Capture screen selection area
Hi friends
I want to capture a screen selection area(mouse selection) as a image Bitmap data.......I know i can select Bitmap from a image or a component. I want to select it regardless of component area or image........How to do it.... please help
Regards,
Leslie
Use BitmapData.draw from the root or systemManager and set up the
coordinates correctly.
Similar Messages
-
How to capture a selected area on iphone 5s instead of a full screen capture?
Just wonder, does anyone know how to screenshot of a selected area instead of a full screenshot on iphone?
Thanks.you can use the iphones default photo app.open photos app in you phone, go to the picture and click edit on the top right corner, the options are listed below
-
Selection screen fields are not getting detected in an infoset in code
Hi All,
I am developing an infoset query using logical database 'PNPCE'. I am facing problem while writing a validation on selection screen fields on an infoset query at infoset code level.
The fields that are under program specific selection are determined at runtime with variables viz. SP$00001, SP$00002 etc. There are actually select options on selection screen of an infoset query.
So I cannot write a direct code on these fields as they do not exist at infoset level and hence cannot be detected.
I want to put down a validation that if user does not select anything on selection-screen and executes the query, then he should get a pop-up message 'Narrow down your search...' and he should go back to selection screen again.
Is there any alternative way to achieve this?hi,
Your Screen resolution is more in the system that's why while creating it was fine and while executing it was gone after the next field.
so you better create a frame and place that inside it or you can change cols size in the properties about the columns you want -
Selection screen fields are not clearing..!
Hi all,
I have created one report which is having a selection screen with four select-options.
Now after executing the report, when i click on "back" icon the selection screen entries are not clearing even i refresh the select-options also.
Could any body please help me to resolve this issue??
Regards,
Joshu.Hi,
Use FREE MEMORY after the report is printed..
Check this example..
PARAMETERS: P_MATNR LIKE MARA-MATNR OBLIGATORY.
START-OF-SELECTION.
WRITE: / P_MATNR.
FREE MEMORY.
Thanks,
Naren -
Black capture screen in Win 7 unless aero themes are turned on
I have discovered through trial and error that unless I disable Aero themes on my powerful Windows 7 laptop, my captures always seem to drop a frame or two despite the souped-up resources I have (super fast processor, 16GB RAM, capturing to second hard drive,etc). By the way, I am capturing through firewire from a Canon XL2 (DV) camera.
However, on other machines on which I have older versions of Premiere Pro installed, I can do this automatically by right clicking on my desktop Premiere Pro icon, choosing the compatibility tab, and putting a check in the "disable desktop composition" tab. This basically toggles Aero off as soon as Premiere Pro starts loading, and toggles it back on when I close it. But this has never worked with Premiere Pro CS6. I have always had to manually disable Aero even though I have supposedly disabled it through the said compatibility tab of Premiere Pro CS6.
That's never been a major problem until now. Now, if PP CS6 is open and aero themes are disabled, I get a black capture screen (I can hear the audio but the capture screen is completely black). But as soon as I toggle aero back on, the capture screen again displays video normally. So, basically, if I intend to capture with PP CS6, I am forced into leaving Aero themes on so that I can monitor my capture, but if I do so, I drop frames. Infuriating.
This seems to be a similar problem to the one I had a few months ago, "I get a black capture screen (preview), but video captures fine. What gives?"
I got no suggestions for that problem other than to "use another application to capture," (UNacceptable since I paid BEAUCOUP bucks for CS6 and I have a perfectly reasonable expectation that it should perform), and "roll back to the previous update" [again, unacceptable, as 1) I have no idea how to do that and 2) updates are issued to resolve other problems, right? So why should I be forced to roll back?]. Sorry, but these didn't help.
That particular problem was apparently "resolved" with a subsequent update, and there were no problems for a while (other than the fact that I could still not disable aero through PP CS6's compatiblity tab). But now, apparently, there has been a further update that has caused this latest problem that never existed before. Please help.Regardless, Premiere Pro should not have an issue if I want to disable Aero themes. CS6 is the only version that apparently does have an issue with it (and, even then, only recently, which leads me to beleive that a recent update is to blame).
I know this because I also have the old, old Premiere Pro 2.0 installed on the same machine. If I disable Aero and then Open PP 2.0, the capture screen is just fine.
But if I disable Aero and first open PP CS6, close it, and then open PP 2.0 instead, the capture screen in PP 2.0 is now black as well, and I cannot get it back unless I reboot. Obviously, when I close PP CS6, some service or other, that I haven't been able to identify so far, is remaining open and affecting PP 2.0.
Again, all prior versions of PP have never had an issue with disabling Aero themes. Why does CS6, all of sudden, absolutely need it enabled in order to work properly (though it doesn't work properly, it drops frames)? -
How to capture the selected values from module pool dialog list box !
Hi experts,
Can anyone help me out in capturing the values from the list box.
i am able to set the values in the list box.But i am not able to capture the selected value from the list box. Always the list box name is getting as "space"
I also tried in using the FM "VRM_GET_VALUES" but it is retireving all the values. Is there is any flag for filttering out the selected value.
Your inputs are appreciated.
Thanks,
Vijay.Along with the PBO and PAI event, add a POV event in the flow logic of the screen
DEMO_DROPDOWN_LIST_BOX -is a good demo example.
PROCESS ON VALUE-REQUEST.
FIELD structure_name-field_name MODULE create_dropdown_box.
In the report :
MODULE create_dropdown_box INPUT.
SELECT carrid carrname
FROM scarr
INTO CORRESPONDING FIELDS OF TABLE itab_carrid.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'CARRID'
value_org = 'S'
TABLES
value_tab = itab_carrid
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3.
IF sy-subrc <> 0.
ENDIF.
ENDMODULE.
In the layout, assign a Function Code , for eg : 'SELECTED' to the listbox and lets say name of the field is SDYN_CONN-CARRID. So in the PAI module,
MODULE user_command_0100 INPUT.
CASE ok_code.
WHEN 'SELECTED'.
