Capture Now Doesn't work

I recently had audio dropout problems when shooting an event...it was my camcorder's fault....my brand new Sony PD170 ended up getting repaired. Now I'm trying to log and capture the tapes. I have batch captured some of the footage but have been having trouble capturing some clips...it's always the clips with glaring dropout issues. When I try to batch capture these clips they remain offline. I figured it might be a timecode issue, so I tried capturing the offline clips using "capture now." The first clip I tried to capture ran about 5 seconds with no problem and then stopped and I received the message "Capture encountered a problem reading the data on your source tape. This could be due to a problem with the tape. Capture has been aborted and your clip has been saved."
For your information, I know how to do a "Capture Now"....am just experiencing problems for the first time now. Also, want to mention that under User Preferences, I UNchecked "Abort ETT/PTV on dropped frames" and I UNchecked "Abort capture on dropped frames." Under System Settings I checked "Limit Capture Now to 30 mins."
Am I doing something wrong or does it make sense that due to my camera problems I will never be able to capture some of the footage? Thanks so much for your help.

'Problem Ticket' huh? That's good, Patrick. When I worked for the telephome company in Washington, D. C., three or four lifetimes ago, we called them Trouble Tickets.
I might incorporate that phrase into this current thread, when I revise it in v2:
http://discussions.apple.com/thread.jspa?threadID=405837&tstart=0

Similar Messages

FCP 7, 'Capture Now' suddenly stops working

I have been capturing footage from several tapes for many days now, with zero problems. I started doing some more today,
also with no problems, until about the 4th capture attempt. Suddenly, when I hit 'capture now' during playback, nothing at all
happens. I have more than 2TB of free space on my scratch disk, and no capture settings have been changed. I can control
the deck just fine, so communication between the deck and FCP is not an issue. But it literally went from being fine for one clip,
and completely non responsive for the next. I closed FCP, powered down the camera, re-seated the firewire cables, turned the
camera back on and re opened FCP. Same thing. 'Capture Now' doesn't do a thing. I have imported more than 15 tapes without
a single issue, now suddenly I am dead in the water. What am I missing?
I am using a Sony HC-1 with DV footage; Easy Setup set to DV NTSC, Device Control to Firewire NTSC. As I said, device
control works perfectly, but capture suddenly will not initiate. It's as if the 'capture now' button just went dead,
so to speak.
HELP!!

Trashing preferences did the trick, and that app was great. So I was able to get up and running again and get a few more tapes imported. But NOW...
I put in another tape this afternoon, and now when I hit 'capture now' it appears to start the capture, goes for approx. 1 second, then stops and says "searching for media". Nothing I have tried solves this problem. I have powered everything down, unplugged/replugged everything, no help. SO frustrating!
'Lil help??
Ben

HT4623 my IPOD is using version 5.1.1 and says it is up to date. One of my apps updated for IOS7 and now doesn't work on my IPOD. What can I do? It is a podcast app that I use every day.

My IPOD touch is using version 5.1.1. and no updates available. I use a podcast app which I listen to every day. The app updated for the new IOS7 and now doesn't work for me any more.

All yo can do is either find a compatible app that works for your 3G iPod (iOS 5.1.1) or purchase a new model iPod.

HT204053 I changed my AppleID in System Preferences, but the old ID comes up under iCloud and I get an error box saying my "ID or password are incorrect". How do I get rid of the old ID which now doesn't work with either my old or new password??

I changed my AppleID in System Preferences, but the old ID comes up under iCloud and I get an error box saying my "ID or password are incorrect". How do I get rid of the old ID which now doesn't work with either my old or new password??

Yes that makes sense, however have you updated it at My Apple ID before trying to change it in your system preferences > iCloud settings, you must do that first.

Downloaded applications in my iPad2 now doesn't work

All my downloaded applications in my iPad2 now doesn't work, can somebody tell me what went wrong?

Is there any activity you have done on the iPad recently that is out of the ordinary? Or even an update?
Check to see if any apps have updates that fix the problem.
First, I would recommend doing a reset. No data will be lost. Hold the home and power buttons at the same time until the Apple boot logo appears.
The next step (if not fixed) is to restore in iTunes. First try restoring from a backup, then you may have to set up as a new iPad if that doesn't work.

Since installing CS6, Acrobat Pro X fails I had to reinstall it a few times, now doesn't work

Since installing CS6, Acrobat Pro X failed a few times. I had to reinstall it a few times, now doesn't work at all even after installing again.

