Canon iP5200 and Snow Leopard - Color Management

I was wondering if anyone knows how to completely disable color management when printing using Photoshop CS4 and a Canon iP5200 with the very latest driver 10.26.0.0?
I've seen this link on the Apple website which to me implies that if I set Photoshop CS4 to "No Color Management" and select "Colorsync" under "Color Matching" in the print driver then all color management is switched off, including that of the printer:
http://docs.info.apple.com/article.html?path=Mac/10.6/en/8641.html
This is also what Canon support told me, but is this correct, I'm somehow not convinced? The latest print driver with Snow Leopard has no specific option to turn off color management in the print driver.

What you should do is select Color Matching and set this to 'Canon Color Matching'. This will then let the printer control the colour management.
Note that the colour profiles for the Canon printers are based on the paper stocks used. And the papers that have the largest gamut are the photo papers. So, after setting the Canon Color Matching, open the Quality & Media menu and select the appropriate paper you are using and the Print Quality to High. But don't expect good output if you are using plain paper. Only photo papers should be used with the photo modes.
Pahu

Similar Messages

Photoshop CS3 on Snow Leopard color management

I have CS3 on Snow Leopard and an Epson R1900. If I let Photoshop manage the colors the print is dark and on the red side. If I let the printer manage the colors and use the same profile it looks much better. I found this old thread:
http://forums.adobe.com/message/2313020#2313020
Which says it is a known problem with Snow Leopard and Adobe is working on it. Does anyone know if this has been resolved?

Was DYP wrote:
There are a bunch of different ways to attack this problem. Here was a good thread.
http://forums.adobe.com/thread/369773?start=150&tstart=0
I would add two things to your list.
a. Snow Leopard seems to use sRGB as the default profile so I would use that as the assigning profile.
b. You should convert to Edit - Convert to Profile choosing your Printer/Paper profile (for printing color managed output) in PS before you do #1.
that thread is rather busy... its hard to pick out the good information. It seems mostly concerned with CS4. Do you know what issues apply to CS4 only and which issues apply to CS3/Snow Leopard?
I am not sure what you are saying in point a. If I have a custom profile for a particular ink/paper combination I need to assign that profile, right? Using sRGB is only useful if I want no color control at all I believe.
b. Seems to permanently convert the image to that profile, which I would think you would not want to do in general since you generally want to keep the image in its original format.

Canon printer and Snow Leopard

I recently upgraded to Snow Leopard and have now spent up to 8 hours trying to get my Canon MX 340 working again. I checked the printer log and it said that the printmanagerfailed, I found a topic here about the same problem and it stated to go into system preferences and right click the canon printer and to select reset printing system. Well I did that and it wiped out all my printers so needless to say that didn't work. Now I can't get it setup at all. I have reloaded all of the drivers and software and it isn't even showing up in my system preferences so I can't add it. I am pulling my hair out and really really need some help. HELP!

Why would I go to HP printer support, it is a canon printer and yes I did download Canon's driver, what a joke. I have found some information on this forum but so far no good. At least I now have it showing up in systems preferences but still not working. I wished I had checked all this b4 upgrading since I may not have done it. I have downloaded the Apple supplied driver so if anyone out there knows what to do now I still need help.

Canon 500D and Snow Leopard 10.6.2

After I upgraded to Snow Leopard 10.6.2 my Digital Camera Canon500D is not detected anymore...although i removed its driver and installed it again ..no improvements still not detected either in Finder or with canon utilities or Iphoto or aperture.
Any suggestions.

I'm not familiar with your model (in fact, I couldn't find a 500D on the Canon support site), but I have a Canon SX1 IS and had a minor problem with the Canon software no longer being compatible with Snow Leopard. Canon has since updated that software (Digital Photo Professional). Or what type of software are you referring to - I'm not aware of having to install any driver. If you plug it into the USB port, it should just show on your desktop. Another possibility is to simply use a card reader for now with your USB port - that is how I transfer all the images. As soon as you plug that in, you should get the reader's icon on your desktop and you can copy/transfer/download the images from there.

Canon MP600 and Snow Leopard

Hi, does anyone know if the MP600 works with snow leopard? Canon says it's compatible but their drivers are not working at all. Are there drivers available even??? Thanks

I'm printing just fine to an MP600, though I have it connected to an older Leopard machine and am printing from the SL machine wirelessly. I lose some functions that way, and can't get a decent photo print unless I do it from the Leopard machine (not sure exactly why), but for everyday printing it works great.
One issue you might be running into is that there are two different drivers for the MP600... you want the CUPS printer driver, not the other one.

