Cannot update local cache 0

After upgrading to Netweaver7.0 SP15 we started getting these errors messages in the portal defaultTrace logs.
[EXCEPTION]
#1#com.sap.bc.proj.jstartup.sadm.ShmException: Cannot update local cache 0.
        at com.sap.bc.proj.jstartup.sadm.ShmCache.nativeGet(Native Method)
        at com.sap.bc.proj.jstartup.sadm.ShmCache.onGet(ShmCache.java:412)
        at com.sap.engine.core.cache.impl.ShmMonitor.onGet(ShmMonitor.java:114)
        at com.sap.engine.cache.admin.impl.LocalMonitor.onGet(LocalMonitor.java:296)
        at com.sap.engine.cache.core.impl.CacheGroupImpl.get(CacheGroupImpl.java:575)
        at com.sap.engine.cache.core.impl.CacheGroupImpl.get(CacheGroupImpl.java:622)
        at com.sap.ip.bi.base.service.cache.impl.CmlCacheService.get(CmlCacheService.java:227)
It doesn't appear to be a fatal error but it gets logged constantly when users access BI iViews (Bex, Bex Web Analyzer, etc). We've been running like this for a couple of weeks. Last night the server ran out of shared memory. Restarting Oracle and SAP BI cleared up the problem for now. Any number of things could have caused that problem but this error appears to be related to shared memory (ShmCache).
We've been unable to locate any information about this exception. Any help would be greatly appreciated.
Regards,
John

Hi John,
We're getting the same problem.  Were you able to resolve it?
Thanks,
Regards
Mel Calucin
Bentley Systems

Similar Messages

  • Cannot update, repair, uninstall itunes in Windows7-64bit. Have itunes v10.5.0.142 installed but is missing "itunes64.msi" file .  Need copy of itunes64.msi file which is located in the file folder ProgramData\Apple Computer\Installer Cache. Thanks.

    Cannot update, repair, uninstall itunes in Windows 7-64bit.  I have itunes version 10.5.0.142 installed but is missing the "itunes64.msi" file.  Would like to obtain a copy of this file which is located in the file folder ProgramData\Apple Computer\Installer Cache.  If someone could supply a copy of this file on this site, it would really be appreciated.  Thanks in advance. 

    See Troubleshooting issues with iTunes for Windows updates for general advice.
    If you want to install an older version of iTunes see http://support.apple.com/downloads/#itunes or OldApps.com.
    tt2

  • I cannot uninstall itunes from my computer PC. I cannot update itunes on my computer. I get this message." C:\Documents and Settings\Sally-Anne\Local Settings\Application Data\Apple\Apple Software Update\'iTunes.msi' is not a valid installation package

    I cannot uninstall itunes from my computer PC. I cannot update itunes on my computer. I get this message." C:\Documents and Settings\Sally-Anne\Local Settings\Application Data\Apple\Apple Software Update\'iTunes.msi' is not a valid installation package Try to find the installation package itunes.msi in a folder from which you installiTunes."
    I have tried a serach for the file itunes.msi and nothing comes up.
    Help anyone/
    thanks

    I get this message." C:\Documents and Settings\Sally-Anne\Local Settings\Application Data\Apple\Apple Software Update\'iTunes.msi' is not a valid installation package Try to find the installation package itunes.msi in a folder from which you installiTunes."
    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • Cannot open images-get message "Local Cache Denied". How do I fix?

    "Local Cache Denied" - how do I fix this?

    Safari cannot open your page because...: Apple Support Communities

  • Updating sites /old version still in local cache of customers

    Hi,
    when updating sites for customers they and their customers often don't see the update as the site is loaded from their local cache.
    Is there a way to deal with this? It is impossible to change the name of the index-page, it is always index.html.
    Thank you for your help,
    Kurt

    I've faced this before too.
    I've tried many different approaches but the most reliable way I've ever found of handling it is to rename the new PDF each time (e.g. adding the revision date into the filename) and update the link in the web page to point to the renamed PDF.
    Works every time.
    Chris C. 1972 wrote:
    I was told by someone here (and I can't reproduce it in my office) that I should tell the user to go to Adobe Reader | Edit | Preferences | Internet.
    Then tell her to uncheck all three boxes (display in browser, allow fast, and allow speculative)
    But I don't see how that would fix it
    Nor me.

