Capital goods

Hi Gurus,
I have done migo for capitalgoods purchase and captured and posted the excise in migo, entered miro also, and i have done the return delivery to vendor using 122 movement.
during migo
50% of excise gone to cenvat on hold
50% to excise accounts
in reversal 100% amount is deducting from the excise accounts,nothing from cenvat on hold what could be the reason, and what is the right procedure,
Thanks.
Naga.

Hi Naga,
In standard SAP, even we can claim balance 50% of cenvat amount by using J2I8 T code immediately. No need to wait for one year.
So, that the system will deduct the full amount while doing the return delivery.
So, do not worry. It is a standard.
Hope it will clarify your doubt.
Award, if found useful.
Regards
Rifaie.M

Similar Messages

CENVAT CREDIT 100% TAKEN IN CASE AED ON CAPITAL GOODS INSTEAD OF 50%

Hi Experts,
This is with reference to the Cenvat Credit taken on Additional Excise Duty Payable on Capital Goods.
Presently in SAP 100% Cenvat Credit has been taken into 26010713 CENVT CAP GOOD (CAD) but as per law 50% Credit should be taken in the same year in which
Duty has been paid and balance 50% should be taken in next year.
The same treatment has been taken correctly in excise records.
And i want to know only for imported there has been any law change regarding 100% credit should be paid in same year.
Regards,
Manjax

Yes, this is std behaviour of the system,as per the law the AED will be allowed to take 100% credit in first finanacial year only.
For more information refer the below link.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/808c60ca-013b-2c10-34a2-94d1eb442e6f?quicklink=index&overridelayout=true

4 Entries for 1 purchase of capital goods

Dear Gurus,
I am Purchasing excisable Capital Goods ( Either from local or Import Vendor). In both cases in RG 23 c Part 1, register shows 4 entries for only one capital purchase. BUt in RG23part2, system is considering first entry out of 4 entries from RG23CPart 1.WHy it is like that ?.
What is the CIN Rule for AED. is is 50 % this year and 50% next year or full 100 % in current year in case of capital goods AED.
Please Help.
Thanx in advance.

As per Std. rule u can take the ADC credit 100% in the Current year for Capital Goods.
Biswajit

AED for import purchase of capital goods.

Hi guys,
We are executing the import flow for capital goods.In this case we also have the AED for customs(4%) applicable.In case of AED for customs we can take credit of 100% in the 1st year itself even for capital goods.But the problem is that after GR takes place the GL for carry forward gets updated for the AED even though we are taking complete credit in the 1st year.Hence the creadit is being taken twice for the same amount.
PLease suggest any solutions for the above problem.
Thanks in advance,
Akshay

Hi
Please go through the SAP note on the same
Regards,
abhay

Excice invoice captured as capital goods, but material is raw material

All SAP Gurus,
We have wrongly captured (and posted) the excise invoice as Capital goods (RG 23C), but material is Raw material (RG 23A).
Material document can not be reversed as material is already issued and consumed for production activities.
To get the effect in Rg 23 A, we have passed the Excise JV (J1IH - Other Adj.).
Due to this Excise JV, we are getting entry in RG 23A, but the same entry is also displayed in RG 23C.
Is there a way to delete/remove/reverse this entry from RG 23C.
Please suggest,
Regards,

