Cant send mail w 2WIRE

Cant send mail using gateway 2WiRE w/ ATT as ISP

Hi kzo631, and a warm welcome to the forums!
ATT has so many servers & plans, which one are you using & the Port #s?
Is the Incoming Mail Server pop.att.yahoo.com, and the Outgoing Mail Server smtp.att.yahoo.com.

Similar Messages

  • Still Cant send mail? HELP PLEASE!

    I am connected to the server.
    POP3 and SMTP look corrected.
    Connection doctor says I am connected to the server.
    I can receive mail.
    but
    I CANT SEND ANYTHING.
    Please help can someone tell me why post is not going!

    even i am facing the same issue i am using email account which is on exchange server 2008 and able to recieve emails perfectly fine but, issue is when i try to send email thru my Mac mail client ( mail 3.0 [930.3]) it gives error. I checked this connection doctor as well didnt got any error messAGE authentication was done . But still cant send mail out checked for ports as well all are open on router firewall but still no luck can anyone help me on this. Thanks

  • C6-01- Cant send mail via yahoo mail

    I have set up my yahoo mail account on my Nokia C6-01. I receive mails as they should do. But I Cant send mail. When I compose a mail and try to send it it just stays in outbox. I have set the mailbox settings correctly. While my gmail account works fine to send mails. Mails are sent instantly. Is anyone else going thru this trouble? And I Cant set up the Ovi mail mailbox. It keeps telling me "unable to sign in" How shall I solve this problem?
    In Love With My C6-01:Now running on Nokia Belle!
    Solved!
    Go to Solution.

    Well, it works fine if you use Nokia messaging service. If you use the standard mailbox it has been failing. I have some reservations about Nokia messaging service and thats why I dont want to use it.
    In Love With My C6-01:Now running on Nokia Belle!

  • Can receive, but cant send mail

    Any ideas? I can receive but cant send mail. It says..
    The SMTP server “mailhost.zen.co.uk” rejected the password for user
    Have mail version 4.4
    Many thanks

    Hi,
    I would double check your settings and port numbers.
    Incoming Mail (pop3) server mailhost.zen.co.uk and port for Incoming mail (POP3) is 995
    Outgoing Mail (smtp) server mailhost.zen.co.uk and port for Outgoing mail (SMTP) is 587

    Also make sure under SMTP that the outgoing server requires as secure connection (SSL) box is checked as well as the incoming POP3 (SSL) box.
    Can you say if this is a recent issue or one that has been there since setup?

  • Cant send mails with mountain lion

    cant send mails with mountain lion, but i can recive....

    Hi, i am having the same problem. this is what i have noticed.
    I have 2 x imac's and 2 x macbook air's
    i upgraded the 2 macbook air's and 1 of the imac's to Mountain Lion, all these have problems acessing sites that require you to login .
    the one remaining imac is still running lion and works perfect.
    i am using a dlink router with DD-WRT firmware, i tested teathering from my iphone and i can log into websites fine using the newly upgraded mac's.
    It's not a wireless issue as my imac is using an ethernet connection.
    is there a compatibility issue with some routers.

  • Cant send mail from iPad and iphone

    Hello:
    I have the same configuration of email accounts in my macbookpro, ipad and iphone, but i cant send email from my ipad and iphone. The message appear in sent folder ( imap ) but the recipient never recive the mail.

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    iPad Mail
    http://www.apple.com/support/ipad/mail/
     Cheers, Tom

  • Cant send mail using hotspot

    Hi.  I have started using my iPhone 4S as a WiFi hotspot for my MBP when on the road.  Mail collects from all my accounts ok but I cant send any mails from my MBP thru the Hotspot connection.  I dont get any error message, just the spinning icon next to the sent mailbox and no info in the activity window.  Any ideas welcome.  thanks

    Are you sending mail using a Broadband provider account?
    For instance, Virgin Media Mail can only be send through the Virgin Media Sever when you are actually connected to your Virgin Media line (at home)
    An attempt to send mail using the outgoiong server smtp.virgin.com will be blocked if it isn't coming down one of their own lines.
    To cure it, you'll need to add a different smtp server to our mail account that can be used while youo're out an about. Normally this would be the smtp server that your phone company gives you i.e smtp.orange.co.uk or whatever.