  • Cannot update Adobe Acrobat for Mac from 11.0.0 to 11.0.01

    Hi all. I cannot update my Adobe Acrobat from 11.0.0 to 11.0.01. There's been some error during the installation of the update. I have tried uninstall and reinstall for several times but didn't help. The error log is as follows:
    Feb 27 19:00:22 MYNAME-MBP.local Installer[4256]: @(#)PROGRAM:Install  PROJECT:Install-735
    Feb 27 19:00:22 MYNAME-MBP.local Installer[4256]: @(#)PROGRAM:Installer  PROJECT:Installer-614
    Feb 27 19:00:22 MYNAME-MBP.local Installer[4256]: Hardware: MacBookPro8,1 @ 2.40 GHz (x 4), 8192 MB RAM
    Feb 27 19:00:22 MYNAME-MBP.local Installer[4256]: Running OS Build: Mac OS X 10.8.2 (12C60)
    Feb 27 19:00:22 MYNAME-MBP.local Installer[4256]: Env: PATH=/usr/bin:/bin:/usr/sbin:/sbin
    Feb 27 19:00:22 MYNAME-MBP.local Installer[4256]: Env: TMPDIR=/var/folders/xr/gczqchkx567d6ty6y6rww5sr0000gn/T/
    Feb 27 19:00:22 MYNAME-MBP.local Installer[4256]: Env: SHELL=/bin/bash
    Feb 27 19:00:22 MYNAME-MBP.local Installer[4256]: Env: HOME=/Users/MYNAME
    Feb 27 19:00:22 MYNAME-MBP.local Installer[4256]: Env: USER=MYNAME
    Feb 27 19:00:22 MYNAME-MBP.local Installer[4256]: Env: LOGNAME=MYNAME
    Feb 27 19:00:22 MYNAME-MBP.local Installer[4256]: Env: SSH_AUTH_SOCK=/tmp/launch-wjOeEs/Listeners
    Feb 27 19:00:22 MYNAME-MBP.local Installer[4256]: Env: Apple_Ubiquity_Message=/tmp/launch-S51plA/Apple_Ubiquity_Message
    Feb 27 19:00:22 MYNAME-MBP.local Installer[4256]: Env: Apple_PubSub_Socket_Render=/tmp/launch-druDAU/Render
    Feb 27 19:00:22 MYNAME-MBP.local Installer[4256]: Env: COMMAND_MODE=unix2003
    Feb 27 19:00:22 MYNAME-MBP.local Installer[4256]: Env: __CF_USER_TEXT_ENCODING=0x1F5:0:0
    Feb 27 19:00:24 MYNAME-MBP.local Installer[4256]: Adobe Acrobat XI Pro (11.0.01)  Installation Log
    Feb 27 19:00:24 MYNAME-MBP.local Installer[4256]: Opened from: /Volumes/AcrobatUpd11001/AcrobatUpd11001.pkg
    Feb 27 19:00:24 MYNAME-MBP.local Installer[4256]: Product archive /Volumes/AcrobatUpd11001/AcrobatUpd11001.pkg trustLevel=202
    Feb 27 19:01:54 MYNAME-MBP.local Installer[4256]: InstallerStatusNotifications plugin loaded
    Feb 27 19:01:58 MYNAME-MBP.local runner[4269]: Administrator authorization granted.
    Feb 27 19:01:58 MYNAME-MBP.local Installer[4256]: ===================================================================== ===========
    Feb 27 19:01:58 MYNAME-MBP.local Installer[4256]: User picked Standard Install
    Feb 27 19:01:58 MYNAME-MBP.local Installer[4256]: Choices selected for installation:
    Feb 27 19:01:58 MYNAME-MBP.local Installer[4256]:           Install: "Adobe Acrobat XI Pro (11.0.01)"
    Feb 27 19:01:58 MYNAME-MBP.local Installer[4256]:                     AcrobatUpd11001.pkg#payload.pkg : com.adobe.acrobat.a11.AcrobatUpd11001 : 11.0.01
    Feb 27 19:01:58 MYNAME-MBP.local Installer[4256]: ===================================================================== ===========
    Feb 27 19:01:58 MYNAME-MBP.local Installer[4256]: It took 0.00 seconds to summarize the package selections.
    Feb 27 19:01:58 MYNAME-MBP.local Installer[4256]: -[IFDInstallController(Private) _buildInstallPlan]: location = file://localhost
    Feb 27 19:01:58 MYNAME-MBP.local Installer[4256]: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/Volumes/AcrobatUpd11001/AcrobatUpd11001.pkg#payload. pkg
    Feb 27 19:01:58 MYNAME-MBP.local Installer[4256]: Set authorization level to root for session
    Feb 27 19:01:58 MYNAME-MBP.local Installer[4256]: Will use PK session
    Feb 27 19:01:58 MYNAME-MBP.local Installer[4256]: Starting installation:
    Feb 27 19:01:58 MYNAME-MBP.local Installer[4256]: Configuring volume "HardDisk"
    Feb 27 19:01:58 MYNAME-MBP.local Installer[4256]: Preparing disk for local booted install.
    Feb 27 19:01:58 MYNAME-MBP.local Installer[4256]: Free space on "HardDisk": 47.25 GB (47253155840 bytes).
    Feb 27 19:01:58 MYNAME-MBP.local Installer[4256]: Create temporary directory "/var/folders/xr/gczqchkx567d6ty6y6rww5sr0000gn/T//Install.4256POG6iX "
    Feb 27 19:01:58 MYNAME-MBP.local Installer[4256]: IFPKInstallElement (1 packages)
    Feb 27 19:01:58 MYNAME-MBP.local Installer[4256]: Using authorization level of root for IFPKInstallElement
    Feb 27 19:01:58 MYNAME-MBP.local installd[4272]: installd: Starting
    Feb 27 19:01:58 MYNAME-MBP.local installd[4272]: installd: uid=0, euid=0
    Feb 27 19:01:58 MYNAME-MBP.local installd[4272]: PackageKit: ----- Begin install -----
    Feb 27 19:01:58 MYNAME-MBP.local installd[4272]: PackageKit: request=PKInstallRequest <1 packages, destination=/tmp>
    Feb 27 19:01:58 MYNAME-MBP.local installd[4272]: PackageKit: packages=(
                  "PKLeopardPackage <file://localhost/Volumes/AcrobatUpd11001/AcrobatUpd11001.pkg#payload .pkg>"
    Feb 27 19:01:59 MYNAME-MBP.local installd[4272]: PackageKit: Extracting file://localhost/Volumes/AcrobatUpd11001/AcrobatUpd11001.pkg#payload. pkg (destination=/private/tmp/.PKInstallSandboxManager/1.sandbox/Root/com .adobe.acrobat.viewer.updater, uid=0)
    Feb 27 19:01:59 MYNAME-MBP.local installd[4272]: PackageKit: prevent user idle system sleep
    Feb 27 19:01:59 MYNAME-MBP.local installd[4272]: PackageKit: suspending backupd
    Feb 27 19:01:59 MYNAME-MBP.local installd[4272]: PackageKit: Executing script "./preinstall" in /private/tmp/PKInstallSandbox.ZpuS9p/Scripts/com.adobe.acrobat.a11.Ac robatUpd11001.iBOpAc
    Feb 27 19:01:59 MYNAME-MBP.local installd[4272]: ./preinstall: 1545688085
    Feb 27 19:01:59 MYNAME-MBP.local installd[4272]: ./preinstall: Info: Space availability check passed.
    Feb 27 19:01:59 MYNAME-MBP.local installd[4272]: ./preinstall: Info: UI mode installation.
    Feb 27 19:02:03 MYNAME-MBP.local installd[4272]: ./preinstall: AcroPatchInstall:INFO: More than one path found, showing window to choose one.
    Feb 27 19:02:03 MYNAME-MBP.local installd[4272]: ./preinstall: Processed application path: /Applications/Adobe Acrobat XI Pro/Adobe Acrobat Pro.app.
    Feb 27 19:02:05 MYNAME-MBP.local installd[4272]: ./preinstall: '        INFO: For creating debug logs, please run following command in terminal'
    Feb 27 19:02:05 MYNAME-MBP.local installd[4272]: ./preinstall: '        $ sudo defaults write "/Library/Application Support/Adobe/Acrobat/11.0/com.adobe.Acrobat.InstallerOverrides" AcroPatchLogLevel debug'
    Feb 27 19:02:05 MYNAME-MBP.local installd[4272]: ./preinstall: '  cmd: /usr/bin/defaults read "/Library/Application Support/Adobe/Acrobat/11.0/com.adobe.Acrobat.InstallerOverrides" AcroPatchLogLevel'
    Feb 27 19:02:05 MYNAME-MBP.local installd[4272]: ./preinstall: '  cmdRetCode [1],  cmdErrMsg [2013-02-27 19:02:05.286 defaults[4296:1307] \nThe domain/default pair of (/Library/Application Support/Adobe/Acrobat/11.0/com.adobe.Acrobat.InstallerOverrides, AcroPatchLogLevel) does not exist], cmdOutput []'
    Feb 27 19:02:05 MYNAME-MBP.local installd[4272]: ./preinstall: u'Info: App. path is obtained as /Applications/Adobe Acrobat XI Pro/Adobe Acrobat Pro.app.'
    Feb 27 19:02:05 MYNAME-MBP.local installd[4272]: ./preinstall: '  cmd: /bin/ps -x -c -A | grep AdobeResourceSynchronizer'
    Feb 27 19:02:05 MYNAME-MBP.local installd[4272]: ./preinstall: '  cmdRetCode [1],  cmdErrMsg [], cmdOutput []'
    Feb 27 19:02:05 MYNAME-MBP.local installd[4272]: ./preinstall: 'Info: Getting installed application locale'
