if so - please advise !
Hewey

They are probably DRM protected, if so, you wont be able to transfer them
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Cannot select search suggestions for Google search

Firefox 4- Cannot select any item to search in Google from search history drop dwon box, must enter new search every time

Do a malware check with some malware scanning programs on the Windows computer. 
Please scan with all programs because each program detects different malware.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: Home Page: http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*http://support.kaspersky.com/viruses/solutions?qid=208280684
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

Cannot select the updating of Adobe services

Cannot select the updating of Adobe services

Assuming your context structure is
Document (cardinality 1-1)
Files (cardinality 0-n)
FileKeyWord (cardinality 0-n, singleton=false)
searchText (attribute, string)
This should give you what you need:
IFilesElement file = wdContext.currentFilesElement();
for (int i = 0, n = file.nodeFileKeyWord().size(); i < n; ++i)
IFileKeyWordElement e = file.nodeFileKeyWord().getFileKeyWordElementAt(i);
String searchText = e.getSearchText();
Armin

Cannot select proper root folder for new DW site in DW CS6

Hi,
I'm new to Dreamweaver and am trying to set up a new DW site to do a tutorial.   I am trying to create a new DW site named "Check CS6 Tutorial". The Local site folder defaults to: C:\Users\Pam\Desktop\Unnamed Site 2\ but I don't want that. I browse folders to choose 'c:\dreamweaver' and get the error message:
The root folder you have chosen is the same as the folder for site 'Pam-Test'. This may cause some operations, such as synchronization, to work incorrectly. Proceed anyway?
I keep trying to select the c:\dreamweaver location for my files but keep getting the error message above.

You need to organize your sites in individual folders for DW to function correctly.
Personally, I would create a folder on your desktop called "Websites". Then inside that folder, create another folder called "tutorial site". Set "tutorial site" as your new tutorial site's root folder and put all of the tutorial site's files and folders into it. All of a site's resources need to stay inside that site's root, so all .html, .jpg, .gif, .js, .css, etc.
Any additional sites would then have their own folder created inside the "Websites" folder and that folder would be their site root. All of the files for each individual site needs to stay inside that sites individual root folder. The structure would look like...
Websites
     tutorial site
          all of tutorial site's files
     pam-test
          all pam-test site files
     website 3
          all of website 3's files
     etc...
Here's a video on Defining Sites in DW: GS-01: Defining a new site | Learn Dreamweaver CS5 & CS5.5 | Adobe TV

Cannot select Get Info for multiple tracks

I just updated to Lion 10.7.3 and iTunes 10.6.1 and imported my Leopard iTunes Library. I can Get Info on individual tracks but when I shift select or command select multiple tracks the iTunes window turns gray and nothing can be selected. iTunes just freezes until I press the Escape key. So far, everything else works as expected - the only problem is selecting multiple tracks (which worked fine for me on previous OS and iTunes versions).
I haven't found any reports of similar problems so maybe I'm doing it wrong.
Any suggestions?

I solved my own problem - the last time I used iTunes was on a two monitor system. I still have the second monitor connected but it was turned off and the iTunes Get Info window for MULTIPLE selected items was opening on the second monitor. When I did a Get Info on a single selection, the window appeared on the main monitor normally - behavior which never made me think that multiple items would show up in a different window on the turned off monitor.

Cannot select Airplay Device for Output Audio

I can't select my chosen AirPlay device for Output Device. It shows up as one of the options in the Sound System Preference, the Sound Selector in the Menu Bar or the AirPlay selector in iTunes (version 11.0.1). But, when I select it, it automatically re-selects the built-in speakers. Rebooting is the only way to restore this functionality. Even then, it seems to work for a time, then quits working. This problem has been reported elsewhere with no resolution that I'm aware of. Any ideas?

Every get an answer to this?

Cannot select line in for recording

I am trying to use Adobe Audition on windows xp media center edition (because their too stupid to make it for mac) through boot camp. i installed all the drivers and can record using the built in mic, but there is no way to select the line in.
lets get the obvious out of the way
i tried selecting different input in audio properties. there is only one choice and this is "cirrus hd audior" or something like that
i tried plugging in a mic to see if that would override the built in mic and it didnt
if anyone has any idea how to fix this it would be greatly appreciated

any ideas??

Cannot select base station for iBookG4

I have tried to trouble shoot this for more than an hour and cannot do this simple step to get started on setting up Airport Extreme for the first time. Any suggestions for this luddite. Thank you.

I've checked the Airport Help notes for the 5th time re fixing the Airport Utility. The instructions don't match the options I actually have but I'm going to try one more thing. This means I need to disconnect from the Internet, so I will check for responses later. Hopefully, I will not mess up my existing DSL setting and be unable even to check back here. Thank you anyone.

Cannot select proper domain for group services

Similar Messages

Maybe you are looking for