Central Autoreaction method won't assign to remote system

When I assign a remote autoreaction method to my CRM systems in rz21 it won't show in method alloctaion. I get no errors. It shows the assignment as being created but when I got to rz20 and display the node and do a - view - method allocation the autoreaction method is not assigned. When I look at properties for the method it takes me to the remote system but again doesn't show the autoreaction method assignment. I checked that the systems are online in rz21 display remote systems.
My ecc systems are working just fine.
Any ideas?
Thanks,
Dan

Hi Dan,
Try checking in RZ21 that any agents for the satellite system are online as they should be.
In RZ20 SAP CCMS Technical Expert Monitors - Selfmoniring CCMS Agents, the same agents should also show as 100% Available. There may also be errors in the agent log (sapccm4x.log).
These SAP notes are also worth a look:
429265 - CCMS monitor architecture: Central auto-reaction
939616 - CCMS auto-reactions: Help with troubleshooting
Regards,
Brendan

Similar Messages

Assigning Central Autoreaction methods

Hi all,
I am having an issue in the Assignment of Central Autoreaction methods. I have installed CCMS agents on XI systems keeping Solution Manager as the central monitoring system.
In the satellite system --> RZ20 --> All systems monitoring segments . I am getting two nodes
1. HOSTNAME_SID_INSTANCE_no
2. HOSTNAME_SID_INSTANCE_no_X
In the first one all monitors are coming, but if I choose a monitor from the first one, the central autoreaction methods are not getting assigned
For the second one central autoreaction methods are getting assigned and it is working fine also.But not all monitors available.
Actaully in that Satellite system, there is only one instance HOSTNAME_SID_INSTANCE_no.
Please provide your ideas
regards
Naveen

Hai,
The HOSTNAME_SID_INSTANCE_no_X MTE is due to the SAPCCMSR agent for the JAVA part.
Since your satellite system is XI it will be having JAVA stack, and hence the second MTE.
You can create your own MTE's in CEN and try to assign Central auto reaction methods from there.
Regards,
Yoganand.V

Central Autoreaction Method doesn't work for NW 7.10 in SolMan 7.01

Hello!
The central autoreaction method doesn't work for the satellite system
NW 7.10. For systems with kernel releases 4.6D, 640, 700 this method
works fine and e-mail alerts are coming.
The configuration steps I've checked:
1. Configured SCOT. The mail_send job executes every 5 minutes.
2. Background dispatching job is released: SAP_CCMS_MONI_BATCH_DP (In
central CEN/000/DDIC and satellite system SAT/000/DDIC)
3. Central dispatching job is released: SAP_CCMS_CENSYS_DISPATCHER
(Only in central system CEN/000/DDIC)
4. The sapccm4x-agent registered as web service within CEN using
Create Remote Monitoring for NW 7.10:
Connection test to SAPCCM4X.<satellite_host>.00 was performed successfully
5. Created a new autoreaction method by copying method
CCMS_OnAlert_Email_V2 to the own Z_CCMS_Email_Alert_CEN:
Function Module - SALO_EMAIL_IN_CASE_OF_ALERT_V2
Execute Method on Any Server and Only in Central System, triggered by
CCMS agents
SENDER (EMAIL_USER) exists in CEN/000 , RECEPIENT - <distr list
SAP_BASIS in CEN/000>, RECIPIENT-TYPEID - C
6. Got MTE Classes from NW 7.10 satellite system and assigned this method
Z_CCMS_Email_Alert_CEN to an MTE-class CCMS_ORAucPSAPSR3 for NW 7.10
satellite system. The alert is red right now.
7. The mail_send job doesn't send anything, in SCOT there are no
sending orders.
8. Autoreaction status on this alert in CEN in RZ20 - Sent to CEN.
CEN_CHECKED.
9. The alert status in RZ20 in CEN - ACTION_REQUIRED. If I execute it
in manual the alert status changes to ACTIVE, but no email and no
messages in sending orders in SCOT.
Please help me to solve this issue.
Thank you!