    Feb 27 19:02:05 MYNAME-MBP.local installd[4272]: ./preinstall: u'  cmd: /usr/bin/defaults read "/Applications/Adobe Acrobat XI Pro/Adobe Acrobat Pro.app/Contents/AcroLocale" AcroInstallLocaleID'
    Feb 27 19:02:05 MYNAME-MBP.local installd[4272]: ./preinstall: '  cmdRetCode [0],  cmdErrMsg [], cmdOutput [MUI]'
    Feb 27 19:02:05 MYNAME-MBP.local installd[4272]: ./preinstall: 'Info: The installed app language obtained [MUI].'
    Feb 27 19:02:05 MYNAME-MBP.local installd[4272]: ./preinstall: u'Info: Task plist file validation successful, file path: /private/tmp/PKInstallSandbox.ZpuS9p/Scripts/com.adobe.acrobat.a11.Ac robatUpd11001.iBOpAc/Tools/Tasks.plist'
    Feb 27 19:02:05 MYNAME-MBP.local installd[4272]: ./preinstall: 'Info: Checking for browser plugin.'
    Feb 27 19:02:05 MYNAME-MBP.local installd[4272]: ./preinstall: u'Info: The path obtained from /Library/Preferences/com.adobe.acrobat.pdfviewer is /Applications/Adobe Acrobat XI Pro/Adobe Acrobat Pro.app/.'
    Feb 27 19:02:05 MYNAME-MBP.local installd[4272]: ./preinstall: 'Info: checking if major version is 11 in /Library/Internet Plug-Ins/AdobePDFViewer.plugin'
    Feb 27 19:02:05 MYNAME-MBP.local installd[4272]: ./preinstall: '  cmd: /usr/bin/defaults read "/Library/Internet Plug-Ins/AdobePDFViewer.plugin/Contents/Info" CFBundleVersion'
    Feb 27 19:02:05 MYNAME-MBP.local installd[4272]: ./preinstall: '  cmdRetCode [0],  cmdErrMsg [], cmdOutput [11.0.0]'
    Feb 27 19:02:05 MYNAME-MBP.local installd[4272]: ./preinstall: 'Info: checking if major version is 11 in /Library/Automator/Save as Adobe PDF.action'
    Feb 27 19:02:05 MYNAME-MBP.local installd[4272]: ./preinstall: '  cmd: /usr/bin/defaults read "/Library/Automator/Save as Adobe PDF.action/Contents/Info" CFBundleVersion'
    Feb 27 19:02:05 MYNAME-MBP.local installd[4272]: ./preinstall: '  cmdRetCode [0],  cmdErrMsg [], cmdOutput [11.0.0]'
    Feb 27 19:02:05 MYNAME-MBP.local installd[4272]: ./preinstall: 'Info: checking if major version is 11 in /Library/PDF Services/Save as Adobe PDF.app'
    Feb 27 19:02:05 MYNAME-MBP.local installd[4272]: ./preinstall: '  cmd: /usr/bin/defaults read "/Library/PDF Services/Save as Adobe PDF.app/Contents/Info" CFBundleVersion'
    Feb 27 19:02:05 MYNAME-MBP.local installd[4272]: ./preinstall: '  cmdRetCode [0],  cmdErrMsg [], cmdOutput [11.0.0]'
    Feb 27 19:02:05 MYNAME-MBP.local installd[4272]: ./preinstall: 'Info: Browser Plugin should be updated.'
    Feb 27 19:02:05 MYNAME-MBP.local installd[4272]: ./preinstall: 'Info: Print Automator should be updated.'
    Feb 27 19:02:05 MYNAME-MBP.local installd[4272]: ./preinstall: 'Info: Print PDF Service should be updated.'
    Feb 27 19:02:05 MYNAME-MBP.local installd[4272]: ./preinstall: 'Info: Pre-validating all the tasks.'
    Feb 27 19:02:05 MYNAME-MBP.local installd[4272]: ./preinstall: 'Info: Pre-validation for all tasks successful.'
    Feb 27 19:02:05 MYNAME-MBP.local installd[4272]: PackageKit: Shoving /private/tmp/.PKInstallSandboxManager/1.sandbox/Root (1 items) to /tmp
    Feb 27 19:02:05 MYNAME-MBP.local installd[4272]: PackageKit: Executing script "./postinstall" in /private/tmp/PKInstallSandbox.ZpuS9p/Scripts/com.adobe.acrobat.a11.Ac robatUpd11001.iBOpAc
    Feb 27 19:02:05 MYNAME-MBP.local installd[4272]: ./postinstall: Extracting MUI.7z.
    Feb 27 19:02:07 MYNAME-MBP.local installd[4272]: ./postinstall: 7-Zip (A) 9.04 beta  Copyright (c) 1999-2009 Igor Pavlov  2009-05-30
    Feb 27 19:02:07 MYNAME-MBP.local installd[4272]: ./postinstall: p7zip Version 9.04 (locale=utf8,Utf16=on,HugeFiles=on,4 CPUs)
    Feb 27 19:02:07 MYNAME-MBP.local installd[4272]: ./postinstall: Processing archive: MUI.7z
    Feb 27 19:02:07 MYNAME-MBP.local installd[4272]: ./postinstall: Extracting  MUI/Application/Adobe Acrobat Pro.app/Contents/Built-in/Accessibility.acroplugin/Contents/MacOS/Acc essibility
    Feb 27 19:02:07 MYNAME-MBP.local installd[4272]: ./postinstall: Extracting  MUI/Application/Acrobat Distiller.app/Contents/Frameworks/AcroAMT.framework/Versions/A/AcroAM T
    Feb 27 19:02:07 MYNAME-MBP.local installd[4272]: ./postinstall: Extracting  MUI/Application/Adobe Acrobat Pro.app/Contents/Frameworks/AcroAMT.framework/Versions/A/AcroAMT
    Feb 27 19:02:07 MYNAME-MBP.local installd[4272]: ./postinstall: Extracting  MUI/Application/Acrobat Distiller.app/Contents/Frameworks/AcroAMT.framework/AcroAMT
    Feb 27 19:02:07 MYNAME-MBP.local installd[4272]: ./postinstall: Extracting  MUI/Application/Adobe Acrobat Pro.app/Contents/Frameworks/AcroAMT.framework/AcroAMT
    Feb 27 19:02:07 MYNAME-MBP.local installd[4272]: ./postinstall: Extracting  MUI/Application/Adobe Acrobat Pro.app/Contents/Frameworks/Acrobat.framework/Versions/A/Acrobat
    Feb 27 19:02:07 MYNAME-MBP.local installd[4272]: ./postinstall: ERROR: E_FAIL              
    Feb 27 19:02:07 MYNAME-MBP.local installd[4272]: ./postinstall: Extracting en_US.7z.
    Feb 27 19:02:07 MYNAME-MBP.local installd[4272]: ./postinstall: 7-Zip (A) 9.04 beta  Copyright (c) 1999-2009 Igor Pavlov  2009-05-30
    Feb 27 19:02:07 MYNAME-MBP.local installd[4272]: ./postinstall: p7zip Version 9.04 (locale=utf8,Utf16=on,HugeFiles=on,4 CPUs)
    Feb 27 19:02:07 MYNAME-MBP.local installd[4272]: ./postinstall: Error:
    Feb 27 19:02:07 MYNAME-MBP.local installd[4272]: ./postinstall: there is no such archive
    Feb 27 19:02:12 MYNAME-MBP.local installd[4272]: ./postinstall: '        INFO: For creating debug logs, please run following command in terminal'
    Feb 27 19:02:12 MYNAME-MBP.local installd[4272]: ./postinstall: '        $ sudo defaults write "/Library/Application Support/Adobe/Acrobat/11.0/com.adobe.Acrobat.InstallerOverrides" AcroPatchLogLevel debug'
    Feb 27 19:02:12 MYNAME-MBP.local installd[4272]: ./postinstall: '  cmd: /usr/bin/defaults read "/Library/Application Support/Adobe/Acrobat/11.0/com.adobe.Acrobat.InstallerOverrides" AcroPatchLogLevel'
    Feb 27 19:02:12 MYNAME-MBP.local installd[4272]: ./postinstall: '  cmdRetCode [1],  cmdErrMsg [2013-02-27 19:02:07.866 defaults[4318:1307] \nThe domain/default pair of (/Library/Application Support/Adobe/Acrobat/11.0/com.adobe.Acrobat.InstallerOverrides, AcroPatchLogLevel) does not exist], cmdOutput []'
    Feb 27 19:02:12 MYNAME-MBP.local installd[4272]: ./postinstall: u'Info: App. path is obtained as /Applications/Adobe Acrobat XI Pro/Adobe Acrobat Pro.app.'
    Feb 27 19:02:12 MYNAME-MBP.local installd[4272]: ./postinstall: 'Info: Getting installed application locale'
    Feb 27 19:02:12 MYNAME-MBP.local installd[4272]: ./postinstall: u'  cmd: /usr/bin/defaults read "/Applications/Adobe Acrobat XI Pro/Adobe Acrobat Pro.app/Contents/AcroLocale" AcroInstallLocaleID'
    Feb 27 19:02:12 MYNAME-MBP.local installd[4272]: ./postinstall: '  cmdRetCode [0],  cmdErrMsg [], cmdOutput [MUI]'
    Feb 27 19:02:12 MYNAME-MBP.local installd[4272]: ./postinstall: 'Info: The installed app language obtained [MUI].'
    Feb 27 19:02:12 MYNAME-MBP.local installd[4272]: ./postinstall: u'Info: Task plist file validation successful, file path: /private/tmp/PKInstallSandbox.ZpuS9p/Scripts/com.adobe.acrobat.a11.Ac robatUpd11001.iBOpAc/Tools/Tasks.plist'
    Feb 27 19:02:12 MYNAME-MBP.local installd[4272]: ./postinstall: 'Info: Checking for browser plugin.'
    Feb 27 19:02:12 MYNAME-MBP.local installd[4272]: ./postinstall: u'Info: The path obtained from /Library/Preferences/com.adobe.acrobat.pdfviewer is /Applications/Adobe Acrobat XI Pro/Adobe Acrobat Pro.app/.'
    Feb 27 19:02:12 MYNAME-MBP.local installd[4272]: ./postinstall: 'Info: checking if major version is 11 in /Library/Internet Plug-Ins/AdobePDFViewer.plugin'