Hi,
Use following functions to adjust the duties in RG23A and RG23C;
Go to J1IH - Excise JV
Use following method to reduce duties from RG23C Accounts
Making Adjustment Postings for Other Transactions
Use: - You follow this procedure if you want to make an adjustment posting that does not fall into any of the other categories of adjustment offered by this function. You can only use an external document as your reference document.
Procedure: -
1. J1IH > Excise JV > Other adj.
2. Enter data as required, including:
u2022 Document number
Enter the number of the external document that you want to refer to.
u2022 CENVAT account selection group box
Specify which account is affected by the adjustment posting is for. Here in your case select RG23C.
3. Click on u201CEnteru201D button.
The system displays the information from the material document.
4. Adjust the posting date as necessary and enter Vendor code as per requirement.
5. Enter the amount of excise duty in either of the following ways:
u2022 To enter line items for different materials and the excise duty accordingly, choose u201CDetailsu201D button and enter the line items in the table.
Here fill details like Material Code, Quantity as per Excise Invoice, Batch No, Reference (i.e. GRN Document), BED and Ed Cess Amount manually.
If you want system to propose the BED and Ed Cess Amount, Click on u201CGet Excise Invoiceu201D button and select the proper Excise Invoice from which the proportionate amount is to be copied.
Select the u201CExcise Invoiceu201D and click on u201CContinueu201D button.
It will copy BED and Ed Cess and SECess amount as per the quantity mentioned here. It will be proposed in proportion of selected Excise Invoice quantity and value.
u2022 To enter the excise duty only, choose u201CHeaderu201D button and enter the excise duty in the totals fields at the foot of the screen.
6. Specify which G/L accounts are to be posted to.
7. Save the adjustment posting.
System will post Excise JV Document; Accounting Document with Part2 Serial No has been successfully created.
Use following method to take duty credit in RG23A Accounts
Making Adjustment Postings for Additional Excise Paid by Vendors
Use: - You follow this procedure if a vendor has increased the amount of excise duty that it originally charged you and you want to debit the difference to your CENVAT account.
Procedure: -
1. J1IH > Excise JV > Additional excise.
2. Enter data as required.
In the Document number field, enter then number of the document sent to you by the vendor.
u2022 CENVAT account selection group box
Specify which account is affected by the adjustment posting is for. Here in your case select RG23A.
3. Click on u201CEnteru201D button.
4. Adjust the posting date as necessary and Enter Vendor Name.
5. Enter the amount of excise duty in either of the following ways:
u2022 To enter line items for different materials and the excise duty accordingly, choose u201CDetailsu201D button and enter the line items in the table.
Here Enter Material code, quantity as per excise invoice, reference document (i.e. GRN Document), batch no., BED and Ed Cess Amount to be posted.
u2022 To enter the excise duty only, choose u201CHeaderu201D button and enter the excise duty in the totals fields at the foot of the screen.
6. If the duty qualifies as countervailing duty (CVD):
a. Select CVD applicable.
b. Enter the CVD amount in the BED amount field.
7. Specify which G/L accounts are to be posted to.
8. Save the adjustment posting.
System will post Excise JV Document; Accounting Document with Part2 Serial No has been successfully created.
Then do J2I5 - Extract and J2I6 - Print Excise Registers

Accounting Effect for Capital Goods Purchase

Hi,
Iam using SAP 8.8 PL 13. How does the accounting takes place in case of an Item marked as Fixed Asset in Item Master?
In GL account determination I have assigned Capital Cenvat Credit A/c. for Capital Goods on Hold A/c.
Suppose I purchase an Fixed Asset Item for Rs.10000/- from a Vendor who has also been assigned Asset A/c in BP Master. I have created separate tax code for capital goods. The tax code is BED 10 %.
In Incoming Excise Invoice I get the Following JE effect.
                                                           Debit               Credit
Capital Cenvat Credit -                      Rs.10
Capital Cenvat on Education Cess    Rs.10
Capital Cenvat Credit                         Rs.5
Capital Cenvat Credit on HS Cess     Rs.5
Capital Cenvat Credit                         Rs.500
Capital Cenvat Credit                         Rs.500
Incoming Cenvat Clearing A/c                                    Rs.1030
Can somebody explain how this works?
Rgds
Kalli
Edited by: Kallicharan Nadar on Aug 30, 2010 11:22 AM

