Cannot Update HP TOTAL CARE SETUP

Hi there, A little while ago I was reccommended to upgrade to Windows 7 Home Premium or Ultimate by one of my friends.
I have had my computer for some time and I would like to Upgrade it a bit.
I was told to use Windows 7 Upgrade Advisor to make sure I was compatible before switching.
I scanned to see if my computer was compatible and It was except for one negative point. I had to update my HP Total Care Setup.
It had a link which could update it but when I went there it only showed me the Microsoft front page.
There is no way I can update and I have been trying to find an answer ALL morning.
System Specs
Model : s3734uk
Processor : AMD Athlon(tm) Dual Core Processor 4450e 2.30Ghz
System Type : 32-bit Operating System
Monitor - HP w1907v
Manufacturer - Hewlett- Packard Compant
Thank you for your support :-)

OpTicGaming
Welcome to the HP Community Forum.
Total Care is the old name / version / program for the HP Support Assistant.
No worries. Just remove the old Software from the computer and you can install the new program later after the Update / Upgrade.
HP Support Assistant
If you have ‘Admin’ control, you may highlight the package and “double-click” to install it, else Right-Click, Select run as Administrator and install.
=============================================================================
You want to make sure you have your network drivers and the like. You might download your most critical drivers ahead of time and make sure you have them about - perhaps on a USB drive.
HP Pavilion Slimline s3734uk Desktop PC
Click the Kudos Thumbs-Up to show you appreciate the help.
Click Accept as Solution when the Answer provides a Fix or Workaround!
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Kind Regards,
Dragon-Fur

Similar Messages

Cannot update Video Driver on Satellite L675

Hi all!
I have problem i bought 675 like 7 months ago for 1099. Since it was the top "gaming" laptop and as time pass i updated my Bios. Since then everything going wrong and i updated my Bios like half year ago after 1 month when i bought laptop.
Like i sayed, as the time passed i start geting like lag spikes if i watch videos, playing games, lisening music.
It put like frezze noise, like pc frezes for 2sec and squiks realy anoying.
Don't know how to fix.
I guess its problem of procesor i5 or cuz bios.
Then when i tryed to updated my Display driver there is no freaking way to updated its just mission impossible.
Toshiba didn't care a bit to make updated drivers for costumers even if i tryed to download it from AMD official site.
It says cannot updated driver since its not suported and it says that i go to toshiba website for new drivers and there are no new drivers for my pc.
So i stucked and new games need new drivers like few games dont wana start cuz i dont have updated my drivers.
Its ridicules.
I hope that u will be able to help me up with my drivers to update. If not... oh well altest i know why not to buy another toshiba laptop if they dont care about costumers.
Thanks and sry for my bad english.
0101 - Operating System : Windows 7 Home Premium 32-bit (6.1, Build 7600) (7600.win7_gdr.120305-1504)
0102 - Language : Slovenian (Regional Setting: Slovenian)
0103 - BIOS : InsydeH2O Version 2.40
0104 - Processor : Intel(R) Core(TM) i5 CPU M 460 @ 2.53GHz (4 CPUs), ~2.5GHz
0105 - Memory : 4096MB RAM
0106 - Available OS Memory : 3958MB RAM
0107 - Page File : 2612MB used, 5301MB available
0108 - Windows Dir : C:\Windows
0109 - DirectX Version : DirectX 11
0110 - DX Setup Parameters : Not found
0111 - User DPI Setting : Using System DPI
0112 - System DPI Setting : 96 DPI (100 percent)
0113 - DWM DPI Scaling : Disabled
0114 - DxDiag Version : 6.01.7600.16385
02 - Processor
0201 - Caption : Intel(R) Core(TM) i5 CPU M 460 @ 2.53GHz x4 ~2534MHz
0202 - CurrentClockSpeed : 1190MHz
0203 - L3 Cache : 3,00 MB
0204 - L1 Cache : 32,00 KB
0205 - L2 Cache : 256,00 KB
03 - Video Adapter
0301 - Card Name : ATI Mobility Radeon HD 5650
0302 - Manufacturer : ATI Technologies Inc.
0303 - Chip Type : ATI display adapter (0x68C1)
0304 - DAC Type : Internal DAC(400MHz)
0305 - Device Key : Enum\PCI\VEN_1002&DEV_68C1&SUBSYS_FD121179&REV_00
0306 - Display Memory : 2737 MB
0307 - AdapterRAM : 1,00 GB

