Cashback Advice - Helpful Service Now!!

Like many here I found the Cashback system problematic ,
However eventually I found the correct web-site but only after help from the very helpful Cashback service company, "OPIA" who have a help line on 0843 3179318.
The web-site to use for CASHBACK is:-
www.lenovo-offers.com
For those who took the Summer tablet offer there is a big splash, CLICK ON THAT, - and then on the next page at the top there is a "Make Claim" tab. Click there and off you go!!
If you have your purchase receipt with the date, receipt number and also our product serial number then the site is easy to use. The site does use a drop-down for date of purchase whihc limits ou to onl the "valid dates" in terms of the 30-60 day time window after purchase. IF outside these you need to talk to the OPIA people to get them to represnt our case to Lenova.. and just submit the claim using the earliest date on the Drop Down.
I ended up just outside the 60 day claim limit due to the problems I had 
a) Finding the right claim web-site.
b) Going down the right claim path.
However the firm servcing the claims contacted Lenovo with my appeal to have my claim considered and were back with the hour and AGREED TO HONOUR THE CLAIM,.. very helpful!!
From submitting claim to claim verification e-mail was just 2 hours.
The firm servicing this is NEW on the job, .. and is delivering a helpful and fast service.
So thank you Lebovo, and "OPIA" the Cashback marketing and claims company!
BUT , am still not too happy withth enforced 30 day wait, then the 60 day cut-off.. why not enable the claim at point of sale??
(Well OPIA is honest about why this is employed .. on their web-site the attraction of Cashbank instead of discount for suppliers is clearly admitted .. ".. with Cashback .... , it will cost you a fraction of a traditional price discount and will typically result in a far greater uplift.". Yes. put simply, not everyone remembers to claim,  and if they set an awkward claim time window (this one is from 30 days after purchase and no later than 60 days after) then they filter out a good number of claims.
Let us hope the Lenovo marketing team have enough savvy about social media and the current marketplace to allow those claimants who waken after day 61 to the fact they forgot their claim!
IF you are in that category, worth asking the nice folks at OPIA to get Lenovoto approve our late claim.
As for me I am a happy bunny, Lenovo actioned my claim! THANK YOU !!

Do you reboot the Openreach modem very often? Doing this can reduce your IP profile...
If you found this post helpful, please click on the star on the left
If not, I'll try again

Similar Messages

  • I was not given the option to purchase applecare + with iPhone 5.I tried calling Apple customer service, the automated process took my info but then came back and said too busy to help you now. How can I buy it now?

    I was not given the option to purchase applecare + with iPhone 5.I tried calling Apple customer service, the automated process took my info but then came back and said too busy to help you now. How can I buy it now?

    You should call Apple but you should get an email from Apple. I got one a few minutes ago and this is what they said about AppleCare+ :
    Thank you for your recent iPhone 5 purchase at the Apple Store.
    We would like to let you know that every iPhone comes with one year of hardware repair coverage through its limited warranty and up to 90 days of complimentary support. AppleCare+ for iPhone extends your coverage to two years from the original purchase date of your iPhone and adds up to two incidents of accidental damage coverage, each subject to a $49 service fee.
    We noticed you weren't given the opportunity to add AppleCare+ to your iPhone. If you would like to extend your coverage for only $99, please reply to this email by September 21st.
    After that date, if you would still like to purchase AppleCare+ within the first thirty days of receiving your iPhone, you can call AppleCare at 800-MY-IPHONE or visit an Apple Retail Store.
    Thank you for shopping with Apple.
    Sincerely,
    Apple Online Store Team

  • Extension manager & Dreamweaver run when I launch HP's help services

    The problem began when I loaded an After Effects preset, "Pie Chart" (downloaded from Adobe site)... 
    Now, when I click certain links in the Windows 7 Help system (as modified by HP), both Extension Manager and Dreamweaver open, and Dreamweaver generates the message, "The Extension Manager will now launch and finish updating Dreamweaver.  OK?"   Well, it's not okay, but my only choice is to click the OK button, which runs Extension Manager.  Then I exit both Dreamweaver and Extension Manager, which successfully closes both programs.  Then they re-launch a second time with the same message.  Again I close them both and this brings me to the help service I wanted in the first place.  Dreamweaver and Extension Manager always load twice.   
    I looked at the html code for the modified help screen, and the link in the help system runs a .JSE file. Windows shows the JSE file as a "JScript Encoded Script file" that is associated with Microsoft Windows Based Script Host.  I notice that there's a similar file extension, .JS, which is a "JScript Script file" (note: not encoded) and the .JS file is associated with Dreamweaver. 
    So... what's going on here?  Is this a problem with Extension Manager, DreamWeaver, After Effects, the Help system, registry or something else?  And how do I fix it?
    Details:  64-bit Windows 7 home version on a Hewlett-Packard HPE-500f.  Adobe Master Collection 5.0. 
    Thanks all!
    -Fred

    I submitted https://bugs.archlinux.org/task/37899 although you seem to have much more issues.

