Cell definations in reporting?

really we use cell definations in reporting in real time.
Thanking u
suneel.

Hi ,
Yes its required for some situations.
But you must have two structures in column and row then only u can use this option.
You have to use this some scenarios for example you are displaying time periods like Q1, Q2, Q3 & Q4 and Total in rows and amount values , percentage in column.
In this situation in order to show the total u can sum Q1Q2Q3+Q4 values but percentage u cannot some, so u have to use cell defination where u can calculate percentage using restricted key fig you can select and show this by using cell defination.
Assign points pls.........
Best Regards,
SG

Similar Messages

Cell Document in Reporting Studio

i saw from the user manaul that there is Cell Document in Hyperion Reporting Studio, can anyone give me some example of how it works. my assumption is that if you want to attach your comments/graphs to the end of the report, you can attach their harddrive path through Cell Document when you create a report,then when the report is run, it's content and comments/graphs will come as one in PDF view. However in the manual there is little information about Cell Document, so i need your help on this.
thank you
------ Wei Jin

Hi ,
Yes its required for some situations.
But you must have two structures in column and row then only u can use this option.
You have to use this some scenarios for example you are displaying time periods like Q1, Q2, Q3 & Q4 and Total in rows and amount values , percentage in column.
In this situation in order to show the total u can sum Q1Q2Q3+Q4 values but percentage u cannot some, so u have to use cell defination where u can calculate percentage using restricted key fig you can select and show this by using cell defination.
Assign points pls.........
Best Regards,
SG

Cell defination

Hello,
Pls let me know wheather the extensive use of cell defination in sap bw will haper the query performance while executing the report.
Regards

Hi KK,
When you are creating a new selection in cell definitions during the OLAP processing, a new sub query is spun off from the main query. That means if you have 50 cell definitions in the query, 50 subqueries will be generated from the main query. And the data volume that the queries need to handle is huge in size, it is definitely going to tamper the performance.
So it is better to avoid cell definitions if you have another option and the data volume is high.
Regards,
BIJESH

Cell definition in Report Painter

Dear All,
I am looking for some documentation or any other sort of help regarding the cell definition in Report Painter reports.
Regards
Shirazi

<a href="http://help.sap.com/saphelp_47x200/helpdata/en/46/1a1c3ac9fb1d75e10000000a114084/content.htm">SAP documentation</a>

Double click on cell in alv report

Hi all,
I want to show detail popup on cell of alv report. how to get the cell value.
plz tell me the logic for getting cell value.
thanks in advance.

Hi,
IF RS_SELFIELD-FIELDNAME = 'EBELN1'.
* Read data table, using index of row user clicked on
READ TABLE IT_EKKO INTO WA_EKKO INDEX RS_SELFIELD-TABINDEX.
Please remember the field EBELN1 should be in IT_EKKO. after the read statement you can move which ever field you want to another for further processing
like
READ TABLE IT_EKKO INTO WA_EKKO INDEX RS_SELFIELD-TABINDEX.
if sy-subrc eq 0.
move it_ekkp-( your field name) to v_field
endif.
a®

Hiding the blank cells in Webi report - BO 4.0

Hi,
I have created a webi report in which i have used different types of blocks
1) Form table
2) Verticle table
3) Horizontal table.
so now in real time there chances that some of the blocks will not have any data.(i.e it displays blank cell) in the report.
so now i have to hide only the blank cells and not the table headers.that means though the cells are blank i have to display headers.
what formatting changes i need to achieve this in Webi Report.
If anybody does this please let me know the step by step logic in detail.
Thanks in advance.
Regards,
Naga Nanda Kishore.

Hi,
We cannot hide specifc cells in WebI, however we can choose to whether to display or not empty measure values and empty dimension value.
So you need to select the desired block-> Right Click and Select Format Table-> Uncheck Show rows with empty dimension values or Show rows with empty measure values whichever is required to be hidden.
Hope this helps.
Regards,
Manpreet