MESSAGE i888(sabapdocu) WITH sdyn_conn-carrid.
ENDCASE.
ENDMODULE.
sdyb_conn-carrid will contain your selected field -
Save Picture of Selected area as a file
Using Command Shift 4. Can I specify where the picture saves to in Firefox? I would like to save to iPhoto.
ThanksI was looking for an Applescript solution and noticed that there was an Auto Import command. It said it would start importing from the auto import folder.
So, I started poking around and inside the iPhoto Library is an Auto Import folder (iPhoto '09).
You can change where the screen shots are saved. I use [Secrets|http://code.google.com/p/blacktree-secrets/downloads/list] to set the destination.
First, right-click on the iPhoto Library and choose Show Package Contents. Make an alias to the Auto Import folder inside your Pictures folder (easy way is to hold down cmd+opt while you drag and drop). This also gives you a quick way to drag and drop photos into iPhoto.
Next, open up Secrets (it is a control panel) and choose the Grab library. Click on the spot to change the destination for Screen Captures and navigate to your alias to the Auto Import folder. Now, log out and back in.
Now, when you create a screen capture, it will be saved in the Auto Import folder. The next time you open iPhoto, anything in the folder will be imported.
To change the screen capture location back, just set it to whatever you'd like.
If you only want to do this for a few screen shots, you can fairly quickly import them into iPhoto by selecting them, hitting the spacebar for quicklook, and click on the import to iphoto button.
Finally, I'm not sure why the Auto Import folder is hidden inside the iPhoto Library (iTunes has one too). It might not be ready for prime time, but it seemed to work just fine in my limited testing. -
Multiple line selection and then capturing the selected values
Dear all
in my alv program ,i need to capture multiple line selections using checkboxes.
I have appended check boxes by adding it in the internal table & filling in field catalog.
but problem is i'm not able to capture multiple selected check boxes dynamically,
i could capture only the last selected check box,
option i found was to use class method get-selected-rows,but i'm unable to use it properly, could anyone explain in detail
i have already gone through the various examples in sdn but i am not able to work out.
like using parameters etc....
CAN ANY ONE HELP ME WITH THE CODE
help reqired immediately,
Thanks in advance.Hi Ankur,
In the PAI, just after the selection of your user event, button or menu,
add this code before getting the selected records.
<b>CALL METHOD grid1->check_changed_data
IMPORTING
e_valid = ws_x.</b>
where grid1 TYPE REF TO cl_gui_alv_grid,
Now fetch the selected records.
Check this code for reference
C O M P A N Y C O N F I D E N T I A L **
Care should be taken to prevent its unauthorized use. **
REPORT zfipost MESSAGE-ID f4 NO STANDARD PAGE HEADING .
AUTHOR : Susmitha Susan Thomas
DATE : August 18, 2005
*Abridged Version : This report generates a list in Abap List Viewer of
all the selected records in VBKPF/VBSEG. * *
(TRANSACTION ZPPD:Modified from transaction FBV0)
-- Class definition--
CLASS lcl_event_receiver DEFINITION DEFERRED.
--Tables--
TABLES: vbkpf. " Belegkopf
TABLES: tsp1d, pri_params, spopli.
TYPE-POOLS slis.
---- Global Variables -
DATA: anzkr(6) TYPE n,
lsind LIKE sy-lsind,
no_output(1) TYPE c,
records(1) TYPE c,
xpick(1) TYPE c,
xpickc(1) TYPE c,
xbinp(1) TYPE c,
rc LIKE syst-subrc,
ok_code LIKE sy-ucomm,
index TYPE i,
char_x(1) TYPE c VALUE 'X',
post TYPE c,
ans TYPE n,
user(40) TYPE c.
DATA :BEGIN OF i_doctype OCCURS 0,
blart LIKE vbkpf-blart,
END OF i_doctype.
--AlV Initialization--
DATA: gs_layout TYPE lvc_s_layo,
gt_fieldcat TYPE lvc_t_fcat,
gs_fieldcat TYPE lvc_s_fcat,
gs_index_rows TYPE lvc_t_row,
l_layout TYPE disvariant,
g_repid LIKE sy-repid,
g_max TYPE i VALUE 100,
ws_row_idx TYPE lvc_t_row ,
ws_row_no TYPE lvc_t_roid,
i_excl_func TYPE ui_functions,
ls_prnt TYPE lvc_s_prnt,
refresh TYPE c,
i_fieldcat TYPE lvc_t_fcat,
post(1) TYPE c,
accr_def(1) TYPE c,
rev_cd(3) TYPE c,
ch(1) TYPE c.
DATA: list_index LIKE sy-lsind,
flag TYPE n VALUE 0,
fl TYPE n VALUE 0,
g_container TYPE scrfname VALUE 'GRID_CONTAINER',
grid_container TYPE REF TO cl_gui_docking_container,
grid1 TYPE REF TO cl_gui_alv_grid,
custom_container1 TYPE REF TO cl_gui_custom_container,
event_receiver TYPE REF TO lcl_event_receiver,
gt_vbkpf1 TYPE STANDARD TABLE OF vbkpf WITH HEADER LINE,
i_vbkpf TYPE TABLE OF vbkpf WITH HEADER LINE,
i_ws_row_idx LIKE ws_row_idx WITH HEADER LINE.
---Internal table containing details of selected documents--
DATA : BEGIN OF gt_vbkpf OCCURS 0,
xpick(1) TYPE c,
belnr LIKE vbkpf-belnr,
gjahr LIKE vbkpf-gjahr,
bukrs LIKE vbkpf-bukrs,
blart LIKE vbkpf-blart,
budat LIKE vbkpf-budat,
bldat LIKE vbkpf-bldat,
bktxt LIKE vbkpf-bktxt,
waers LIKE vbkpf-waers,
usnam LIKE vbkpf-usnam,
xblnr LIKE vbkpf-xblnr,
rev_code(3) TYPE c,
rev_rsn(15) TYPE c,
rev_date(10) TYPE c,
linecolor(4) TYPE c,
END OF gt_vbkpf.
