Catching a successful provision with errors

Environment=Idm 7.1.1.4 on Solaris
I am checking in a view to create an AD account. The provision successfully creates the account, but fails to assign one of the groups for whatever reason. Does anyone know how I can easily detect that the provision was actually successful without having to write a routine to check if the account exists? I would like to send the success notification to the new user's supervisor.
Thanks - T -
Edited by: TD_ROC on Aug 28, 2008 6:52 AM

Strictly speaking, provisioning was NOT successful in case there is any error - even if it is "just" about "some darn group" like in your case. I would NOT work around the error handling of IDM or do something like ignoring/dropping this one error but rather solve the underlying problem on AD.
There has got to be a reason for the failure of the operation. It is nice the user was created but for what you specified IDM has to do, there still was an error.
Can you work around the whole thing, meaning, do you have to care about those group assignments at all, are they mapped in Identity Manager or automatically assigned on AD? Could you skip that or is it necessary?
cheers

Similar Messages

  • Error during Exchange 2007 mailbox provisioning with IDM 8.1.1.1

    Hi
    We want to create Exchange 2007 mailboxes from IDM.
    When we let Exchange set the SMTP address (EmailAddressPolicyEnabled=true), it works fine
    But when we set the SMTP address in IDM with the attribute PrimarySmtpAddress (and EmailAddressPolicyEnabled=false) there are an error and an information in the provisioning task
    Error : PowerShell:6c13f14c-3825-4064-a585-48b4756de3a3 is not a mailbox user
    Information : Added exchange mailbox to the user based on the RecipientType change from: 'User' to: 'UserMailbox'
    We see that the mailbox has the SMTP address set by Exchange.
    After 5mn, the task ends successfully and we see that the SMTP address is the one set by the IDM attribute PrimarySmtpAddress.
    We guess that this error is caused by the active directory replication delay between controllers.
    Does anybody know how to solve this problem ?
    Thank you

    Hi Patrick
    Thank you for your answer.
    The cmdlet enable-mailbox can be used with the PrimarySmtpAddress option and, in this case, the EmailAddressPolicyEnabled option is automatically set to false.
    Cf. the MS technet help : "The PrimarySmtpAddress parameter specifies the primary SMTP address for the mailbox. By default, the primary SMTP address is generated based on the default e-mail address policy. If you specify a primary SMTP address by using this parameter, the command sets the EmailAddressPolicyEnabled attribute of the mailbox to $false, and the e-mail addresses of this mailbox aren't automatically updated based on e-mail address policies."
    I have tested this option on our Exchange 2007 environment and it works fine.
    In IDM if PrimarySmtpAddress is used but not EmailAddressPolicyEnabled, there is an error : "PowerShell:The e-mail addresses for this recipient are automatically generated based on e-mail address policies. To modify the primary SMTP address for this recipient, you must disable automatic updating of e-mail addresses based on e-mail address policy”
    If PrimarySmtpAddress is used and EmailAddressPolicyEnabled is set to false, then the log shows that 2 powershell commands are run by the gateway, the second immediately after the first.
    Enable-Mailbox with the parameters -Identity and -Database, run with no error
    Set-Mailbox with the parameters -Identity, -EmailAddressPolicyEnabled (set to FALSE) and -PrimarySmtpAddress, run with the error “…is not a mailbox user.”
    After 5 mn (the retry delay) another powershell command is run :
    Set-Mailbox with the parameters -Identity, -EmailAddressPolicyEnabled (set to FALSE) and -PrimarySmtpAddress, run with no error.
    The solution would be that IDM, when PrimarySmtpAddress is set, runs only the command Enable-Mailbox with the parameters PrimarySmtpAddress, which set automatically EmailAddressPolicyEnabled to FALSE
    Gilles

  • [OIM] Error in Direct Provisioning (with auto save form) - GTC DB App Table

    Hi,
    I am getting an error when setting up direct provision of a GTC DB App Conn using OIM access policy (and group membership) or through manual provisioning with prepopulate and auto save form.
    Manual provisioning with prepopulate ONLY (not with auto save form) WORKS!!!
    Some information about my OIM config:
    - Prepopulate adapters are set up on both forms (parent and child)
    - "Auto prepopulate" and "Auto save form" are set up at Process Definition
    - For direct provisioning, I have created an access policy with an associated group which has a membership rule
    What it is working:
    - Provisioning manually, using prepopulate adapters only, not auto save form. Both tables are updated properly
    - All *3 tasks are called and finished with status=Completed*: "System Validation", "Create User" and "Child Table UD_<connector child table name>_US row Inserted"
    Testing direct provisioning:
    - I have tested adding the resource manually with prepopulate and autosave form configured, and also through access policy/group membership. The error is the same on both tests
    - The resource is displayed as provisioned and it is created an entry in the parent table of the resource, but not on child table
    - I also observed that only: "System Validation" and "Create User" tasks were executed (status=Completed). But it is missing the task "Child Table UD_<connector child table name>_US row Inserted"
    - The error log info displays only an error regarding to UGP table (Groups info) but I am not sure if that is the cause of entry creation on child table.
    It seems the SQL stmt tries to get ugp_name (group name) using ugp_key but that has null value.
    "SELECT ugp_name FROM ugp WHERE ugp_key=java.sql.SQLSyntaxErrorException: ORA-00936: missing expression"
    Note: When testing manually (without auto save form), I got "SELECT ugp_name FROM ugp WHERE ugp_key=1" which it is the same SQL stmt but the value is provided.
    My guess:
    - It seems that error is aborting the whole execution process so "Child Table UD_<connector child table name>_US row Inserted" task does not run, even though previous tasks are finished with the status=Completed. Consequently, the entry is not created on child table.
    Please, any guess or help would be very helpful. In case nothing works, I guess I will have to create and customize a "Update child Form" task as an workaround which would be called after "Create User" task.
    Regards,
    Hugo
    My environment:
    - Windows 2003, WebLogic 10.3.0.0, OIM 9.1.0.2 BL4, Oracle 10g, Java 1.6, DB App Table Connector 9.1.0.2 (from October 2009)
    - Target Resource: Parent and Child Table (Oracle 10g - the same OIM DB)

    An update:
    I solved that error about "ORA-00936: missing expression" applying OIM 9.1.0.2 BP05. That was not impacting my issue regarding direct provisioning with auto save form and child form.
    So please if anyone can confirm:
    - Can I set up prepopulate adapters on child forms AND also use "auto save form" on GTC DB App Table connector?
    If not, any suggestion?
    Regards
    Hugo

  • Failed to provision site PWA with error: Microsoft.Office.Project.Server.Administration.ProvisionException: To create databases we need dbcreator and securityadmin server roles on servers.

