Canon 6D display language resets to chinese after auto off and indicates card full

Just assembled my new 6D with 24-105 mm and display comes in urecognizable language, after changing into english it reminds me that unused new memory card is full, so I reformat and seems ok... BUT when starting after auto off again the same unrecognizable language and full card !
I have taken battery out and put in again, reset to default, changed card, and keeps doing the same.
Any suggestions ?

It could be the GPS in your camera IF you have been secretly kidnapped in your sleep, and placed somewhere in China, inside a cleverly detailed re-creation of your normal surroundings. The persons responsible thought of everything BUT the GPS in your camera sensing your true location and resetting the default menu language to Mandarin.
Investigate this, but very, very carefully.
Scott
Canon 6D, Canon T3i, EF 70-200mm L f/2.8 IS mk2; EF 24-105 f/4 L; EF-S 17-55mm f/2.8 IS; EF 85mm f/1.8; Sigma 35mm f/1.4 "Art"; EF 1.4x extender mk. 3; 3x Phottix Mitros+ speedlites
Why do so many people say "fer-tographer"? Do they take "fertographs"?

Similar Messages

HT204368 After I updated my iphone 4 to ios 6.1.3 I can no longer connect to my bluetooth plantronics model M25. I tried reset all settings after turning on and off also submitted diagnostic. Do I have to buy yet another bluetooth set?

After I updated my iphone 4 to ios 6.1.3 I can no longer connect to my bluetooth, plantronics model M25. I tried reset all settings after turning on and off also submitted diagnostic. Do I have to buy yet another bluetooth set?

Thank you wjsten for your soon reply. Unfortunately on these days I'm in a country that Apple don't have any retail store here and for sake of time I prefer to fix it myself to DHL it to the nearest country to use its warranty. Do you have any idea how can I fix it? Do you think it's a software issue?

No power after turning off and plugging into a new functioning outlet.

No power after turning off and plugging into a new functioning outlet

Perhaps corruption of the Energy Saver settings...
Reset the PRAM cannot hurt.
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
Excerpt from http://support.apple.com/kb/ht1379

The browser doesn't start after turning off and turning on the computer

The browser doesn't start after turning off and turning on the computer. I tried to delete the program entirely (along with personal preferences), create a new account, install a different browser versions. All this did not help. (I have Windows 7.) Help, please! Every day I have to reinstall Firefox!

Hello Nastena, try a clean re-install, certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you '''remove Firefox program files''' and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!
* check also if your antivirus or other security software(firewall, antispyware etc) blocks firefox access.
thank you

Music Playlist display language STUCK on Chinese

I support Middle School students in an iPad 1-to-1. My student presents with 3 of her playlists (two user created, one system created) displaying playlist title in Chinese. Student reports that system language was formerly changed to Chinese as a prank, then changed back. Issue persists. We have already Reset All Settings AND Reset Network Settings. Student updated to iOS 7 AFTER issue presented, did not resolve.
Location Services are ON. Language is English, Region Format is United States. Date & Time: Set Auto, Time Zone New York.
Has anyone seen this? What to try next?
Appreciate any help.

ITMS decides what language to use based on your preferences.
In the International preference pane, move English to the top and then run iTunes. Switch countries at the bottom of the home page, then switch back to Switzerland. The iTMS should now be in English.

Offline or Online Backup after switching off and on the archving mode

Hello guys,
I am doing an SAP (on Oracle) upgrade. In the upgrade guide there are two completely different statements about making a backup of the Oracle database during upgrade.
1st statement:
"If you deactivate archiving, you have to make a full backup of the database after the downtime before you switch archiving back on. This must be executed as an offline backup."
2nd statement:
"Backup: Database Was Operated in NOARCHIVELOG Mode
Activate ARCHIVELOG mode again and create a full backup of the database. This must be executed as an offline backup."
Quotes from: "Upgrade GuideSAP ERP 6.0 Including Enhancement Package 4 Support Release 1 ABAPBased on SAP NetWeaver 7.0 Including Enhancement Package"
I understand the fact that the backup has to be offline if you do it before you activate archiving. This is logical.
1) Why does SAP do these two proposals before and after switching on archiving which are completely contrary?
2) Why does the backup has to be offline if you do it after switching on archiving?
May be somebody knows the background for this.
Thanks
Nik