--Table to store long text--
DATA : BEGIN OF inline OCCURS 0,
tdformat TYPE tdformat,
tdline TYPE tdline,
END OF inline.
DATA: thead LIKE thead OCCURS 0 WITH HEADER LINE.
-- Records to be posted--
DATA: BEGIN OF tbkpf OCCURS 5.
INCLUDE STRUCTURE vbkpf.
DATA: END OF tbkpf.
---- Constants -
CONSTANTS: awtyp_bkpf TYPE awtyp VALUE 'BKPF '.
CONSTANTS: awtyp_space TYPE awtyp VALUE ' '.
Selection Screen
PARAMETER: funcl LIKE t020-funcl NO-DISPLAY. "P(ost),D(isplay),U(pd)
SELECTION-SCREEN SKIP 2.
SELECT-OPTIONS:
p_bukrs FOR vbkpf-bukrs,
p_belnr FOR vbkpf-belnr,
p_gjahr FOR vbkpf-gjahr,
p_budat FOR vbkpf-budat,
p_bldat FOR vbkpf-bldat,
p_blart FOR vbkpf-blart,
p_xblnr FOR vbkpf-xblnr,
p_bktxt FOR vbkpf-bktxt,
p_usnam FOR vbkpf-usnam.
SELECTION-SCREEN SKIP 1.
SELECTION-SCREEN BEGIN OF BLOCK blk
WITH FRAME TITLE text-010 NO INTERVALS.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(35) text-002.
PARAMETER norm_doc TYPE c
RADIOBUTTON GROUP doc DEFAULT 'X' .
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(35) text-001.
PARAMETER ad_doc TYPE c
RADIOBUTTON GROUP doc .
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(35) text-003.
PARAMETER all_doc TYPE c
RADIOBUTTON GROUP doc .
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK blk.
CLASS lcl_event_receiver DEFINITION
For capturing events on the ALV *
CLASS lcl_event_receiver DEFINITION.
PUBLIC SECTION.
METHODS:
to capture all recently changed data.
handle_data_changed FOR EVENT data_changed OF
cl_gui_alv_grid
IMPORTING er_data_changed,
for hot spot
handle_hotspot FOR EVENT hotspot_click OF
cl_gui_alv_grid
IMPORTING e_column_id e_row_id.
ENDCLASS. " lcl_event_receiver (Definition)
CLASS lcl_event_receiver (Implementation)
For capturing events on the ALV *
CLASS lcl_event_receiver IMPLEMENTATION.
METHOD handle_data_changed.
PERFORM f2200_handle_data_changed USING er_data_changed.
ENDMETHOD.
METHOD handle_hotspot.
PERFORM f2201_handle_hotspot USING e_column_id e_row_id .
ENDMETHOD.
ENDCLASS. " lcl_event_receiver (Implementation)
AT SELECTION-SCREEN
AT SELECTION-SCREEN.
START-OF-SELECTION
START-OF-SELECTION.
---- Colors -
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
-------------------- Status und Title Bar----------------------------*
SET PF-STATUS funcl.
SET TITLEBAR funcl.
-- Read Records--
SELECT * FROM vbkpf INTO TABLE gt_vbkpf1
WHERE bukrs IN p_bukrs
AND ausbk IN p_bukrs
AND belnr IN p_belnr
AND gjahr IN p_gjahr
AND budat IN p_budat
AND bldat IN p_bldat
AND blart IN p_blart
AND bktxt IN p_bktxt
AND xblnr IN p_xblnr
AND usnam IN p_usnam
AND bstat EQ 'V'
AND ( awtyp IN (awtyp_bkpf, awtyp_space) OR
awtyp IS null )
ORDER BY PRIMARY KEY.
----Call the ALV Screen -
PERFORM alv_display.
END-OF-SELECTION.
FORM BELEG_PICKUP *
Indicate changing of the selected external record *
FORM beleg_pickup.
SET PARAMETER ID 'BUK' FIELD vbkpf-bukrs.
SET PARAMETER ID 'GJR' FIELD vbkpf-gjahr.
SET PARAMETER ID 'BLP' FIELD vbkpf-belnr.
CASE funcl.
WHEN 'P'.
IF anzkr IS INITIAL.
CALL FUNCTION 'ZPRELIMINARY_POSTING_POST_D'
EXPORTING
bukrs = vbkpf-bukrs
belnr = vbkpf-belnr
gjahr = vbkpf-gjahr.
ELSE.
IF sy-ucomm EQ 'BUCH'.
CALL FUNCTION 'ZPRELIMINARY_POSTING_POST_ALL'
EXPORTING
synch = char_x
bupbi = xbinp
TABLES
t_vbkpf = tbkpf.
ELSE.
CALL FUNCTION 'ZPRELIMINARY_POSTING_POST_ALL'
EXPORTING
bupbi = xbinp
TABLES
t_vbkpf = tbkpf.
wait up to 3 seconds.
commit work.
ENDIF.
ENDIF.
WHEN OTHERS.
IF sy-tcode = 'ZPPD'.
funcl = 'P'.
ENDIF.
CALL FUNCTION 'ZPRELIMINARY_POSTING_DISPLAY'
EXPORTING
bukrs = vbkpf-bukrs
belnr = vbkpf-belnr
gjahr = vbkpf-gjahr.
ENDCASE.
ENDFORM.
FORM TBKPF_FUELLEN *
Include records for posting in TBKPF *
FORM tbkpf_fuellen.
records = 'X'.
LOOP AT gt_vbkpf.
IF gt_vbkpf-xpick = 'X'.
CLEAR anzkr.
CLEAR records.
IF sy-subrc = 0.
anzkr = anzkr + 1.
MOVE-CORRESPONDING gt_vbkpf TO tbkpf.
APPEND tbkpf.
ELSE.
EXIT.
ENDIF.
ENDIF.
ENDLOOP.
ENDFORM.