Hi Kalli,
In Administration-> Setup-> Financials-> G/L Account Determination-> Purchaseing Tab-> Tax Sub Tab-> "Capital Goods On Hold Percentage set" - 50 % and set GL in "Capital Goods On Hold Account" once you done these setting. When you are going to make Incoming Excise Invoice transaction that time system is booking 50% excise amount in current year and remaining 50 % will book in next year and same for Cess and ShCess.
Cenvat credit on capital goods is allowed only when it is received in the factory. However, only 50% of the credit may be availed in the financial year when the capital goods are received in the factory and the balance 50% may be availed in any subsequent financial year, provided the capital goods are in the possession of the manufacturer. The Cenvat Credit Rules, 2004, do not impose any condition upon the manufacturer to avail of the credit only when the capital goods are put to use on the commissioning of the plant.
Refer...
http://www.cbec.gov.in/excise/cx-rules-main.htm
Thanks
Sachin

Commercial rounding for capital goods

Commercial rounding off of all duties
All the Duties are rounded up in PO & MIGO with some routing development through ABAP.
Now client requirement is that in case of capital goods
1.     If suppose that in Capital Goods Cenvat is Rs. 45.00, in same year only 50% credit is available hence Rs. 22.50 i.e. after rounding off it is available to us 23.00 and in on hold account only Rs. 22.00 should be available, but present SAP system does not propose the same
2.     If Value of Secondary Education Cess is Rs.1/- for capital goods then credit available in current year should be Rs.1/- & on hold account it should be Zero
Business is saying that it is statutory requirement as per Govt. Notification
How much Govt is firm on this rule & how other companies are achieving this using SAP?
Another Question is that While reversing CENVAT credit taken for capital goods without rejecting material (Only Duty reversal because credit wrongly taken)
We have to pass Excise JV through J1iH & reverse 100 % duty. STD procedure is that   we have to transfer 50 % duty from Hold account to the RG23 C part 2 then reverse 100 % duty
But business is saying that it is wrong practice & against excise law .In this case how to handle CENVAT on Hold Account.
( I have Already used OB90 & routing Number 17 is working fine but not for above case )
Thanks
Edited by: sachin patil on Mar 10, 2009 7:00 AM

Dear sachin ,
As far as I see, there is no loss to the company,
1. you paid the vendor for the full excise amount
2. As a manufacturing unit you are liable to take 100% credit
3. IF you classify the material as capital goods as per your needs then take 50% now and 50% in next financial year
4. If Raw material take 100% credit
5. If the material has been mistakenly classified as C and first 50% credit availed, then to correct your operations you will have to take second 50% from J1IH then in that case you will have to clear all credit on hold from your original 50% credit entry & the J1IH entry, hence you will end up taking 100% credit.
In such conditions you can also opt for credit reversal through J1IH against the said part2 entry, & thenj create a fresh ID declaring material as raw material & take fresh 100% credit.Here also that second 50% from the on hold account would be required to be cleared.
Hope this helps,
Regards,
Akhileshwar K

Procurement of Capital Goods-Accounting entries error

Hi All
I processing procurement of Capital Goods scenario.
Qty - 1; Base Amount: 100; BED: 16%; AED: 8%; SED: 4%
When I posted Goods Receipt, I beleive the accounting entries are expected to be as follows:
Dr BED 16
Dr AED   8
Dr SED   4
Cr CENVAT Clg 14-
Cr CENVAT On Hold 14-
But the Part II entries are like as following after posting the GR:
Dr BED 8+
Dr AED   4+
Dr SED   2+
Cr CENVAT Clg 24-
Dr CENVAT On Hold 10 +
Could you please help in this regard
Best Regards
Rahul

for capital goods u can't claim the whole excise that u have paid, it will be only 50% u can claim for the first year..

Unable to avail credit 50% balance of previous years credit on capital good

Dear All,
Cenvat on Hold :
Unable to avail credit 50% balance of previous years credit on capital goods.
When Capital On-Hold is taken for a year(for vendors) and selected a Vendor and when Transfer Credit is clicked,the error message appears.(TCode - J2I8)
Cannot Reconcile : Crossed Return Date, please Reverse
Message no. 8I582
Pls guide.......
Regards
Sachin

Hi,
The above error message looks to be a strange one in J2I8.
As per the above message, check whether there is any pending subcon-challans due for reversal using J1IFR transaction.
Also check whether you are getting subcon challans in J2I8.
Finally, check whether any SAP notes are available.
Thanks & Regards,

