Cannot select Transactions in Print Invoices

Hi,
I wonder if anyone can help me with a problem we are facing when trying to Print Selected Invoices in AR.
We have transactions created with print statuses set to PRINT. However, when we navigate to Print Documents > Invoices > and select Single Request for Invoice Print Selected Invoices....we cannot select Transaction Number Low or High....the message we get is "No entries found for List Of Values"
On metalink, it mentions that setting the print option to PRINT will make the transactions available for selection but this is not the case in our situation, as all our transactions are set to Print.
For info, the version of Oracle is 12.0.6
Regards,
Anil

Did you realize you posted your question in probably wrong forum? This forum is for Oracle Application Server. You might want to post this question in one of EBS forum here:
http://forums.oracle.com/forums/category.jspa?categoryID=3

Similar Messages

  • Printer install, test print ok, will not print anything else, cannot select as default printer

    Printer installs fine, test pages, alignment pages, colour print pages all test fine, they are selected to print from the option on control panel. Trying to print from any other program, the printer is not listed as an option. Going through control panel, try selecting it as default printer, following messge given :
    Operation could not be completed (error 0x00000709). Double check the printer name and make sure the printer is connected to the network.
    Printer connected via USB direct to my single laptop. Uninstalled and re installed, as per troubleshooting instuctions. Ran troubleshooting program and HP print and scan doctor.  Only info given was that it was not default printer, when asked to fix the problem it states it cannot.
    Had a previous HP printer scanner, all removed (it broke, hence the new one), never had a problem with the install, this new one is being a real pain, any help would be appreciated

    Hello again mattcpx ,
    I think what we are going to need to do is start right from scratch.  Seeing that the only printer listed is generic printer icon from Windows 7(This icon does nothing for the printer you have installed), we are going to uninstall your printer and do a proper re install.
    Lets start off by removing the usb cable from both the printer and from the computer and leave it disconnected until further notice. 
    The first link I have for you gives detailed instructions for Uninstalling the Printer Software.
    Once the uninstall is complete, please reboot the computer so that the changes take affect.
    When the computer is back on, disable any firewalls or anti virus protection that you may have running.
    Please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
    Do a power cycle on the printer with the use of the on/off button.  This will do a semi power reset on the printer.
    The next step that we are going to take is to download and save the HP Officejet 4630 e-All-in-One Printer series Full Feature Software and Drivers to the desktop of the computer.  This will create a new icon on the computer and make the download easy to find.
    Double click on the new icon and follow the installation instructions.  The installation will prompt you when to connect the usb cable so please do NOT connect it before hand.
    Let me know how you make out.
    If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
    Cheers, 
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • I do not see print dialog when I click File Print and thus cannot select a different printer from previous printing.

    When I click File Print, no dialog appears. Instead, printing starts immediately so, I don't get to select a printer. At some point in the distant past (with a previous version of Firefox, maybe), the dialog must have appeared I must have chosen the Office Onenote printer. Now, whenever I print a web page, Firefox always uses that printer.
    I can change to another printer by editing the config file but, I have to do that every time I want to change printers. That's a bit cumbersome. Is there any way to force the print dialog to open when I click File Print so that I can chose a printer that way?
    I am using Firefox 3.6.3 with Windows XP SP3.
    Thanks for you help.
    == This happened ==
    Every time Firefox opened
    == I don't recall exactly.

    I was having this issue, first when trying to "Run" and then after saving the exe and trying from the desktop.
    To solve it, I simply right-clicked the exe and clicked Run As Administrator. Its installing as I type.

  • I have an iPad 2.  I can't select any air printer in my scoop network.  Does it matter it is a toshiba printer?

    I have an iPad 2 and cannot select any air printer on my school network.  Does it matter it is a toshiba printer?

    There are no toshiba printers supported in airprint at this time, sorry
    http://support.apple.com/kb/ht4356

  • HP Officejet Pro 8600 - Cannot select color printing in settings

    I selected grayscale printing.  Now I want to print in color and cannot find how to print in color.  Option not found.