FORM MALL *
Select All documents *
FORM mall.
LOOP AT gt_vbkpf.
gt_vbkpf-xpick = 'X'.
MODIFY gt_vbkpf.
ENDLOOP.
refresh = 'X'.
CALL METHOD grid1->refresh_table_display.
ENDFORM.
FORM EMAL *
Unselect all documents *
FORM emal.
LOOP AT gt_vbkpf.
gt_vbkpf-xpick = ' '.
MODIFY gt_vbkpf.
ENDLOOP.
refresh = 'X'.
CALL METHOD grid1->refresh_table_display.
ENDFORM.
Form alv_display *
To display the details on an ALV. *
FORM alv_display.
CALL SCREEN 100.
ENDFORM. " alv_display
*& Module PB0_100 OUTPUT
MODULE pb0_100 OUTPUT.
SET PF-STATUS 'MAIN100'.
SET TITLEBAR 'POSTDOC'.
--To verify that posting is complete.--
---- Setting the layout -
IF grid1 IS INITIAL.
PERFORM fill_table.
-- Initializing the field catalog--
PERFORM fieldcat_init CHANGING i_fieldcat.
-- Initializing the ALV GRID and CONTAINER--
CLEAR gs_layout.
gs_layout-info_fname = 'linecolor'.
gs_layout-grid_title = 'Parked Documents'(100).
gs_layout-zebra = 'X'.
gs_layout-cwidth_opt = 'X'.
gs_layout-sel_mode = 'A'.
gs_layout-edit = 'X'.
l_layout-report = sy-repid.
------ Create a custom container control for ALV Control----
IF cl_gui_alv_grid=>offline( ) IS INITIAL.
CREATE OBJECT grid_container
EXPORTING
dynnr = '100'
ratio = '100'
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
others = 6.
IF sy-subrc NE 0.
MESSAGE i000 WITH text-007. " Error in object creation
LEAVE LIST-PROCESSING.
ENDIF.
-- Create an instance of alv control--
CREATE OBJECT grid1
EXPORTING
i_lifetime = 1
i_parent = grid_container.
---- Disable all unwanted button in the ALV grid -
PERFORM disable_functions TABLES i_excl_func.
---- Call the display function of ALV grid -
CALL METHOD grid1->set_table_for_first_display
EXPORTING
is_variant = l_layout
i_save = 'A'
is_layout = gs_layout
is_print = ls_prnt
it_toolbar_excluding = i_excl_func
CHANGING it_outtab = gt_vbkpf[]
it_fieldcatalog = i_fieldcat.
ENDIF. " IF cl_gui_alv_grid=>offline IS INITIAL
CALL METHOD grid1->register_edit_event
EXPORTING
i_event_id = cl_gui_alv_grid=>mc_evt_enter.
CALL METHOD grid1->register_edit_event
EXPORTING
i_event_id = cl_gui_alv_grid=>mc_evt_modified.
---- Create a reciever object to handle events -
CREATE OBJECT event_receiver.
SET HANDLER event_receiver->handle_data_changed FOR grid1.
SET HANDLER event_receiver->handle_hotspot FOR grid1.
CALL METHOD cl_gui_control=>set_focus EXPORTING control = grid1.
ENDIF. " IF grid1 IS INITIAL.
ENDMODULE. " PB0_100 OUTPUT
*& Form fill_table
Fills the data table to be passed to the ALV grid.
FORM fill_table.
LOOP AT gt_vbkpf1.
MOVE-CORRESPONDING gt_vbkpf1 TO gt_vbkpf.
IF ad_doc = 'X' OR all_doc = 'X'.
thead-tdobject = 'BELEG'.
CONCATENATE gt_vbkpf1-bukrs
gt_vbkpf1-belnr
gt_vbkpf1-gjahr INTO thead-tdname.
thead-tdspras = sy-langu.
thead-tdid = '0004'.
PERFORM read_text.
READ TABLE inline INDEX 1.
gt_vbkpf-rev_code = inline-tdline.
REFRESH inline.
CLEAR inline.
thead-tdid = '0005'.
PERFORM read_text.
READ TABLE inline INDEX 1.
gt_vbkpf-rev_rsn = inline-tdline.
REFRESH inline.
CLEAR inline.
thead-tdid = '0006'.
PERFORM read_text.
READ TABLE inline INDEX 1.
gt_vbkpf-rev_date = inline-tdline.
REFRESH inline.
CLEAR inline.
REFRESH inline.
CLEAR inline.
ENDIF.
APPEND gt_vbkpf.
CLEAR gt_vbkpf.
ENDLOOP.
ENDLOOP.
ENDFORM.
*& Form fieldcat_init
Initialize the field catalog
FORM fieldcat_init CHANGING i_fieldcat TYPE lvc_t_fcat.
DATA: i_fldcat TYPE lvc_t_fcat WITH HEADER LINE.
CHECKBOX
CLEAR i_fldcat.
i_fldcat-fieldname = 'XPICK'.
i_fldcat-checkbox = 'X'.
i_fldcat-key = 'X'.
i_fldcat-tabname = 'GT_VBKPF'.
i_fldcat-outputlen = '4'.
i_fldcat-scrtext_l = 'ChkB'.
APPEND i_fldcat TO i_fieldcat.
CLEAR i_fldcat.
i_fldcat-fieldname = 'BELNR'.
i_fldcat-tabname = 'GT_VBKPF'.
i_fldcat-key = 'X'.
i_fldcat-hotspot = 'X'.
i_fldcat-outputlen = '15'.
i_fldcat-scrtext_l = 'Document Number'.
APPEND i_fldcat TO i_fieldcat.
CLEAR i_fldcat.
i_fldcat-fieldname = 'GJAHR'.
i_fldcat-tabname = 'GT_VBKPF'.
i_fldcat-key = 'X'.
i_fldcat-scrtext_l = 'FYear'.
i_fldcat-outputlen = '5'.
APPEND i_fldcat TO i_fieldcat.