The only thing that i think of is to find newer drivers from other satellite laptops with similar graphic card.
I searched a bit and find [those|http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp].
Select Satellite C Series:
C660
Display Driver
ATI
Windows 7 - 32 Bit
8.783.3
C850
10/05/12
Display Driver
AMD
Windows 7 - 32 Bit
8.932.5.3
You can also try downloading 64 bit drivers. There is a possibility that they include 32 bit as well.
C670D
Display Driver
ATI
Windows 7 - 64 Bit
8.812.2.2
Satellite L Series:
L750D
Display Driver
AMD
Windows 7 - 64 Bit
8.911.6
It's a longshot, but you can try.

"Mail cannot update your mailboxes because your home directory is full"

I have a 250 GB hard disk, 4.34 GB of which is in my "Home" folder. (Total HD usage is about 27 GB.) This happened suddenly after Mail had been working fine for eons. I deleted a bunch of files (107 MB) in a "Drafts" folder (none show up in the Mail app's "Drafts" icon), but it made no difference. I re-installed the Mac OS X 10.4.11 combo update... no difference. Mail version is 2.1.3.
Any help here? I cannot use Mail at all.
Message was edited by: Bill Strohm

Hey there,
Have you had a chance to look at this Apple support document relating directly to this issue. Hope it helps.
[Mac OS X 10.4: "Mail cannot update your mailboxes because your home directory is full" alert|http://support.apple.com/kb/TA24486?viewlocale=en_US]
B-rock

I did not authorize 2 in app purchases and because my credit card is at its limit, and i dont know how to reverse the in app purchases, i cannot update any app or do just about anything in the appstore or itunes store. I paid for apps, i demand my updates

I did not authorize 2 in app purchases and because my credit card is at its limit, and i dont know how to reverse the in app purchases, i cannot update any app or do just about anything in the appstore or itunes store. I dont care if i owe apple's itunes appstore a few dollars over 2 in app purchases i never meant to download in fact the whole app itself i wanted to delete...but out of the hundreds (maybe lower thousands) fof dollars in music and apps and whatever else, that i rightfully purchased over the passed couple of years....should *NOT* have the upgrades and/or previous purchased songs withheld from me over $3 in accidently purchased add ons through an existing app i deleted an disliked anyway

Same thing happened to me with my peruvian credit card in the peruvian app store, I want to buy an app, but it says that my credit card is "not supported in the Peruvian app store"

Cannot Update Decimal Places in General Settings

When I try to update the decimal points in the Administration > System Initialization > General Settings > Display path, SAP B1 gives me the following error:
"Cannot update while another user is connected to the company."
I am the only one on the system as "manager" with "Super User" and "Full Authorization"...
The SAP B1 Guide titled "How to Make Initial Setting in Business One - US" says "you can change these settings at any time".
QUESTION: What might be stopping this change, and more importantly, how do I get around this error to be able to change the decimal points?
Thanks all - Zal

Hi Zal,
I agree with you about the strange messaging used by SAP.
But blocking the possibility to decrease the decimal places is extremely important.
Suppose you have inserted a sales document with two items in this way:
Item 1 ___Qty 1,234 ___Unit price 1,22 ___Line total 1,51
Item 2 ___Qty 5,756 ___Unit price 3,15 ___Line total 18,13
____Document total 19,64
Then, someone wants to change the number of decimal places of the quantity from 3 to 2.
What happens would be:
Item 1 ___Qty 1,23 ___Unit price 1,22 ___Line total 1,51
Item 2 ___Qty 5,75 ___Unit price 3,15 ___Line total 18,13
____Document total 19,64
If you try to do the calculations manually you will see that the results are not correct. In fact all the document would have to change in:
Item 1 ___Qty 1,23 ___Unit price 1,22 ___Line total 1,50
Item 2 ___Qty 5,75 ___Unit price 3,15 ___Line total 18,11
____Document total 19,61
Also if the document total will show correct (in the case of rounding the second decimal position of item 2), the totals of any line is wrong. In fact there is no recalculation at all in SAP (and must not be done).
Imagine such a modification over thousand of documents and all of the descendants (mainly if the have lead to printouts - as say confirmations - sent to customers or vendors).
None of the economic figures will match.
BR
Antonio