Hi,
Since you are using RECIPIENT-TYPEID =C i.e. General distribution list, pls ensure to have shared type of list created in SBWP.
Also pls verify your SCOT configutaion , if apropriate address area i.e. *@abc.com
Also one point to note that even if you trigger auto reaction method manually via RZ20 , pls check if alert is listed in SOST.
if yes , that means there is problem in either SCOT configuration or distribution list.
If alert is not appearing in SOST , that means you need to check auto reaction method parameters;
Z_CCMS_OnAlert_Email_V2 , here check release section if Auto reaction execution method is checked.
Regards,
Rupali

Solman 7.1 - Monitoring CCMS RZ20 Central Autoreaction Method

Hello,
I'm trying to configure Solution Manager 7.1 for using CCMS.
With new solution manager the connection of systems through SMSY is no longer possible. Aside from that I didn't found a possiblity to assign RFC Destinations for System Monitoring.
I found out that I can connect systems through RZ21 - Menu configure central system - create remote monitoring entry.
Systems appear in RZ20 and I can use them in monitor sets.
In old solution manager I used central autoreaction methods. Only Solman sends alert messages. Mailconfiguration on each systems wasn't necessary.
If I now try to assign central reaction method through RZ21 - configure central system - assign central autoreaction method systems asks me for CCMS Agents. Elsewhere I read CCMS Agents are no longer needed with Solman 7.1.
So, how can I use central reaction methods in Solution Manager 7.1 without CCMS Agents?
Regards,
Julia

You can use SAPHOSTAGENT for central monitoring .
Refer the links
http://scn.sap.com/thread/3148685
http://help.sap.com/saphelp_nw73/helpdata/en/44/86b3b2cc8812d2e10000000a422035/content.htm
Regards
Ratnajit

Read and Write file in Remote system Drive

Hi all,
I am try to create the file in Remote system,
in example i find the method to create file in remote system , ie //computer_name/Share_name/fileName
the above sample , i know the computer name but i dont know Share name of the computer ,
Its any possible to find the share name in java ?
please give some idea to solve my problem ?
With Regards,
Ganesh Kumar.L

tlgkumar wrote:
in example i find the method to create file in remote system , ie //computer_name/Share_name/fileName
the above sample , i know the computer name but i dont know Share name of the computer ,
Its any possible to find the share name in java ?Sure. Ask the person who is writing the requirements which share you should use. Don't settle for incomplete requirements.

Central autoreactions for remote systems (saprouter)

Hi, Experts!
There is a possibility to define the central autoreactions for remote systems connected to Solman through SAPRouter??

Hi,
The CEN Configuration is dependant on the CCMS agents that you install on your satellite system.
The CCMS agents run as Services at OS level.
When you install CCMS Agent, there will be parameters pertaining to connecting to CEN.
Hope this solves your problem.
Feel free to revert back.
-=-Ragu

How to assign OIM Remote Manager as a service on Win 2003 ?

I want to assign OIM Remote Manager as a service on Win 2003. I've used instsrv.exe to install srvany.exe and configured Parameters-Application, Parameters-AppDirectory and Parameters-AppParameters string values using parameters from remotemanager.bat file. I've obviously make same configuration mistakes because when I try to start service which I create, I can't see any new java application and Remote Manager log stays calm.
Would you please give me advices how to configure Windows registry to start Remote Manager as a service.
Regards
VeePee

Hi folks,
I am a little bit confused about this.
The metalink note explains how to convert remote manager to a windows service using the java service wrapper (and noted that this approach applies to version 9.0.1)
It is explicitly declared that OIM’s Remote Manager can run as a Windows Service in OIM 9.1 datasheet (see: http://www.oracle.com/global/kr/download/pdf/ofm/OIM_DATASHEET.PDF) but admin/install guides does not include any configuration guidance about how to do it.
Is there an easier way for v 9.1 to install remote manager as a service or do we use Java Service Wrapper method for this version also ??
cheers
// gurol
Edited by: Gurol Erdogan on Dec 13, 2008 11:16 AM