    Feb 27 19:02:12 MYNAME-MBP.local installd[4272]: ./postinstall: '  cmd: /usr/bin/defaults read "/Library/Internet Plug-Ins/AdobePDFViewer.plugin/Contents/Info" CFBundleVersion'
    Feb 27 19:02:12 MYNAME-MBP.local installd[4272]: ./postinstall: '  cmdRetCode [0],  cmdErrMsg [], cmdOutput [11.0.0]'
    Feb 27 19:02:12 MYNAME-MBP.local installd[4272]: ./postinstall: 'Info: checking if major version is 11 in /Library/Automator/Save as Adobe PDF.action'
    Feb 27 19:02:12 MYNAME-MBP.local installd[4272]: ./postinstall: '  cmd: /usr/bin/defaults read "/Library/Automator/Save as Adobe PDF.action/Contents/Info" CFBundleVersion'
    Feb 27 19:02:12 MYNAME-MBP.local installd[4272]: ./postinstall: '  cmdRetCode [0],  cmdErrMsg [], cmdOutput [11.0.0]'
    Feb 27 19:02:12 MYNAME-MBP.local installd[4272]: ./postinstall: 'Info: checking if major version is 11 in /Library/PDF Services/Save as Adobe PDF.app'
    Feb 27 19:02:12 MYNAME-MBP.local installd[4272]: ./postinstall: '  cmd: /usr/bin/defaults read "/Library/PDF Services/Save as Adobe PDF.app/Contents/Info" CFBundleVersion'
    Feb 27 19:02:12 MYNAME-MBP.local installd[4272]: ./postinstall: '  cmdRetCode [0],  cmdErrMsg [], cmdOutput [11.0.0]'
    Feb 27 19:02:12 MYNAME-MBP.local installd[4272]: ./postinstall: 'Info: Browser Plugin should be updated.'
    Feb 27 19:02:12 MYNAME-MBP.local installd[4272]: ./postinstall: 'Info: Print Automator should be updated.'
    Feb 27 19:02:12 MYNAME-MBP.local installd[4272]: ./postinstall: 'Info: Print PDF Service should be updated.'
    Feb 27 19:02:12 MYNAME-MBP.local installd[4272]: ./postinstall: 'Info: Preparing for Rollback for all the valid tasks.'
    Feb 27 19:02:12 MYNAME-MBP.local installd[4272]: ./postinstall: u'  cmd: /bin/cp -fR "/Applications/Adobe Acrobat XI Pro/Acrobat Distiller.app/Contents/Frameworks/AcroAMT.framework/AcroAMT" "/tmp/com.adobe.acrobat.viewer.updater/rollbackstore/Applications/Ado be Acrobat XI Pro/Acrobat Distiller.app/Contents/Frameworks/AcroAMT.framework/AcroAMT"'
    Feb 27 19:02:12 MYNAME-MBP.local installd[4272]: ./postinstall: '  cmdRetCode [1],  cmdErrMsg [cp: symlink: Versions/Current/AcroAMT: No space left on device], cmdOutput []'
    Feb 27 19:02:12 MYNAME-MBP.local installd[4272]: ./postinstall: u'ERROR : The rollback preparation command /bin/cp -fR "/Applications/Adobe Acrobat XI Pro/Acrobat Distiller.app/Contents/Frameworks/AcroAMT.framework/AcroAMT" "/tmp/com.adobe.acrobat.viewer.updater/rollbackstore/Applications/Ado be Acrobat XI Pro/Acrobat Distiller.app/Contents/Frameworks/AcroAMT.framework/AcroAMT" failed.'
    Feb 27 19:02:12 MYNAME-MBP.local installd[4272]: ./postinstall: 'EXCEPTION: Caught an exception while preparing for rollback for task 0.'
    Feb 27 19:02:12 MYNAME-MBP.local installd[4272]: ./postinstall: 'Traceback (most recent call last):'
    Feb 27 19:02:12 MYNAME-MBP.local installd[4272]: ./postinstall: '  File "/private/tmp/PKInstallSandbox.ZpuS9p/Scripts/com.adobe.acrobat.a11.A crobatUpd11001.iBOpAc/Tools/TaskExecutor.py", line 1036, in beginScan'
    Feb 27 19:02:12 MYNAME-MBP.local installd[4272]: ./postinstall: '    prepareForRollback(plist[i],i)'
    Feb 27 19:02:12 MYNAME-MBP.local installd[4272]: ./postinstall: '  File "/private/tmp/PKInstallSandbox.ZpuS9p/Scripts/com.adobe.acrobat.a11.A crobatUpd11001.iBOpAc/Tools/TaskExecutor.py", line 588, in prepareForRollback'
    Feb 27 19:02:12 MYNAME-MBP.local installd[4272]: ./postinstall: '    prepareRollbackForOverwrite(dest,isDir,tasknum)'
    Feb 27 19:02:12 MYNAME-MBP.local installd[4272]: ./postinstall: '  File "/private/tmp/PKInstallSandbox.ZpuS9p/Scripts/com.adobe.acrobat.a11.A crobatUpd11001.iBOpAc/Tools/TaskExecutor.py", line 563, in prepareRollbackForOverwrite'
    Feb 27 19:02:12 MYNAME-MBP.local installd[4272]: ./postinstall: '    raise Exception("GenericError")'
    Feb 27 19:02:12 MYNAME-MBP.local installd[4272]: ./postinstall: 'Exception: GenericError'
    Feb 27 19:02:12 MYNAME-MBP.local installd[4272]: ./postinstall: ''
    Feb 27 19:02:12 MYNAME-MBP.local installd[4272]: ./postinstall: 'Info: The details of the failed task are'
    Feb 27 19:02:12 MYNAME-MBP.local installd[4272]: ./postinstall: '   TaskType = Overwrite'
    Feb 27 19:02:12 MYNAME-MBP.local installd[4272]: ./postinstall: '   StagingRootDir = Application'
    Feb 27 19:02:12 MYNAME-MBP.local installd[4272]: ./postinstall: '   RelativePath = Acrobat Distiller.app/Contents/Frameworks/AcroAMT.framework/AcroAMT'
    Feb 27 19:02:12 MYNAME-MBP.local installd[4272]: ./postinstall: '   IsDirectory = 0'
    Feb 27 19:02:12 MYNAME-MBP.local installd[4272]: ./postinstall: '   TargetPackageId = com.adobe.acrobat.11.viewer.app.pkg'
    Feb 27 19:02:12 MYNAME-MBP.local installd[4272]: ./postinstall: '   LangId = MUI'
    Feb 27 19:02:12 MYNAME-MBP.local installd[4272]: ./postinstall: '   ChecksumBefore = 0'
    Feb 27 19:02:12 MYNAME-MBP.local installd[4272]: ./postinstall: '   ChecksumAfter = 1925040286.0'
    Feb 27 19:02:12 MYNAME-MBP.local installd[4272]: ./postinstall: '   NSFileOwnerAccountName = root'
    Feb 27 19:02:12 MYNAME-MBP.local installd[4272]: ./postinstall: '   NSFilePosixPermissions = 509'
    Feb 27 19:02:12 MYNAME-MBP.local installd[4272]: ./postinstall: '   NSFileGroupOwnerAccountName = admin'
    Feb 27 19:02:12 MYNAME-MBP.local installd[4272]: ./postinstall: ERROR: Postinstall exited with error code 116.
    Feb 27 19:02:12 MYNAME-MBP.local installd[4272]: PackageKit: releasing backupd
    Feb 27 19:02:12 MYNAME-MBP.local installd[4272]: PackageKit: allow user idle system sleep
    Feb 27 19:02:12 MYNAME-MBP.local installd[4272]: PackageKit: Install Failed: Error Domain=PKInstallErrorDomain Code=112 "An error occurred while running scripts from the package “AcrobatUpd11001.pkg”." UserInfo=0x7fac8a42ebd0 {NSFilePath=./postinstall, NSURL=file://localhost/Volumes/AcrobatUpd11001/AcrobatUpd11001.pkg#pa yload.pkg, PKInstallPackageIdentifier=com.adobe.acrobat.a11.AcrobatUpd11001, NSLocalizedDescription=An error occurred while running scripts from the package “AcrobatUpd11001.pkg”.} {
                  NSFilePath = "./postinstall";
                  NSLocalizedDescription = "An error occurred while running scripts from the package \U201cAcrobatUpd11001.pkg\U201d.";
                  NSURL = "file://localhost/Volumes/AcrobatUpd11001/AcrobatUpd11001.pkg#payload .pkg";
                  PKInstallPackageIdentifier = "com.adobe.acrobat.a11.AcrobatUpd11001";
    Feb 27 19:02:12 MYNAME-MBP.local Installer[4256]: install:didFailWithError:Error Domain=PKInstallErrorDomain Code=112 "An error occurred while running scripts from the package “AcrobatUpd11001.pkg”." UserInfo=0x7fd3dbc6eee0 {NSFilePath=./postinstall, NSURL=file://localhost/Volumes/AcrobatUpd11001/AcrobatUpd11001.pkg#pa yload.pkg, PKInstallPackageIdentifier=com.adobe.acrobat.a11.AcrobatUpd11001, NSLocalizedDescription=An error occurred while running scripts from the package “AcrobatUpd11001.pkg”.}
    Feb 27 19:02:12 MYNAME-MBP.local Installer[4256]: Install failed: The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.
    Feb 27 19:02:12 MYNAME-MBP.local Installer[4256]: IFDInstallController DBC828D0 state = 7
    Feb 27 19:02:12 MYNAME-MBP.local Installer[4256]: Displaying 'Install Failed' UI.
    Feb 27 19:02:12 MYNAME-MBP.local Installer[4256]: 'Install Failed' UI displayed message:'The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.'.