  • Can't find "Delegate Class Name" for JDBC Helper Service

    Hi,
    I downloaded WLServer 6.1 with sp1 and WLPortal 4.0, installed them on Solaris 7 using default DB cloudscape -- everything was fine. Now, I'm trying to configure database to Oracle 8.1.7.
    In "Configure the JDBC Helper Service" section of document "Configuring WebLogic Portal for Oracle Databases" (http://e-docs.bea.com/wlp/docs40/deploygd/oraclnew.htm), step 2 requires to enter value of "com.bea.p13n.util.jdbc.internal.OracleJDriverJdbcHelperDelegate" to "Delegate Class Name". But, I can't find this "Delegate Class Name" variable. The available varialbles on the Configuration tab on my screen are: Maximum Number of Retries, Maximum Wait Time (milliseconds), Use CLOBs for Read?, Use CLOBs for Write?. And the Configuration tab is the only available tag for JDBC Helper Service. Did I download a different version from other people? I downloaded it within 3 months.
    Can anyone help?
    Thanks in advance,
    Jane

    Thanks Steve.
    I had my own jndi.properties file that's why it was working with ejb bean I created in the AM and not with the sdo web service.
    I didn't know I had to add the jndi properties to the connection.xml maybe you can update the documentation.
    <?xml version = '1.0' encoding = 'UTF-8'?>
    <ns2:References xmlns:ns2="http://xmlns.oracle.com/adf/jndi">
    <Reference className="oracle.jbo.client.svc.Service"
    name="{/test/model/common/}DepartmentModuleService">
    <Factory className="oracle.jbo.client.svc.ServiceFactory"/>
    <RefAddresses>
    <StringRefAddr addrType="serviceInterfaceName">
    <Contents>test.model.common.serviceinterface.DepartmentModuleService</Contents>
    </StringRefAddr>
    <StringRefAddr addrType="serviceEndpointProvider">
    <Contents>ADFBC</Contents>
    </StringRefAddr>
    <StringRefAddr addrType="jndiName">
    <Contents>test.model.common.DepartmentModuleServiceBean</Contents>
    </StringRefAddr>
    <StringRefAddr addrType="serviceSchemaName">
    <Contents>DepartmentModuleService.xsd</Contents>
    </StringRefAddr>
    <StringRefAddr addrType="serviceSchemaLocation">
    <Contents>test/model/common/serviceinterface/</Contents>
    </StringRefAddr>
    <StringRefAddr addrType="jndiFactoryInitial">
    <Contents>oracle.j2ee.rmi.RMIInitialContextFactory</Contents>
    </StringRefAddr>
    <StringRefAddr addrType="jndiProviderURL">
    <Contents>ormi://localhost:23791/SvcInterfaceDeploy_MiddleTier</Contents>
    </StringRefAddr>
    <StringRefAddr addrType="jndiSecurityPrincipal">
    <Contents>fmwadmin</Contents>
    </StringRefAddr>
    <StringRefAddr addrType="jndiSecurityCredentials">
    <Contents>welcome</Contents>
    </StringRefAddr>
    <StringRefAddr addrType="serviceSchemaName">
    <Contents>HRAppService.xsd</Contents>
    </StringRefAddr>
    </RefAddresses>
    </Reference>
    </ns2:References>
    thanks edwin

  • My Bluetooth has disappeared and I have tried just about everything on the internet. When I click on Bluetooth file exchange it says hardware not found. I tried resetting everything as well nothing is working for me please help because now my facetim

    My Bluetooth has disappeared and I have tried just about everything on the internet. When I click on Bluetooth file exchange it says hardware not found. I tried resetting everything as well nothing is working for me please help because now my facetime doesn’t work neither does photo booth and now I cannot text people off my laptop unless they have iMessage.

    If you followed the instructions in the support article exactly (leaving the machine off for two minutes), then it has a hardware fault. Take it to an Apple Store or other authorized service provider for repair.