HT4484 My email was phished, so I deleted it and changed it completely. Now all the apps that I downloaded with the old email cannot update because I cannot log into that email. Mountain Lion is compatible with the new updated iPhoto. what can I do?

My email address was phished and I had to delete it completely. That was the one I used to download all my original apps on my computer. I have since changed to a new address, but since my apps were under the old one, I cannot update them without logging into the old address. It no longer exists....so how do I fix this?
Some of the apps I don't really care about updating but, I did download the new Mountain Lion and it wants to update my iphots and I can't do it.
Any help will be appreciated! Thanks!

Hi joaroa,
When you say you deleted your email and changed it completely, those are actually two different things, and it sounds like you are talking about your Apple ID, not just your email, (because you speak of making purchases with it).
If you changed your Apple ID (preferred, How to change the name you use for your Apple ID), then you would not have another Apple ID and all of your purchases would still be with your only Apple ID, it would just be renamed to your new email address.
If you instead created a new Apple ID (with a different email address) then of course you have two different Apple IDs and the old one still exists and is probably active. Just because you may not use an email address anymore, that doesn't mean an Apple ID of the same name is inactive, Apple IDs aren't deleted. If you start purchasing Apps with your new Apple ID, it can really cause confusion because, as you see, you need to be logged into the Apple ID that purchased an App to update it. It would be best to stick with one Apple ID for purchases, probably the one you have spent the most money with. Remember, unless it's an @mac or @me Apple ID you can rename them rather than creating yet another Apple ID. Since Apple IDs can't be merged or deleted, creating more can be a messy.
If you don't remember what the password is for a particular Apple ID, you can visit iforgot.apple.com where you can reset it, the AppleConnect password. If the Apple ID is no longer a valid email address, you can use the security question method to reset the password instead.
Unless you have made a lot of purchases with your new Apple ID, I'd recommend moving back into your old one, especially if that has the most or the most expensive apps with it. If your new Apple ID is the "name/email" you want to use, you could rename the new one to a secondary email, then rename your old Apple ID to your preferred name/email. Basically, rename the new one to something else which frees up that name (email) to rename your old Apple ID. Thus your old Apple ID has the new name. See My Apple ID. The "Manage your account" link is where you can rename the ID itself.
Sorry about getting long winded here, but it's important to keep as few Apple IDs as possible, at least when it comes to purchases. If an Apple ID is undesired, rename it rather than creating a new one. It will be much simpler in the long run.
Let us know how it goes.
ivan

Cannot update my ios8.1.1 to 8.2 or the latest update showing in settings.i go thru the process of downloading and after waiting to download it shows download complete and then while installing it says error.what should I do?

HHello...cannot update my iPad 2 to latest version of ios8.12. Shows error after downloading it

Hi Ajit Shah,
Welcome to Apple Support Communities.
It sounds like you’ve run into an issue updating iOS over-the-air on your iPad. Take a look at the article linked below, it provides a lot of great information and troubleshooting tips that’ll generally resolve issues like this one.
Resolve issues with an over-the-air iOS update - Apple Support
Take care,
-Jason

I cannot update my Creative Suite 5 programs. Getting this error..."Adobe Illustrator CS5 15.0.2 Update There was an error downloading this update. Please quit and try again later. Error Code: U43M1D207 Adobe Pixel Bender Toolkit 2.5 Update..."

