Capital transfer goods

Hi CIN Experts,
When I have transfer the capital goods transfer on credit to next year through J2I8, but some of the entry has not been transfer to the current Cenvat On Hold account. In J2I8, I have given co. code, plant, posting date & excise group & selected list based on part 2 number. At the time of transferring, only SED available amount are not transferring means on that row BED, AED, SED, ECS, SECESS-Available but are not transferring. So here I am getting error that u201CBalance has occurred 'INR' with the following details in transaction currencyu201D. Exchange rate '00', amount ' 87.77-' and currency key 'INR'. The data in the transaction currency were transferred from the calling application.
Procedure- The error is probably in the calling application. Message No.-F5702. Please advice how to transfer the balance amount.
Regards,
Crompton

qwkfiqewhoinfoin

Similar Messages

Problem in capital transfer (cml)

Hi Guys,
I am working on SAP Erp 4.7. The module is CML. I am doing capital transfer using transaction FN8X. When I select transfer date and Target loan and I try to do posting , then i get error messge "Flow could not be created due to errors".
I am unable to understand the problem. I gave a lot of time and still I am unable to get thru.
Would be grateful if anyone can help.
Thanks,
JG

Sona....here is some basic information on the off-cycle batch process that will help you with your issue.
http://www.se80.co.uk/sapreports/r/rpuo/rpuocb00.htm

Transfer goods from sales order to own unrestricte stock

Hello,
does someone knows a way to transfer goods from sales order stock to own unrestricted stock.
MB1B is not good, because I have to transfer each material separately with 411E.
I want to transfer all materials in one step.
Thx a lot!

Hi,
Create a LSMW and transfer
Regards,
Vikas

Regarding billing of stock transfer goods

Hi Gurus,
I am facing problem during billing of stock transferred material in CIN Process.
In billing of material in VF01 it shows ZERO Amount.
I have configured as per requirement. Thedetal process is as follows
1.Stock Transfer   ME27
2. Delivery            VL10G
3. Post good issue VL02N
4. Billing               VF01
In billing it shows zero amount.
Kindly guide me where i am going wrong.
Regards
Hemu.

hi,
I am working on Depot transfer.
While in billing i am using billing type JEX Excise invoice India
Regards
Hemu

Transfer Goods Recepient from SRM to R/3

Dear SRM Gurus,
Is it possible to transfer the Goods Recepient from SRM to a standard table (for POs) in R/3?
I ask this because we have implemented some customized ABAP in R/3 which sends emails to the requestor of a shopping cart when there is no delivery after 2 days the delivery days has past.
Now we want to change this so that the email will be send to the goods recepient as he/she is the person that will enter the goods receiving in the system.
Thanks in advance for your reply.
Best Regards,
Jean-Pierre

Hi,
Not sure why the email is being sent out from R/3. I guess you could have easily used prgrams RSWUWFMLEC and RSCONN01 to send out the email reminders from SRM itself.
However, for your current situation, to transfer the Goods Recepient from SRM to R/3, will involve huge customization effort, as this field doesnot exist on any of the EKPO, EBAN tables
Step 1: Create a Z Field in both EBAN and EKPO
Step 2: In the PR or PO transfer, you can use one of the follow on doc BADI in confuntion with BAPI_PO_CREATE1 or 4.6cBAPI_requisition_create...something like that...not sure on the name of the BAPI. So depending on your version you can find out the relevant BAPI info.
Step 3: Once this field is populated from SRM to R/3, you can customize your email notification program to send out the notification to the Goods Recepient.
I still feel you should handle this in SRM to keep things simple !
Pls Assign points if answer is usefull !
Sundeep

DTW Bin Location - Inventory Transfer / Good Receipts

Hi Everyone,
I don´t found Template or Field Link BinLocation on Inventory Transfer and Good Receipts,
Someone have Idea?
Very Thanks

Hi Douglas,
Please check below links.
Trying to create Stock Transfer from one Bin Location to another Using DTW SAP B1 9.0 PL05
DTW for Bin Locations in Goods Receipt
Where is the DTW Goods receipt bin location information template
Bin Locations in SAP Business One 9.0
http://help.sap.com/saphelp_sbo900/helpdata/en/45/221d5373c80108e10000000a114a6b/content.htm
http://help.sap.com/saphelp_sbo900/helpdata/en/45/22e90473c80108e10000000a114a6b/content.htm
Hope this help
Regards::::
Atul Chakraborty

Report to check the stock transfer goods receipts

Hi,
We do stock stansfer from plant to plant using UB PO type and using 351 and then do the MIGO for Goods receipt.
User would like to check the list of Goods receipt done from a specific plant XYZ, HOW to check this? as there is no option available in MB51 for the supplying plant.