    The error in the log is as follows:
    BEGIN INSTALL LOG EXCERPT
    Feb 27 19:02:07 MYNAME-MBP.local installd[4272]: ./postinstall: ERROR: E_FAIL             
    Feb 27 19:02:07 MYNAME-MBP.local installd[4272]: ./postinstall: Extracting en_US.7z.
    Feb 27 19:02:07 MYNAME-MBP.local installd[4272]: ./postinstall: 7-Zip (A) 9.04 beta  Copyright (c) 1999-2009 Igor Pavlov  2009-05-30
    Feb 27 19:02:07 MYNAME-MBP.local installd[4272]: ./postinstall: p7zip Version 9.04 (locale=utf8,Utf16=on,HugeFiles=on,4 CPUs)
    Feb 27 19:02:07 MYNAME-MBP.local installd[4272]: ./postinstall: Error:
    Feb 27 19:02:07 MYNAME-MBP.local installd[4272]: ./postinstall: there is no such archive
    END INSTALL LOG EXCERPT
    After this error the whole install begins a cascade failure.
    Bill@VT has the correct troubleshooting procedure though.  Download the update and try updating locally rather than through the ARM updater.

  • If I no longer have access to my original e-mail associated with my account and my passwords and e-mail accounts associated with my Apple device, how can I fix this solution? I have 2 ipads and 1 iphone and I cannot update any of my apps.