Wireless print server DPR-1260/Canon i9900 and Snow Leopard 10.6.1

Hello,
I have recently got my Mac Book Pro and have the latest system (10.6.1) and cannot print with a wireless print server. I have a Dlink DPR-1260, and a Canon i9900 printer. I have done everything and I still cannot print. Please I need help!!!!
Susan

Hello Susan and welcome to Apple Discussions.
Unfortunately the Canon Mac drivers have never worked correctly with the wireless print servers. I tested a Dlink model some years ago and while the Windows drivers for the same model would work fine, the Mac driver would always fail.
The only solution was to use the Gutenprint driver suite for Mac OS X. This software provided drivers for many brands of printers including Canon, and got our A3 inkjet working - albeit it wasn't always available as it seemed to never wake from sleep mode.
Checking the Gutenprint drivers included with 10.6, which are added when you do a custom install or by running the Optional Installer package within the 10.6 DVD, the i9900 is not listed as a supported model. It appears that only the Canon version of the i9900 driver is included with 10.6.
So, you have some decisions to make...
1. Don't use wireless and just have the i9900 plugged in directly to the Mac via USB
2. Replace the Dlink with an Airport Express. Due to the way in which Apple has made their Airport units, they will let you use the Canon driver.
3. Keep the Dlink and purchase an alternate driver software package called Printfab. If you are printing mostly graphics on the i9900 then this driver suite can provide you with more colour control than the Canon driver. And it will work with the Dlink like the Gutenprint drivers do.
Hope this helps
Pahu

Canon MP560 and Snow Leopard

Hello... today I set up a new Canon MP560 multifunctional printer/scanner. I didn't use the set up disk, but downloaded all the latest drivers from the Canon Support site. I've also installed the "Canon Drivers" package from Software Update. The good news is that setting it up as a wireless printer was very straightforward. You can join the network from the control panel on the printer itself, entering the WPA key, and then it appears in Print & Fax - first as "Bonjour Scanner" and secondly, after a while, as a "Canon IJ Network" printer when you click "more printers". However, no matter what I do, I can't get Image Capture or the Canon scanner software to recognise it as an available scanner. However - and this is the bizarre bit - if I use File --> Import --> Canon MP560 in Photoshop Elements 8, I can scan straight into Photoshop TWAIN import. And if I scan FROM the control panel on the MP560, I can send the scan to the Mac as an image or as a PDF. So "network scanning" clearly is POSSIBLE over the WiFi network, just not using Image Capture, and the Print & Fax control panel is not seeing it as connected either (when you click the "Open Scanner" button in the control panel, it pops up a big box with "No scanner available" in the middle...)
Anyone got one of these working properly in Image Capture and able to tell me what to do?
best regards,
Matt

Hello Matt,
I don't have access to my MP980 which is on wireless to check this, but if you use Preview (which uses Image Capture) and select File > Import from Scanner, do you see 'Include Network Devices'. I seem to remember having to use this menu to scan from the MP via network.
Also, with regards to the Print & Fax > Open Scanner operation, I think you need to install the MP Navigator EX 3.0 Opener application to resolve this symptom. You can download this app from here.
Pahu

Best practice for iCloud across Lion and Snow Leopard

Hi all,
I'm not going to bleat about SL not supporting iCloud. I understand the business model.
However, I'm wondering if any of you are in the same shoes as me and, if so, how you handle content management across iCloud compatible and incompatible devices.
I have Lion on our 6month old iMac and Snow Leopard on my 6 year old Macbook. This Macbook is still incredibly fast and reliable. I program websites across both devices using software like Coda 2, Transmit, etc etc...
I'm a huge fan of the cloud and, while I can use dropbox on all my devices, I kinda like the inbuilt functionality of iCloud more. (Plus I have more space there). Just wondering what workflows people are using to try and sync and work with content across compatible and incompatible devices.
Cheers,
Danno

Danno. wrote:
Hi all,
I'm not going to bleat about SL not supporting iCloud. I understand the business model.
However, I'm wondering if any of you are in the same shoes as me and, if so, how you handle content management across iCloud compatible and incompatible devices.
I have Lion on our 6month old iMac and Snow Leopard on my 6 year old Macbook. This Macbook is still incredibly fast and reliable. I program websites across both devices using software like Coda 2, Transmit, etc etc...
I'm a huge fan of the cloud and, while I can use dropbox on all my devices, I kinda like the inbuilt functionality of iCloud more. (Plus I have more space there). Just wondering what workflows people are using to try and sync and work with content across compatible and incompatible devices.
Cheers,
Danno
There are some hacks to using iCloud with Snow Leopard. One of the keys is you must use iCloud as your primary source for Contacts and Calendars. That is, when you want to make additions or changes to either your calendar or contacts you really MUST do it from the web interface to iCloud. Otherwise you may wind up with duplicates.
See the article here: http://bit.ly/LvVCR2

Can I have both Lion and Snow Leopard on One Hard Drive?