Problem defining a report to show in Reports tab of plug-in home page

We are developing a plug-in for OEM and we want to add some SYSTEM reports that will be showing in Reports tab of plug-in home page.
We tried to use the PL/SQL code described in Extensibility Guide, copied the code used in some existing plug-in that we downloaded from Oracle site, but it does not work. When executing the code we receiving "PL/SQL procedure successfully completed" message, but report does not show neither in Reports list nor in Home page (reports tab does not exist).
Finally we tried to add a report containing only static text component, but with same result.
Following is the code that is executed:
DECLARE
l_target_types MGMT_IP_TARGET_TYPES;
l_param_values MGMT_IP_PARAM_VALUE_LIST;
l_target_type MGMT_IP_TARGET_TYPES;
l_report_guid RAW(16);
l_element_guid RAW(16);
l_report_title_nlsid VARCHAR2(128);
l_report_owner VARCHAR(100);
l_curr_order NUMBER;
l_curr_row NUMBER;
BEGIN
-- specify the target type associated with this report
l_target_type := MGMT_IP_TARGET_TYPES();
l_target_type.extend(1);
l_target_type(1) := 'test_plugin_57';
l_report_title_nlsid := 'Status 57_4';
l_report_owner := mgmt_user.get_repository_owner;
-- create a report definition for the report
l_report_guid := mgmt_ip.create_report_definition (
p_title_nlsid => l_report_title_nlsid,
p_description_nlsid => 'TODO: description here',
p_owner => l_report_owner,
p_category_nlsid => 'Monitoring',
p_sub_category_nlsid => 'Hardware',
p_late_binding_target_types => l_target_type,
p_late_binding_multi_targets => 0,
p_show_table_of_contents => 1,
p_system_report => 1,
p_component_name => l_target_type(1)
-- Add report so that it shows up under "reports" tab in default home page
mgmt_mp_homepage.add_report (
p_target_type => l_target_type(1),
p_report_title => l_report_title_nlsid,
p_report_owner => l_report_owner,
p_report_order => 1
-- Text
l_param_values := MGMT_IP_PARAM_VALUE_LIST();
l_param_values.extend(2);
l_param_values(1) := MGMT_IP_PARAM_VALUE_RECORD(
'oracle.sysman.eml.ip.render.elem.TextParamBean.textMessage',
'This page shows the reports related to TBD.');
l_param_values(2) := MGMT_IP_PARAM_VALUE_RECORD(
'oracle.sysman.eml.ip.render.elem.TextParamBean.textStyle',
'OraTipText');
l_curr_order := 1;
l_curr_row := 1;
l_element_guid := mgmt_ip.add_element_to_report_def (
p_report_guid => l_report_guid,
p_element_name_nlsid => 'IPMSG_STYLED_TEXT',
p_element_type_nlsid => 'IPMSG_ANY_TARGET_TYPE',
p_header_nlslid => null,
p_element_order => l_curr_order,
p_element_row => l_curr_row,
p_parameters => l_param_values,
p_targets => null
END;
/

Have you tried running your sql file in sql plus? Does that work? If it does execute, does the report show on the main tab but not on the target homepage or does it show in neither spot? Try hitting the refresh icon in the page to reset the cache on the Reports tab.
When you deploy the plug-in with the report file in it, did you see any errors or messages in the oms logs?
1. We do: run the PL/SQL script I posted from sqlPlus. As far as I understand it should add a report?
2. We tried all the ways of defining a report. We successfully create the report interactively with SQLs we defined. We tried to put the PL/SQL code inside the jar and deploy, to run the PL/SQL script in SQL Plus, neither report is showed in Reports list nor Reports tab is showing at all. We tried to restart OEM and computer after adding a report, it does not help...
Regarding the oms logs - where can we see that?

Cell formulas stop reporting correct values. Numbers 3.5.

10.10
Numbers 3.5
In the same table:
I have a cell (say #1) with a number value entered say 10.40.
I have another cell (say cell #2) that is set to equal that cell's value.
This works and cell 2 reports the correct value of cell 1.
But once every 10 or so restarts cell 2 stops reporting cell 1's value correctly.
It reports the previous value after I change Cell 1's value.
Sometimes deleting cell 2's reference and re-entering it works.
Other times it just continues to report cell 1's previous value.
Getting cell 2 to report the current value of cell 1 can be a chore.
Other cells on the same sheet with more complicated formulas also stop reporting the correct values.
Many references are for cells in other tables on the same sheet.
I can spend 30-45 minutes correcting the mess every 10 or so restarts.
Anyone else have this issue?
Any suggestions welcome.
Thanks ... Ken

Nothing like that here. Have you tried deleting Numbers 3.5 (go to LaunchPad, hold down the mouse button until the icons quiver, and click the x by the Numbers icon) and re-downloading from the Mac App Store? Also have you tried shutting down and restarting your Mac?
SG

Append table with multi-line cells to word report

Hi,
I am using LabView 7.0. I need to append table to word report and I am using Append Table to Report VI. My VI works fine as long as the table cells do not have multiple lines. For multiple lines, each line is put is a seperate cell in the word report.
Is there a way to append multi-line cells to Word Report??? If not, any suggestions on how I can copy the multi-line table to Word report???
Please kindly help!!
Please see the attached document for details on the problem.
Thanks,
Mim
Attachments:
Table with multiple line cells.doc ‏33 KB

Hi Mim,
Yes I understood the multiple-lines part. I think the doc is the report you want. Correct ?
The doc is generated with your VI without any modifications.
I am using XP, Office 2002 SP3 and LV7.1
Attachments:
Verification Report.doc ‏39 KB

How to add the new character in FDI1FDI2 Define/Change Reports?