    I tried to change the e-mail associated with my apple account because my school was closing and I knew I would no longer have accss to that e-mail account, however now all 3 of my devices ( 2 ipads & 1 iphone are screwed up as far as the e-mail accounts associated with each device and the passwords. I have tried all the on-line support/suggestions and took my devices to a local Apple store and no one/nothing helps.
    Does anyone have a solution? I can purchase new apps but I cannot update any of the apps I have to any of my devices.
    <Email Edited By Host>

    Unfortunately, it says I can't delete anything without the missing password.

  • Months later and I still cannot update to IOS 5.1!!!

    You name it, Ive tried it.  Done all the different trouble shooting bits and bobs, ie uninstalled security, itunes reinstalled ,disabled apple mobile, used a different pc, etc yet still i cannot update my ipad?
    I even ventured to my local Apple store and the assistant had the same problem and couldn't help me either!
    Is it only my Ipad having this problem?  Why can't the Apple people see this device either??
    Apart from throwing the thing in the bin does anyone else have any suggestions of what I can do that might work please?
    Hoping someone will suggest something that I haven't already tried and will work.
    Thanks in hopeful anticipation but i'm not holding my breath........!
    Thank you..
    Below I have pasted the last thing I tried that still didnt work...
    From the Start menu, click All Programs and click Accessories.
    Click Run. A Run window (command prompt) appears.
    Type msconfig in the Open field and click OK.
    If Windows needs your permission to continue, click Continue. The System Configuration Utility opens.
    Click the General tab.
       Select the "Selective Startup" option.
    Deselect the "Load Startup Items" checkbox.
    Note: This step requires disabling third-party System Services and Startup Items, which can prevent some software or OEM hardware on your computer from working correctly. For example, this can affect the CD/DVD control buttons on portable computers or prevent wireless keyboards and mice from functioning. This is only required during troubleshooting to help isolate third-party conflicts with Apple software.
    Click the Startup tab.
    Select the "iTunes" and "QuickTime" checkboxes in the list.
    Click the Services tab.
    Make sure that "Hide All Microsoft Services" is selected.
    Click Disable All.
    Note: If you are troubleshooting an issue related to iPad, iPhone, or iPod touch, select the Apple Mobile Device checkbox.
    Click OK.
    Click Restart. After restarting (and logging in to Windows), a message may appear stating that Windows has blocked startup programs and indicates the Blocked startup programs icon in the notification area (far right) of the taskbar. Click the message.
    Click the Blocked startup programs icon, select Run blocked program and select System Configuration Utility.
    If Windows needs your permission to continue, click Continue. A window appears confirming that "You have used the System Configuration Utility to make changes to the way Windows starts." Click OK. The System Configuration Utility appears. Do not click OK here as this will prompt you to restart again. First try to reproduce the issue you were having.
    If following these steps resolves the issue, you may want to use the System Configuration Utility to turn on the third-party System Services and Startup Items one or a few at a time (restarting your computer after turning on the item or items) to identify which System Service or Startup Item is causing the conflict. You can turn all of them back on by selecting the Normal Startup option under the General tab of the System Configuration Utility window, but please note that this may cause the issue to recur.
    Additional Information
    If the issue is still occurring with Selective Startup mode, third-party security software may still be operating regardless of the state of Msconfig. Follow iTunes for Windows: Troubleshooting security software issues.
    Important: Information about products not manufactured by Apple is provided for information purposes only and does not constitute Apple’s recommendation or endorsement. Please contact the vendor for additional information.
    Rate this article:
    Not helpful Somewhat helpful Helpful Very helpful Solved my problem

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. For the iPad Mini the iOS is 6.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
     Cheers, Tom

  • I cannot update from OS 10.9.4 to 10.9.5. I get a message saying: File couldn't be installed error (513). I have configured my OS so that I have read and write permission followed by system with read and writ permission. Can someone help me? Thanks.

    I cannot update from OS X 10.9.4 t0 10.9.5> Whenever I try I get the following message: File couldn't be installed error (513) and something about not having the proper permission.  Under the Macintosh HD sharing and permissions settings I have customized the settings so that (Me) has read and write permission followed by the system with read and write permission, wheel and everyone have Read permissions.
    I have no problems updating apps such as Adobe CC or iTunes but cannot update the operating system, can someone help me? Thanks.

    1. Restart the computer in safe mode. Certain caches maintained by the system will be rebuilt.
    Safe mode is much slower to start up than normal. The next normal startup may also be somewhat slow.
    When the login screen appears, restart as usual (not in safe mode) and test. There's no need to log in while in safe mode.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t start in safe mode. In that case, go to Step 2.
    If there's no change after taking this step, continue.
    2. Back up all data before proceeding.
    Triple-click anywhere in the line below on this page to select it:
    /var/folders
    Right-click or control-click the highlighted line and select
              Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item named "folders" selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Restart the computer and empty the Trash.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

  • Cannot update printer driver on client computers

    Hi all,
    we are migrating users and computers from one domain (DomainA) to another one (DomainB). All was working fine: bidirectional trusts is created, all users and computer are migrated but the printer server still exists in DomainA and is being used. All
    45 printers are Canon models: Canon IR2525i and Canon IRC2030i. Also, Domain A print server is the last DC at domainA and is running Windows 2008 R2. Domain B DCs are running Windows 2003 SP2
    All users could print ... but yesterday a workmate tried to install a new printer (Canon iR ADV C2230), so he decided to install its driver. After that, all Windows 7 users were unable to print (there are some XP computer but they can print) because all
    Canon printers show a 'Driver update needed' message with privilege prompt, but users cannot update because they're non-admin users.
    We're using GPO & GPP for printer deployment. I've tried to use 'Point and print restrictions' as I could read at http://technet.microsoft.com/en-us/library/cc753269.aspx. First I disabled Point and print restrictions... the same result. After that,
    I tried to enable it and set as trusted server the DomainA print server and not showing warning or elevation prompt when connecting or updating driver... same result.
    Also, I tried to set GPO policy for user permission 'Devices: prevent users from installing printer drivers' to Disabled. and using GPP adding a common group for migrated users to local advanced users group.... same result.
    The last attempt was, using GPP printer deployment, set 'Replace' instead of 'Update' a printer, but after GPUPDATE /FORCE I can see the modified printer dissapears, but not returns. At event viewer I can see 0x80070bcb error : The specified printer driver
    was not found in the sistem and needs to be downloaded
    Any idea what else can I do? If I set admin user at privilege prompt drivers are installed succesfully, but is not a solutions because there is a lot of clients :(
    Thanks in advanced