CLEAR i_fldcat.
i_fldcat-fieldname = 'BUKRS'.
i_fldcat-tabname = 'GT_VBKPF'.
i_fldcat-key = 'X'.
i_fldcat-scrtext_l = 'CCode'.
i_fldcat-outputlen = '5'.
APPEND i_fldcat TO i_fieldcat.
CLEAR i_fldcat.
i_fldcat-fieldname = 'BLART'.
i_fldcat-tabname = 'GT_VBKPF'.
i_fldcat-key = 'X'.
i_fldcat-scrtext_l = 'Type'.
i_fldcat-outputlen = '6'.
APPEND i_fldcat TO i_fieldcat.
CLEAR i_fldcat.
i_fldcat-fieldname = 'BLDAT'.
i_fldcat-tabname = 'GT_VBKPF'.
i_fldcat-key = 'X'.
i_fldcat-scrtext_l = 'Doc Date'.
i_fldcat-outputlen = '12'.
APPEND i_fldcat TO i_fieldcat.
CLEAR i_fldcat.
i_fldcat-fieldname = 'BUDAT'.
i_fldcat-tabname = 'GT_VBKPF'.
i_fldcat-key = 'X'.
i_fldcat-scrtext_l = 'Park Date'.
i_fldcat-outputlen = '12'.
APPEND i_fldcat TO i_fieldcat.
CLEAR i_fldcat.
i_fldcat-fieldname = 'BKTXT'.
i_fldcat-tabname = 'GT_VBKPF'.
i_fldcat-key = 'X'.
i_fldcat-scrtext_l = 'Document Header Text'.
i_fldcat-outputlen = '25'.
APPEND i_fldcat TO i_fieldcat.
CLEAR i_fldcat.
i_fldcat-fieldname = 'WAERS'.
i_fldcat-tabname = 'GT_VBKPF'.
i_fldcat-key = 'X'.
i_fldcat-scrtext_l = 'Curr'.
i_fldcat-outputlen = '7'.
APPEND i_fldcat TO i_fieldcat.
CLEAR i_fldcat.
i_fldcat-fieldname = 'USNAM'.
i_fldcat-tabname = 'GT_VBKPF'.
i_fldcat-key = 'X'.
i_fldcat-scrtext_l = 'Parked By'.
i_fldcat-outputlen = '13'.
APPEND i_fldcat TO i_fieldcat.
CLEAR i_fldcat.
i_fldcat-fieldname = 'XBLNR'.
i_fldcat-tabname = 'GT_VBKPF'.
i_fldcat-key = 'X'.
i_fldcat-scrtext_l = 'Reference Text'.
i_fldcat-outputlen = '19'.
APPEND i_fldcat TO i_fieldcat.
IF ad_doc = 'X' OR all_doc = 'X'.
CLEAR i_fldcat.
i_fldcat-fieldname = 'REV_CODE'.
i_fldcat-tabname = 'GT_VBKPF'.
i_fldcat-key = 'X'.
i_fldcat-scrtext_l = 'RC'.
i_fldcat-outputlen = '2'.
APPEND i_fldcat TO i_fieldcat.
CLEAR i_fldcat.
i_fldcat-fieldname = 'REV_RSN'.
i_fldcat-tabname = 'GT_VBKPF'.
i_fldcat-key = 'X'.
i_fldcat-scrtext_l = 'Rev Reason'.
i_fldcat-outputlen = '15'.
APPEND i_fldcat TO i_fieldcat.
CLEAR i_fldcat.
i_fldcat-fieldname = 'REV_DATE'.
i_fldcat-tabname = 'GT_VBKPF'.
i_fldcat-key = 'X'.
i_fldcat-scrtext_l = 'Rev Date'.
i_fldcat-outputlen = '10'.
APPEND i_fldcat TO i_fieldcat.
ENDIF.
ENDFORM. " fieldcat_init
*& Module PAI_100 INPUT
MODULE pai_100 INPUT.
CASE ok_code.
WHEN 'BACK'.
IF sy-dynnr = '1000'.
PERFORM exit_program.
ELSEIF sy-dynnr = '0100'.
LEAVE TO TRANSACTION 'ZPPD'.
ENDIF.
WHEN 'EXIT'.
IF sy-dynnr = '1000'.
PERFORM exit_program.
ELSEIF sy-dynnr = '0100'.
LEAVE TO TRANSACTION 'ZPPD'.
ENDIF.
WHEN '%EX'.
IF sy-dynnr = '1000'.
PERFORM exit_program.
ELSEIF sy-dynnr = '0100'.
LEAVE TO TRANSACTION 'ZPPD'.
ENDIF.
WHEN 'BINP'.
DATA : ws_x TYPE c VALUE 'X'.
CALL FUNCTION 'POPUP_TO_CONFIRM'
EXPORTING
titlebar = 'Posting Documents Via Batch Input'
text_question =
'Are you sure you want to post all the selected documents?'
text_button_1 = 'Yes'
text_button_2 = 'No'
start_column = 25
start_row = 6
IMPORTING
answer = ans.
IF ans = '1'.
CALL METHOD grid1->check_changed_data
IMPORTING
e_valid = ws_x.
xbinp = 'X'.
PERFORM tbkpf_fuellen.
IF records = 'X'.
MESSAGE s999(zv) WITH text-007.
ELSE.
PERFORM beleg_pickup.
ENDIF.
ENDIF.
WHEN 'MALL'.
PERFORM mall.
WHEN 'EMAL'.
PERFORM emal.
WHEN 'RW'.
IF sy-dynnr = '1000'.
PERFORM exit_program.
ELSEIF sy-dynnr = '0100'.
LEAVE TO TRANSACTION 'ZPPD'.
ENDIF.
WHEN 'BUCH'.
CALL FUNCTION 'POPUP_TO_CONFIRM'
EXPORTING
titlebar = 'Posting Document'
text_question =
'Are you sure you want to post all documents selected?'
text_button_1 = 'Yes'
text_button_2 = 'No'
start_column = 25
start_row = 6
IMPORTING
answer = ans.