    Here's an answer - it might not match your setup though:
    OS: Windows 8.1
    Print Driver: HP Officejet Pro Full Feature Software and Driver, 2012-10-22 , Version28.8
    Bring up the HP Officejet Pro 8600 software and select Set Preferences under Print:
    Then on the Printing Prefrences dialog, press the Advanced button:
    And then on the Advanced Options dialog, turn off the option under Printer Features for Print in Grayscale:
    Hopefully that helps.
    -Seth

  • I have a new MacBook Pro with OS10.8.2 and cannot get Contacts to print a list of addresses with pictures showing.  There is a check box selecting "picture" which has been checked - but no picture.  This worked fine on OS10.7.5.  Problem??

    I have a new MacBook Pro with OS10.8.2 and cannot get Contacts to print a list of addresses with pictures showing.  There is a check box selecting "picture" which has been checked - but no picture.  This worked fine on OS10.7.5.  Problem??

    First, back up all data immediately, as your boot drive might be failing.
    There are a few other possible causes of generalized slow performance that you can rule out easily.
    Reset the System Management Controller.
    If you have many image or video files on the Desktop with preview icons, move them to another folder.
    If applicable, uncheck all boxes in the iCloud preference pane.
    Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
    Check your keychains in Keychain Access for excessively duplicated items.
    If you have more than one user account, you must be logged in as an administrator to carry out this step.
    Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

  • I will try to print from word to the Adobe printer.  Sometimes it just freezes.  I cannot select another printer.

    I will try to print from word to the Adobe printer.  Sometimes it just freezes.  I cannot select another printer.  It’s like all my printers are gone.  Sometimes I get an “Unable to Connect” error and sometimes I get “1 document in printer queue”.  No matter what printer I choose after I try to go to Adobe, I cannot connect to a printer.  The only solution I have come up with is a clean reboot which I can't afford to do 4-5 times a day.
    Currently on Acrobat XI Pro 11.0.09

    Hi Tymuls,
    The first step I would try is delete the Adobe pdf printer and then repair Acrobat.
    Repairing Acrobat will bring back the pdf printer. We released an update yesterday i.e. 11.0.10. try updating to the latest version and check.
    Have you tried uninstalling the software and reinstalling it.
    You might also want to check the performance in a new admin user account.
    Regards,
    Rave

  • Is CS5 extended compatible with Epson products? I cannot select printer settings.

    I've had this problem for a very long time with multiple Epson printers. This problem only applies to Adobe products as other image editing software work fine. The printer settings button does not work in Photoshop so I cannot select paper type or any of the other settings. Adobe blame the problem on Epson and Epson blame the problem on Adobe but the bottom line is, I'm left holding the bag as I paid a lot of money for these products and they don't work together. At least Epson will answer the phone and try to help. Adobe do "NOTHING" for you! I've been on here before with this problem with my last Epson Printer. It was a Stylus Photo 1270 and I was told by some wise guy that "it was a 13 year old printer, what do I expect." Well I have a brand new Epson R 3000 and I have the same problem. I'm using CS5 Extended and have all the latest drivers. Here is a link talking about this problem but it doesn't give any solution that works for me: Print settings option unavailable in Print dialog box | Photoshop CS5. I've already done everything it says here! Typical of Adobe ducking their head in the sand! I can get the print settings on other applications like Preview (no problem) which Epson claim, proves the problem lies with Adobe. An Adobe tech. told me on here (last year) that the problem was with Epson as they have to write the driver software to the application (Photoshop), yet Epson claim that the problem is not in the driver but in the application itsalf. Adobe will just bury their head in the sand and act like nobody is home!
    Really sick of this crap, neil.