Remote system monitoring entry- data not relayed to Central system

Hello Folks,
I am trying to establish a central monitoring system for our client. I am trying to test it in the DEV environment first.
The central system is a Solution manager system (Dual stack- ABAPJAVA). I am trying to bring in monitoring data from the ECC development environment (ABAPJAVA).
First of, i created to RFC connections in Solution manager system, one for data collection and the other for analysis. I have maintained the host address of the ECC system as target.
Then i have created a remote system entry in Transaction RZ21--> technical infrastructure entered the 2 RFC names and have executed the function.
At this point i am only trying to bring in ABAP stack monitoring data form the ECC system so i have not generated the CSNCONF file.
Now when i look in Solution manager RZ20-->CCMS monitoring templates, i can't see any data for the the ECC system.
I guess i am doing something wrong. Am i looking in the wrong monitor set?
As additional information: Solution manager (SMD) and ECC (ECD) use different transport domains / transport groups. I dont know if this makes a difference.
Can some one please help.
Regards,
Prashant

Hi Prashant,
if I understand correctly your system shows only MTEs from R/3 Stack, not from the OS side, pls check your SAPOSCOL. Are the data in OS06 in your remote system correct and do you see the current data, refredhed all 10 seconds?
To check your environment, pls do the following:
in th efirst step check in RZ21 > in the Topology part the System Overview for your system connection to your back end system. Are the Read Destination Data RFC and the Destination Analysis RFC correct and works the authority chek fine?
In the second step pls check in RZ21 > in the Agents for Remotey SAP Systems part; are there registered your remote ccms agents correctly and works the connection test.
Stop the agents and in your RZ20 monitor pls enter STAT in your command field. Are there displayed for your MTE nodes the read RFC destinations?
Start the agents and and in your RZ20 monitor pls enter STAT in your command field. Are there displayed for your MTE nodes the CCMS Agent RFC destinations?
To rebuild the Monitor in the CEN system you could try to reset the node of your remote system in the warm up status > go in the remote system to RZ1 > go to local segments > change to edit > select your segments > reset segment in "WARMUP" status.
In the CEN system you coul try to go to the edit mode for the Agents for Remot SAP Systems > select your remote system and push the button Reinitialize Agents
In the back end system you can try to delete all MTEs in RZ21 > menu Technical Infrastructure > Reorgenize Segment Table > select the options with "ALL" in the CEN and the remote system to reorgenize all data.
Could you pls post for the missing MTEs a screenshot on the one side from the CEN system and on the other side from the remote system...
and last but not least you could try the following for missing OS MTEs
delete ALALERTS, ALMTTREE and ALPERFHI in /usr/sap/ccms/<SID>_<SNR> and check in the agents folder all trace and log files for errors.

Flash content (embedded using SWFObject or using other methods) won't print

All Flash content embedded using SWFObject or using other methods won't print anymore, since version 3.6.4.
There is a blank square on the printed page instead of the object.
There was no trouble with previous firefox version.
I've got the issue with version 3.6.4, 3.6.6 & 3.6.7
I'm using Adobe flash player version 10,1,53,64 ; I've tried to downgrade to Adobe flash player version 9, I'd got the same issue.
I've tried from multiple computer and still had the same blank square.
Thanks for your help !
== URL of affected sites ==
http://www.bobbyvandersluis.com/swfobject/testsuite_2_2/test.html

Having the same problem with our flash based design tool. For now we're recommending that our users use IE as it prints the flash objects fine. Would prefer to use Firefox, but that won't be an option until flash objects can be printed again (as they used to be).
example:
[http://webblox.libertycable.com/print_fl.asp?partid=202531&checksum=5523020.37&rand=728201062255PM]

Files won't save to remote in CS4.

I started this website in CS3 and right before my upgrade, the "Save to Remote" stopped saving. I have upgraded to CS4 and still on this one website, I can not "Save to Remote". Nothing changes on the remote end after my save.
Any ideas on what to check out?
I created a new site and started from scratch copying the files from the remote to my new local folder and still it won't save to remote. Not sure what to check but there must be a setting wrong somewhere.
Thanks.

You may want to look at the dates and times for both the files on your computer and those on your server. They should be the same but for some reason the ones on the server are not being updated. After identifying the ones that are "out of sync" then deleted the old ones from your server manually and "put" the ones on your computer. try with one file first.
Hope it helps
Patrick

Scutil won't assign a variable

I am writting a script that assigns the computername if it doesn't exist.
#!/bin/bash
COMPNAME=$(/usr/sbin/scutil --get ComputerName)
if [ $COMPNAME == "ComputerName: not set" ]
then
/usr/sbin/scutil --set ComputerName "MAC-NEW"
fi
Problem is, the command "COMPNAME=$(/usr/sbin/scutil --get ComputerName)" will print out the result to screen but won't assign it to a variable. I also tried redirecting it to a text file, it also only printed to the screen.
Any ideas?