I cannot update my Creative Suite 5 programs. Getting these error messages...
Adobe Illustrator CS5 15.0.2 Update
There was an error downloading this update. Please quit and try again later. Error Code: U43M1D207
Adobe Pixel Bender Toolkit 2.5 Update
There was an error downloading this update. Please quit and try again later. Error Code: U43M1D207
Adobe Extension Manager CS5 5.0 Update
There was an error downloading this update. Please quit and try again later. Error Code: U43M1D207

@them,
I'm just a user like you who volunteers my time here. Your technical question requires the response from a support engineer.
I do sincerely think you'll get a better response by asking in the Downloading, Installing, Setup forum which I referenced in post #3. They have support engineers who monitor that forum for these kind of issues. This forum can only deal with general issues. Sorry.

I cannot update anything on my imac

Everytime I push "Software Update" in the top left hand corner, I get the mesage: "Software Update cant check for updates because of a network problem. Software cannot connect to the update server." I run through the diagnostics and it comes out saying: "Your Internet connection appears to be working correctly" I cannot update like that and I cannot update through programs such as iTunes. If I open iTunes and click the "Check for Updates" I get the same message. The only way I have kept up with updates is downloading them straight from Apple's site. I downloaded Lion today, thinking this might take care of the issue but it hasnt. What should I do? I have tried this on 4 different internets...

Could be a corrupted preference (.plist file) ...
Go to ~/Library/Preferences.
Move the com.apple.SoftwareUpdate.plist file to the Trash.
~ (Tilde) character represents the Home folder.
For LIon: To find the Home folder in OS X Lion, open the Finder, hold the Option key, and choose Go > Library

Disable the Update Opportunity Totals

Has anyone come up with a way of disabling the "Update Opportunity Totals" button on the Opportunity Page. Without going into detail, under certain circumstances, when our users click the button we come up with incorrect totals. This is due to our implmentation and how we populate the frequency & # of periods, not Oracle.
I looked into trying to add something in the in HTML Head Additions section of the custom web applet, that would disable just this button, but could not come up with anything.
The code that is executed when the button is selected is:
<div tabindex="5" onmouseover="toggleNavButton(this);" onkeypress="onButtonPress(this);" onmouseout="toggleNavButton(this);" class="buttonChildTitleBarTD" onclick="doNavigate('\/OnDemand\/user\/OpportunityDetail?OMTGT=RevenueList&OMCR0=1-19FGQ67&OpptyDetailForm.Id=1-19FGQ67&OMRET0=OpportunityDetail%3focTitle%3dDixie%2bPAS%26OMTGT%3dOpptyDetailForm%26OMTHD%3dOpportunityDetailNav%26ocEdit%3dY%26OpptyDetailForm.Id%3d1-19FGQ67%26OCTYPE%3d%26ocTitleField%3dName&OMCBO=Opportunity&OCTYPE=&OMTHD=UpdateTotals',true, this, null);" id="ProductRevenueChildListTB28508260*1"> Update Opportunity Totals </div>
Any thoughts?

You can't remove the Update opty total button but I had a similar issue, we capture revenue in 2 fields mthly and inital setup and it wouldn't use both and send it to the Opty total so we looked at redesigning it. I have 2 new currency fields and when a record is updated it divides the initial setup by # periods and adds that figure to the monthly figure and puts it in the currency field that displays in related items. The update Opty button then works with the correct numbers. Of course this goes in right after R16 because then I can remove the original Monthly revenue field off the related items section.
cheers
Alex

HP - Supp - Total Care - Forum - Desktop - TouchSmart (TS) - Hrd restart w/out pwr cycle on IQ8xxt-

Greetings,
While the cause for this post is the sole HP TouchSmart (TS) at this computing site, an IQ816t, this post addresses the case, and thus applies to the IQ8xxt and any other similar series case.
Generally, to restart a PC, a user may attempt a soft or execute a hard reboot. A soft reboot may be attempted with the 3-finger salute. A hard reboot is executed with either a power cycle, or, on a traditional case, depressing the Reset/Restart button/switch.
This TS runs mostly Windows Vista SP2 (WinNT6.0.6002SP2). When running this OS, the system hangs periodically. The salute is to no avail. How may a hard restart be executed without a power cycle, similar to depressing the Reset button on a traditional case?
Thank you all in advance.
Best regards,
“kennymccormick”