There's no standard report which fully covers your requirement. If MB51 is no acceptable for you, you have to create your own report. E.g.
- SQ01/SQ02 --> using data tables MKPF & MSEG
- you can also copy MB51 (MB51 --.> ZMB51; program: RM07DOCS) and modify it according to your requirement (add desired field(s) to selection screen and layout.
/issuing plant is stored in MSEG-UMWRK/

Set Off - Stock Transfer Goods Receipt Clarification

Hi,
There is answer that SET-OFF of Excise Duty is registered only sales to customer, is it accounting document which is registered on J1IIN?
And, accounting document is not registered on J1IJ in case it is claimed from DEPO to customer. Why is it?
Please help me on this..
Thanks
KB

HI,
DEPOT is not allowe for any set off because it just recieves and issued goods from the depot....excise rule says you can only claim creadit when you have done any process or value addition on the material...so in Depot you do not do any of value addition or further processing....
Regards,
Chintan Joshi

How to control the goods receive in Cross-Company Stock Transfer process?

Hi,
we use the standard Cross-Company Stock Transfer process to transfer goods between company, we have a issue, for example transfer order quantity(po) is 10 pc, devlivery order quantity is also 10 pc,but only issue 5pc.and then we use mb01 to receive goods.It can receive 10 pc!? is there anything wrong with my configuration?
Regards,
lance

Hi,
Can you explain WHY Cross-Company STO's can still be received by referencing the PO even if this has not been Goods Issued?
It has also occurred in our set up that the PO qty is 1000, GI was only 500, GR is also 500, but the remaining 500 can still be received even if it wasn't issued (referencing the PO).
Regards,
Lee

No transfer exists for goods receipt reference(From ECC to SNC )

Hi All,
We are facing one issue in ECC and SNC while transferring Goods Reciept Information to SNC via ECC.
We recieved ASN information from SNC and did Goods Reciept against ASN via Inbound delivery.
Now when we used the report RSMIPROACT to transfer Goods Reciept Information it is giving message
"No transfer exists for goods receipt referenc".
I did all setting like
I ticked check box for Goods Reciept Reference and Delivery03.
Source list is maintained and also Message type STPOD is configured for Logical system.
Please can some one help me in telling me why system is not selecting any PO for transfer of GR information even tough Goods Reciept is done for PO.
OR
Is there anyotherway where we can send the Goods Reciept Information from ECC to SNC
Thanks and Regards
Raghavendra Pai

Hi Raghavendra ,
Make sure in We20 following setting is required:
Go to your partner type LS (logical system) and create outbound parameter:
Message Type:STPPOD
Receiver Port:<Your port number> which connects to PI from ECC
Transfer IDoc Immed checked with Output mode=2
Basic type:DELVRY03
Checked Cancel Processing After Syntax Error.
No other setting is required in above outbound parameter.
Go to RSMIPROACT report
You need enter following data:
1)Plant
2)MRP area of plant
3)If want for all material then enter * or enter list of materials
4)Enter target system (SNC system)
5)checked only Goods receipt Reference
6)In execution parameter select Update run radio button
7)Log select log complete report
8)IDoc type DELVRY03
Lastly main thing is GR date enter GR date.
When you execute RSMIPROACT report you will get this message "No transfer exists for goods receipt reference" then it will ask whether you want to change your selection click on <b>NO</b>.
Now check whether IDoc is got triggered or not?
Let me know for any clarification.
Thanks,
Nikhil

Report for Missing qty in stock transfer

how to Create a Missing Quantity list that gives the difference between sent and received quantities during Stock transfer. and send me tables involved in that, primary keys also

suppose, if we transfer goods from plant to plant or St loc to st loc with in one plant, if some goods missed due to some problems, i need that info.
diff beteen sending stock of plant 1 and receiving stock in plant2
Where can i gte all this fields

Transfer posting from one plant to another plant

Friends i want to transfer goods from one plant to another plant of same company code and iam trying this one in transaction migo if post for this it gives an error
"posting only possible in periods 2006/05 and 2006/04 in company code" what error it is

Hi,
Use the MMPV to open the new posting period date.
here you have to use your company code & Current date , then execute to open the new posting period.
while running this transaction you ensure that GR open screen should be closed.
hope it helps....
manoj Singh

Cost of Goods sold in cross company sales

Hi ,
We have a situation where we need to transfer goods from one company code and site ( Company A ) to another company code and site ( Company B )at the cost price of company A. We are creating a purchase order for this goods from Company B to Comapny A and in turn a sales order is issued for this from Company A.We pick up purchase price in PO from as the Per unit cost of comapny A.
The issue arises here about in the delivery from company A where the cost of goods sold in delivery is done based on the total stock value divided by the quantity sold as this is SAP method of calculation and this does not always match with the per unit cost. Currently we are passing this difference as discounts.
This is the best we could achieve where by we have been able to satisfy the business need of having no difference on the purchanse price of company B and sales price of company A.
My question is : Whether is there any more effecient method of achieving the desired result without having the difference which we are currently passing on as discounts ???
Would really appreciate any help.
Thanks and Regards,
Kartik Shah