    I'm getting the following errors while trying to provision a PS 2010 PWA on our SharePoint 2010 farm. Our PS instance has been working for a while now, and houses two other PWAs. But today,
    when trying to create this one, I get "Failed - see the Application event Log" and the following in the Event Viewer:
    Log Name: Application
    Source: Microsoft-SharePoint Products-Project Server
    Date: 4/2/2014 2:09:08 PM
    Event ID: 6980
    Task Category: Provisioning
    Level: Error
    Keywords:
    User: DOMAIN\DB_Access
    Computer: server
    Description:
    Provisioning 'PWA/SDN': To create databases we need dbcreator and securityadmin server roles on servers 'DB1' and 'DB1'.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    <System>
    <Provider Name="Microsoft-SharePoint Products-Project Server" Guid="{b2178104-1b5b-4c20-8c8f-960678ced9e5}" />
    <EventID>6980</EventID>
    <Version>14</Version>
    <Level>2</Level>
    <Task>20</Task>
    <Opcode>0</Opcode>
    <Keywords>0x4000000000000000</Keywords>
    <TimeCreated SystemTime="2014-04-02T19:09:08.225Z" />
    <EventRecordID>1676727</EventRecordID>
    <Correlation ActivityID="{90131653-B0A4-4FAF-A43C-7DF07CBC3332}" />
    <Execution ProcessID="11040" ThreadID="12384" />
    <Channel>Application</Channel>
    <Computer>sharepoint</Computer>
    <Security UserID="S-1-5-21-2280669542-4145173436-3058324265-4222" />
    </System>
    <EventData>
    <Data Name="string0">PWA/SDN</Data>
    <Data Name="string1">DB1</Data>
    <Data Name="string2">DB1</Data>
    </EventData>
    </Event>
    Log Name: Application
    Source: Microsoft-SharePoint Products-Project Server
    Date: 4/2/2014 2:09:08 PM
    Event ID: 6993
    Task Category: Provisioning
    Level: Error
    Keywords:
    User: DOMAIN\DB_Access
    Computer: sharepoint
    Description:
    Provisioning 'PWA/SDN': Failed to provision databases. An exception occurred: To create databases we need dbcreator and securityadmin server roles on servers..
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    <System>
    <Provider Name="Microsoft-SharePoint Products-Project Server" Guid="{b2178104-1b5b-4c20-8c8f-960678ced9e5}" />
    <EventID>6993</EventID>
    <Version>14</Version>
    <Level>2</Level>
    <Task>20</Task>
    <Opcode>0</Opcode>
    <Keywords>0x4000000000000000</Keywords>
    <TimeCreated SystemTime="2014-04-02T19:09:08.225Z" />
    <EventRecordID>1676728</EventRecordID>
    <Correlation ActivityID="{90131653-B0A4-4FAF-A43C-7DF07CBC3332}" />
    <Execution ProcessID="11040" ThreadID="12384" />
    <Channel>Application</Channel>
    <Computer>sharepoint</Computer>
    <Security UserID="S-1-5-21-2280669542-4145173436-3058324265-4222" />
    </System>
    <EventData>
    <Data Name="string0">PWA/SDN</Data>
    <Data Name="string1">To create databases we need dbcreator and securityadmin server roles on servers.</Data>
    </EventData>
    </Event>
    Log Name: Application
    Source: Microsoft-SharePoint Products-Project Server
    Date: 4/2/2014 2:09:08 PM
    Event ID: 6958
    Task Category: Provisioning
    Level: Error
    Keywords:
    User: DOMAIN\DB_Access
    Computer: sharepoint
    Description:
    Provisioning 'PWA/SDN': Database provisioning failed.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    <System>
    <Provider Name="Microsoft-SharePoint Products-Project Server" Guid="{b2178104-1b5b-4c20-8c8f-960678ced9e5}" />
    <EventID>6958</EventID>
    <Version>14</Version>
    <Level>2</Level>
    <Task>20</Task>
    <Opcode>0</Opcode>
    <Keywords>0x4000000000000000</Keywords>
    <TimeCreated SystemTime="2014-04-02T19:09:08.225Z" />
    <EventRecordID>1676729</EventRecordID>
    <Correlation ActivityID="{90131653-B0A4-4FAF-A43C-7DF07CBC3332}" />
    <Execution ProcessID="11040" ThreadID="12384" />
    <Channel>Application</Channel>
    <Computer>sharepoint</Computer>
    <Security UserID="S-1-5-21-2280669542-4145173436-3058324265-4222" />
    </System>
    <EventData>
    <Data Name="string0">PWA/SDN</Data>
    </EventData>
    </Event>
    Log Name: Application
    Source: Microsoft-SharePoint Products-Project Server
    Date: 4/2/2014 2:09:08 PM
    Event ID: 6971
    Task Category: Provisioning
    Level: Error
    Keywords:
    User: DOMAIN\DB_Access
    Computer: sharepoint
    Description:
    Failed to provision site PWA/SDN with error: Microsoft.Office.Project.Server.Administration.ProvisionException: Failed to provision databases. ---> Microsoft.Office.Project.Server.Administration.ProvisionException: To create databases we need dbcreator and
    securityadmin server roles on servers.
    at Microsoft.Office.Project.Server.Administration.PsiServiceApplication.EnsureDatabases(ProjectProvisionSettings provset, SPSite pwaSite, String adminName, String adminEmail, ProjectDatabaseStateType& originalDatabaseState, Guid& adminGuid)
    --- End of inner exception stack trace ---
    at Microsoft.Office.Project.Server.Administration.PsiServiceApplication.EnsureDatabases(ProjectProvisionSettings provset, SPSite pwaSite, String adminName, String adminEmail, ProjectDatabaseStateType& originalDatabaseState, Guid& adminGuid)
    at Microsoft.Office.Project.Server.Administration.PsiServiceApplication.CreateSite(ProjectProvisionSettings provset)
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    <System>
    <Provider Name="Microsoft-SharePoint Products-Project Server" Guid="{b2178104-1b5b-4c20-8c8f-960678ced9e5}" />
    <EventID>6971</EventID>
    <Version>14</Version>
    <Level>2</Level>
    <Task>20</Task>
    <Opcode>0</Opcode>
    <Keywords>0x4000000000000000</Keywords>
    <TimeCreated SystemTime="2014-04-02T19:09:08.226Z" />
    <EventRecordID>1676730</EventRecordID>
    <Correlation ActivityID="{90131653-B0A4-4FAF-A43C-7DF07CBC3332}" />
    <Execution ProcessID="11040" ThreadID="12384" />
    <Channel>Application</Channel>
    <Computer>sharepoint</Computer>
    <Security UserID="S-1-5-21-2280669542-4145173436-3058324265-4222" />
    </System>
    <EventData>
    <Data Name="string0">PWA/SDN</Data>
    <Data Name="string1">Microsoft.Office.Project.Server.Administration.ProvisionException: Failed to provision databases. ---&gt; Microsoft.Office.Project.Server.Administration.ProvisionException: To create databases we need dbcreator and securityadmin
    server roles on servers.
    at Microsoft.Office.Project.Server.Administration.PsiServiceApplication.EnsureDatabases(ProjectProvisionSettings provset, SPSite pwaSite, String adminName, String adminEmail, ProjectDatabaseStateType&amp; originalDatabaseState, Guid&amp; adminGuid)
    --- End of inner exception stack trace ---
    at Microsoft.Office.Project.Server.Administration.PsiServiceApplication.EnsureDatabases(ProjectProvisionSettings provset, SPSite pwaSite, String adminName, String adminEmail, ProjectDatabaseStateType&amp; originalDatabaseState, Guid&amp; adminGuid)
    at Microsoft.Office.Project.Server.Administration.PsiServiceApplication.CreateSite(ProjectProvisionSettings provset)</Data>
    </EventData>
    </Event>
    Anybody ever get any events like this before? I'm not finding much or nothing on Google or on other forums, so I thought I would run it past and see if anyone has experienced anything of a similar
    nature. And yes, the farm account obviously has creator/secadmin permissions, at this point of our deployment....
    I look forward to any and all feedback. Thanks and good afternoon!