It appears that if the variable is not set, then it outputs ComputerName: not set. However, since it is not set it actually returns nothing or an empty string.
If the property is set, then then COMPNAME=$(/usr/sbin/scutil --get ComputerName) will behave as expected.

Airport Extreme won't assign an IP address to OS 9.2.2

Is there a reason why my Airport Extreme won't assign an IP address using DHCP to a PowerMac G4 Quicksilver running Mac OS 9.2.2? The OS X partition running Tiger works fine.

I finally found that if I put and old dual-speed Netgear hub between the Airport Extreme router and the PM G4 Quicksilver running OS 9.2.2 everything works fine. Go figure!
Maybe one of the Mac gurus out there can tell me why this worked.

Assign records to different remote systems in MDM

Hello Experts,
I am using qualified range to generate internal number range for vendor. The remote key & remote system details for the records are generated during syndication. My scenario is that I have couple of records in MDM for different remote systems. I want to syndicate it to the respective systems. Is there a way to identify the respective records per system with out inserting the details in "edit key mapping".
If we try specifying Remote system details in edit key mappings with a blank or specific Key value , then the qulaified number generated for vendors is overwritten with this key value mentioned in key mapping.
I need to retain both the qualified range functionality as well as tag the records to different remote systems.
Kindly advice.
Thanks and Regards,
Elizabeth.

Hi Shiv
So, i am not sure, but this all makes me feel that syndication tasks can not be executed parallel.
Your understanding here is correct since we are using here the same table for syndication process so it will be executed in steps. I mean syndication 2 has to wait until the syndication 1 ends. But the thing is that even after syndication 1 completes syndication 2 is not going to place that's the issue here.
Please find solution which tells same thing in MDM import manager context.
Can I run two Import Managers at the same time?
Yes, several instances of the Import Manager can be open concurrently. The only existing limitation though is when actual importing process starts the tables involved in the importing process are locked for write access. So if two instances of the Import Manager import to different tables then no synchronization issue occurs. If they use the same table, then the instance getting access second has to wait until the first ends.
For more details, Please refer this below link:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/7dc6ba86-0501-0010-0b82-849437929f0d?quicklink=index&overridelayout=true
@ Elizabeth: After Syndication 1, Have you checked after sometime whether syndication2 & so-on takes place or not. I feel that Syndication for syndication 2 , syndication 3 & syndication 4 should also occur after some time as they executed one by one not parallel so will take some time. Just check and revert with result whether your workflow gets completed after some time or not.
Note: Make sure that for all these Syndications outbound ports Processing Type = Manual in Console else syndication will not occur.
Regards,
Mandeep Saini

"Program terminated in remote system NONE: Logon failed" when adding a new table

Hello,
I set up a replication flow from a SAP ERP 6.0 EHP7 with SAP ASE 16.0 source to SAP HANA 1.0 rev 82 target
I am using a standalone SLT system NetWeaver 7.0 with DMIS 2011_1_731 (with SP 1 to 7).
I have 100 tables to replicate.
I succeeded to set up replication for 57 tables. These tables are replicating properly.
Whenever I try to add a new one (with LTRC transaction, Data Provisioning -> Start Replication), the new table is marked as 'Failed' after a little while.
When I press 'Show Error Log' button I got an obscure error message:
"Program terminated in remote system NONE: Logon failed "
I do not understand this message. I checked both on SAP ASE source and SAP HANA target. I am still able to connect against both source and target.
Can you please tell how to troubleshoot this error.
Thanks in advance,
Christian