Hi there
Thank you for your reply.
When I click on the link for the cleaner however, before I can download the
file, it gives me this message:
"Important - This tool is not for use with any creative suite products
including suites that contain Acrobat. It can only be used with standalone
versions of Acrobat and Adobe Reader"
Adobe X Pro forms part of my Adobe Creative Suite 6 Design Standard?
Please advise.
Thanks
Nandi

Capture now doesn't react

I'm using an oldfashioned SONY HVR-A1E recording on tapes and I've used Final Cut Express with Capture / Now for some time and it worked fine. I always had problems using Log and Transfer, it just couldn't find my camera (there was nothing in the preview window). I can't locate my camera anywhere on my mac. I'm connecting my camera via a firewire to an external harddisk, which is connected to my Mac - it worked with Capture / Now before, but could that be the problem?
For some reason the NOW button just doesn't react when I open Capture. I can't seem to recall doing anything differently. It would be nice if I could get the log and transfer to work by locating my camera - but at the very least just get the NOW button in the capture window to again - hope anyone can help ;o)

Thanks for your quick reply
My camera is set for DVsp and it says DVin iLINK on the display of the camera - when I plug the firewire cable.
I've set the Easy Setup in FCE at (format) PAL and (use) DV-pal (I'm in Europe, but I'm using my material for web, so if other formats work better it could be different). I've tried different options within all formats and HDV doesn't respond at all so I guess DV is the right format for the recording on my camera.
I can se and hear my recordings in the capture preview window but the NOW button just doesn't respond. When I try to set the timecodes to capture a minute - (for instance from 00:38:42:00 to 00:39:42:00) the in- and out timecodes just align to the end point (from 00:39:42:00 to 00:39:42:00) using the button CLIP it doesn't capture anything.
Very frustrating. Now I'm just capturing my footage via iMovie and importing it to FCE, but I wish this could be solved.

My Apple ID is changed from hotmail domain to icloud how come? and my mobile now doesn't work

I have iPhone 4 i make rest to delete data my Apple id: ****** the mobile change the domain to the same usr name @icloud.com how come? and my mobile doesn't work now and my recovery email dont work also. how can i activate my iPhone and use it pls?
<Email Edited By Host>

Contact iTunes by:
Contact iTunes

Capture now doesn´t respect tc

Why when I capture through of capture now with firewire doesn´t respect the tc of my camera?
Thanks a lot.

Well, if you have device control set to UNCONTROLLED DEVICE, that ignores timecode. Device Control must be set to Firewire NTSC (or Firewire PAL for Europe), or Firewire BAsic.
Shane

Capture Now doesn't capture all

I just starting using HD. The Capture Now is not capturing the whole tape. Plus, it captures segments and numbers them. How do I get it to capture the whole tape?

If there are breaks in the recording, FCP makes new clips by default.
You can change this behavior in preferences:
http://support.apple.com/kb/TA23293?viewlocale=en_US
In general, it's best not to use Capture Now, since you can lose frames.
It's best to set an in point and and an out point, and use Capture Clip.
Here's some good advice on capturing HDV:
http://www.kenstone.net/fcphomepage/capture_hdv_prores_fwbalis.html
Of course, you still haven't told us what format you are using.
You'll get better answers if you supply more details.
Since you said "tape" we assumed you're using HDV.

I just made update to iOS 7 on my iphone 4 and now doesn't work anymore the left side button of ringtone why??

Update to iOS 7.0.4 and ringtone button doesn't work anymore, why???

Double click home button, then swipe up on app picture (not the icon itself)

Capturing now, doesn't capture anything...

Hi:
I've got a problem capturing HDV footage with my Z1 under Final Cut 5.2. As I've got lot of Gigas of dsk space and didn't have too much time I made a full tape capture using Capture Now.
The tape began to capture and preview windows said that was capturing, but after the tape arrived at the end no clip appeared at the browser and capture files appeared at Finder unexpectedly small and they didn't even run.
Has had anyone else the same problem? What have you done?

I used the HDV 1080i50 easy setup, that is the way I shooted.
Yes, the video was showing during the capture, and told that was capturing, but after the tape arrived at the end nothing was captured. Even if you tried to esc in the middle. This happens randomly.

Changed DVD drive from Region 1 - 3 now doesn't work

I rented a movie that ha a region 3 code set in it.
I changed my DVD drive to region 3 to watch it.
It worked fine.
But now It is not mounting at all.
And when I open DVD Player, DVD player says " A valid DVD drive could not be found [-70012]
So what should I do now?

Spontanously works again. I think it's because i zapped the P-RAM...
if it worked... or i just restarted.

After trying to install last update my itunes now doesn't work- have tried reinstalling and it gets struck saying mobile device not responding. Itunes says unable to successfully install itunes.

