Centro freezing up...unable to use any buttons

My Centro freezes up and the only way to get it back working is a soft reset by taking the battery out in back and putting it back.....help?  anyone else having same issues?
Post relates to: Centro (Verizon)

HI kimkrzy,
Welcome to the Palm Forums. This is most likely due to an incompatible 3rd party application. Here's a couple things to check.
1) Check the error log:
Open the Phone App
Dial #*#377#
This will give you the cause of the last reset (might not display anything since the device is freezing, not resetting. That's ok, I just want to check). If there is a message, post the whole thing here.
2) Check the installed 3rd party apps:
Open the Phone App
Dial #*#37789#
This will list all the 3rd party apps installed. Post the list here so we can check it. 
Post relates to: None

Similar Messages

  • Restored nano 6 but i am unable to use any buttons as nothing happens when they are pressed any ideas?

    Hi, i have a nano6 which i have restored. All songs etc have been loaded but  when i press the screen to play etc nothing happens. Any ideas

    Maybe try pressing both the vol. buttons as well as the power button at the same time.

  • I have an ipad and it has iCloud is unable to access account and it won't let me go to settings or use any buttons

    I have an ipad and it has iCloud is unable to access account and it won't let me go to settings or use any buttons.  How do I fix this?

    Go to Settings>General>Restrictions>Accounts (near the bottom) and set this to Allow Changes.

  • HT201270 I have an iPad 3rd gen. A carrier settings update notification has appeared on my screen, and it doesn't do anything when I press either 'update' or 'not now' . Because the notification is still there, I am unable to use any apps or shut it down.

    I have an iPad 3rd gen. A carrier settings update notification has appeared on my screen, and it doesn't do anything when I press either 'update' or 'not now' . Because the notification is still there, I am unable to use any apps or shut it down. What should I do?

    Have you tried a reset by pressing and holding the sleep/wake button and the home button for 20 seconds (maybe longer) until the Apple logo appears, ignore the red slider.  Then turn back on. You won't lose any data doing the reset.

  • Unable to use any of my videos!

    The app states it is unable to use any of my videos. First of all the contrast and lighting couldn't possibly be better. I'm a brunette in a red top, against a beige wall, talking to the camera, sitting completely still in a very well lit room. Please explain to me why it can't find a "still shot". The videos I've seen this app advertise for, the ppl in them aren't sitting still at all! I've reshot this video 5 or 6 times and it won't choose any of them. Please help me, I want to send this as a Valentines Day card...

    Hi andybanana,
    I believe you are referring to the Live Photo app, is that correct? If so, maybe you can find the answer here: HP Live Photo FAQ, Help, and Support, in a post done by PrintApper.
    I hope this helps.
    Ps. Their direct support is located here, via Email: [email protected]
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • I have Adobe Acrobat Pro 9, moved it to a new computer, reregistered, and now am unable to use any of the edit capabilities. Help?

    I have Adobe Acrobat Pro 9, moved it to a new computer, reregistered, and am still unable to use any of the edit capabilities. Help?

    We always like to know what solutions work. The other options that would cause problems include:
    1. the file is either secured or a PDF/A
    2. you need to update Acrobat (Help>Updates)

  • I cannot use any buttons on the display panel. The power is on and the display is lit up

    All-In-One Printer L7780  Windows 7 64-bit
    I cannot use any buttons on the display. The power is ON and the display is lit up. I have pulled the plug and waited a while and plugged it back in (several times over two days) but nothing changes.
    The diagnostics from the computer don't help. I can see the ink level and I can print a test page but the scanner does not work.
    This Printer just works when it wants to. The wireless connection only worked once in a while.
    Any help would be appreciated. Thanks!  Benno Wallé

    This may offer some help:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02716671&tmp_task=solveCategory&cc=us&dlc=en&la...
    007OHMSS
    I was a support engineer for HP.
    If the advice resolved the situation, please mark it as a solution. Thank you.

  • Cannot use any buttons or controls when runnning program

    When i run my program i cannot use any buttons (e.g. while loop stop,pause, ...) or any numeric controls.
    Also i cannost scroll or use tab controls. But the program itself is running normally.. i can see normal results as before.
    Problem is it used to work just well before. So i have no idea what happended or if i did something wrong ... but its not working anymore.
    Any idea what might be the problem here?