First thank you for answering my questions. I really appreciate your answers.
I rechecked the documentation.
"Application Operations Guide SAP Landscape Transformation Replication Server Document Version: 2.3 – 2014-07-08"
Page 29 - 30
3.5.2.2 Data Transfer Jobs
This section explains the relationship between the number of data transfer jobs and the number of available background work process.
Data transfer and data transformation processing on SLT server system is accomplished by the background work processes of the underlying SAP NetWeaver ABAP application server. Each job occupies 1 background work process in the SAP LT Replication Server system. For each configuration, the parameter Data Transfer Jobs restricts the maximum number of data load job for each mass transfer ID (MT_ID). In total, a mass transfer ID (MT_ID) requires at least 4 background jobs to be available:
 One monitoring job (master job)
 One master controller job
 At least one data load job
 One additional job either for the migration objects definition, access plan calculation or to change configuration settings in the Configuration & Monitoring Dashboard
Example
If you set the parameter Data Transfer Jobs to 04 in a configuration “SCHEMA1”, a mass transfer ID 001 is assigned. As a result, the following jobs should be in the system:
1 Master controller job: /1LT/IUC_REP_CNTR_001
 At most 4 parallel jobs for MT_ID 001: /1LT/IUC_LOAD_MT_001_001/~002/~003/~004
When configuring your data load or replication scenario, consider the following:
 Do not define more data transfer jobs than the number of available application server background work processes. If all available background work processes are already occupied by jobs, any other job will have to wait until a free work process becomes available. This can lead to long wait times until a new activity (for example creating triggers) can start, and can also result in significantly increased latency times for data replication.
 The number of dialog work processes in the source system corresponds 1:1 with the number of data transfer jobs in the SAP LT Replication Server system.
 Besides the work processes allocated by the data transfer jobs you need to provide additional available work processes for controller and monitoring jobs, the migration objects definition, access plan calculation or to perform configuration changes, and so on.
Sizing for SAP LT Replication Server involves determining how many work processes are required to perform the initial load of data into the target system within an acceptable timeframe, and accomplish the change capturing and the transfer of data changes to the target system within expected latency times.
Ensure that you add enough additional work processes to allow other required SAP LT Replication Server jobs to run.
Finally, you map the number of required application server work processes to their system resource consumption (CPU, memory, disc space) using the formulas provided by the SLT Sizing Guide.
With the simple formula below, you can calculate the number of required application server work processes (WPs) on the SLT Server for each active SLT configuration.
The number of required work processes can be determined by adding
 The Number of required data transfer jobs ,
 plus one background work process for Central Master (Monitoring) Job (only one per system!),
 plus one background work process for Master Controller Job,
 plus 3-5 additional empty background work processes (recommended per configuration),
 plus approx. 3 dialog work processes (recommended for each configuration).
Note: A lack of available free application server work processes can negatively affect the data load or data replication processes.
To summarize everything, the number of 'Data Transfer Jobs' must be set depending of the number of source tables, it is not the actual number of tables.
Assume that for my 100 tables I use 10 'Data Transfer Jobs' :
- The number of work processes on the SLT server would be 20. I took the simple formula of the documentation:
10 data transfer jobs ,
+ 1 background work process for Central Master (Monitoring) Job (only one per system!),
+ 1 background work process for Master Controller Job,
+ 5 additional empty background work processes (recommended per configuration),
+ 3 dialog work processes (recommended for each configuration).
- The number of dialog processes on the source server would be 10 ( equal to the number of 'Data Transfer Jobs')
Am I correct ?
Regards,
Christian

Monitoring of remote system's Transactional RFC and Queued RFC

Hello,
In our production system, in rz20- CCMS monitor templates- Communication-Transactional RFC and Queued RFc- outbound queues- Queues otherwise not monitored we can see blocked queues for each client.
System is connected to solution manager and we wish the central auto reaction is implemented in solution manager
However i am unable to find Transactional RFC and Queued RFC for the remote system, they exist only for solution manager itself
Tell me how can i do the central monitoring

Hello,
First you need to check with your Landscape in solman in order to monitor any kind of activities to do so pls follow these steps.
Go to SMSY in solman under Landscape components>Product systemsselect you satellite system example SAP ECC.
On the main screen you will find client for which you have generated RFC connection. Please check though connection are working fine, Go to edit mode and try to click on generate button there will be a pop-up, which gives a clear picture of RFC connection which already exists, and you can also re-generate this RFC connection by clean it up when you re-generate pls select under Actions after generation assign RFC dest for system monitoring.
But make sure there is no project impact on this RFC, like they are not using any logical components and already have some projects running on this RFC connection.
I would advise you to first you the option of assign and check RFC button which is next to generate icon.
Regards
JUDE

Central Autoreaction method won't assign to remote system

Similar Messages

Maybe you are looking for