Hi,
Two kind of Recovery play an important role in Database Recovery after DB Restore. The Database recovery can be Compete recovery, point-in-time recovery or partial recovery.
Media Recovery (due to media failure/corruption or loss of Data files) can be performed by applying all Offline Redo Log files which are generated from Online Redo-log file in Archive Mode.
Instance Recovery can be done with the help of Online Redo log file and undo table-space to achieve consistent status of Database. In this recovery the committed transactions (which are logged in Online Redo Log files) are roll forward and the uncomplete transactions (which are also logged in Online Redo Log Files) are rolled back into DB using Undo space info.
If you deactivate archiving, you have to make a full backup of the database after
the downtime before you switch archiving back on. This must be executed as an offline backup.
                   With Archive log Mode , one can deal with Media Recovery and Instance Recovery. Upon deactivating Archive log mode, the Archive log files will not be generated and the circular logging will take place within the group of online redo log files.
                   So, after deactivating Archive Log mode, Its recommended to take immediate offline backup to have consistent Backup copy of Database which may be required to deal with demanded media recovery by restoring that immediate latest offline Backup. If the database operates in NOARCHIVELOG mode, the database can ONLY be completely recovered from instance failure but not from media failure. This means that, in case of media failure you will lose all work done after the last valid offline backup. The database can be backed up only while it is completely closed.
                   Upon media failure after deactivating the Archive log mode (..rare chance, but we can not ignore it...),the complete recovery can not be achieved if the large time gape is there between the last successful offline backup and DB crash because between this time it may be the chance that the Online Redo log files are overwritten so many times in circular manner.

I have a photosmart C7280 printer. Powers itself on after powering off and gets error message/blink

Photosmart C7200 powers itself on after powering off. I get an error message and lights are blinking. To clear I have to unplug.
This question was solved.
View Solution.

What is the error message? What lights are blinking? The troublshhooting page here may help.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Word documents have disappeared from my desk top (macbook air) and cannot be found anywhere, happened after switching off and re-bootingk

Saved word documents have dissappeared from the desk top after saving. Problem seems to occur when laptop is switched off and then re-started. they can't be found anywhere e.g tried spotlight, recent documents etc. Help. Joe

First, you might as well address the two apparently-minor issues you found:
Some info on the Epson Scanner Monitor (via searching these forums):
http://discussions.apple.com/thread.jspa?messageID=8272208&#8272208
Not sure about the MS Word message, but it looks like you might need an upgrade. I'd check with Microsoft, or perhaps VersionTracker.com.
Ok, back to the original problem. Does the message have any other text (intelligible or not)?
Does it give you any options, especially "report"? If so, take it, then look via Console for a crash log.
What IS in the system log for the sleep/wake time? There should be a System Sleep, followed by a System Wake, and perhaps another line or two. Anything in that area might be helpful.

Error: cartridge not suitable for this printer after switch off and on

HI,
I have an officejet 6310 all-in-one. After printing and switching it off and switching it back on the next day, I get the message (translated from Dutch):
catridge error:
Rightside cartridge isnot suitable for this printer
Switching it off, removing either the right-hand cartridge or even both cartridges doesn't solve this issue. Anyone has an idea how to solve this?
Thanks in advance,
Ronald.

Hi - Not sure why the other link didn't work. Here is the URL to the document:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00831987&tmp_task=solveCategory&lc=en&dlc=en&cc...
Hope that helps.
Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
I am an HP employee.