    Petricek wrote:
    When i run my program i cannot use any buttons (e.g. while loop stop,pause, ...) or any numeric controls.
    Also i cannost scroll or use tab controls. But the program itself is running normally.. i can see normal results as before.
    Problem is it used to work just well before. So i have no idea what happended or if i did something wrong ... but its not working anymore.
    Any idea what might be the problem here?
    I guess the doohickey is no longer connected to the whatchamacallit.
    Your time would probably be better spent playing detective and trying to figure out what happened to make it get to that state.  Does this VI read any sensors or equipment?  Maybe the equipment is turned off, causing the VI to become non-responsive until the timeout (and you were just never patient enough for it to reach the timeout before aborting?)  It's probably not a LabVIEW issue, but to be safe, check the dates on the files to make sure no one was futzing with it.
    Bill
    (Mid-Level minion.)
    My support system ensures that I don't look totally incompetent.
    Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

  • How do I revert back to IOS 10.8 on my 27" iMac?  Since I upgraded to 10.9 on Monday I am unable to use my buttons in the App Store window, notes or ibook window.

    How do I revert back to IOS 10.8 on my 27" iMac intel version?  Since I upgraded to 10.9 on Monday I am unable to use my mouse buttons in the App Store window, notes or ibook windows.  It works everywhere elese but not in any Apple application system windows.

    I'll try it. I don't have much confidence in it actually working since I'm having the same issue with all mouses (Bluetooth and wired) and my Bamboo Create.
    Can you also tell me how to revert back to IOS 10.8 in case resetting mouse preferences do not work?  I have already gone back and restored my system to before the up grade but it didn't restore the IOS system.

  • Help needed - want to skip to the menu screen, using any button!

    hey there -
    i'm creating a DVD in DVD Studio Pro 4 - when the DVD is inserted, the viewer is treated to a bunch of trailers and previews - it's set up with the "First Play" option. i have to do it this way, for the client.
    obviously, i'd like the viewer to be able to skip that stuff and go straight to the main menu. after all, that would be a pain to go through, again and again, if one wanted to watch the DVD mulitple times.
    i want to create the DVD in such a way where the viewer can hit ANY button to skip the initial previews and end up on the Main Menu screen. they should be able to hit the "chapter forward" button, the "menu" button, or any other button. in other words, this should be a very user friendly DVD, for those that want to skip over this stuff.
    is this possible? how do i do it? do i need to make a script? it's bugging the heck out of me, and the deadline is coming up way too fast...
    thanks!
    -kenneth
    mac dual 2.7 G5   Mac OS X (10.4.5)   dual-layer burner

    i want the user to be able to hit the "next chapter" button, or, ideally, any button; to get to the main menu. again, this is during the 2-minute trailer ad that occurs before the menu.
    Place a Chapter Marker at the end of the track and set that to have an action to jump to the menu. (Place it at the very end of the track, and also have the tracks end jump jump to the menu, actually to prevent certain players ffrom blowing through chapter markers, place two chapters at the end, the action for the next to last one jumps to the menu, and also DISABLE all actions at the Marker, then the same for the next one.) You can also make it a story witth Marker 1 & 2 and then set the jump to the menu.
    The inspector on the track provides all the main buttons on a remote, but some (like subtitle or fast forward) may not do anything or just behavee like they normally behave with no way of overriding them.
    If you set the ones you can in the inspector for the track and then also use the chapters described above, you hit most of the main buttons you can.
    Since pictures are worth 1000 words, download this little project to see what I am talking about
    http://www.geocities.com/mypix013/MenuCall.zip
    Also look at this thread
    http://discussions.apple.com/thread.jspa?threadID=459698&tstart=0
    Where there is some discussion of some things that cannot be done, particularly relating to subtitle buttons (if Hal and Jake say certain things can't happen in DVD SP, you can be pretty much assured that it can't happen)

  • Unable to use any 3rd party DNS servers

    Hi
    I've recently signed up to BT Infinity.  I've noticed that I'm unable to configure any of my devices with a 3rd party DNS server (e.g. Google DNS, Open DNS etc...) as I get blocked by BT's parental controls:
    See here, I'm using Googles DNS servers (8.8.8.8 and 8.8.4.4):
    When I try to access any URL's I get the following error:
    Note that I have turned off Parental Controls:
    This is something that is happening on all my devices (tablet, PS4 and PC).  I'm fairly certain this worked a few weeks ago.
    Can anyone help?
    Solved!
    Go to Solution.