Hi,
There are some fixed charcters defined in the T. Codes FDI1FDI2 Define/Change Reports, can we add the characters here based on which we can get teh desired output. If yes, hen please tell me how to add the characters?
Thanks in advance...
Regards
Nitin

thanks

Remove blank cell in Webi Report

Hi Guys,
I have one simple ques. how to delete or remove blank cell from Webi Report.
Regards,
Manoj

Mr Manoj,
We assume that one posts questions that are difficult to find and a little patience in waiting for replies.
Please see the [Rules of Engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement] page for additional information.
The product guides can be found here, [http://help.sap.com/businessobject/product_guides] please select and download the guide you need.
Thank you!
Simone Caneparo
Forum Moderator

Fill cell color in report - the entire cell?

Hi all,
Apologies to ask for something that has already been touched on.
https://forums.oracle.com/message/843430#843430
This solution was great to read. It colors the text background in a cell, in a report, depending on the data within. This is almost, but not quite coloring the entire cell.
I have been trying for a while but at this point can I put it to the brains trust? (ie you)
In old school language, what I'm after is
<TABLE border=1 bgcolor=#FFFFFF>
<TR>
<TD>my first table</TD>
<TD bgcolor=#00FF00>my first table</TD>
</TR>
</TABLE>
...which colors one entire cell, rather than just the white behind the text.
FYI, I would then go to make this conditional depending on the data in the cell - Effectively becoming the Excel stype Conditional formatting.
Thanks.
NT

Hi,
This might help
Read Article - APEX 4 color classic report single column cells
Regards,
Jari
My Blog: http://dbswh.webhop.net/dbswh/f?p=BLOG:HOME:0
Twitter: http://www.twitter.com/jariolai

Where define a report does not go directly to printer ?

Hi
I have a program wich generates a report list in screen. When this program is executed in job (batch) for one user, the report is automaticaly sended to printer.
Where is this configured ? If the user has a configuration so his reports are automaticaly printed ; is there a way in the program to define the report does not be sended to the printer until the user manually send it ?
Thanks a lot.
Frank

Hi,
In the user settings he might have configured to have output immediately..
in the menu ...System -> user profile -> own data..
In the Defaults tab in the output controller section...you have a check box which says output immediately..
Please check the same in that user if the output immediately is set..
THanks
Naren

Can i merge two cell in BO Reports?

Hi!
I'm new to this BO. I've already posted my problem in some other place in this forum. Now, I think that may be a wrong place to post.
So, i'm posting this problem once more here.
I'm giving you that link which i've already posted (Otherwise it will be duplicate thing to post the entire content) ->
[Can i merge two cell in BO Reports?|Can i merge two cell in BO Reports?;
Sorry for this initial mess.
Waiting for your feedback.
Regards.
Satyaki De.

Thanks for your reply.
But, my requirement is slightly different than what you have shown.
I've created two reports say report 1 & report 2. And, it should looks like this ->
Report 1,
YEAR QT         P1         P2
2001 Q1                    25
2002 Q2         13         14
Report 2,
YEAR QT         P1         P2
2001 Q1          7         12
2002 Q2         10
And, my required final output should be ->
YEAR QT         P1         P2
2001 Q1          7         37
2002 Q2         23         14
So, as you can see - i'm merging and adding the values of two reports into one.
I'm using Oracle 10g as my DB. Is it possible that i can write some SQL query any where in any place of the reports that can do this staff. Then i can go for that kind of solution, too.
But, in that case i need to know where to write the query. Please reply.
But, first -> Is it at all possible in BO?
Thanks again for your valuable time to read this post.
Regards.
Satyaki De.

Defining a report server in forms

Hi,
I'm trying to integrate Oracle Forms and Reports 9i.
When I do this using a report server as an operating system process it works fine, however, when I try to do this using the J2EE servlet I doesn't seem to work.
When I define the reports server in forms, i was previsouly using the name of the service, ie. localrepserver. However, I'm a bit confused as to what to set when using a servlet.
I've tried using the URL http://localhost:8888/reports/rwservlet
any idea's?
Thanks guys

Am I right in thinking that there are two forms of reports servers, an operating system service (rwserver -install [report_server_name]) and a J2EE servlet (http://localhost:8888/reports/rwserver)?
I'm basically trying to use oracle forms to generate and display a html report, from a .rdf file.
The sciprt i'm using to do this is as follows,
DECLARE
rep_result VARCHAR2(30);
BEGIN
SET_REPORT_OBJECT_PROPERTY('sample', REPORT_FILENAME, :GLOBAL.project_path || 'sample.rdf');
SET_REPORT_OBJECT_PROPERTY('sample', REPORT_DESNAME, :GLOBAL.project_path || 'sample.htm');
rep_result := RUN_REPORT_OBJECT('sample');
WEB.SHOW_DOCUMENT('file:///' || :GLOBAL.project_path || 'sample.htm', '_blank');
END;
In the forms property palette, there are various properties you need to define, one being the 'report server name'.
Previously, i used an operating system service as the reports server. I called this 'localrepserver'. Therefore, it was easy enough to define in the property palette. However, i'm trying do this using a servlet method. Here, i'm unsure as to what to define in the 'server' field of the property palette.
Hope this makes sense.
Cheers,
Nick

Cell definations in reporting?

Similar Messages

Maybe you are looking for