    I figured out the answer to this myself. For those few who might run into something akin to my error...
    During the off-hours of where I work, I re-applied the farm account credentials to all dB server VM SQL services that had the account for a log-on (i.e., MSSQLSERVER, SQLSERVERAGENT, etc.) as well as all SharePoint services on our WFE/App Server VM (a two
    server farm is what we host), in that order. Then I rebooted the dB server first, followed by the SharePoint server. Upon coming back, everything was working fine again. I was able to provision a site, no probelm, and it seemed to even be a little snappier
    when doing so.
    One note: doing this procedure gave me a "One or more services have started or stopped unexpectedly" error in the Health Analyzer, for the SPTimerV4 service. When you get this, simply enter into the item and click on "Reanalyze Now;" this will quickly clear
    the error out of the Analyzer, and all should be right with the world! :)

  • My iPhone 4S . the restore Ends at 60 % with error 1 (not -1). I reinstall iTunes, download iOS 7.0.3 as ipsw and No success :(   I Think that is a problem of the iTunes or firmware versions :/.   Apple Please Help us!

    my iPhone 4S the restore Ends at 60 % with error 1 (not -1).
    I reinstall iTunes, download iOS 7.0.1 as ipsw and No success
    I Think that is a problem of the iTunes or firmware versions :/.
    Apple Please Help us!

    You can't Restore to any iOS other than 7.1.
    If the error persists, try on another computer. Still no joy, it is a hardware failure.

  • TS1368 I was downloading some movies, (2 successful) and the 3rd movie- Adventures of Rin Tin, has stopped download with error message -.50???

    I was downloading some movies, (2 successful) and the 3rd movie- Adventures of Rin Tin, has stopped download with error message -.50???

    Perhaps try the "Error -50," "-5000," "8003," "8008," or "-42023" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
    iTunes: Advanced iTunes Store troubleshooting

  • Session completed successfully with errors reported in error tables.

    Which table would contain the errors for this error message?
    "Session completed successfully with errors reported in error tables."
    The Snp_Exp_Txt table?
    Edited by: user8702914 on Mar 2, 2011 11:28 AM

    Sutirtha,
    The FLOW_CONTROL option must be set to 'Yes', as it is the CKM that creates and populates the E$ table. If it was set to 'No' there would not be any 'errors reported in error table' as the error table would not exist.
    Cheers
    Bos

  • I do have an iphone4s with me and whats happening now is that it is stuck in the "itunes logo". What i did is that i try restoring the phone with itunes but it didnt go through. The process was not successful. An error appeared and it stops the restore.

    I do have an iphone4s with me and whats happening now is that it is stuck in the "itunes logo". What i did is that i try restoring the phone with itunes but it didnt go through. The process was not successful. An error appeared and it stops the restore. PLEASE HELP

    I did restore my phone last week, it went well. Today, i turned my phone off and turn it back on, now it is stuck in itunes logo and i was thinking that it needs a restore again. Once i tried restoring it, it finishes the "Extracting iPhone Software" part, but after that the error appears. PLEASE HELP ME

  • SSIS custom execute sql task : Failed with error

    I am developing a custom SSIS task for running sql task. But it fails with error - I'm trying to set the resultsetbinding to be used by next task in workflow.
    Error: 0xC0014054 at CustomSSISTask: Failed to lock variable "User::id" for read access with error 0xC0010001 "The variable cannot be found. This occurs when an attempt is made to retrieve a variable from the Variables collection on a container
    during execution of the package, and the variable is not there. The variable name may have changed or the variable is not being created.".
    Error: 0xC002F210 at CustomSSISTask, Execute SQL Task: Executing the query "SELECT id FROM sysobjects WHERE name = 'sysrowsets..." failed with the following error: "Failed to lock variable "User::id" for read access with error 0xC0010001
    "The variable cannot be found. This occurs when an attempt is made to retrieve a variable from the Variables collection on a container during execution of the package, and the variable is not there. The variable name may have changed or the variable is
    not being created.".
    ". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
    Warning: 0x80019002 at CustomSSISTask: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED.  The Execution method succeeded, but the number of errors raised (3) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches
    the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
    Task failed: CustomSSISTask
    Here is the code sample I'm trying , 
            public override DTSExecResult Execute(Connections connections, VariableDispenser variableDispenser,
                                                  IDTSComponentEvents componentEvents, IDTSLogging log, object transaction)
                MessageBox.Show("testing:");
                try
                    // Add the SQL Task
                    Package package = new Package();
                    package.Executables.Add("STOCK:SQLTask");
                    Microsoft.SqlServer.Dts.Runtime.Variable variable = package.Variables.Add("id", false, "User", 0);
                     // Get the task host wrapper
                    TaskHost taskHost = package.Executables[0] as TaskHost;
                    // Get the task object
                    ExecuteSQLTask task = taskHost.InnerObject as ExecuteSQLTask;
                    // Set core properties
                    task.Connection = connections[0].Name;
                    task.SqlStatementSource = "SELECT id FROM sysobjects WHERE name = 'sysrowsets'";
                    //task.SqlStatementSource =
                    //    "SELECT PersonID from [AmalgaSpeedTableData].[SpeedTable].[DimPerson] where PersonIntID  = '1'";
                    task.SqlStatementSourceType = SqlStatementSourceType.DirectInput;
                    // Add result set binding, map the id column to variable
                    IDTSResultBinding resultBinding = task.ResultSetBindings.Add();
                    //IDTSResultBinding resultBinding = task.ResultSetBindings.GetBinding(0);
                    resultBinding.ResultName = "variable";
                    resultBinding.DtsVariableName = variable.QualifiedName; //"User::id";
                    task.Execute(connections, variableDispenser, componentEvents, log, transaction);
                catch (Exception ex)
                    throw new ArgumentException(ex.Message);
                return DTSExecResult.Success;
    It doesnt throw any exception but custom task fails.
    Later I will be also using parametersetbindings to pass some input parameters to this task , since I'm stuck for out param - blocked moving ahead.
    Any help would be greatly appreciated.
    Thanks
    Sang

    Hi, could you check whether the following threads help:
    http://stackoverflow.com/questions/5787621/ssis-package-failed-to-locak-variable-for-read-access-with-error-0xc0010001
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/40ee7eff-5ec1-426f-a1a8-ab85b40b51aa/error-variable-can-not-be-found-while-executing-package-from-the-net-code?forum=sqlintegrationservices
    Regards, Leo

  • Issues in IDoc Sender Scenario:IDoc  with errors added

    Hi all
             Am working on an IDoc to JDBC scenario. In R/3 system, I have created distribution model, partner profile, RFC destination and port.The IDoc is generated and is sent to XI successfully. But in XI , there is no entry in SXI_MONITOR for this (unfortunately IDX5 is not available in the XI server! ;as of now). Instead an entry is made in WE05 and WE02 with stautus 56(IDoc with errors added). In the status record:
    status 56 : External segment name E2KOMG003 cannot be interpreted
    status 60 : Basic IDoc type COND_A03 could not be found.
    And the segments displayed in data record  are different from the segments in the data record of the IDoc generated at R/3. (say for E1KOMG at R/3, E2KOMG003 in XI).Earlier the flow was working fine and the DB table was updated successfully. And the entire stuff is believed to be 'unmodified' .
    Would any one help in resolving the issue.
    Thanks,
    Chilanka

    Hi,
    >>>>I have created partenr profile in R/3.Need I create a partner profile in XI for R/3 system?
    no you cannot create any partner profiles in XI
    for more about IDOC configuration in XI check :
    <a href="/people/michal.krawczyk2/blog/2006/10/11/xi-new-book-mastering-idoc-business-scenarios-with-sap-xi"><b>Mastering IDoc Business Scenarios with SAP XI</b></a>
    Regards,
    michal
    <a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