  • Cant send mail but can recieve

    have an iphone 3g and just today its stopped sending emails. it comes up with error message
    user name or password for smtp.(email [email protected] is incorrect??
    is the server just down or have i stuffed something up. like i said still receive but cant send from phone

    I began having the same issue today. Several people have posted on the MS livemail forum with this issue today with no response. I was able to work around (found it in the troubleshooting section here) by going settings > mail > livemail account > outgoing mail server > at&t smtp server > on. This is only a work around. There is clearly something that changed today. Another thread talked about not sending when on wifi and using this work around but even with wifi off it will not send without this work around change.

  • Cant send mail within certain wifi networks!

    Hi.
    I have my own wifi network at home which works fine.
    When i come round to my mums house, she has an orange (phone company in UK) wireless router.
    It all works fine and im on websites and downloading mail etc but i just cant send it from mail.
    It says the selected server is unavailable.
    As soon as im out of this wifi network its fine...
    Any ideas what this could be?
    Thanks, Ben

    Some ISPs, that provide their own email service to its customers, block traffic that is destined for port 25 of mail servers if it is not their mail server. So, if you don't have the same ISP has mum, that's likely why you are not getting through. You might try specifying port 465 or port 587 as your outgoing mail port, most likely with SSL enabled, but I would start by asking your email provider what should your smtp server settings be when you are on a network that blocks port 25 traffic to anyone's mail server but their own. Also ask whether those same settings would work when you are on their network, that way you wouldn't have to make two sets of outgoing mail servers for your mail account.

  • Cant send mail (well not all mail)

    Hi all,
    After the disapoinment of icards no longer being around i downloaded some stationery for mail.
    upon trying to send it i get cannot send message using dot mac.
    When watching the mail activity bar it goes upt about 50kbs then down to 0.
    I have tried one line txt emails and they send fine to my gmail but cant send the stationery ones!
    i have deleted my account from mail and then added it again still cant.
    My ipod touch can send mail using the same wifi network, so cant be my ISP or my network.
    i have tried smtp.me.com and smtp.mac.com with and without SSL etc etc to no avail.
    im running a g5 with 10.5 on it fully updated and using mobile me, (dot mac sound so much better!!)
    So any ideas would be helpful
    ben

    Hi kzo631, and a warm welcome to the forums!
    ATT has so many servers & plans, which one are you using & the Port #s?
    Is the Incoming Mail Server pop.att.yahoo.com, and the Outgoing Mail Server smtp.att.yahoo.com.

  • Cant send mail out.

    Hi-
    I'm running an Xserve ( new intel build) , using OS X server 10.5.5.
    I can send mail from one user to another from within the domain. I can also receive email form the outside world.
    however, I cant email out.
    SMTP log file reports the following
    "Oct 17 19:25:08 BHW1-Server postfix/qmgr[42665]: warning: connect to transport smtp: Connection refused
    Oct 17 19:25:15 BHW1-Server postfix/smtpd[42715]: warning: 189.71.93.145: hostname 18971093145.user.veloxzone.com.br verification failed: nodename nor servname provided, or not known
    Oct 17 19:25:48 BHW1-Server postfix/qmgr[42746]: warning: connect to transport smtp: Connection refused"
    The ip changes based on whom I try to email to ( I assume I'm getting bounced by someone's mail relay or servers)
    I have rebooted, restarted various services and am fairly convinced this is a configuration problem somewhere-
    any mail guru's help out?