  • Service Now ODBC connection in Universe

    We're using "Service Now" product.
    We installed their propriety ODBC and able to connect in Universe Designer (BOXI3.1 SP5.3).
    We see table structure, but no data is retrieved.
    Crystal reports is working perfectly with this ODBC.
    We know it is not supported with BO product line, but really like to make this work...
    Did anyone used this ODBC before with Designer / WebI?
    Can SBO or PRM file change do the trick?

    Hi,
    well...i think you wont get any help here as this is, as already pointed out by you, not supported.
    I resume you use the generic ODBC Driver in the Designer? Maybe you want to try the generic JDBC Driver? If this "Service Now" Product has a JDBC Interface?!
    Regards
    -Seb.

  • SCCM Integration with SNOW (Service Now)

    Hello,
    I have implemented SCCM 2012 R2 for our client. Now I have to work with the Service Now(SNOW) team on SCCM integration with SNOW. I have no idea how this is done and what input/involvement is needed from my side. Can some one please let me know how is this
    done. Are there any scripts that I need to provide the SNOW team?
    Regards,
    JD

    Hi,
    Please refer to the link below:
    http://wiki.servicenow.com/index.php?title=Microsoft_SMS/SCCM_Integration_2.0
    Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Service now scrolling

    hi all,
    We use Service now as out IT Support tool, which is web based an uses frames and I want to use it from my iPad (3).
    Apparently  the two finger gesture to scroll down lists the frames doesn't work in this tool - at least it doesn't for me.
    Does anyone here have experience with service now? Any help is much appreciated.
    There's a demo site available at http://demo.service-now.com
    Thanks
    Andreas

    Hi Andreas,
    Thanks for posting.
    There are currently limitations using ServiceNow on iPad with Safari. The mobile view is supported but offers limited functionality. UI11 and the previous UI have scrolling and usability issues like you encountered.
    The good news is we're working on a much improved iPad solution that will address those limitations.
    I'm happy to share a preview. I'd also like to understand how you use ServiceNow in general and specifically what key behaviors are the top priorities for your iPad users.
    Reply to this or contact me offline (dan.turchin at service-now.com) and let me know when you're available.
    Thanks,
    -dan
    ServiceNow | Sr. Director Product Management | (650)533-0918

  • Windows Intune and Service now Integration

    Please help me  to get the feasibility of Windows Intune Integration with Service now Application Please share me the procedure or Documents

    Hi,
    I would like to confirm that do you mean that you want to integrate Windows Intune with Service Now, if this is the case, then I would like to suggest you post in the Window Intune and Service Now forum.
    Regards,
    Yan Li
    Regards, Yan Li

  • JDBC Helper Service

    Hello,
    The SQL Server DB Configuration in WLP Deployment Guide says JDBC Helper
    Service needs to be configured for each application deployed. Do I need to
    do this for other applications that has been installed and deployed
    out-of-box (p13nApp, p13nConsoleApp, paymentWSApp, taxWSApp, wlcsApp,
    wlpDocsApp)? I only did it for portal app so far and just got me wondered...
    Thank you,
    Makoto

    Makoto Suzuki wrote:
    Hi,
    So am I correct in thinking that the other apps are still using cloudscape
    database, although the connection pools and data sources now point to SQL
    Server after configuration is changed?I don't mean that. Those apps won't work. So, if you plan to use all the
    apps, make this change in all the apps.
    Subbu
    >
    Thank you,
    Makoto
    "Subbu Allamaraju" <subbuATBeaDOTCom> wrote in message
    news:3d08a832$[email protected]..
    Makoto,
    You need not, if you're not using those apps.
    Subbu
    Makoto Suzuki wrote:
    Hello,
    The SQL Server DB Configuration in WLP Deployment Guide says JDBC Helper
    Service needs to be configured for each application deployed. Do I need
    to
    do this for other applications that has been installed and deployed
    out-of-box (p13nApp, p13nConsoleApp, paymentWSApp, taxWSApp, wlcsApp,
    wlpDocsApp)? I only did it for portal app so far and just got mewondered...
    Thank you,
    Makoto

  • SCOM Service Now Integration

    Hi All,
    I am going to integrate SCOM with Service now application, Can you please help me on this . Please help me how to Integrate SCOM with Service now, Please share me the procedure or Documents

    SCOM Intergrate with Services Now, you can refer below links
    http://wiki.servicenow.com/index.php?title=Microsoft_System_Center_Operations_Manager_SCOM_Integration
    http://runbook-automation.com/how-it-process-automation-integrates-with-servicenow/
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
    Mai Ali | My blog: Technical | Twitter:
    Mai Ali

  • I recently update my iphone 5 and had lots of problems.  Apple support helped but now I see that none of my music is downloaded.  Do I have to download each song/playlist individually?