  • SAP on V6R1 - ABAP Import:Program 'Migration Monitor' exits with error code

    Hello,
    We are doing an installation of SAP NW 7.01 SR1 on V6R1.
    <br>
    We were getting error in SAPAPPL2.TSK.bck we merged the files with following command:R3load --merge_only <TSK file> and refering sap note:Note 455195 - R3load: Use of TSK files.
    <br>
    We are again getting error in following steps:
    <br>
    sapinst.log
    <br>
    <br>WARNING 2009-09-30 23:25:28.477
    Execution of the command "Y:\QOpenSys\QIBM\ProdData\JavaVM\jdk14\64bit\bin\java -classpath migmon.jar -showversion -Xmx1024m com.sap.inst.migmon.imp.ImportMonitor -sapinst" finished with return code 103. Output:
    java version "1.4.2"
    Java(TM) 2 Runtime Environment, Standard Edition (build 2.3)
    IBM J9 VM (build 2.3, J2RE 1.4.2 IBM J9 2.3 OS400 ppc64-64 j9ap64142sr13-20090310 (JIT enabled)
    J9VM - 20090309_31291_BHdSMr
    JIT  - 20090210_1447ifx1_r8
    GC   - 200902_24)
    I<br>mport Monitor jobs: running 1, waiting 27, completed 0, failed 0, total 28.
    <br>Loading of 'SAPNTAB' import package: OK
    <br>Import Monitor jobs: running 0, waiting 27, completed 1, failed 0, total 28.
    Import Monitor jobs: running 1, waiting 26, completed 1, failed 0, total 28.<br>
    Import Monitor jobs: running 2, waiting 25, completed 1, failed 0, total 28.<br>
    Import Monitor jobs: running 3, waiting 24, completed 1, failed 0, total 28.<br>
    Loading of 'DOKCLU' import package: OK
    Import Monitor jobs: running 2, waiting 24, completed 2, failed 0, total 28.<br>
    Import Monitor jobs: running 3, waiting 23, completed 2, failed 0, total 28.<br>
    Loading of 'SAPAPPL1' import package: OK
    Import Monitor jobs: running 2, waiting 23, completed 3, failed 0, total 28.<br>
    Import Monitor jobs: running 3, waiting 22, completed 3, failed 0, total 28.<br>
    Loading of 'SAPAPPL2' import package: ERROR
    Import Monitor jobs: running 2, waiting 22, completed 3, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 21, completed 3, failed 1, total 28.<br>
    Loading of 'DD03L' import package: OK
    Import Monitor jobs: running 2, waiting 21, completed 4, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 20, completed 4, failed 1, total 28.<br>
    Loading of 'SCPRSVALS' import package: OK
    Import Monitor jobs: running 2, waiting 20, completed 5, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 19, completed 5, failed 1, total 28.<br>
    Loading of 'SAPSDIC' import package: OK
    Import Monitor jobs: running 2, waiting 19, completed 6, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 18, completed 6, failed 1, total 28.<br>
    Loading of 'SCPRVALS' import package: OK
    Import Monitor jobs: running 2, waiting 18, completed 7, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 17, completed 7, failed 1, total 28.<br>
    Loading of 'SAPSSRC' import package: OK
    Import Monitor jobs: running 2, waiting 17, completed 8, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 16, completed 8, failed 1, total 28.<br>
    Loading of 'FUPARAREF' import package: OK
    Import Monitor jobs: running 2, waiting 16, completed 9, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 15, completed 9, failed 1, total 28.<br>
    Loading of 'TODIR' import package: OK
    Import Monitor jobs: running 2, waiting 15, completed 10, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 14, completed 10, failed 1, total 28.<br>
    Loading of 'SEOSUBCODF' import package: OK
    Import Monitor jobs: running 2, waiting 14, completed 11, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 13, completed 11, failed 1, total 28.<br>
    Loading of 'E071K' import package: OK
    Import Monitor jobs: running 2, waiting 13, completed 12, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 12, completed 12, failed 1, total 28.<br>
    Loading of 'SAPPOOL' import package: OK
    Import Monitor jobs: running 2, waiting 12, completed 13, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 11, completed 13, failed 1, total 28.<br>
    Loading of 'SAPSPROT' import package: OK
    Import Monitor jobs: running 2, waiting 11, completed 14, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 10, completed 14, failed 1, total 28.<br>
    Loading of 'SAPSDOCU' import package: OK
    Import Monitor jobs: running 2, waiting 10, completed 15, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 9, completed 15, failed 1, total 28.<br>
    Loading of 'SAPCLUST' import package: OK
    Import Monitor jobs: running 2, waiting 9, completed 16, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 8, completed 16, failed 1, total 28.<br>
    Loading of 'SAPSLOAD' import package: OK
    Import Monitor jobs: running 2, waiting 8, completed 17, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 7, completed 17, failed 1, total 28.<br>
    Loading of 'SAPSLEXC' import package: OK
    Import Monitor jobs: running 2, waiting 7, completed 18, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 6, completed 18, failed 1, total 28.<br>
    Loading of 'SAPUSER' import package: OK
    Import Monitor jobs: running 2, waiting 6, completed 19, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 5, completed 19, failed 1, total 28.<br>
    Loading of 'SAPDDIM' import package: OK
    Import Monitor jobs: running 2, waiting 5, completed 20, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 4, completed 20, failed 1, total 28.<br>
    Loading of 'SAPDFACT' import package: OK
    Import Monitor jobs: running 2, waiting 4, completed 21, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 3, completed 21, failed 1, total 28.<br>
    Loading of 'SAPDODS' import package: OK
    Import Monitor jobs: running 2, waiting 3, completed 22, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 2, completed 22, failed 1, total 28.<br>
    Loading of 'SAPUSER1' import package: OK
    Import Monitor jobs: running 2, waiting 2, completed 23, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 1, completed 23, failed 1, total 28.<br>
    Loading of 'SAP0000' import package: OK
    Import Monitor jobs: running 2, waiting 1, completed 24, failed 1, total 28.<br>
    Loading of 'SAPAPPL0' import package: OK
    Import Monitor jobs: running 1, waiting 1, completed 25, failed 1, total 28.<br>
    Loading of 'SAPSSEXC' import package: OK
    Import Monitor jobs: running 0, waiting 1, completed 26, failed 1, total 28.<br>
    <br>
    WARNING[E] 2009-09-30 23:25:28.524
    CJS-30022  Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log,
    <br>
    ERROR 2009-09-30 23:25:28.914
    FCO-00011  The step runMigrationMonitor with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
    <br>
    <br>import_monitor.log.
    <br>****************************************************************************************************************************************************
    <br>INFO: 2009-09-30 23:26:33 com.sap.inst.migmon.LoadTask run
    Loading of 'SAP0000' import package is successfully completed.
    <br>
    INFO: 2009-09-30 23:30:31 com.sap.inst.migmon.LoadTask run
    Loading of 'SAPAPPL0' import package is successfully completed.
    <br>
    INFO: 2009-09-30 23:31:16 com.sap.inst.migmon.LoadTask run
    Loading of 'SAPSSEXC' import package is successfully completed.
    <br>
    WARNING: 2009-09-30 23:31:31
    Cannot start import of packages with views because not all import packages with tables are loaded successfully.
    WARNING: 2009-09-30 23:31:31
    1 error(s) during processing of packages.
    INFO: 2009-09-30 23:31:31
    Import Monitor is stopped.
    <br>*************************************************************************************************************************************************
    <br>SAPAPPL02.LOG
    <br>**************************************************************************************************************************************************
    <br>TVV1 in *LIBL type *FILE not found. MSGID= Job=015908/SAPINST/QJVAEXEC
    (IMP) INFO: a failed DROP attempt is not necessarily a problem
    (DB) INFO: TVV1 created #20091001110304
    <br>
    (DB) INFO: TVV1 deleted/truncated #20091001110304
    <br>
    (IMP) INFO: import of TVV1 completed (0 rows) #20091001110304
    <br>
    (DB) ERROR: DDL statement failed<br>
    (ALTER TABLE "TVV1" DROP PRIMARY KEY )<br>
    DbSlExecute: rc = 99<br>
      (SQL error -539)<br>
      error message returned by DbSl:
    Table TVV1 in R3E04DATA does not have a primary or unique key. MSGID= Job=015908/SAPINST/QJVAEXEC
    Your inputs will help a lot.
    Regards,
    Prasad

