Carrying forward the parked documents of previous fiscal year

Hi Experts,
My requirement is to carry-forward the parked documents of the previous fiscal year to the new fiscal year automatically with a background job that should run at the end of each fiscal year.
This job should check all the documents that are still parked and must carry them to the next fiscal year. As per standard SAP, the document should be manually posted with posting date of the new fiscal year. Then the system will create a new Document in the new fiscal year, deleting the old document. I need to automate this process.
For posting a document we use a Customized Workflow (Z copy of FIPP).
My question is, how can I go about this requirement? What all needs to be done if I want to trigger the workflow in the background on a particular day?
Thanks!

Sheryl,
If you really want to "remove/cancel" the parked documents, then your solution is to delete them as Prashant previously suggested.  Transaction FBV0 allows you to post or delete a parked document.  Deleting the parked documents does not remove the entire document from the system.  It will remove any line item information, but it will leave the header information.  With the header information, you will still have record of the document numbers for audit purposes.  The status on the header will show "parked document which was deleted".  Deletion is the standard SAP solution to "remove/cancel" parked documents - the only alternative to deleting a parked document is to post it.
Park a document on your test system then delete it so you can see the results.  You will still be able to pull up the header information in FB03.
I am not aware of any standard SAP reports for listing parked documents that were deleted.  However, if you require such a report, you could create a simple SQ01 query against table BKPF.  You would want to include the Document status field (BSTAT) in the query selection criteria so you can select documents with a status of 'Z' - parked document which was deleted.
Regards,
Shannon

Similar Messages

  • How to carry forward the payment budget to next fiscal year

    How to carry forward the payment budget to next fiscal year. Please provide us the Tcode for indivisual and for mass activity also.
    Thanks,
    Vivek Gupta

    Done

  • GL balance carry forward special period 13 to new fiscal year and Rec acct

    Hi,
    would like to seek for your advice as below question/problem.
    a) User now is doing the year end closing. Normally the closing is up to the period 12 and for the purpose of track the adjustments made by the management and auditors user post to period 13 2008 from the pervious financial year. Our concern is when perform the GL Balance carry forward to new fiscal year which is 2009 does the system carry forward the GL adjustment figure from period 13 to the new fiscal year on top of that when we perform the GL balance carry forward to new fiscal year 2009 and later on find out there is an audit adjustment that need to done and user post in the period 13 fiscal year 2008 can the adjustment auto post to the new fiscal year?
    b) Can we change the Rec account in the vendor master as currently user need to change the vendor from difference Rec account which from joint venture to subsidiary account code? If involve the SPRO configuration how where should we configure? After we change the configuration does all the posting from one Rec account subsidiary will auto post to another Rec account Joint venture?
    Kindly advice.

    Hi,
    Thank you for the prompt reply.
    a)could you provide the path/T-code to view the  vendor master activity screen layout configuration field status for reconciliation account should be Optional.
    b)Beside,what the impact of change the reconciliation account from one to another? It is neccesary/must to do the balance sheet adjustment for change the reconcilation account?
    Can we post the balance through the manual JV (F.02)with the document type is ZD(Debit Note) to post the balance of old reconciliation account to the clearing account and then change of the reconciliation account to the new account then reverse the posting of the JV? By doing so what is the impact in the system? In this scenarion do we need to do the balance sheet adjustment?
    c) You mention balances from the old recon will not be posted to the new reconcilation account unless I do a balance sheet adjustment it is mean after I run the balance sheet adjustment the balance from the old reconcilation account will auto post to the new reconcilation? What other impact will effect the system?
    d) If the company never run the balance sheet adjustment before and due to the scenerion mention above they run the balance sheet adjustment for the first time what are the impact in the system for the company that only have one business area and also for the company which have more than one business area?
    e) What are the prerequisite step/configuation/setting need to be setup in order to run the balance sheet adjustment as the company perviously never run the balance sheet adjustment before? Kindly provide reference/document/guide.
    e) Change of reconcilation account does it related/impact to the account group of vendor master?
    Please help.

  • Carry forward of residual budget to next fiscal year

    Hi all,
    We are trying to implement Funds Management.  As part of year end closing, we need to carry forward residual budget of a particular budget type which i have created by using program FMMPCOVR.  However, the standard SAP residual key figure does not seem to be providing the correct figures to carry forward.  It throws out all budget types, and all entered budgets, not taking into account the consumed budgets as well.  I have thus created a new key figure which is simliar to the standard key figure, but change the budget type under the "budgeting data" tab to restrict to only the budget type I'm interested in.  It is still not working though, results are the same.  I'm not sure if I have created the key figure correctly.  Can someone please advise?
    Simlilarly, I have also tried to restrict the Funds to carry forward by only selecting a particular fund type by indicating in the "Restriction of FM Account Assignments" on the selection screen of FMMPCOVR.  The filter doesn't seem to be working either.  It throws out all funds of all fund types.  Can someone please adivise on this too? 
    Regards,
    maz