Capital Goods Entry

As per the legal aspect , when the company buys a capital goods, 50% of the Cenvat amount can be utlized for the current year while the other 50% should be utlized in subsequent financial year. As per this scenoria , our client had taken only 50 % of Cenvat Amount in the last financial year , now they want to take the credit of unutlized credit for this financial year .
1. How to utilize the previous years Unutilized Credit Amount for the current year.
2. How the Unutilized amount is tracked in the Rax Payment Wizard .
Help me to sort out this issue . As this issue is very serious as the client had to run the tax payment wizard for the current month .
Thanks

Hi balaji jaganathan
check this note
[India: No Credit shown in Tax Payment wizard]
[ 1359068 ]
and also check you have set this
under Admin >> Setup >> Financial >> GL detemination >> Under Purchase TAB >> TAX > Capital goods on hold Percentage >> 50% (Give the percentage here)
Edited by: Prasanna s on Aug 6, 2009 1:47 PM

CAPITAL GOODS credit.

Dear all,
A capital goods is sent to subcontractor for some Job work , it does not come within 180 days , resulting the duty is debited as per rule in transaction code J1IH . subsiquently the goods are received back. Now while making the JV to re credit the debited amount in J1IH the system by default credits 50% amount(since it is a capital goods) instead of 100% as this is not the purchase for the first time. (here the challans are maintained manually )What should be done to post the entry by 100% in this scenerio ?
Regards,
Ashish

Hi,
I did not understand the question fully, but still would try to answer it.
You say that the remaining credit of 50% was not taken in the opening balance. Does that mean that you want to take it over now?
If yes, then the procedure is like this:
Lets say that there is a credit of Rs.50 to be taken over to SAP. To pass this entry, you have to use the transaction J1IH - Additional excise tab (RG23C)
here fill the details and pass the entry for exactly the double of the credit to be taken. In this example, pass an entry for 100.
This ensures that Rs.50 goes to the Cenvat of hold account and the remaining Rs.50 goes to the normal excise accounts. This amount of the second Rs.50 is not required and so we have to reverse it using J1IH - Other Adj (RG23A).
With that you would have the opening balance of the Cenvat of hold in SAP and then you can utilize it.
If you say that you do not want to upload the opening balance and still want to take credit of the remaining 50%, then I feel that there is something fundamentally wrong in the upload of the opening balances as the opeining balance sheet would not tally.
Hope that answers your question
Thanks and Regards
Venkatesh A K

Excise reversal on Capital goods

I am facing a problem in Excise. The client has taken a wrong credit of asset in a dealers transaction.
MIGo Done
J1iex - Credit taken.
The client wants to reverse the transaction since the credit is taken more. 50% credit has gone to credit on hold.
We tried by reversing the 50% credit using J2I8 & then reverse the 100% credit taken in J1IH (Other Adjustment) & then take the credit in J1IH (Addational Excise) But at time of doing MIRO the Excise amt is the original amount of J1iex & system is not taking the new amt as taken in J1IH (Addational Excise).
Pls suggest how to reverse the original entry of excise & pass the entry for the correct amt of excise & also the same amount should appear at time of doing MIRO (For Capital Goods.)
Kindly revert...

Dear,
The reversal entry done by J2I8 and the adjustment entry done by J1IH would not impact the J1IEX document posted. Hence the MIRO would still be representing the values of the J1IEX posted values. The excise value can be adjusted in the inventory value in the MIRO line item or can be adjusted in the unplanned delivery cost under details tab in MIRO (depending on the sales tax/VAT implications).
Hope it works.