My problem is I need to run a PowerPC game on Lion which Lion no longer supports. So i thought i could download Snow Leopard back to my Mac and partiition my hard drive in the process as that is the only way i know of to have both Lion and Snow Leopard. I went through the Boot Camp Asistant process and it seems it will only partition Windows 7 to my Mac when i need Snow Leopard. If anyone has any idea how to help me have both Lion and Snow Leopard at the same time on just one hard drive or figure out how to run the PowerPC programs on my Mac (if there is a way around it). The help will be well appreciated!

How To Run Snow Leopard On A New Mac
This does not apply to new Mac Minis or MacBook Airs. When newer models are introduced that also require Lion for hardware support, the techniques described below will no longer work with the possible exception of using Parallels 7.
What has to be done:
Create a new partition on the hard drive.
Get a clone of a 10.6.8 Snow Leopard system. Put the cloned Snow Leopard system onto the new partition.
Step One: Create a new partition on the hard drive
To resize the drive and create a new partition do the following:
1.    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
       After the main menu appears select Disk Utility and click on the Continue button. Select the hard drive's main entry then click on the Partition tab in the DU main window.
2.   You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
3.    In the lower right corner of the sizing rectangle for each partition is a resizing gadget. Select it with the mouse and move the bottom of the rectangle upwards until you have reduced the existing partition enough to create the desired new volume's size. The space below the resized partition will appear gray. Click on the Apply button and wait until the process has completed. (Note: You can only make a partition smaller in order to create new free space.)
4.   Click on the [+] button below the sizing window to add a new partition in the gray space you freed up. Give the new volume a name, if you wish, then click on the Apply button. Wait until the process has completed.
You should now have a new volume on the drive.
It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss. Your drive must have sufficient contiguous free space for this process to work.
Step Two: Obtain a clone of a Snow Leopard system:
You will need access to a Mac already running Snow Leopard. You will need a 16 GB USB flash drive or an external hard drive to which you can clone the Snow Leopard system from the Mac that has Snow Leopard installed. Alternatives are:
Option One:
Install a new Snow Leopard system onto a USB flash drive. Boot the Mac used for installing with the USB flash drive. Update the flash drive system to 10.6.8 using the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard. Verify that you can boot the Mac with the USB flash drive.
Take the USB flash drive to your new Mac and try booting from it. If it works then clone the system from the flash drive to the newly made partition:
          Clone using Restore Option of Disk Utility
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
          Destination means the new partition on the internal drive. Source means the USB flash drive.
Option Two:
If you have a large enough external drive you can erase and use, then it would be easier to just clone the entire Snow Leopard system from the source Mac computer to the external drive.
          Clone using Restore Option of Disk Utility
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
          Destination means the external drive. Source means the Snow Leopard Mac's internal drive.
After cloning verify that it will boot the source Mac. If so then take the external drive to your new Mac boot with it. If all is well then restore the clone to the new partition on your new Mac:
          Restore the clone using Disk Utility
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
          Destination means the new partition on the internal drive. Source means the external drive.
If the above seems too daunting then you might consider running Snow Leopard inside an emulator such as Parallels 7. You are permitted to install a single copy of Snow Leopard inside a virtual machine. You will need to first purchase a copy of Parallels 7 and install it on your new Mac. Create a new virtual machine configured for Mac OS X. You may then install Snow Leopard in the virtual machine then download Mac OS X 10.6.8 Update Combo v1.1 and update to 10.6.8. Be sure to include Rosetta in your initial Snow Leopard installation. Rosetta is not installed by default rather it's an optional install.

In limbo between Leopard and Snow Leopard - stupidly didn't back up

I've got an old-school black MacBook, about four years old now. I never cared enough to upgrade it to Snow Leopard, but now I want Lion. So, I borrowed my parents' five-license Snow Leopard install disc and started off on the journey to upgrade to Snow Leopard, download the App Store update, then download and install Lion. I didn't get far.
First, let me say that I didn't back up my hard drive. Like an idiot. Yes, I know it was stupid, so there's no need to say anything. My previous installs (a few clean re-installs) have gone without a hitch, so I figured I'd trust Apple and just run the installation without backing up. Dumb.
The Snow Leopard installation started fine, but was interrupted when the installer said the install failed. Restart, try again. Booting from the install DVD, things seemed to be going fine a second time around -- picked my language, got to the install set-up screen, picked Macintosh HD as my installation drive. And then things stopped working. The installer said my HD could not be written to and that it needed repair. So I went to Disk Utility to try that. Repair Disk wasn't available, so I clicked Verify Disk. That got interrupted when it said the disk needed to be repaired, after which the Repair Disk button was clickable. Tried to repair, but apparently my HD is screwed beyond the capabilities of Disk Utility.
I tried to reboot the MacBook from the HD, which Disk Utility said still had Leopard running on it. The computer wouldn't boot up. Safe Boot didn't work. So, without any other real options, I thought I'd try my luck by just trying the install again. Booted up from the install DVD, and ran into the same issues. Didn't magically fix itself, of course. So my MacBook is stuck in limbo between Leopard and Snow Leopard, won't boot from the HD and won't let me repair the disk when booted from the DVD. What do I do?
I plan to try a couple third-party disk-utility programs tomorrow (8/25/11) to recover the files on my HD. There's not much I care about on there (just some iPhone photos and my resume, really), so doing a clean wipe of the HD and installing Snow Leopard is an option. But I'd of course rather be able to recover my personal files. Is this possible at this point?
Another question I have regarding a clean wipe: If I end up having to clean off the HD and lose all my data, I'll lose the iTunes configuration for my iPhone. Will iTunes be able to import my apps and settings from my phone if I plug it in?
Thank you very much.