    Thanks for getting back to me Gene. I will give that a try if I continue to have problems, but I have found a workaround solution, or at least discovered a glitch. Like I said, when I click the "Print Settings..." button, it fails to open up a Print Settings window, so I have no way of choosing the paper etc.. However, If I switch it from "Photoshop Manages Colors" to "Printer Manages Colors" and then back again, I can then click the "Print Settings..." button and it will open up a Print Settings window (go figure?). If I were to guess I would put the blame on Adobe's printer interface, not the print drivers from Epson. Like I said, this problem has been haunting me for a while on numerous printers. It's intermittent so sometimes it works alright and I forget about it, then it comes back, but now I may have discovered a workaround.
    Cheers, neil.

  • Cannot select output tray on a stapler stacker using universal print drivers

    With universal print derivers 5.2, we cannot select output tray for print job on a stapler stacker.  All jobs are set to automatic output and only uses the lower tray, not other trays.

    Hi drlake,
    I understand that you are having issues with printing specialty paper/labels after updating your computer. It would be best if you posted your question on the HP Laser jet Commercial Site <here>.
    This would be the best place to find your answer.
    Thank you
    I worked on behalf of HP

  • I cannot select the Paper Size when I try to print with HP Photosmart B110a with Windows 8.1 64bit

    I cannot select the Paper Size when I try to print with HP Photosmart B110a
    The same printer was working OK with my old PC with OS Windows 7
    However I got a new PC with OS Windows 8.1 64bit
    I installed the new driver for HP Photosmart B110a that I dowloaded from HP site. Driver forWindows 8.1 64bit.
    In addition to not being able to chose the paper size, also when I go to Printer Properties in Options, all the characters are non-ascii.
    Do you know what may be the problem?
    Thank you

    Hello Nanu64,
    Welcome to the HP Forums.
    I see that you are having some issues when attempting to print from your computer.
    I also see that you stated that not all the options are available in the printing preferences options.  This could be because the installation was not complete or it failed.
    I suggest that we do a complete uninstall/ reinstall as well as some additional steps.
    First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
    If you have the printer connected to the computer with a usb cable, please remove the cable from both ends and leave it disconnected until further notice.
    The next link that I have for you will give you detailed instructions for Uninstalling the Printer Software.  Once the uninstall is complete, reboot the computer so that the changes take affect.
    When the computer is back up and running, please disable any firewalls or anti virus protection you may have running. We don't want anything getting in the way of the reinstall.
    The following download is the HP Photosmart Full Feature Software and Drivers.  Save this download to the desktop of the computer so that it creates its own icon.  This will make it easy for us to find when the download is complete.
    Double click the new icon and follow the installation instructions.  The installation will give you connection options (Wireless , usb or Ethernet), if connecting usb, please wait for the prompt to connect the cable.  Connecting the usb cable before hand can cause an issue with the installation.
    If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
    Thanks for your time.
    Cheers,  
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • After v4.0 upgrade I cannot select "Printing Preferences"

    Recently I upgraded to V4.0. When I try to print an email or a web page I cannot select "Preferences" to modify print quality or color options. A message appears: Can not load library "LXBCPRP.DLL" Using Defaults Error 126 XP sp3. Lexmark Z605 Always worked with V3.x Still works on rest of system. After reading this forum I reset ALL printer items, upgraded and reinstalled printer drivers and other similar fixes from forum. All to no avail. Please help! Thanks in advance.

    Thanks for your reply. And thanks to all who took the time to help.
    The solution I came up with was to buy a new printer. The main problem appeared to be that all Lexmark drivers available would not work on 64bit systems nor Win7 nor ver 4.x. Lexmark Vista drivers partly worked.
    I found more issues when I upgraded to ver5.x a few weeks ago. but I found an add-on to help. It is "'''add-on compatability reporter 0.8.6'''". I did not go back to the old Lexmark printer, which is happy on an older XP machine.
    The add-on may have worked, but I didn't try as all my systems are running well using the add-on. If you D/L it and try it, I had a learning curve problem with it's install and use. Follow the directions carefully and be prepared to have odd results, but finally after install, it worked to perfection.
    I hope this helps those who still are having problems, and another thanks to all who helped me.