IF ans = '1'.
CALL METHOD grid1->check_changed_data
IMPORTING
e_valid = ws_x.
perform tbkpf_fuellen.
IF records = 'X'.
MESSAGE s999(zv) WITH text-007.
ELSE.
PERFORM beleg_pickup.
ENDIF.
ENDIF.
WHEN 'PICK'.
DATA : check TYPE n,
no_rec TYPE c.
check = 0.
no_rec = 'X'.
CALL METHOD grid1->check_changed_data
IMPORTING
e_valid = ws_x.
index = 0.
LOOP AT gt_vbkpf.
funcl = 'D'.
index = index + 1.
IF gt_vbkpf-xpick = 'X'.
check = 1.
CLEAR no_rec.
READ TABLE gt_vbkpf1 INDEX index INTO vbkpf.
PERFORM beleg_pickup.
ENDIF.
ENDLOOP.
IF check = 0.
CALL METHOD grid1->get_selected_rows
IMPORTING
et_index_rows = ws_row_idx.
IF NOT ws_row_idx IS INITIAL.
CLEAR no_rec.
ENDIF.
LOOP AT ws_row_idx INTO i_ws_row_idx.
READ TABLE gt_vbkpf1 INDEX i_ws_row_idx-index INTO vbkpf.
PERFORM beleg_pickup.
ENDLOOP.
IF no_rec = 'X'.
MESSAGE s999(zv) WITH text-007.
ENDIF.
ENDIF.
WHEN '&RNT_PREV'.
CALL METHOD grid1->set_function_code
CHANGING c_ucomm = ok_code.
WHEN '&RNT'.
CALL METHOD grid1->set_function_code
CHANGING c_ucomm = ok_code.
WHEN '%SC'.
CALL METHOD grid1->set_function_code
CHANGING c_ucomm = ok_code.
WHEN '&OL0'.
CALL METHOD grid1->set_function_code
CHANGING c_ucomm = ok_code.
WHEN '&OAD'.
CALL METHOD grid1->set_function_code
CHANGING c_ucomm = ok_code.
WHEN '&AVE'.
CALL METHOD grid1->set_function_code
CHANGING c_ucomm = ok_code.
WHEN '&AQW'.
CALL METHOD grid1->set_function_code
CHANGING c_ucomm = ok_code.
WHEN '&XXL'.
CALL METHOD grid1->set_function_code
CHANGING c_ucomm = ok_code.
WHEN '%PC'.
CALL METHOD grid1->set_function_code
CHANGING c_ucomm = ok_code.
WHEN '&CRTEMPL'.
CALL METHOD grid1->set_function_code
CHANGING c_ucomm = ok_code.
WHEN OTHERS.
do nothing.
ENDCASE.
CLEAR ok_code.
ENDMODULE. " PAI_100 INPUT
*& Form exit_program
Exits from the program after freeing the grid and container *
FORM exit_program.
IF NOT grid_container IS INITIAL.
CALL METHOD grid_container->free.
ENDIF.
IF NOT grid1 IS INITIAL.
CALL METHOD grid1->free
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
OTHERS = 3.
ENDIF.
LEAVE PROGRAM.
ENDFORM. " exit_program
*& Form f2200_handle_data_changed
To handle event of change in data in ALV.
-->P_ER_DATA_CHANGED text
FORM f2200_handle_data_changed USING ir_data_changed
TYPE REF TO
cl_alv_changed_data_protocol.
DATA : ls_mod_cell TYPE lvc_s_modi ,
lv_value TYPE lvc_value,
lflg_check TYPE i.
DATA : wa_vbkpf LIKE LINE OF gt_vbkpf.
SORT ir_data_changed->mt_mod_cells BY row_id .
LOOP AT ir_data_changed->mt_mod_cells
INTO ls_mod_cell
WHERE fieldname = 'I_PICK'.
IF NOT ls_mod_cell-value IS INITIAL .
CALL METHOD ir_data_changed->modify_cell
EXPORTING
i_row_id = ls_mod_cell-row_id
i_fieldname = ls_mod_cell-fieldname
i_value = ls_mod_cell-value.
READ TABLE gt_vbkpf INTO wa_vbkpf
INDEX ls_mod_cell-row_id.
IF ls_mod_cell-fieldname = 'I_PICK'.
wa_vbkpf-xpick = ls_mod_cell-value.
ENDIF.
MODIFY gt_vbkpf FROM wa_vbkpf
INDEX ls_mod_cell-row_id.
ENDIF .
ENDLOOP .
ENDFORM. " f2200_handle_data_changed
*& Form f2201_handle_hotspot
To handle event of clicking on hyperlink
-->P_E_COLUMN_ID text
FORM f2201_handle_hotspot USING p_e_column_id p_e_row_id.
READ TABLE gt_vbkpf1 INDEX p_e_row_id INTO vbkpf.
funcl = 'D'.
PERFORM beleg_pickup.
PERFORM exit_program.
ENDFORM. " f2201_handle_hotspot
Regards,
Susmitha
Dont forget to reward points for useful answers -
SOS Capture issue selects webcam not camcorder mac
Sorry to beat a dead horse if this has been posted already but I ran into an issue while capturing some videos. I currently am trying to use two cameras to capture some videos, GL2 and XH-A1, while connecting to Premier however the webcam is selected as the capture source and will only record that image not the camcorder. I have a firewire hooked up and when I operate the controls for the camera at the bottom it plays the camcorder but it still captures the webcam image not the camcorder. Any help would be greatly appreciated.
OK so thanks to the guys above the posted there replies but I finally figured out what the deal was with the capture select issue. Like most video editing software you can change the source that you are capturing from. The problem that was really strange though was that I could still operate the camera through the fire wire (rewind, fast-forward pause, ect.) but the image that it would capture was from the webcam not the camcorder.
After messing with it for a while I found a solution. For those that have a Mac and are running into this problem here is how to go about selecting the correct source for capture. Apparently by default the webcam will automatically start up when you select the capture option.