    Thanks Farhad...
    May I ask how did you manage to do some validation in the budget workbench?  Is there any user exit/badi that we can implement?  We wanted to do some validation on the Fund and Fund Center values which users will enter, to prevent them from entering the wrong combination.  In our business requirements, for every Fund entered in the budget workbench, users can only enter a particular group/range of Fund Centers.  Currently, the system allows free entry of any Fund and Fund Center combination.
    We are using Funds Management ECC 6.00.
    Regards,
    maz

  • Capturing previous year invoice document in current fiscal year

    Dear All,
    One of my client requirement is that have posted invoice in previous year and they are making payment in current fiscal year, this scenario they want to capture in payment advice. When am checking all the table with the input as payment document number and fcleared fiscal year system not showing the invoice reference against which it is cleard. For current year cleared documents we can extract the invoice reference where as for previous year system not picking that invoice number.
    Have checked in all the table entries, kindly suggest me is there any other alternative way to do this...
    Regards,
    Balaji.c

    Dear All,
    The problem is resolved since by giving the input as previous fiscal year and then system able to show the invoice number even if its cleared in current year. Invoice belongs to preious year and cleared documen in current year in that case we have to give the input parameter as previous fiscal year against that document number.
    Thanks for all the inputs.
    Regards,
    Balaji.c

  • Carry forward the PR/PO doc in new fiscal year?

    hi dear all,
    How to carry forward the PR/PO doc in new fiscal year?
    upesh

    Hi,
    This error comes from FI side. For the Account assigned PRs, POs should be carry forwarded in new budget
    Refer this error to your FI guys, they'll make relevant settings
    Umakanth

  • Carry forwarding the closing  balance as opening balance

    hi,
    i need  to carry forward the closing balance of the 1 month to the opening balance of the next month. how to do this in the query.?

    Hi Enthu,
    I think, you could use data function of a formula.
    You will have to create a RKF for closing balance of previous month.
    Try the SUMCT<Closing balance of prev per> in the opening balance column of this month.
    You can check the link below for further information
    http://help.sap.com/saphelp_nw70/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
    However, determining all opening balances by carrying forward closing balances in the query, I think, is not a good idea, since this would mean that you have to run the query from the timepoint the data was first reported. This means querying and reporting a lot of data. I would rather suggest you to have another Cube may be over this DSO and do the carry forward in modeling.
    Hope it helps,
    Best regards,
    Sunmit.

  • Previous fiscal year's  document Gap

    Hi Experts:
    My customer encountered the following issue:
    There is FI document Gap in the previous fiscal year. The end user entered a FI document through transaction FB05, and after saving noted down the document number. But after that, when they try to check this document, it can not be found by the system, nor does it exist in BKPF, BKPF shows that this one document number was skipped. Unfortunately, this issue was not solved timely. We doubt that this gap is caused by update error, since the customer has not done any customer enhancement in this document posting process. However, this issue happened last year so that the update log does not exist anymore.
    Now the customer's auditing team is asking for evidence which can prove that this gap is caused by system. How could this be achieved?
    Thank you so much!

    Hi Yucen,
    Please check the below OSS note( Knowledge base article)
    1828201 - Missing document numbers for accounting documents ( This note it self SAP is given  reasons for the missing documents also mentioned concerns of auditors)
    RFVBER00 ( Report to show update termination , fail documents by system)
    Regards,
    Chandra sekhar

  • Error while posting the parked document in ECC 6.0

    Hello ABAPers,
    After upgrade from R/3 4.6c to ECC 6.0, when we try to post the parked documents ,It calls FM :POSTING_INTERFACE_DOCUMENT".
    Inside it a call transaction is done using FBVB which throws error while posting for more than 4 withholding tax types.
    Error : Field WITH_DIALG-WT_BASE(5) does not exist in the screen SAPLFWTD 0100.
    On running BDC in foreground mode ,Error is happening when the withholding dialog opens and screen seems to be small to input all the tax codes i.e it shows only 4-5 rows and hence only 4 tax types passes to the screen and remaining is left out and error is thrown. This results in document not getting posted.
    But in 4.6 c a bigger screen pops up and no error is thrwon.
    We are not able to check FBVB directly, since it does'nt allow Direct call to this transaction.
    We have checked lots of thread and notes ,But nothing seems to be relevant or helpful in our case.
    Could you please help us in resolving this issue/ let us know if any configuration/ screen variant change is required?
    Thanks!
    Regards,
    M M Jaffer.

    Hello Nabheet ,
    It is a standard code. We are calling the FM  'PRELIMINIARY_POSTING_POST_ALL'  for posting the parked document. The FM calls internally another FM 'POSTING_INTERFACE_DOCUMENT'. This calls the transaction FBVB where we get the above error.
    Thanks.