  • I previously used Indesign CS4. I now have recently purchased Indesign CC. I have a Mac Yosemite 10.10.3. When I print, I cannot select my paper stock, other than what is in the print dialogue box, i.e. art paper. In Indesign CS4, I could choose fine art

    previously used Indesign CS4. I now have recently purchased Indesign CC. I have a Mac Yosemite 10.10.3. When I print, I cannot select my paper stock, other than what is in the print dialogue box, i.e. art paper. In Indesign CS4, I could choose fine art paper etc. Where can I find this option in this new version?

    With Snow Leopard, the Printing of PDFs has changed. Try using the highlighted option

  • When I log into hotmail, I cannot select part of an e-mail and print just the selection. This will work with other borowsers.

    I can print an entire e-mail when I log into Hotmail using Firefox, but if I select part of the e-mail and tell the printer to print the selected part, all I get is a blank page coming from the printer.
    I can print the selected text if I use Internet Exlporer as a browser to log into Hotmail.

    Hi,
    My dad told me he had this 'no selection' problem when he wanted to print out a selection in Hotmail, so I had a hunt around, but didn't find a definitive solution.
    So, I have done some playing around, and have come up with this solution which works if you want to print out a selection in Hotmail (using firefox), but it is now greyed out.
    It seems to be connected with the way that Hotmail handles frames.
    (Thought I would post it as posts like this have helped me a ton in the past :0))
    '''To print a selection in hotmail you need to do this.'''
    1/ On the email you want to print click the small Printer icon in the hotmail menu.
    There is no need to highlight a selection at this stage because the email is in a frame, so it will do no good anyway.
    2/ A new page will open up and the printer dialog box will open up.
    Close the printer dialog box.
    3/ Highlight the text selection that you want to print on that page.
    4/ Press Ctrl-P on the keyboard.
    5/ The printer dialog box will now pop up again and you will be able to choose 'Selection'
    Your selection will now print.

  • APP-SQLAP-10380: You cannot select this payment document

    User did a quick payment. When the check failed to print user voided the check and tried to reprint. Now when the user is trying to reissue the check they are getting the following: APP-SQLAP-10380: You cannot select this payment document because it is in use by another payment batch.
    I went through Metalink and found this article: R11i: Quick Payment For EFT Payments Will Not Release The Document To Pay Other Invoices [ID 158828.1]
    A query in the metalink article stated that "If this query returns rows then contact oracle support for a data fix."
    The query did return rows. However, this is rather urgent and I am unsure as to when Oracle Support will get back to me. I made a Sev 2 SR for this. I was wondering if there was any front end things I could do to clear this payment batch so I could reissue a check?
    Any help would be appreciated.
    Thanks

    Please see these docs.
    R11i: SEPA: AFTER PATCH 6741280, QUICK PAYMENTS ERROR APP-SQLAP-10380 [ID 1060865.1]
    App-Sqlap-10380 You cannot select this payment document payment batch formated [ID 309655.1]
    APP-SQLAP-10380: You Cannot Select This Payment Document Because it is in Use by Another Payment Batch [ID 1335053.1]
    R11i / R12: FAQ for Single European Payments (SEPA) [ID 791226.1]
    APXPAWKB After Using NL Payment Format For Quick Payments, Payment Format Cannot Be Used Anymore [ID 250332.1]
    Unable To Enter Quickcheck For Polish Eft Formats [ID 397791.1]
    Thanks,
    Hussein

  • Auto print invoice with delivery notes

    I am trying to find a way when we print invoices to have it print the matching delivery note as well.  Currently as you are aware you have to do the process in a separate manner which is not satisfactory for us.
    Thank you in advance,
    Chad

    hello,
    at present,it is not possible to create print flows such printing the delivery note with the invoice etc when you using the internal layout edtitor PLD. As a workaround you could use the Document Printing Option(Sales -A/R / Document Printing) to print a Selection of Documents.

Maybe you are looking for