After a message on my computer to install an update a few days ago- I now can't open Itunes and have a message saying a module isn't working and I need to re install Itunes. However when I try to reinstall Itunes I keep getting an error message saying mobile device not working and then a message saying unable to install itunes. Any clues- Is apple stuffing up agian or is my computer mis behaving?

Try a more recent version of my advice. The "for older video cards version" may work when the default version doesn't.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

Auto Update Server 4.2 funktion update now doesn't work

hello,
in the new 64 Bit version I got the follwoing error if I using the the update now funktion.
HTTP Status 500 -
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
javax.servlet.ServletException: Servlet execution threw an exception
com.cisco.nm.cmf.util.AccessLogFilter.doFilter(AccessLogFilter.java:128)
root cause
java.lang.NoClassDefFoundError: Could not initialize class com.cisco.nm.callhome.executor.RequestAutoUpdateScheduler
com.cisco.nm.callhome.executor.DeviceExecutor.callHomeImmediate(DeviceExecutor.java:1850)
com.cisco.nm.callhome.ui.application.CHAccess.ForCH(CHAccess.java:556)
com.cisco.nm.callhome.ui.action.s100.perform(s100.java:400)
org.apache.struts.action.ActionServlet.processActionPerform(ActionServlet.java:1786)
org.apache.struts.action.ActionServlet.process(ActionServlet.java:1585)
org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:509)
javax.servlet.http.HttpServlet.service(HttpServlet.java:709)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
com.cisco.nm.cmf.util.AccessLogFilter.doFilter(AccessLogFilter.java:128)
note The full stack trace of the root cause is available in the Apache Tomcat/5.5.17 logs.
In old 32Bit Version it was working fine.
Any idea ?
Best regards
Steffen

Hello ,
some additional infomation.
the first time after reload the server I got the message IA32bit.dll can't load on a 64bit system.
alle addtional tries a got the internal error.
It seem for me there is an old 32bit- dll in the CSM 4.2.
First error message:
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
javax.servlet.ServletException: Servlet execution threw an exception
com.cisco.nm.cmf.util.AccessLogFilter.doFilter(AccessLogFilter.java:128)
root cause
java.lang.UnsatisfiedLinkError: C:\Program Files (x86)\CSCOpx\MDC\bin\SSLClient.dll: Can't load IA 32-bit .dll on a AMD 64-bit platform
java.lang.ClassLoader$NativeLibrary.load(Native Method)
java.lang.ClassLoader.loadLibrary0(Unknown Source)
java.lang.ClassLoader.loadLibrary(Unknown Source)
java.lang.Runtime.loadLibrary0(Unknown Source)
java.lang.System.loadLibrary(Unknown Source)
com.cisco.nm.callhome.executor.RequestAutoUpdateScheduler.(RequestAutoUpdateScheduler.java:308)
com.cisco.nm.callhome.executor.DeviceExecutor.callHomeImmediate(DeviceExecutor.java:1850)
com.cisco.nm.callhome.ui.application.CHAccess.ForCH(CHAccess.java:556)
com.cisco.nm.callhome.ui.action.s100.perform(s100.java:400)
org.apache.struts.action.ActionServlet.processActionPerform(ActionServlet.java:1786)
org.apache.struts.action.ActionServlet.process(ActionServlet.java:1585)
org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:509)
javax.servlet.http.HttpServlet.service(HttpServlet.java:709)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
com.cisco.nm.cmf.util.AccessLogFilter.doFilter(AccessLogFilter.java:128)
note The full stack trace of the root cause is available in the Apache Tomcat/5.5.17 logs.
second, third .... error message
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
javax.servlet.ServletException: Servlet execution threw an exception
com.cisco.nm.cmf.util.AccessLogFilter.doFilter(AccessLogFilter.java:128)
root cause
java.lang.NoClassDefFoundError: Could not initialize class com.cisco.nm.callhome.executor.RequestAutoUpdateScheduler
com.cisco.nm.callhome.executor.DeviceExecutor.callHomeImmediate(DeviceExecutor.java:1850)
com.cisco.nm.callhome.ui.application.CHAccess.ForCH(CHAccess.java:556)
com.cisco.nm.callhome.ui.action.s100.perform(s100.java:400)
org.apache.struts.action.ActionServlet.processActionPerform(ActionServlet.java:1786)
org.apache.struts.action.ActionServlet.process(ActionServlet.java:1585)
org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:509)
javax.servlet.http.HttpServlet.service(HttpServlet.java:709)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
com.cisco.nm.cmf.util.AccessLogFilter.doFilter(AccessLogFilter.java:128)
note The full stack trace of the root cause is available in the Apache Tomcat/5.5.17 logs.

Capture Now Doesn't work

Similar Messages

Maybe you are looking for