    You will need to delete the Parental Controls, then wait a couple of hours.
    BT Parental Controls do not allow themselves to be bypassed by people using other DNS servers.
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Unable to use headset button to answer call

    Version = Skype for Android 5.7.0.13054Phone = Samsung Galaxy 4Headset = Plantronics Voyager Legend bluetooth I have the headset working OK with the phone and can answer calls to the mobile number by pressing the button on the headset, but have been unable to answer any calls to Skype this way.I have paid for a Skype phone number and would also like to be able to answer Skype voice calls from the headset, but have not been able to get this to work.  I always need to answer the call from the phone - the headset works OK once I have done this.Has anyone managed to get a similar setup working so that Skype voice calls can be answered by pressing the button on the headset?  Or, does anyone have any idea how to overcome this? Thanks Richard

    Sometimes this revives those buttons.
    With the battery and AC adapter removed, close the Power switch for 30 seconds.
    Re-attach those, press the Power button to turn the computer on, and then immediately press the F2 key while the Toshiba logo is displayed. Press F9 to restore the BIOS default settings, press F10, and then select Yes (Exit Saving Changes). The computer will restart.
    -Jerry

  • How do I remove plug-ins?  I have "extensions" turned off but am unable to use any internet games - receive error message saying to remove plug ins

    Since  a recent software update I've not been able to use any internet games - says to remove plug ins.  I have turned off all extensions and followed other online advice to remove plug ins, but the games still do not work

    I am getting an error with iTonerSupport not in 64bit mode.
    It seems in my case this folder: /Users/[yourusername]/Library/iTunes/iTunes Plug-ins is no longer viewable in the finder window.
    I had to navigate to this folder via the terminal comand line and delete the iTonerSupport.bundle using rm -r command.
    Hope this helps.

  • System freezes(Hangs) if I use Print Button

    Hello,
    I created few dashboards using SAP xMII.Once I logon to the application, if I press Print button to take the print of the Dashboard screen, System Freezes(Hangs).
    Than I have to use Task Manager and kill SAP xMII session thread to close the application.
    Did any body came across similar kind of experience or knows about the problem?
    Help will be highly appreciated.
    Regards
    Raman

    Raman
    R using window.print() function for this or wat?
    One important thing to remember
    <b>A printer friendly page is really just a page with text, no images, graphics, navigation or advertising.
    </b>
    Regards
    Som

  • RoboHelp 8 Freezes When Trying to Use Any Open Dialog

    The title pretty well says it all. RoboHelp freezes when I try to use Open... from the Starter screen or File>Open or any other control that accesses the open dialog (i.e., the open/explore button on the Content Settings tab in the FrameMaker Document Settings dialog). I have to end the process in the Task Manager and restart RoboHelp. (Fortunately, the Recent Projects links work – except for Open..., of course.)
    I discovered this when I had to restore links to moved FrameMaker documents. My installation is TCS2 running on Windows 7 32-bit; all updates to all TCS2 components and Windows 7 have been installed.
    I tried an in-place reinstall of RoboHelp, but that didn't make any difference.
    Any ideas?
    Thanks,
    John

    Hi John and welcome to the RH community.
    I'd check that you have both of the 8.0.1 and 8.0.2 updates installed. Also ensure your RH source files are not located on a network drive. Bare in mind that whilst some users manage to run RH under Windows 7, others have reported problems. You should also note that Windows 7 is not an officially supported platform for RH usage.
    Read the RoboColum(n) for a tips, tricks and musings on the Technical Communication Suite products.
    Follow the RoboColum(n) on Twitter

Maybe you are looking for

  • Vector shapes printed jagged - or is it me?

    http://prosol1.com/mw_images/pen_tool_lines.pdf i created the above in ill CS4 [i created the above PDF for you to see].  i printed it direct from the ill file and the curves are not what i thought they would be.  but then again, maybe it's because o

  • Result row shows min. value as Blank.

    Hi Guru, I have following scenario in query, Eg. 1.Values in objects in column,                           10,000                                                                         Blank (no value)                                                 

  • Error when deploy application on weblogic's console(weblogic 10 on AIX)

    ?:| After successfully start weblogic,I access console and select "Deployment".While I click "Finish" after choose the application named "ls_app", an error appears as follow. - Messages The deployment has not been installed. java.lang.NullPointerExce

  • Adobe reader XI will not install update automatically downloaded

    I'm using Win 7 64 bit. When I try to install a downloaded update for the program I get the following message: An error occurred. Please check for updates again later. Error: 130200 This has been going on for a bit. Any suggestions on getting reader

  • How do I save an iWeb page on an usb 'thumb' drive?

    My children ate creating pages in iWeb at home and want to continue their development at school. Can they 'save' or 'publish' their pages at home to the removable drive and then upload and work on another computer? If so, what are the files they need