Greetings,
I was hoping for any knowledgeable response, from either HP or the public.
That a HP staff member responded indicates that HP does allocate resource to monitoring the HP Support Total Care Forums. It must just be that the allocated resource is extremely limited, given that the response was posted almost 7 weeks after the query.
While I should appreciate a response and give thanks, in this case, I simply cannot. I really do not want to come across as a jerk, yet the response was so… <exasperated sigh> In summary, the question was whether a hard restart may be executed on a TS8xxt case system without power cycling, similar to depressing the Reset button on a traditional case. The response provided was to, well, power cycle. That was just unhelpful.
Best regards,
“kennymccormick”

Cannot update songs into ipod, please help.

Hello,
Thank you for your time in advance.
I have updated my iTunes and that is fine. However, I cannot update my iPOD update. There is a message, "iPOD Setup.Exe is not a valid Win 32 application."
I suspect that's why I cannot update my songs. I have tried everything for the last 4 hours, including restoring my ipod and my itunes, to no avail.
Can anyone offer a suggestion?
Thank you.

hmmmmm. it might be a good idea if you do a check through your PC for malware. that message is suspiciously similar to one folks can get as a result of a Pretty Park infection:
You Are Unable to Start a Program with an .exe File Extension
but if the PC seems clean, try downloading a fresh copy of the ipod updater installer. (that message can also sometimes show up if the installer file gets damaged during the download.)

Running 10.7.5, cannot update to Mavericks

Running 10.7.5, downloaded migration assistant, still cannot update to Mavericks!
I go to the app store, log in, and get nothing when I click update. It won't even initiate download.
This has been going on for a week and I just don't know what to make of it,
I even verified my disk and repaired disk permissions....very frustrating.
Please someone, anyone, help.

carlfromky wrote:
Airport Extreme (latest version.)
Do you mean the new, tall ones just released?
Try just re-selecting the drive as the destination.
If that doesn't help, try a hard reset of the Airport per Resetting an AirPort Base Station or Time Capsule FAQ (if you do have the new model, that article may not apply to it. See the Setup Guide that came with it).
If still no help, try a "full reset" of Time Machine, per #A4 in Time Machine - Troubleshooting.

How come I cannot update my iTunes to the latest version?

How come I cannot update my iTunes to the latest version?
Whenever I click the setup icon, nothing happens.
Or when I click "Check for updates" in iTunes, nothing happens too.
Can anyone tell me what's wrong? And what should I do?

Many thanks.
It seems unlikely that McAfee is causing the damage here. But it may be interpreting the installer damage as indicating an unsafe package. (The damage is causing the file to not be properly digitally signed.)
Perhaps try downloading and saving a copy of the installer to a different PC. (If you're on a 32-bit Windows system, try to download on a different 32-bit Windows system.) Copy the iTunesSetup.exe installer to an external hard-drive, or a large-enough thumb drive or burn it to a CD-R. Carry the installer back to your PC, copy the installer to your hard drive. (Don't run the install from the ExHD, thumb or CD-R.) Start the install by doubleclicking the iTunesSetup.exe file.

I purchased from previous owner and cannot update installed software

I purchased my MAC Air from previous owner and cannot update installed software: iphoto, numbers, pages... How may I get access to these software? I am willing to purchase license, if necessary...just do not know what to do.

The first thing you should do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. How you do that depends on the model. Look it up on this page to see what version was originally installed.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc, which you can get from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. I suggest you install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. If you don't have the media, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
Once booted from the disc or in Internet Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive, which is what you should do.
After partitioning, quit Disk Utility and run the OS X Installer. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
You should then run Software Update and install all available system updates from Apple. If you want to upgrade to a major version of OS X newer than 10.6, buy it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Apple customer service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able toauthorize it under your ID. In that case, contact iTunes Support.

Cannot Update HP TOTAL CARE SETUP

Similar Messages

Maybe you are looking for