    Hi SalvaG,
    Thanks for sharing your solution in the forum. We really appreciate your time and efforts.
    Best regards,
    Justin Gu

  • MAIL cannot update your mailboxes---error in MAIL 2.1

    "MAIL cannot update your mailboxes---"
    Have 26 Gb of space left and found the fix to delete the Envelope Index file. I moved Envelope Index to the DT and relaunched MAIL. It seemed to import 1200 items, then it just goes to colored wheel of death. Had to Force Quit 3x.
    Any ideas? Im trying to help a senior fix this problem. She cant get her email.

    Hi Steve,
    Not certain, but this can fix myriad Mail problems...
    Safe Boot from the HD, (holding Shift key down at bootup), it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move these folder & file to the Desktop.
    Move this Folder to the Desktop...
    /Users/YourUserName/Library/Caches/Mail/
    Move this file to the Desktop...
    /Users/YourUserName/Library/Mail/Envelope Index
    Reboot.

  • Need a help to update coherence cache values in c++

    Hi,
    I need to update coherence cache value of a particular object.
    Managed<ExposureHolderContract>::Handle contract =
    cast<Managed<ExposureHolderContract>::Handle>(cache->get(vsName));
    contract->setName("dsafd");
    When i try to cast to a ManagedObject:: Handle it says
    coherence::lang::ConstCastException: attempt to cast from a "const coherence::lang::Managed<ExposureHolderContract>" to a "coherence::lang::Managed<ExposureHolderContract>"
    at void coherence::lang::coh_throw_const_cast(const std::type_info&, const std::type_info&)(ConstCastException.cpp:27)
    at coherence::lang::coh_throw_const_cast(std::type_info const&, std::type_info const&)
    <stack frame symbol unavailable>
    <stack frame symbol unavailable>
    <stack frame symbol unavailable>
    <stack frame symbol unavailable>
    <stack frame symbol unavailable>
    at __libc_start_main
    on thread "main"
    In the documentation it says in order to call non static methods we need to retrieve the handle.
    but when I try to cast to a handle it fails.
    I'm inserting data to coherence cache by calling Managed::create method. Is this method making immutable object.
    ExposureHolderContract tempEhc(contractId, name, date, age, weight);
    Managed<ExposureHolderContract>::Handle ss = Managed<ExposureHolderContract>::create(tempEhc);
    cache->put(String::create(contractId.c_str()), ss);
    Please help me to update the recorde value.
    regards,
    sura

    Hi Sura,
    It is a matter of safety and correctness. The in-process caches return a locally held object, and thus if you made some change to it, that change would be visible within the in-process cache, while not visible to the remote cache. Thus future access to the in-process cache would see a value which does not actually exist in the remote cache. While it is true that if you modify it with the intent to immediately re-insert it this shrinks the window of incorrectness that window still exists, and of course the cache has no idea if you will ever reinsert the value. As for the effect on performance it should be insignificant if you actually do put it back in the cache as the cost of a cache update will easily be multiple orders of magnitude greater then the cost of the clone. Also remember there is no requirement to clone a value if you don't intend to mutate it, you can safely use it via the View. So the only time the performance cost of the clone could be considered significant is when you intend to mutate but not reinsert the data, but a clone is also necessary there as not cloning it would leave the in-process cache in an inconsistent state with respect to the remote cache.
    Mark
    Oracle Coherence

  • Cannot get Local Connection, No available resource, Wait-time expired

    Hi Friends,
    Please answer my queries below.
    Thanks and Regards
    Busincess Requirement
    I have to display a particular set of rows in a dashboard or screen, and it is being refreshed every 1 minute, also user can update from that screen displayed values.
    The below program extracts some data from database and passes to the front end through a collection where it is being displayed.
    Code Logic Flow
    1. CockpitAction calls CockpitOraDAO for database results
    2. CockpitOraDAO is a singleton class.
    3. After getting the CockpitOraDAO object, the action will then call the getLabAreaCockpitDetails() method.
    getLabAreaCockpitDetails will
         - Get the Connetion from the OracleConnectionManager class (It is a plain class with getPooledConnection() and releaseConnection() methods).
         - Execute the query and put the result to a collection
         - close the connection
         - return result to the calling action.
    This getLabAreaCockpitDetails() are called around once in every 1 minute
    So, I believe everytime a call is made to action for cockpit display, it will take the existing object of the CockpitOraDAO class and make a call to database. i.e there will be only one object of CockpitOraDAO reside in application server at any particular interval of time.
    My Understandings
    1. Only 1 object of CockpitOraDAO will reside in application server (provided it is not user longer and garbage collected) at a particular instance.
    2. Many objects of Connection will be created and destroyed.(Each time the getLabAreaCockpitDetails() method is called, we will get one connection from connection pool and in finally the Connection will be released to connection pool).
    My Problems
    It is showing the "Cannot get Local Connection, No available resource, Wait-time expired"
    after running around 1 full day.
    My doubts
    1. Can anybody say why I get this error ?
    2. There may be some connections are not closed. But I have checked at finally block, the status of the connection is closed after calling this method.
    3. There may be some problem due to the singleton instane of CockpitOraDAO, Is it affecting performance ?
    4. Is it valid that I have to make CockpitOraDAO as Singleton ?
    public class CockpitOraDAO extends DAOAdaptor //implements BISample
         private static CockpitOraDAO instance=null;
         private static boolean debug = true;
         * The below method will be used to provide the singleton intance of the CockpitOraDAO object.
         public static CockpitOraDAO getInstance()
              if (instance == null)
                   synchronized (CockpitOraDAO.class)
                        if (instance == null)
                             instance = new CockpitOraDAO();
              return instance;
         * The below method will be used to get the cockpit details of the lab area.
         * This will return collecton of sample details for the specific lab.
         public Collection getLabAreaCockpitDetails(Collection prevCockpitDetailList,Collection filterCriteria) throws Exception
         if(debug)
              System.out.println("Inside CockpitOraDAO::getLabAreaCockpitDetails() method");
              Connection conn = null;
              boolean sampleExists = false;
              PreparedStatement pstmt=null;
              ResultSet rs=null;
              String returnStr=null;
              StringBuffer sqlQuery = null;
              String tempComment1=null, tempComment2=null;
              LabCockpitDO labc=null;
              LabCockpitDO labc2=null;
              Collection resultList=null, manCommentList=null, labCommentList=null, labCompCommentList=null;
              ArrayList result1List=null, prevCockpitDetail1List=null,filterList = null;
              OracleConnectionManager manager = null;
              boolean flag = false;
              try
                   labc2 = new LabCockpitDO();
                   prevCockpitDetail1List = (ArrayList) prevCockpitDetailList;
                   sqlQuery = new StringBuffer();
                   sqlQuery.append("select s.sample_sample_no sample_no, s.sample_inspection_lot_no inspection_lot_no,");
                   manager = new OracleConnectionManager();
                   conn = manager.getPooledConnection("myDS");
                   pstmt = conn.prepareStatement(sqlQuery.toString());
                   if(debug)
                   System.out.println("Query********"+sqlQuery.toString());
                   rs = pstmt.executeQuery();
              catch(Exception e)
                   //System.out.println(e);
                   throw e;
              finally
                        try
                             manager.releaseConnection("myDS");
    if(debug)
    System.out.println("Connection Status Closed=true/ Open=false=["+conn.isClosed()+"]");
    if(conn!=null || !conn.isClosed())
    conn.close();
    if(debug)
    System.out.println("Connection Status After Closing Connection Closed=true/ Open=false=["+conn.isClosed()+"]");
                             if(rs != null)
                                  rs.close();
                             if(pstmt != null)
                                  pstmt.close();
                             conn = null;
                             pstmt=null;
                             rs = null;
                             sqlQuery=null;
                             returnStr=null;
                             labc=null;
                             labc2=null;
                             manCommentList=null;
                             labCommentList=null;
                             labCompCommentList=null;
                             tempComment1=null;
                             tempComment2=null;
                             resultList=null;
                             prevCockpitDetailList=null;
                             prevCockpitDetail1List=null;
                        catch(Exception e)
                             //System.out.println("Unable to Release Connection ="+e);
                             throw e;
              //if(debug)     
              //System.out.println(resultList);
              return result1List;
         }