For a hard drive try Newegg.com http://www.newegg.com/Store/SubCategory.aspx?SubCategory=380&name=Laptop-Hard-Dr ives&Order=PRICE
Or OWC http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
Here's instructions on replacing the hard drive http://creativemac.digitalmedianet.com/articles/viewarticle.jsp?id=45088
Here's a cheap SATA external hard drive case on eBay http://cgi.ebay.com/USB-2-5-SATA-HDD-HARD-DRIVE-EXTERNAL-ENCLOSURE-CASE-BOX-/120 636286623?pt=PCC_Drives_Storage_Internal&hash=item1c167ba69f

I tried copying a photo and pasting it in another event/group within iPhoto but the paste feature doesn't work. This wasn't an issue with both Leopard and Snow Leopard. Do you have any solutions or tips?

I bought a new MacBook Pro with OsX Lion as operating system. I use iPhoto a lot and when I tried copying a photo then pasting it to another event/group, the 'paste' feature doesn't work. This wasn't the case with Leopard and Snow Leopard where the 'paste' feature worked. What I did was to paste the photo first to the desktop before transferring it to the new event/group. I brought my Mac to the Apple store where I bought it and the technicians were themselves surprised that the 'paste' feature didn't work. Chalked it up to glitches in the Lion os. So how do we fix this? I just find it absurd that a feature that used to work in Snow Leopard has been disabled in Lion, and the user still has to undergo an additional step to make it work, when new technology is supposed to make things easier for users.
Also, hasn't anyone noticed that it takes longer for the computer to boot upon opening?

Instead of copy and paste drag the photo to the new event. Or flag it and use the add flagged photos to selected event command
LN

CAn I run Lion and snow leopard on the same computer with different sign-ins?

CAn I run Lion and snow leopard on the same computer with different sign-ins?

Alternatively, partition your internal HD and dual-boot it. Do note that you have to reboot to switch back and forth. You can't do it by logging out and back in.

New iPod Touch won't sync with computer - have latest version of iTunes and Snow Leopard. Computer won't even acknowledge the iPod.

New iPod Touch won't sync with computer - have latest version of iTunes and Snow Leopard (10.6.8). Computer won't even acknowledge the iPod. Have restarted both, changed ports, etc. What's do I need to do?

Have you tried here:
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
Do not forget the Additional Information topic.

IPod touch second generation. Trying to sync to mac. Have updated itunes and snow leopard. When I plug it in, it is recognized in iphoto, not itunes. ipod is freezing. Have tried several times to set back to factory settings, but computer wont see it

iPod touch second generation. Trying to sync to mac. Have updated itunes and snow leopard. When I plug it in, it is recognized in iphoto, not itunes. ipod is freezing. Have tried several times to set back to factory settings, but computer wont see it

Try here:
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

Is it possible to install Lion on the second hard disk on my Mini (2010) Snow Leopard Server, and switch between Lion and Snow Leopard? I like those voices Lion has in speech.

Is it possible to install Lion on the second hard disk on my Mini (2010) Snow Leopard Server, and switch between Lion and Snow Leopard? I like those voices Lion has in speech.

When baltwosaid NO emphatically, that was described as CORRECT ANSWER. Ditto in the caeses of the radically different answers from Camelotand Matt Clifton
Could it be that CORRECT ANSWER needs better defining by Apple?
That apart, yes, switching might involve rebooting. About the voices, well, I was the other day adding voice to a commentary in a video I was working on. There's only American English accent in SL — Lion I believe has British ones as well.
Why not, I wondered, try to install Lion purely for academic interest, maybe with an SD card (Sandisk Ultra II, 16GB) as Tom Nelson says is possible at http://macs.about.com/od/macoperatingsystems/ss/Perform-A-Clean-Install-Of-Os-X- Lion-On-Your-Mac.htm

Canon iP5200 and Snow Leopard - Color Management

Similar Messages

Maybe you are looking for