Hi Raj/ Mahendro,
Thank you for sending me the reply. I will briefly explain you the our process. The purchase from external vendor is done in warehouse belonging to one company code. The purchase is done at Moving average price but normally for an article there are no price variations. Goods receipt in warehouse is done after adding freight and insurance onto the cost of article.This is the value at which we want to transfer to another site in anotehr company code.
Now the replneshiment requirement from the other site which belongs to different company code raises a PO on to the warehouse. This PO picks up the article price (KOMV-KBETR) as the MAP from the warehouse (MBEW-VERPR). However the field MBEW-SALK3 for the warehouse is not exactly the quantity multiplied by MAP.It is actually the VERPR field which has the value based on the field SALK3 divided by the stock quantity and rounded off to the two decimal places. There is slight variation here itself due to the rounding of the total stock value and then again rounding at the per unit price.( Both the above fields of MBEW)
What we are doing on the sales order is to pass the MBEW-VERPR as EDI1 and the sotck value for the quantity ordered ( ZDEI a new condition) by the site as MBEW-SALK3 divided by the total stock at that point and multiply by the quantity ordered. So due to rounding differences there is difference in the value of EDI1 and ZEDI . Again during the billing from warehouse this condition ZEDI picks up the stock value based on the quantity delivered.
Since there are minor differences due to the rounding of values between per unit price and the actual stock value this are being passed off as discount and the payables by the ordering site and receivables from the warehouse are the same. Cost of goods sold from warehouse is the actual stock value being sold which is the revenue for the warehouse.
Even if we use the standard SAP stock transport order with billing how could we ensure that we do not have even this minor differences.
Doing away with another document is not the requirement since we already have automated the process of sales order creation from the pruchase orders.
Do you think we can achieve our requirement using SAP standard process? Except for this rounding differences we are fine with the current process as well.
Do Look forward to your answer.
Warm Regards,
Kartik Shah

Cost of goods sold duing cross company sales

Hi ,
We have a situation where we need to transfer goods from one company code and site ( Company A ) to another company code and site ( Company B )at the cost price of company A. We are creating a purchase order for this goods from Company B to Comapny A and in turn a sales order is issued for this from Company A.We pick up purchase price in PO from as the Per unit cost of comapny A.
The issue arises here about in the delivery from company A where the cost of goods sold in delivery is done based on the total stock value divided by the quantity sold as this is SAP method of calculation and this does not always match with the per unit cost. Currently we are passing this difference as discounts.
This is the best we could achieve where by we have been able to satisfy the business need of having no difference on the purchanse price of company B and sales price of company A.
My question is : Whether is there any more effecient method of achieving the desired result without having the difference which we are currently passing on as discounts ???
Would really appreciate any help.
Thanks and Regards,
Kartik Shah

Hi Christian,
Thank you for sending me the reply. I will briefly explain you the our process. The purchase from external vendor is done in warehouse belonging to one company code. The purchase is done at Moving average price but normally for an article there are no price variations. Goods receipt in warehouse is done after adding freight and insurance onto the cost of article.This is the value at which we want to transfer to another site in anotehr company code.
Now the replneshiment requirement from the other site which belongs to different company code raises a PO on to the warehouse. This PO picks up the article price (KOMV-KBETR) as the MAP from the warehouse (MBEW-VERPR). However the field MBEW-SALK3 for the warehouse is not exactly the quantity multiplied by MAP.It is actually the VERPR field which has the value based on the field SALK3 divided by the stock quantity and rounded off to the two decimal places. There is slight variation here itself due to the rounding of the total stock value and then again rounding at the per unit price.( Both the above fields of MBEW)
What we are doing on the sales order is to pass the MBEW-VERPR as EDI1 and the sotck value for the quantity ordered ( ZDEI a new condition) by the site as MBEW-SALK3 divided by the total stock at that point and multiply by the quantity ordered. So due to rounding differences there is difference in the value of EDI1 and ZEDI . Again during the billing from warehouse this condition ZEDI picks up the stock value based on the quantity delivered.
Since there are minor differences due to the rounding of values between per unit price and the actual stock value this are being passed off as discount and the payables by the ordering site and receivables from the warehouse are the same. Cost of goods sold from warehouse is the actual stock value being sold which is the revenue for the warehouse.
Even if we use the standard SAP stock transport order with billing how could we ensure that we do not have even this minor differences.
Doing away with another document is not the requirement since we already have automated the process of sales order creation from the pruchase orders.
Do you think we can achieve our requirement using SAP standard process? Except for this rounding differences we are fine with the current process as well.
Do Look forward to your answer.
Warm Regards,
Kartik Shah

Transfer photo tags from N900 to N8

Hi,
the title says it all. On one side you have the N900 with photos taken and tagged and on the other you have the N8 where you want to transfer the photos with the tags.
If the photos are just copied to the N8, you will not have the tags recognized for some reason although the tags are to be found in the EXIF, checked some photos copied in the N8 from the N900 and they all have the tags in it.
Creating the tag afterwards in the N8 does not help either.
Any suggestion welcome.
Best regards,
Max.

Use Image Capture app to upload photos and transfer them to any new or existing file or location. You can set IC to remove the photos from iphone or any other camera cards after transfer. After previewing and deleteing unwanted photos, transfer good ones to iphoto or other app. I clear my cameras quite often after taking 100s of photos each day. Enjoy.....

Capital transfer goods

Similar Messages

Maybe you are looking for