When you select the capture option you will be presented with this screen start by selecting this video button.
Next you will see this screen select the source button on top.
Next you will need to select your DV Video. Currently in this screen I do not have my camera hooked up so the option is greyed out and not selectable. However when hooked up it will turn black like the Built-in iSight option.
As previously stated by default the iSight camera is selected which is why I kept capturing the webcam and not my camcorder.
Well I hope this helps out to anyone else who has a macbook.
The only issue I have with this is why do they put the option to switch sources in such an obscure place? Other editing programs I've worked with have a button right below or to the side of the play and record buttons that say source. Adobe I love you but could you make CS5 a little bit easier and user friendly? -
Device online, but cannot control camera from Capture screen
I have a the camcorder listed below connected to my computer through a firewire card (also listed below), and I'm trying to capture video from tape with Premiere Pro CS4. The camera is online, and if I use the controls on the camera player to play the tape, the video shows in the capture preview, but I cannot control the camera from the capture screen.
Device Control is set to DV/HDV, and set device to Samsung.
Any idea what's going on here?
Operating System: Windows XP Professional
Sound card / driver version: SoundMax Integrated Digital Audio driver:5.12.1.5246
Video capture card / driver: Texas instruments OHCI compliant IEEE 1394 firewire card, driver:5.1.2535.0
Camcorder: Samsung SC-D363 miniDV, driver:5.1.2600.0
- Amanda, Carolina Tiger RescueYes, the record button is live, just the controls to control the tape deck in the camera are greyed out.
I have since borrowed a Sony DCR-HC42 to capture from, and the controls are working for it. However, it will not capture by setting In Points and Out Points, I just have to position the tape as best as possible, record and select when to stop the recording stop from the Preview. It's not ideal, but it's getting the job done.
This sort of problem seems to be par for the course when using Premiere on a pc. Users just have to plan on a few days to resolve compatability issues that should not have existed.
so for the moment, no critical issues, but once this project is done I will need to revisit the problem.
thanks for the help! Amanda -
Cant Capture Screen Recordings with QuickTime Player for making App Previews
cant Capture Screen Recordings with QuickTime Player for making App Previews
went into that page:
https://developer.apple.com/app-store/app-previews/imovie/Creating-App-Previews- with-iMovie.pdf
upgraded to quick time 7 pro
got stuck here:
" 4. In the window that appears, select your iOS device as the Camera and Microphone input source".
the window appeared, no selection is possibleThe instructions in the Developer page you link contemplates that you are using the QTX version instead of QT7 Pro:
vs.
QT7 Pro does not allow selection of iOS devices as the Camera and Microphone input source.
QTX is the QT version included with Mac OS X v10.6 Snow Leopard and later. However, as explained in the Developer page you linked above, if your Mac is not already using it, you need to upgrade to the current (OS X 10.10 Yosemite) OS X Version to use iOS devices as the recording sources in QTX.
Message was edited by: EZ Jim
Mac OSX 10.10.2 -
Unable to capture screen fields in eCATT
Problem description 1 : Unable to capture screen fields in eCATT
Recording using SAP GUI Method.
Problem description 2 :Unable to capture Tab controls while recording
in eCATT using SAP GUI Method.
Thaks for any suggestion you could provide me and once again for your courtesy attention.
Regards,
Eric MonteiroHi Phani,
Please try below code:
*data declaration for reading values given by user in the selection screen field.
DATA: BEGIN OF i_tab OCCURS 0.
INCLUDE STRUCTURE rsselread.
DATA: END OF i_tab.
MOVE: 'LOGSYS' TO i_tab-name,
'P' TO i_tab-kind. u201CP For parameter
APPEND i_tab.
MOVE: 'GP_SIMVE' TO i_tab-name,
'P' TO i_tab-kind. u201CCheck if field is Parameter
APPEND i_tab.
*move program name and screen number into local variable.
l_prog = sy-repid. u201C(Try by directly passing program name also)
l_dynnr = sy-dynnr. u201C(Try by directly passing Screen number also)
*calling function module to get the value given by user.
CALL FUNCTION 'RS_SELECTIONSCREEN_READ'
EXPORTING
program = l_prog
dynnr = l_dynnr
TABLES
fieldvalues = i_tab.
Hope this should slove your issue.
Thanks & Regards,
Gaurav. -
IMovie 6 HD - TV Screen Images are blurred
How do I created iMovie DVD that plays clear images and text?
I do not want to keep wasting DVDs experimenting for clear result.
I created iMovie per instructions from another post:
imported screenshots of website using KenBurns effect;
set the effect to 1.0 to stop zooming, and did not allow iMovie to render movie when exporting.
Discussion indicated that blurred image in iMovie would be clear on TV screen.
Imported snapshots were crystal clear in Preview and Photoshop.
Imported iMovie to iDVD and burned DVD.
DVD plays blurred images and text.Are you saying I should size any still images at 768x576 pix before importing them into iMovie since that is TV resolution?
If you are using PAL, yes. For NTSC, the resolution is 640x480 pixels.
Does it matter what dpi the images are?
No, the dpi is of NO concern in video.
If snapshot captures screen images at 72dpi,
does it help to increase dpi of image in Photoshop?
No.
or is that only interpolating dpi since capture was at 72dpi?
Yes. -
I installed Yosemite and now my computer is slow when logging in. Also when I type my password, a bar appears measuring the process and then all of a sudden the screen images are distorted. After that my home screen appears and everything seems normal. What can I do to fix this?