    Hello,
    We are doing an installation of SAP NW 7.01 SR1 on V6R1.
    <br>
    We were getting error in SAPAPPL2.TSK.bck we merged the files with following command:R3load --merge_only <TSK file> and refering sap note:Note 455195 - R3load: Use of TSK files.
    <br>
    We are again getting error in following steps:
    <br>
    sapinst.log
    <br>
    <br>WARNING 2009-09-30 23:25:28.477
    Execution of the command "Y:\QOpenSys\QIBM\ProdData\JavaVM\jdk14\64bit\bin\java -classpath migmon.jar -showversion -Xmx1024m com.sap.inst.migmon.imp.ImportMonitor -sapinst" finished with return code 103. Output:
    java version "1.4.2"
    Java(TM) 2 Runtime Environment, Standard Edition (build 2.3)
    IBM J9 VM (build 2.3, J2RE 1.4.2 IBM J9 2.3 OS400 ppc64-64 j9ap64142sr13-20090310 (JIT enabled)
    J9VM - 20090309_31291_BHdSMr
    JIT  - 20090210_1447ifx1_r8
    GC   - 200902_24)
    I<br>mport Monitor jobs: running 1, waiting 27, completed 0, failed 0, total 28.
    <br>Loading of 'SAPNTAB' import package: OK
    <br>Import Monitor jobs: running 0, waiting 27, completed 1, failed 0, total 28.
    Import Monitor jobs: running 1, waiting 26, completed 1, failed 0, total 28.<br>
    Import Monitor jobs: running 2, waiting 25, completed 1, failed 0, total 28.<br>
    Import Monitor jobs: running 3, waiting 24, completed 1, failed 0, total 28.<br>
    Loading of 'DOKCLU' import package: OK
    Import Monitor jobs: running 2, waiting 24, completed 2, failed 0, total 28.<br>
    Import Monitor jobs: running 3, waiting 23, completed 2, failed 0, total 28.<br>
    Loading of 'SAPAPPL1' import package: OK
    Import Monitor jobs: running 2, waiting 23, completed 3, failed 0, total 28.<br>
    Import Monitor jobs: running 3, waiting 22, completed 3, failed 0, total 28.<br>
    Loading of 'SAPAPPL2' import package: ERROR
    Import Monitor jobs: running 2, waiting 22, completed 3, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 21, completed 3, failed 1, total 28.<br>
    Loading of 'DD03L' import package: OK
    Import Monitor jobs: running 2, waiting 21, completed 4, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 20, completed 4, failed 1, total 28.<br>
    Loading of 'SCPRSVALS' import package: OK
    Import Monitor jobs: running 2, waiting 20, completed 5, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 19, completed 5, failed 1, total 28.<br>
    Loading of 'SAPSDIC' import package: OK
    Import Monitor jobs: running 2, waiting 19, completed 6, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 18, completed 6, failed 1, total 28.<br>
    Loading of 'SCPRVALS' import package: OK
    Import Monitor jobs: running 2, waiting 18, completed 7, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 17, completed 7, failed 1, total 28.<br>
    Loading of 'SAPSSRC' import package: OK
    Import Monitor jobs: running 2, waiting 17, completed 8, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 16, completed 8, failed 1, total 28.<br>
    Loading of 'FUPARAREF' import package: OK
    Import Monitor jobs: running 2, waiting 16, completed 9, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 15, completed 9, failed 1, total 28.<br>
    Loading of 'TODIR' import package: OK
    Import Monitor jobs: running 2, waiting 15, completed 10, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 14, completed 10, failed 1, total 28.<br>
    Loading of 'SEOSUBCODF' import package: OK
    Import Monitor jobs: running 2, waiting 14, completed 11, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 13, completed 11, failed 1, total 28.<br>
    Loading of 'E071K' import package: OK
    Import Monitor jobs: running 2, waiting 13, completed 12, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 12, completed 12, failed 1, total 28.<br>
    Loading of 'SAPPOOL' import package: OK
    Import Monitor jobs: running 2, waiting 12, completed 13, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 11, completed 13, failed 1, total 28.<br>
    Loading of 'SAPSPROT' import package: OK
    Import Monitor jobs: running 2, waiting 11, completed 14, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 10, completed 14, failed 1, total 28.<br>
    Loading of 'SAPSDOCU' import package: OK
    Import Monitor jobs: running 2, waiting 10, completed 15, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 9, completed 15, failed 1, total 28.<br>
    Loading of 'SAPCLUST' import package: OK
    Import Monitor jobs: running 2, waiting 9, completed 16, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 8, completed 16, failed 1, total 28.<br>
    Loading of 'SAPSLOAD' import package: OK
    Import Monitor jobs: running 2, waiting 8, completed 17, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 7, completed 17, failed 1, total 28.<br>
    Loading of 'SAPSLEXC' import package: OK
    Import Monitor jobs: running 2, waiting 7, completed 18, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 6, completed 18, failed 1, total 28.<br>
    Loading of 'SAPUSER' import package: OK
    Import Monitor jobs: running 2, waiting 6, completed 19, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 5, completed 19, failed 1, total 28.<br>
    Loading of 'SAPDDIM' import package: OK
    Import Monitor jobs: running 2, waiting 5, completed 20, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 4, completed 20, failed 1, total 28.<br>
    Loading of 'SAPDFACT' import package: OK
    Import Monitor jobs: running 2, waiting 4, completed 21, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 3, completed 21, failed 1, total 28.<br>
    Loading of 'SAPDODS' import package: OK
    Import Monitor jobs: running 2, waiting 3, completed 22, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 2, completed 22, failed 1, total 28.<br>
    Loading of 'SAPUSER1' import package: OK
    Import Monitor jobs: running 2, waiting 2, completed 23, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 1, completed 23, failed 1, total 28.<br>
    Loading of 'SAP0000' import package: OK
    Import Monitor jobs: running 2, waiting 1, completed 24, failed 1, total 28.<br>
    Loading of 'SAPAPPL0' import package: OK
    Import Monitor jobs: running 1, waiting 1, completed 25, failed 1, total 28.<br>
    Loading of 'SAPSSEXC' import package: OK
    Import Monitor jobs: running 0, waiting 1, completed 26, failed 1, total 28.<br>
    <br>
    WARNING[E] 2009-09-30 23:25:28.524
    CJS-30022  Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log,
    <br>
    ERROR 2009-09-30 23:25:28.914
    FCO-00011  The step runMigrationMonitor with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
    <br>
    <br>import_monitor.log.
    <br>****************************************************************************************************************************************************
    <br>INFO: 2009-09-30 23:26:33 com.sap.inst.migmon.LoadTask run
    Loading of 'SAP0000' import package is successfully completed.
    <br>
    INFO: 2009-09-30 23:30:31 com.sap.inst.migmon.LoadTask run
    Loading of 'SAPAPPL0' import package is successfully completed.
    <br>
    INFO: 2009-09-30 23:31:16 com.sap.inst.migmon.LoadTask run
    Loading of 'SAPSSEXC' import package is successfully completed.
    <br>
    WARNING: 2009-09-30 23:31:31
    Cannot start import of packages with views because not all import packages with tables are loaded successfully.
    WARNING: 2009-09-30 23:31:31
    1 error(s) during processing of packages.
    INFO: 2009-09-30 23:31:31
    Import Monitor is stopped.
    <br>*************************************************************************************************************************************************
    <br>SAPAPPL02.LOG
    <br>**************************************************************************************************************************************************
    <br>TVV1 in *LIBL type *FILE not found. MSGID= Job=015908/SAPINST/QJVAEXEC
    (IMP) INFO: a failed DROP attempt is not necessarily a problem
    (DB) INFO: TVV1 created #20091001110304
    <br>
    (DB) INFO: TVV1 deleted/truncated #20091001110304
    <br>
    (IMP) INFO: import of TVV1 completed (0 rows) #20091001110304
    <br>
    (DB) ERROR: DDL statement failed<br>
    (ALTER TABLE "TVV1" DROP PRIMARY KEY )<br>
    DbSlExecute: rc = 99<br>
      (SQL error -539)<br>
      error message returned by DbSl:
    Table TVV1 in R3E04DATA does not have a primary or unique key. MSGID= Job=015908/SAPINST/QJVAEXEC
    Your inputs will help a lot.
    Regards,
    Prasad