HT3131 Clamshell mode not working even after powering off and reconnecting display; external monitor goes black anyway

After connecting an external monitor (non-Mac) to my MacBook (Mac OSX 10.6.6) w/proper adaptor, setting up to use clamshell mode as per manual, the external still goes black even after putting MacBook to sleep, disconnecting and reconnecting external and powering up again as suggested in Support. Displays are set to Mirror. Also, when I open Displays in System preferences, 2 different windows for Resolution settings appear. Where have I gone wrong? This monitor (Viewsonic) came with it's own software for setup on a Windows PC, but of course it is not being used on the MacBook.
Any help would be appreciated!

Hi Mike,
Yes I followed all the procedueres....except for waking the computer using a keyboard click. For obvious reasons one is just inclined to open the top of the MacBook to wake it when the external goes dark...I did that twice, until I realized that very last step was needed to 'wake' it. It worked. Something so simple, easy to overlook I guess.
I did leave the monitors mirrored, fyi, if I don't then all I can access from the external are the resolution settings. This Viewsonic comes pre-loaded with Windows software of it's own and doesn't quite behanve the way my previous external did, but I got it figured out.
Thanks for your response, tho!

After turning off and turning on my phone, push notifications resets for all my apps

After updating to ios 7.0.3, if I turn my phone off then back on, the push notifications prompt resets for all my apps. I have to go back in to apps and allow the apps to send me push notifications. Is there a solution for this or is it a bug?

http://www.verizonwireless.com/support/knowledge-base-26502/
Above if battery pull/soft reset doesn't help. If it's boot looped may need new equipment

"Charged" icon comes on after turning off and stays on til batt. is dead.i

Sometimes after I turn my iPod off, the charged icon will come on. If left this way it will drain the battery. Also, most times my PC does not recognize my iPod and I have to reset the iPod for iTunes to recognize my Pod is plugged in. It seems to be freezing alot lately, skipping etc. causing me to have to do a reset where sometimes the problems are solved, but always temporarily. Ideas???

Do you mean the "restore" under summary when you plug in your iPod? If so, I have tried this and it usually does fix my problems, but always temporarily. Thanks for your help and/or any more ideas.

Clicked to install software update, now it just has a blue screen. I have tried resetting by holding down on/off and home at same time, apple logo shows up and then goes back to blue screen. What is wrong??

I clicked on the software update, acted like it was updating, and now it just has a blue/turqois screen. I have tried to reset it by holding down the on/off button
and home button at same time, and the apple logo shows up and them goes back to the same screen. Please help...

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Can reset, never able to turn off, and i can no longer listen to songs

Some one please help me. I am new to the ipod family and my ipod nano 3G hates me. I was working away listening to some music and then pressed the pause button to answer the phone. Then i pressed it again the ipod said play but the song only said 0.0. it seems to be stuck in a loop. So i try to load a podcast show and nothing not a video or sound or anything. So i get online looking for answers and then read that hold toggle press the menu centre thing and reset your ipod, so i try it...... i never see this Apple icon that everyone is talking about. Please help me make my ipod like me again.

I am having a similar problem. Mine won't play the songs...but now my computer won't recognize it's there...and now it's frozen...it started out small...I thought I could erase it...but I can't get the computer to recognize it...or itunes so I can't erase anything. I've tried restarting it.

After turning off and then on l7650 i loose the printer network on pc

i choose not to leave l7650 power on all time every time i power on i have to delite and reinstall printer to print

I had a similar problem and found that it was because my router would assign a different IP address to the printer each time (using DHCP) and the driver was trying to use the same one that was there when it was installed. This can be fixed by going into the configuration for the router and reserve a specific IP address for your printer. That way it will always be the same. When you install it after that, it will continue to work each time.
The instructions for your router should tell you how to configure it this way. It would be different for each one, so I can't describe that. It probably involves browsing to the router from your PC, logging in and looking for a menu item to configure the wireless setup. In there will be a way to "reserve" certain IP addresses for certain things on the network. That is what you are looking for.
Good Luck!
I may work for HP, but my comments are always my own!
If we're lucky and something I say is useful, let me know with kudos! If we're really lucky and it actually solves the issue, then mark it solved! Thanks!

Canon 6D display language resets to chinese after auto off and indicates card full

Similar Messages

Maybe you are looking for