  • Error messege BP603 while posting the parked document budget exceeded

    Hi ,
    We are having the budget function and its for overall release.
    Budget has been relased and assigned value is less then the released budget in all conditions.
    Its throwing the error messege No BP603  while posting the parked documents. Unable to understand the reason why its behaving.
    Please let me know if anybody has faced such problem.
    We are into ECC6, EHP 4 and the SAP note 557431 is not going to help anyways.
    Regards
    N.Raju

    Hi,
    Please follow as given below:
    1. Use T.Code KO31 and enter order and deactivate the control
    2. Then try to post the parked document
    3. And use T.Code KO30 and enter the order to activate the control
    Some times system will check budget availability which already commited for parked documents.
    Hope it will work.
    Chandu

  • Reg:how to post the parked documents using BDC

    Duplicate message in General deleted.  Please do not post the same question in more than one forum.
    Hi
    I am creating parked Documents using FV50. I am able to check them using FBV0, I am able to select and post the documents using the same transaction. Its working fine. However I want to post the selected parked documents using BDC. I am having problems as the output in FBV0 is in ALV report format. HAving problems selcting the parked documents to be posted. As there any way to post the selected parked documents using BDC.
    Please suggest me a solution for this.
    Thanks,
    Satish
    Edited by: Matt on Dec 3, 2008 7:40 PM

    Hi Rob,
    Thank you for ur reply, can u send that code how u post the parked documents using BDC for FBV0 transaction.  Please send the code.
    Thanks,
    Satish

  • Bapi or FM for posting the parked document

    Hi All,
    Can someone suggest for FM or Bapi for posting the parked document??
    Regards,
    Shobana.K

    try this...
    BAPI_ACC_DOCUMENT_POST
    BAPI_ACC_INVOICE_RECEIPT_POST
    BAPI_INCOMINGINVOICE_PARK 
    BAPI_INCOMINGINVOICE_CREATE
    MRM_PARKED_INVOICE_POST

  • Post the Park Document

    Hi,
    When we post the park document, the following error Message showing.
    No Batch Input data for Screen SAPMF05A 0302
    What is the problem and how to solve this?
    Thanks in advance

    Hello,
    Refer SAP Note 1226243 - Parking the fields BSEG-VERTT, BSEG-VERTN, BSEG-VBEWA
    Regards,
    Ravi

  • Depreciation of the Previous Fiscal Year want to post in Current FiscalYear

    I have already posted Depreciation for the year 2008 by using Planned Posting Run (T.code:AFAB)
    After that I have created one Asset Master (T.code: AS01)
    In AS01, Depreciation tab , I have set Depreciation starts from 19.09.2007, i.e. Fiscal year: 2007
    I have capitalised this asset as on 31.03.2008, i.e. Fiscal Year :2008
    Now I want to post Depreciation for the period  19.09.2007 to 31.03.2009 (560 Days) on 31.03.2009.
    When I am running AFAB  (Repeat Run) Fiscal year: 2008 & Period: 12  with this Specific Asset No, then system is calculating Depreciation only for 1 day, i.e. 31.03.2009
      As the Fiscal year:2007 has been closed for Asset module, hence I have opened Fiscal year: 2007 in AA (T.code: OAAQ)
    But after opening the Fiscal year :2007 also, system is  calculating Dep only for one day.
    Please suggest me how will I solve this issue
    Thanks & Regards,
    Suvadip Mukherji

    >
    Amitava Bhattacharyya wrote:
    > Hi,
    >
    > Plz suggest whether the last period of the previous fiscal year can be opened in MM to allow backposting. If it's possible then how?
    >
    >
    >
    > Amitava
    Please check these answered links:
    MMPI
    Opening the Closed Periods using MMPI
    Edited by: Afshad Irani on Jun 15, 2010 3:45 PM

  • Assigning user for release of the park document.

    Hi Friends,
    I want to know how we can assign a user for releasing the park document?
    Or simply tell the process for release of park document (G/L)
    Thanks.
    Milind

    Hi,
    You can set some responsibility role inside the rule depends the criteria you want to set. Give that rule where is the step for PARK document.
    Regards
    Dev

Maybe you are looking for

  • Lion 10.7.4 caused major QT problems

    We updated two systems to 10.7.4 over the weekend. Now, when we receive QT files via email that were converted using Apple Compressor, we get a message within the mail message that reads "Missing Plug-in". Also, these files are not usable within Logi

  • Problem in accessing: Parentnode 0..n-- childnode 0..1-- subchild node0..1

    Hi, I have  a problem in accessing the node3a's current element. Following is the context structure (which I am getting from backend BAPI). Node1 is the parent node, it has 3 child nodes, and further Node2c has 3 child node. I need to access current

  • Operating temperature

    Does anyone know what's a decent temperature for my HD bay on my 24" iMac? My HD recently crashed (6 month old iMac) and I'm looking at my HD bay temp at it hovers around 106F. I've upped my fan speed but does anyone know if this is in the range of o

  • Daqmx separate multiple physical cahnnels apply equations and collect information

    Dear People! I am using a DAQCard 6023E with 16 channels. My purpose is to collect information from a gasifier to find temperature and pressures from 7 of the channels and 4 channels respectively. Forget about the pressure to make the problem more ea

  • Third Party destination in BI7

    Hi, I am planning to send data from BW to external system which is a SQL server.  In open hub if we select third party destination and in SM 59 if we give the destination would it send data to external system. Thanks.