Here is what the etrecheck results are:
Problem description:
slow at start up, screen is distorted while logging in, it is fine after
EtreCheck version: 2.1.8 (121)
Report generated April 5, 2015 at 9:42:01 AM PDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Pro (13-inch, Early 2011) (Technical Specifications)
MacBook Pro - model: MacBookPro8,1
1 2.3 GHz Intel Core i5 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 297
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.2 (14C109) - Time since boot: 0:7:0
Disk Information: ℹ️
Hitachi HTS545032B9A302 disk0 : (320.07 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 318.84 GB (174.85 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 319.21 GB Online
MATSHITADVD-R UJ-898
USB Information: ℹ️
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. FaceTime HD Camera (Built-in)
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[not loaded] com.devguru.driver.SamsungComposite (1.1.0) [Click for support]
[not loaded] com.logmein.driver.LogMeInSoundDriver (1.0.3 - SDK 10.5) [Click for support]
/System/Library/Extensions/ssuddrv.kext/Contents/PlugIns
[not loaded] com.devguru.driver.SamsungACMControl (1.1.0) [Click for support]
[not loaded] com.devguru.driver.SamsungACMData (1.1.0) [Click for support]
Startup Items: ℹ️
HP Trap Monitor: Path: /Library/StartupItems/HP Trap Monitor
Startup items are obsolete in OS X Yosemite
Problem System Launch Daemons: ℹ️
[failed] com.apple.ucupdate.plist
[failed] com.apple.watchdogd.plist [Click for details]
Launch Agents: ℹ️
[not loaded] com.google.keystone.agent.plist [Click for support]
[not loaded] com.hp.help.tocgenerator.plist [Click for support]
[not loaded] com.logmein.LMILaunchAgentFixer.plist [Click for support]
[not loaded] com.logmein.logmeingui.plist [Click for support]
[not loaded] com.logmein.logmeinguiagent.plist [Click for support]
[not loaded] com.logmein.logmeinguiagentatlogin.plist [Click for support]
Launch Daemons: ℹ️
[not loaded] com.adobe.fpsaud.plist [Click for support]
[not loaded] com.google.keystone.daemon.plist [Click for support]
[not loaded] com.logmein.logmeinblanker.plist [Click for support]
[not loaded] com.logmein.logmeinserver.plist [Click for support]
[not loaded] com.logmein.raupdate.plist [Click for support]
[not loaded] com.microsoft.office.licensing.helper.plist [Click for support]
User Launch Agents: ℹ️
[not loaded] com.adobe.ARM.[...].plist [Click for support]
[not loaded] com.facebook.videochat.[redacted].plist [Click for support]
[not loaded] com.google.GoogleContactSyncAgent.plist [Click for support]
User Login Items: ℹ️
iTunesHelper UNKNOWN Hidden (missing value)
AdobeResourceSynchronizer Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
Android File Transfer Agent Application (/Users/[redacted]/Library/Application Support/Google/Android File Transfer/Android File Transfer Agent.app)
HP Product Research Application (/Library/Application Support/Hewlett-Packard/Customer Participation/HP Product Research.app)
HPEventHandler Application (/Library/Printers/hp/hpio/HPEventHandler.app)
Internet Plug-ins: ℹ️
o1dbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
LogMeInSafari64: Version: 1.0.660 [Click for support]
Default Browser: Version: 600 - SDK 10.10
Silverlight: Version: 5.1.10411.0 - SDK 10.6 [Click for support]
FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
LogMeIn: Version: 1.0.660 [Click for support]
Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
LogMeInSafari32: Version: 1.0.660 [Click for support]
QuickTime Plugin: Version: 7.7.3
googletalkbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
AdobePDFViewer: Version: 10.0.1 [Click for support]
SharePointBrowserPlugin: Version: 14.1.0 [Click for support]
iPhotoPhotocast: Version: 7.0 - SDK 10.7
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
7% ocspd
4% WindowServer
1% kextd
0% ps
0% securityd
Top Processes by Memory: ℹ️
137 MB Microsoft Word
120 MB Safari
86 MB ocspd
82 MB CalendarAgent
77 MB WindowServer
Virtual Memory Information: ℹ️
310 MB Free RAM
1.89 GB Active RAM
1.55 GB Inactive RAM
544 MB Wired RAM
1.13 GB Page-ins
8 KB Page-outs
Diagnostics Information: ℹ️
Apr 5, 2015, 09:32:47 AM Self test - passed
Apr 5, 2015, 09:30:05 AM /Users/[redacted]/Library/Logs/DiagnosticReports/AdobeResourceSynchronizer_2015 -04-05-093005_[redacted].crash
Apr 4, 2015, 01:12:41 PM /Users/[redacted]/Library/Logs/DiagnosticReports/AdobeResourceSynchronizer_2015 -04-04-131241_[redacted].crash
Apr 4, 2015, 08:13:57 AM /Users/[redacted]/Library/Logs/DiagnosticReports/AdobeResourceSynchronizer_2015 -04-04-081357_[redacted].crashReinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
Updated iPad 2 last night. All movies (9) on my iPad can no longer be viewed. The movie plays but the photos and scene selection are blank. How do I fix this
Quit the app and restart the iPad.
In order to quit or close apps - Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Try the videos app again.
Maybe you are looking for
-
Itunes 10.5 on win 7 64bit, AppleMobileDeviceHelper has stopped working.
itunes 10.5 on win 7 64bit, AppleMobileDeviceHelper has stopped working.
-
My 8600 printer (fairly new) will not print: Displays "out of paper". It is NOT out of paper.
I have followed all instructions on the 8600 printer on internet. What do I do to get it printing again. Just displays "out of paper." I have removed the paper, fanned it, jogged it, etc., but no go.
-
Hi all, I have a short little applescript that does some math and then outputs a mix of the results and plain text in tabular form, and copies it into a Word document. (I'm a complete novice at AS, this is maybe my third script). At present, the scri
-
My MacBook Pro running extremely slow. What to do?
Details: Version 10.9 Processor 2.4 Ghz Intel Corei5 Memory 4 GB 1333 MHz DDR3 Software OS X 10.9 (13A603)
-
How to get a copy of stagecraft (flash lite 3.1) source distribution
Hi everyone, I am a PhD student doing embedded system development. As the flash lite for digital home is pretty attractive to me, I am wondering how to get a copy of stagecraft (flash lite 3.1) source distribution. I cannot find download link anywher