  • Windows Update Client failed to detect with error 0xc8000247 after using Lenovo System Update 5

    My Windows 7, SP1 was running fine, until I installed few updates on 10/15 using Lenovo System Update 5 then Windows Update stopped working, shows as RED:
    {CE3119AD-35EF-41CF-9C21-C7698FEB8393}    2013-10-14 21:53:00:256-0700    1    147    101    {00000000-0000-0000-0000-000000000000}    0    0    AutomaticUpdates    Success    Software Synchronization    Windows Update Client successfully detected 4 updates.
    {EB17A01A-EB6E-49FF-9EA2-AA0DD063B4B1}    2013-10-15 04:15:54:069-0700    1    162    101    {C61A0D00-3E51-48AC-B0AF-1D3E02B9E5D3}    201    0    AutomaticUpdates    Success    Content Download    Download succeeded.
    {77DAE88F-2795-4258-8BBF-8D27E53662CF}    2013-10-15 12:10:38:196-0700    1    193    102    {00000000-0000-0000-0000-000000000000}    0    0    AutomaticUpdates    Success    Content Install    Restart Required: To complete the installation of the following updates, the computer must be restarted. Until this computer has been restarted, Windows cannot search for or download new updates:  - Security Update for Windows 7 for x64-based Systems (KB2862330)
    {1398F777-3AEF-4D1D-BE4C-407EC4AEAD4C}    2013-10-15 12:15:25:676-0700    1    183    101    {C61A0D00-3E51-48AC-B0AF-1D3E02B9E5D3}    201    0    AutomaticUpdates    Success    Content Install    Installation Successful: Windows successfully installed the following update: Security Update for Windows 7 for x64-based Systems (KB2862330)
    {A220898A-E5FE-4FE7-8413-2B0C7B4013D0}    2013-10-15 12:15:25:766-0700    1    202    102    {00000000-0000-0000-0000-000000000000}    0    0    AutomaticUpdates    Success    Content Install    Reboot completed.
    {A5400FF2-33ED-4A47-8409-13E5DFE16A6D}    2013-10-15 19:29:31:486-0700    1    147    101    {00000000-0000-0000-0000-000000000000}    0    0    ChkWuDrv    Success    Software Synchronization    Windows Update Client successfully detected 0 updates.
    {43C533EE-775D-445E-A652-06648B72DE65}    2013-10-15 19:29:49:702-0700    1    147    101    {00000000-0000-0000-0000-000000000000}    0    0    ChkWuDrv    Success    Software Synchronization    Windows Update Client successfully detected 0 updates.
    {D6AAAFFB-7F18-4A7E-B39D-1BA09CDC5E6D}    2013-10-15 19:30:05:744-0700    1    147    101    {00000000-0000-0000-0000-000000000000}    0    0    AutomaticUpdates    Success    Software Synchronization    Windows Update Client successfully detected 3 updates.
    {4E73B1C1-5BA2-415D-AB34-92F7AB3DB418}    2013-10-15 19:30:08:753-0700    1    147    101    {00000000-0000-0000-0000-000000000000}    0    0    ChkWuDrv    Success    Software Synchronization    Windows Update Client successfully detected 0 updates.
    {51248882-41AC-4E59-B813-87AD326310AD}    2013-10-15 20:00:05:044-0700    1    183    101    {DBD3B4E9-0357-47DA-8317-D0CF2163BFE6}    501    0    wusa    Success    Content Install    Installation Successful: Windows successfully installed the following update: Hotfix for Windows (KB2661796)
    {FB2B8E5E-442C-4E76-B23D-6A41B4324C9D}    2013-10-16 00:11:39:832-0700    1    148    101    {00000000-0000-0000-0000-000000000000}    0    c8000247    AutomaticUpdates    Failure    Software Synchronization    Windows Update Client failed to detect with error 0xc8000247.
    Lenovo Thinkpad W500, Intel (R), Windows 7, SP1, latest updates as of Oct 15
    (1) Checked Setting,  set to automatic update whenever, even changed to never update, rebooted the OS and changed back to automatic update and rebooted the OS.
    (2) Stopped Windows Update Services, renamed SoftwareDistribution folder and started the window update services and rebooted.
    (3) Ran MS FIXIT
    (4) Ran System File checker Scan (sfc /scannow)
    (5) Ran CHKDSK /F
    (6) Installed "Intel Rapid Storage Technology" drivers from Lenovo site
    (7) Ran Update for Windows 7 for x64-based Systems (KB971033)
    None of the above possible recommended solutions were able to fix the issue yet and now I am getting a message your Window is Not Genuine!
    Any help or guidance is appreciated.
    Solved!
    Go to Solution.

    The Lenovo System Update installed the "Intel Matrix Storage Manager driver 8.9.2.1002" right before the Windows Upgrade got broken. So in the Device Manager under IDE ATA/ATAPI Controllers, I choose Intel ICH9M-E/M SATA AHCI Controller, on the Driver Tab, I choose the option "Roll Back Driver" and after rolling back the driver and restarting the OS, now Windows Update is working like a Champ!
    The End!

  • SharePoint 2013 site collection 'upgrade completed with errors'