    How is your server connected to the world? Are you relaying your mail server trough your ISP? Or is the domain you internally use, known on the internet? From the mail you try to send, is the info included in its envelope correct?
    As I assume that you use an internal FQDN not publicly know, this is how I resolved a similar situation:
    1. the server must be using the correct relay server
    2. per (local) user the email address must be set to an allowed (publicly known) email address.

  • Cant send mail..very annoying

    I have 2 e-mail accounts set up on my mac that I synced over to my touch but neither will send e-mail. One is a Virgin [UK] account and one my work e-mail. Any suggestions? They both work fine on my mac just not the touch and nothing has been changed.cheers

    still cant send from my work e-mail account which is annoying as this is why I bought the thing!
    It tries to send with the bar at the bottom going half way but then says "connection to the server was lost" so irritating!

  • Cant send mail

    I cant send email on either of my accounts from the iphone. It is saying to check smtp settings but they are correct.
    Was sending fine a day ago, but seems to intermittently not want to work. Any ideas?  Receiving fine to both accounts.

    Make sure your outgoing mailserver settings are correct. In particular, try using StartTLS instead of SSL/TLS, this helps in some cases.

  • I cant send mail from my through mail

    I have an email account with virgin, brought it through and i recieve mail but i am not able to send mail, not sure why?

    Isn't mail.virgin.net the name of the Incoming Server -- the incoming server, which you say is working is set up at Mail Preferences/Accounts/Account Information as to name of the server, Username, and password, along with entries in Mail Preferences/Accounts/Advanced for Port select for the Incoming.
    However, if that is working for you, you must have it correct. For the Outgoing server, isn't the proper name for Virgin services smtp.virgin.net? In Mail Preferences/Accounts/Account Information, click on the arrows beside the name of the SMTP, and choose Edit Server List. Remove all, or all but one of any references to the smtp.virgin.net. Enter anew, or with the remaining server, click on the Advanced Tab there, and choose Use Custom Ports. Then enter the Custom Port to be Port 25, and set the Authentication to None, and have no entries in Username or Password. This is consistent with those specs I can online saying the SMTP does not require Authentication.
    Also click Use this server only. Now if the smtp.virgin.net server is online, it should work.
    Ernie

  • Cant send mail from my phone

    I can't send mail from my iphonem I can receive it, however

    If you want help, you're going to need to provide a whole lot more information. What is the exact wording of the error messages you've received? Who is your email provider? Does the problem exist on WiF or cellular or both?  What troubleshooting steps have you already taken? Have you deleted the account and added it back? Have you reset your phone by pressing and holding the power and Home buttons until the silver apple appears?
    The more information you can provide, the more likely you are to get the help you need.
    Best of luck.

Maybe you are looking for

  • Provisioning error in in OIM 11g

    Hello, We are trying to provision an application instance of ACF2 from sysadmin console to a user. After checkout the status is provisioning. Open task, shows Create User failed, with the below error message. "Server not available, error encountered

  • Cant read a part of  xml file using AS3

    Hi i can read everything from my xml file except a part that i can always get teh first items of each category (it will make more sence in a sec) So here is my xml [HTML]<?xml version="1.0" encoding="UTF-8"?> <flashxml>   <second_page>     <sp text="

  • How to get the initial (first) transaction

    Hi, everybody. I need to get the initial (or first) transaction, from which the current was called. Does anybody know how? Example: Tr. FEBAN after some operations calls FB05, then in OPENFI-logic SY-TCODE = 'FB05'. How can I get 'FEBAN'. Maybe there

  • Where did the current song listing go for iTunes Internet Radio?

    I listen to internet radio on iTunes all the time, and I always loved being able to check the title and artist of whatever song was playing.  I just upgraded my iTunes to 11.1.3(8) and now the internet radio no longer shows me the title & artist of t

  • Creative Zen V Plus Backli

    Sup all!?I really hope it'ss not defecti've but for the past week it seems to be losing its display power (most likely called the Backlight). It's almost to the point to where I can't even see the display. The Backlight seems to be burning out (If po