    I recently update my iphone 5 and had lots of problems.  Apple support helped but now I see that none of my music is downloaded.  Do I have to download each song/playlist individually?

    Updated the phone to IOS 7.1.1 but there was a problem with my computer.  Everything was removed from the phone but I couldn't get it back without help.  The tech helped me and everything is fine now except the music.  I did sync it and backed it up but wonder if I should restore backup.  I'm a little nervous to try that, what do you think.

  • Bex Broadcasting w/Print Help Service

    I need to set up BEX Broadcast that will process a web template, then run the Print Help Service, and finally send the output (print formatted) to an email distribution list. 
    How can I set up either the web template or the broadcaster so that it will include the call to the print help service in it's command stream when scheduled through the broadcaster?
    Thanks

    Audrey,
    usually, you don't attach "modify_class" to the URL CMD, rather it needs to be attached to the object tag of the "item".
    Once it is attached to the object tag, you just need to attach "help_serivce" class & the "item" to the URL CMD.
    I've included a few lines of sample code here. Hope it helps.
    <object>
    <param name="HELP_SERVICE" value="ZPRINTING"/>
    <param name="MODIFY_CLASS" VALUE = "ZCL_TABLE_ENHANCE">
             ITEM:            TABLE_1
    </object>
    <A href="JavaScript:window.open(SAP_BW_URL_Get() + '&CMD=PROCESS_HELP_WINDOW&help_service=ZPRINTING&item=TABLE_1');" >

  • Okay I use iPhoto 6 on an older mac and don't want to upgrade past 10.4.11. Can I upgrade iPhoto without the newer operating system? For the life of me I can't get iPhoto to recognize my camera reliably - although it does sometimes. Any advice, help?

    Okay I use iPhoto 6 on an older mac and don't want to upgrade past 10.4.11. Can I upgrade iPhoto without the newer operating system? For the life of me I can't get iPhoto to recognize my camera reliably - although it does sometimes. Any advice, help?

    The latest version of iPhoto which can operation with OS X 10.4.11 is iPhoto 7 which is part of iLife 08.  You might be able to find a copy of iLIfe 08 on Amazon.com or Ebay.com.
    iLife 08's full system requirements are:
    Mac computer with an Intel, PowerPC G5, or PowerPC G4 processor
    iMovie ’08 requires a Mac computer with an Intel processor, a Power Mac G5 (dual 2.0 GHz or faster), or an iMac G5 (1.9 GHz or faster)
    iDVD ’08 requires 733MHz or faster processor
    512 MB of RAM; 1 GB recommended; high-definition video requires at least 1 GB of RAM
    3 GB of available disk space
    DVD drive required for installation
    From: http://support.apple.com/kb/HT1010
    OT

  • Creating a New Help Service

    Hi,
    I am trying to create  a new help service for my web template. To trigger this i use the URL Command (cmd=process_help_window,item=item_1). The Help service class has been created as an ABAP class. How do i control what method of the ABAP object will be called in this case ? Will the process_help_window call up a default method or does it need to be supplied ?
    Thanks
    Shailesh

    Sorry the command that i use is
    &CMD=PROCESS_HELP_WINDOW&HELP_SERVICE=<my_new_service>&ITEM=<my_item> where i have registered the service my_new_service to the item my_item. The class to which this service points is specified in the item properties.
    Thanks
    Shailesh

Maybe you are looking for

  • Confirmation of order quantity

    Hi all, please tell me whether the confirmation of sales order quanity depends on the shipping conditions ? Eg. If requested delivery date(mandatory)  in sales order is 10.06.2008 and shipping conditions is 2days then the order quanity is not getting

  • Retrieve tables and column names in a universe

    Hi - Is there a way to retrieve tables and columns used in a given universe? We have to do analysis and need to know the tables as well as fields used anywhere in any object defined in the universe. I tried Query Builder and did some selection on ci_

  • Cannot hear audio when capturing video.

    I'm an owner of a skate shop. I doing filming frequently, and just recently got my first Mac computer. I got FCE4 for capturing and editing my footage for a video that I'm working on. Just started using it today, have no idea how to get the audio to

  • Changing Re-recording 'waiting' time

    Hi, Does anyone know how to change the waiting time when using a re-record script. I'm using using a re-recording script and for some reason Captivate believes it has to wait for 15 seconds between certain actions - when it actually doesn't need to.

  • Does anyone know the best practices to use Captivates on an Elearning course, please...

    I need to know the best practices to use captivates on an eLearning course, as how much information should it has, etc..