    Hi All, 
    I am in process to upgrade SharePoint 2010 to SharePoint 2013 with all steps as mentioned in TechNet. 
    I was able to get all the SP2010 UI in SP2013 environment. However, when I navigated to top level site and clicked on “Site
    Collection health checks”. In SP2010 environment I never used (as Farm Admin) any Video content type. It belongs
    to out-of-the-box "digital asset content types" and cannot be deleted.
    Therefore I changed the name of Video to our department name like "Video - Company" and ran the site collection health check again. This time there was no conflict for content types. 
    After ran the site collection upgrade I got following error. 
    -------------------------------------------START------------------------------------------
    05/05/2014 14:34:28.66 OWSTIMER (0x1474)
    0x123C SharePoint Foundation Upgrade
    SPFeatureDefinition aj2bj
    ERROR Feature upgrade action 'AddContentTypeField' threw an exception upgrading Feature 'CTypes' (Id: 15/'695b6570-a48b-4a8e-8ea5-26ea7fc1d162') in Site 'http://sp13fe01-dev': Field type
    Rating is not installed properly. Go to the list settings page to delete this field.
    32d48d9c-70d4-f09a-6073-526808f844be
    05/05/2014 14:34:53.04 OWSTIMER (0x1474)
    0x123C SharePoint Foundation Upgrade
    SPSiteWssSequence2 ajy6m
    ERROR Feature upgrade incomplete for Feature 'CTypes' (Id: 15/'695b6570-a48b-4a8e-8ea5-26ea7fc1d162') in Site 'http://sp13fe01-dev'. Exception: Field type Rating is not installed properly. Go to the list settings
    page to delete this field. 32d48d9c-70d4-f09a-6073-526808f844be
    05/05/2014 15:18:43.95 OWSTIMER (0x1474)
    0x123C SharePoint Foundation Upgrade
    SPManager ajxoe
    ERROR RunUpgradeSiteSession [SPSite Url=http://sp13fe01-dev] failed.
    32d48d9c-70d4-f09a-6073-526808f844be
    05/05/2014 15:18:44.16 OWSTIMER (0x1474)
    0x123C SharePoint Foundation Upgrade
    SPManager ajxoe
    ERROR Exception: Upgrade completed with errors.  Review the upgrade log file located in C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS\SiteUpgrade-20140505-143330-61.log.  The
    number of errors and warnings is listed at the end of the upgrade log file.
    32d48d9c-70d4-f09a-6073-526808f844be
    05/05/2014 15:18:44.16 OWSTIMER (0x1474)
    0x123C SharePoint Foundation Upgrade
    SPManager ajxoe
    ERROR   at Microsoft.SharePoint.Upgrade.SPUpgradeSession.CheckPoint()     at Microsoft.SharePoint.Upgrade.SPUpgradeSession.LogEnd()     at Microsoft.SharePoint.Upgrade.SPManager.RunUpgradeSiteSessionCore(Object
    lockObject, SPSite site, SPUpgradeOperationFlags upgradeOperationFlags, Boolean checkConcurrentSiteUpgradeSessi
    32d48d9c-70d4-f09a-6073-526808f844be
    -----------------------------------END-------------------------------------
    Feature ID 695b6570-a48b-4a8e-8ea5-26ea7fc1d162 is Standard Content Type Definitions  https://social.technet.microsoft.com/wiki/contents/articles/7695.sharepoint-2010-list-of-features-id-displayname-and-scopes.aspx. 
    Any expert to solve the issue?? 
    Thank you. 
    regards, 
    Aroh Shukla

    Hi All and Inderjeet,
    Thanks for your reply and pointers. 
    I did follow the steps as mentioned in the links above. I used some third party solutions but not for any Video solution. I was able to successfully migrated the SP2010 (WSS_Content) to SP2013 (WSS_Content) environment a few weeks back with exactly same
    third party solutions and no site collection error:
    I renamed the default and out-of-the box video site content type as shown:
    I ran the "Site Collection Health Check" and did not receive any error as in my second screenshot. 
    But, after upgrade the Site Collection Upgrade and got the same errors. 
    I don't know if there is any SharePoint Server 2013 patch gave this error as I keep run the Windows Server 2012 (not running R2) and SharePoint Server 2013 regularly.  
    Can suggest how to resolve this error?
    Many Thanks!!
    --Aaroh 
    Aroh Shukla
    The same here. Opening a support ticket with MS.

  • Can not install this update for kb2667402 windows 7 professional. I tried various fix-it but it did not help Update KB2667402 failed with error 80004005

    I'm not sure where to turn now and am soooooooooo frustrated! I have been trying to get security update KB2667402 with error code 80004005 to install for a couple months without any success.
    So, I finally turned to microsoft tech support... Case# 1186572463
    On Fri. Oct. 26 I was on the phone with a microsoft tech for over 3 hours. The tech that took remote access of my computer said she did not know how to fix my problem and that my case would have to be escalated to a higher level and that I would
    receive a call back on Mon. Oct. 29th. However, I never got a return call.
    Yesterday - Tues. Oct. 30th I called in again and was on the phone for 4.5 hrs with a microsoft tech and he also took remote access of my computer but was not able to fix the problem. I asked to speak to someone at a higher tech level and was told to call
    back into the microsoft helpline.
    The 3rd call - Although I had been told during the prior 2 calls that I was still covered under my warrenty I was now told that I needed to pay for the support call. It took a while to get that straighteded out and to give all my information again to
    the call center but I finally worked with a 3rd tech for over 2 hrs. but had to terminate the call for a conference call I had with a client. The person I worked with said he would call me back between 7-8pmEST so he could continue helping me but I never
    got a return call.
    I have already invested over 10 hrs in the last few days regarding this issue and fear that if I call back in I will once again start over completely with no success which is why I am reaching out here. Is there anyone that has the knowledge of how to fix
    the problem?

    I've been having the same problem and today did some searching and found something that worked.  Check that the download hasn't already been installed - look in the Installed Updates listing for an entry.  If it exists there, uninstall it, and
    then force a Check For Updates and retry the install. This worked for me and I hope it helps.
    Good day, Chuck.

  • The report l runs very night and gets ended with error

    Dear all,
    I am facing a problem in solution manger. There is an report (Program/Command  RDSMOPSOL_MONIREFRESH ) will runs very night and get ended with error and there is Run-time error "MESSAGE_TYPE_X".
    Please suggest how to solve the problem.
    Is this report is necessary   for the system because it is not mention in the sap stand jobs.
    SM37 log
    Job started
    Step 001 started (program RDSMOPSOL_MONIREFRESH, variant &0000000000875, user ID BASIS)
    Opening and closing session started. Session SM2000000000065
    Opening and closing the session was successful. Session: SM2000000000065
    Opening and closing session started. Session SM2000000000005
    ABAP/4 processor: MESSAGE_TYPE_X
    Job cancelled
    SM:CSA SESSION REFRESH
    No. Program/Command       Prog. type Spool list Parameter      User  Lang.
    1  RDSMOPSOL_MONIREFRESH ABAP                  &0000000000876 BASIS EN
    Sm21 log
    00:00:50 DIA 00 000 SAPSYS            EEA OPERATION MODES: Switch to operation mode Normal triggered
    00:30:57 BTC 08 200 BASIS             R68 Perform rollback
    00:30:57 BTC 08 200 BASIS             AB0 Run-time error "MESSAGE_TYPE_X" occurred
    00:30:57 BTC 08 200 BASIS             AB1 > Short dump "081112 003057 sapsm BASIS " generated
    00:30:57 BTC 08 200 BASIS             D01 Transaction Canceled 00 671 ( MESSAGE_TYPE_X 20081112003057sapsm BASIS 2001 )
    00:30:57 BTC 08 200 BASIS             R68 Perform rollback
    00:30:57 BTC 08 200 BASIS             AB0 Run-time error "MESSAGE_TYPE_X" occurred
    Details
    Recording at local and central time........................ 12.11.2008 00:30:57
    Task................ 05312 . 08 B8 BTC background processor No. 08
    User................ BASIS
    Client.............. 200
    Terminal............
    Session............. 1
    Transaction code....
    Program name........
    Problem class....... T    Transaction Problem
    Development class... SABP
    Further details for this message type
    Module name......... abdynpro
    Line................ 1133
    Error text.......... ab_jmess
    Documentation for system log message AB 0 :
    The specified runtime error has occurred in the system.
    Parameter
      a.. MESSAGE_TYPE_X
    Technical details
    File................ 000048
    Position............ 0000253620
    Entry type.......... l      ( Error (Module, Row)            )
    Message ID.......... AB 0
    Variable parts...... ab_jmess                                            abdynpro1133
    Time     Ty. Nr Cl. User         Tcod MNo Text                                                                    Date : 12.11.08
    00:30:57 BTC 08 200 BASIS             AB1 > Short dump "081112 003057 sapsm BASIS " generated
    etails
    ecording at local and central time........................ 12.11.2008 00:30:57
    ask................ 05312 . 08 B8 BTC background processor No. 08
    ser................ BASIS
    lient.............. 200
    erminal............
    ession............. 1
    ransaction code....
    rogram name........
    roblem class....... K    SAP Web AS Problem
    evelopment class... SABP
    BAP Mini dump
    ate................ 20081112
    ime................ 003057
    ost................ sapsm
    ser................ BASIS
    ocumentation for system log message AB 1 :
    A short dump was generated for the specified program termination.
    You can analyze this short dump in the system log evaluation by
    selecting this line or evaluating Table SNAP (Transaction ST22).
    echnical details
    ile................ 000048
    osition............ 0000253800
    ntry type.......... s      ( ABAP Runtime Error             )
    essage ID.......... AB 1
    ariable parts...... 081112003057sapsm   BASIS
    Time     Ty. Nr Cl. User         Tcod MNo Text                                                                    Date : 12.11.08
    00:30:57 BTC 08 200 BASIS             D01 Transaction Canceled 00 671 ( MESSAGE_TYPE_X 20081112003057sapsm BASIS 2001 )
    Details
    Recording at local and central time........................ 12.11.2008 00:30:57
    Task................ 05312 . 08 B8 BTC background processor No. 08
    User................ BASIS
    Client.............. 200
    Terminal............
    Session............. 1
    Transaction code....
    Program name........
    Problem class....... K    SAP Web AS Problem
    Development class... SDYN
    Module name.........
    Location............
    T100................ 00                  671
    Parameters..........
    Documentation for system log message D0 1 :
    The transaction has been terminated.  This may be caused by a
    termination message from the application (MESSAGE Axxx) or by an
    error detected by the SAP System due to which it makes no sense to
    proceed with the transaction.  The actual reason for the termination
    is indicated by the T100 message and the parameters.
    Additional documentation for message 00                  671
    ABAP/4 processor: &
    No documentation exists for message 00671
    Parameter
      a.. MESSAGE_TYPE_X
    00:30:57 BTC 08 200 BASIS             R68 Perform rollback
    Details
    Recording at local and central time........................ 12.11.2008 00:30:57
    Task................ 05312 . 08 B8 BTC background processor No. 08
    User................ BASIS
    Client.............. 200
    Terminal............
    Session............. 1
    Transaction code....
    Program name........
    Problem class....... W    Warning
    Development class... STSK
    Further details for this message type
    Module name......... thxxhead
    Line................ 1240
    Error text..........
    Caller.............. ThIRoll
    Reason/called....... roll ba
    Documentation for system log message R6 8 :
    An error has causes an SAP rollback.  All database updates are reset.
    Technical details
    File................ 000048
    Position............ 0000254520
    Entry type.......... m      ( Error (Function,Module,Row)    )
    Message ID.......... R6 8
    Variable parts......                                       ThIRollroll bathxxhead1240
    Regards,
    Shiva