EXCISE ON CAPITAL GOODS

hi
    "for capital items 50% of excise duty is available for credit immediately ,50% in next financial year ,some time credit can be taken in same year IF
1 P O RETURN FOR OF CAPITAL
2 STOCK TRANSFER TO ANOTHER PLANT"
CAN ANY BODY EXPLAIN ME ABOVE SENIRO WITH EXAMPLE
WITH REGARDS
HARDIK
Edited by: hardik_khandelwal on Sep 17, 2010 1:32 PM

Hi,
for capital items 50% of excise duty is available for credit immediately , 50% in next financial year ,some time credit can be taken in same year IF
1 P O RETURN FOR OF CAPITAL
2 STOCK TRANSFER TO ANOTHER PLANT"
During MIGO u2013 Part I Posting
S- Debit     KBS
H-Credit     WRX     PL-Vnd-Mtl
During Excise Posting- Part II
S- Debit     CENVAT OH
S- Debit     CENVAT on CG-SEC
S- Debit     CENVAT on CG-BED
S- Debit S     CENVAT on CG-ECS
H-Credit     PL-Vnd-CENVAT
Transfer of credit for Capital Goods for next year u2013 J2I8
H-Credit     CENVAT OH
S- Debit S     CENVAT on CG-SEC
S- Debit S     CENVAT on CG-BED
S- Debit S     CENVAT on CG-ECS
Then you can send or sell the Asset in current finincial year but before that make sure that it has to retire in FI.

Cenvat credit of Capital goods

Hi,
From the last year 2011, I heard that the cenvat credit for capital goods can be taken 100 % in the first year itself.
How to the make the changes accordingly so that the 100 % tax amount goes to cenvat account instead of posting 50% to cenvat account & 50 % to cenvat on-hold account and then doing J2I8 to transfer of credits from cenvat on-hold account to cenvat account.
Regards
Madhusudan

Any solutions??
regards
Edited by: madhusnb4 on Jan 23, 2012 1:27 PM

Cenvat on Capital Goods

Hi all,
Whenever credit on capital goods need to be availed, you can claim 50% of credit at the time of receipt by specifying ‘Yes’ in the ‘Claim CENVAT.
Now I want to know that where I have to setup / define the percentage of CENVAT credit the user wants to take immediately on PO receipt of the goods.
regards
Sanjay

Hi
I know the standard scenario for Excise and its related settings. Our system is also working absolutely fine for the 50% Cenvat credit utilization.
But the customer wants to have a process like that of as I had explained earlier.
Can you suggest whether it is possible.
Thanks,
Chaps

Posting of cenvat credit of 50% on capital goods through T.Code:J1IH

Hi
Please advise me the procedure for posting of cenvat credit of 50% on capital goods through T.Code:J1IH.
As a matter of fact, when i tried to post the last year credit of 50% cenvat credit on capital goods the system accepting 50% only.
For example, last year we got Rs.200000 as cenvat credit and out of that 50% credit of Rs.100000 got availed last year. In this year when i tried to avail of remaining of Rs.100000 through transaction code J1IH system is accepting 50% of Rs.100000 i.e only Rs.50000 is accepting.
I look forward for your reply
Thanks and Best Regards
Shekhar
Edited by: Shekhar Yecham on Sep 16, 2008 8:54 PM

Hello,
The settings before 01.04.2010 were same. However, after thorough checking of the GL A/cs, I have following observations -
1) Plant 1 - Balance as on 31.03.2010 in Cenvat on Hold A/c -Rs. 195080. It is upload balance & t.code used is FBVB
    There are some more transctions in this A/c which are reversed due to wrong entries.
    Balance in Excise Duty RG 23 C as on 31.03.2010 - NIL
2) Plant 2 - Balance in Cenvat on Hold A/c as on 31.03.2010 is Rs. 166701. Again this is an upload balance with FBVB
    Balance in Excise Duty RG 23 C as on 31.03.2010 - Rs. 56931.62
3) Plant 3 - No upload balance. All the transactions are routed through J1IEX except 1 from FB01
    Balance as on 31.03.2010 - Cenvat On Hold A/c - Rs. 86876.06
                                                 ED RG 23C - NIL
Hence, would like to know -
1) Any separate procedure to take the credit of upload entries?
2) If the Balance in ED RG 23C A/c is NIL, will it affect on taking credit?
Thanks & Regards,
Reshma

Capital goods

Similar Messages

Maybe you are looking for