    Hi,
    As you can see from other posts, this is a very common problem. Until now the cause always ends up pointing to a connection not being close.
    I suggest you try to run through a full single cycle of you app, while using the CLI monitoting to check that the connections created/closed matches the expected created/closed connections. Also that the number of free connections at the end is correct.

  • Folder redirection with Offline files enabled - Can I change the location of the locally cached files?

    I have a 2012 r2 server setup with folder redirection and offline files enabled. All this works perfectly.
    As you probably know, the local cache for offline files is stored at c:\windows\csc\v2.0.6\namespace\servername\
    The problem I have run into is that one user (who cannot be told to delete files cough ceo cough) has a very large documents folder, and a small SSD drive for his C drive. So the offline files are filling up his SSD. He wants all his files to be synced,
    so decreasing the max disk usage is also not an option.
    What I would like to do is move the Offline files to his D drive which is a large drive, however I have been unable to find any official method for doing this. Is there any provision to change this?
    If not, would it work to move the entire \servername\ path to the d drive and then create a junction at c:\windows\csc\v2.0.6\namespace\servername\ that points to d:\servername\?
    Thanks,
    Travis

    Hi,
    The following article is for Windows Vista but it should work at least in Windows 7.
    How to change the location of the CSC folder by configuring the CacheLocation registry value in Windows Vista
    http://support.microsoft.com/kb/937475
    Meanwhile creating a symbolic link should also work like:
    mklink /d "C:\Windows\CSC" "D:\CSC"
    Note: It will create d:\csc folder so you do not need to manually create it. 
    Note 2: As mentioned above, you may need to re-sync the offline files. Personally I also think robocopy will not work. 
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • "Unable to update local resource group" error

    Hello,
    I'm having a problem updating one of my local resource groups in RD Gateway Manager.
    We're on 2008 R2 SP1, and have a gateway in between us and another company. When a user needs to access their computer in the other company, we add the machine to the local group, and the account the AD RAP group, it works fine.
    However, every couple of weeks, it will not allow me to update the local resource group for computers. I receive the error "WMI Failure: Unable to update local resource group" ..and apparently google cannot find another instance of this error happening -
    no results at all - very odd. So the normal fix is to just recreate the RAP.xml file, then add the machines in again, but this is not a good enough fix long term, plus it misses the machines that are switch off when i recreate.
    Also - this will be logged in eventvwr TerminalServices-Gateway  
    "The resource group "MY GROUP NAME" could not be updated. The following error occurred: "23106". To resolve this issue, ensure that you have configured resource group settings correctly and set the correct value and permissions for the RAP.xml file and the
    RAPStore registry key."
    Google also cannot find anything for that error, OR that 23106 error code - I cannot get results no matter what I do. It cannot be permissions as I've checked them, and it works for a bit. I've ran the WMI diagnostics, and they're fine, no different to any
    other server in the environment. 
    I've also checked these forums and there is nothing on there. Does anyone know the relevance of that error code, or where I can check it out?
    Cheers,
    Jon

    I can confirm ..MPIN..'s solution fixes it.
    I had the exact same problem; I'd recently added a new server, and stopped the old server before decomissioning.  Adding the new serer to the TS RAP policy server didn't work and generated the OP's error.
    I removed the old server name (which was not pingable) and the group COULD be updated.
    Really crappy error handling - this is a defect and should be fixed.  A proper error would say "Not all machines in this group are valid, please remove the invalid entries" OR simply allow 'ok' without double checking (after all, the names are checked
    when adding).
    So often we accept shoddy software by proposing work arounds as 'the fix'.  The actual fix is to fix the software to be more descriptive and/or handle errors more gracefully.
    == John ==

Maybe you are looking for

  • App Store not accepting my Apple ID without credit card

    Hi! I recently bought an Iphone 4S and tried creating an Apple ID but was not successful because I don't have a credit card. What I did was I just registered using my laptop and was able to create one without any credit card details. However, when I

  • Open PO List as on particular date

    Hi all, I need a report which will give me the Open purchase orders as on particular date.  For example: the report of open PO as on 31st March shold be viewed on 25th April. Is there any standard reports which will fulfill this requirement. I alread

  • Question about syntax in procedures

    I've worked with SQL-based environments for a few years but just now getting into Oracle. This is probably a very simple question, but why do some commands have to be wrapped in an EXECUTE IMMEDIATE statement within a procedure? For example, the foll

  • Several keyboard shortcuts no longer works

    I went from an iBook G4 with MacOS 10.3.9 and Final Cut Express 2.something. I now use a curent MacBook Pro with macOS 10.6.2, Final Cut Express 4.0.1 and all the latest updates and patches. Several keyboard shortcuts that should be there are not wor

  • SEVERE: Failed to initialize connector [Connector[HTTP/1.1-8090]]

    Hi Experts, Configurting SSL  with Tomcat on AIX 7.1 for Opentext ( IXOS) Archive Server 10.50, following the install guide. Can not connect SSL port 8090 , but can connect via  http 8080, getting following error INFO: Initializing ProtocolHandler ["