    Hi karteek,
    I have check there is Switch of operation mode but when I have checked the t-code sm63 there is no new mode are in normal mode.
    There is  one thing I want to ask dose this report (Program/Command RDSMOPSOL_MONIREFRESH )  run   in your system or any one server because I have think there is some problem in job shued
    and is also not mention in the sap stand jobs.
    there is an error in sm21 in job.
    BASIS        SM36 EFK BP_CHECK_REPORT_VALUES: Invalid program values found. Reason:
    BASIS        SM36 EFC > Program RDSMOPSOL_MONIREFRESH has no variants, but a variant was specified
    Is this SM37 log
    Job started
    Step 001 started (program RDSMOPSOL_MONIREFRESH, variant &0000000000875, user ID BASIS)
    Opening and closing session started. Session SM2000000000065
    Opening and closing the session was successful. Session: SM2000000000065
    Opening and closing session started. Session SM2000000000005
    ABAP/4 processor: MESSAGE_TYPE_X
    Job cancelled
    Sm21 log
    SAPSYS            EEA OPERATION MODES: Switch to operation mode Normal triggered
    BASIS             R68 Perform rollback
    BASIS             AB0 Run-time error "MESSAGE_TYPE_X" occurred
    BASIS             AB1 > Short dump "081111 003056 sapsm BASIS " generated
    BASIS             D01 Transaction Canceled 00 671 ( MESSAGE_TYPE_X 20081111003056sapsm BASIS 2001 )
    BASIS             R68 Perform rollback
    BASIS             R49 Communication error, CPIC return code 017, SAP return code 223
    BASIS             R64 > CPI-C function: CMINIT(SAP)
    *BASIS        SM36 EFK BP_CHECK_REPORT_VALUES: Invalid program values found. Reason:*
    *BASIS        SM36 EFC > Program RDSMOPSOL_MONIREFRESH has no variants, but a variant was*
    specified
    BASIS             R68 Perform rollback
    BASIS             AB0 Run-time error "MESSAGE_TYPE_X" occurred
    BASIS             AB1 > Short dump "081111 220948 sapsm BASIS " generated
    BASIS             D01 Transaction Canceled 00 671 ( MESSAGE_TYPE_X 20081111220948sapsm BASIS 2001 )
    Details Page 2 Line 6 System Log: Local Analysis of sapsm                     1
    Time     Ty. Nr Cl. User         Tcod MNo Text
    00:00:51 DIA 00 000 SAPSYS            EEA OPERATION MODES: Switch to operation mode Normal triggered
    Details
    Recording at local and central time........................ 13.11.2008 00:00:51
    Task................ 04100 . 00 D0 Dialog work process No. 00
    User................ SAPSYS
    Client.............. 000
    Terminal............
    Session............. 1
    Transaction code....
    Program name........
    Problem class....... S    Operation Trace
    Development class... SBTC
    Sm63
      Start/end time   Name of the active operation mode
       00.00 - 01.00    Normal
       01.00 - 02.00    Normal
       02.00 - 03.00    Normal
       03.00 - 04.00    Normal
       04.00 - 05.00    Normal
       05.00 - 06.00    Normal
       06.00 - 07.00    Normal
       07.00 - 08.00    Normal
       08.00 - 09.00    Normal
       09.00 - 10.00    Normal
       10.00 - 11.00    Normal
       11.00 - 12.00    Normal
       12.00 - 13.00    Normal
       13.00 - 14.00    Normal
       14.00 - 15.00    Normal
       15.00 - 16.00    Normal
       16.00 - 17.00    Normal
       17.00 - 18.00    Normal
       18.00 - 19.00    Normal
       19.00 - 20.00    Normal
       20.00 - 21.00    Normal
       21.00 - 22.00    Normal
       22.00 - 23.00    Normal
       23.00 - 00.00    Normal
    Regards,

Maybe you are looking for

  • Open and edit animated .gif while preserving frame timing

    CS4 Premium Design Edition, Win XP I was disappointed with the removal of Image Ready from CS3 because although some of the functionality was placed into Photoshop 10, there was no way to open and edit an existing animated .gif while preserving the t

  • Macbook screen blacking out suddenly

    Hi all, While using my Macbook, the screen suddenly goes black. The screen goes black apparently randomly, sometimes it does, sometimes it does not. My Macbook is on my table, which I guess is pretty well ventilated too. After pressing the spacebar a

  • VLC audio problems on T400 - DPC Latency Issue?

    Hi Folks, When I try to use VLC player to play any video on my T400, I get audio stutters and other strange effects.  I'm wondering if it might have to do with all the audio DPC Latency issues this model has had.  Does anyone else have these issues? 

  • HT4847 I want to clear out my icloud.

    I want to clear my icould, I'm not sure if I have done it correcty. I went to icloud.com and reset my documents and data. Did I do this right? Is there anything else I should do?

  • Trouble Updating iPod! HELP!!!

    Ok, so when i plugged my ipod into my usb port..itunes came up..and displayed the ipod under devices...but when it was updating..it doesnt show the songs that are being put on the ipod..and then itll freeze up and send and error report. Is there anyt