CF7, CF8, CF Administrator and JRun Launcher Issue

I've got 2 cf8 instances and 2 cf7 instances installed. The
odd thing is that the jrun launcher and cf administrator don't
recognize that the cf7 instances are running. I can stop and
restart them just fine using the JRun Launcher, but only after I
use the Windows Service MMC to stop the services. Any ideas on why
this is happening?
Also, is there any way to tell the JRun Launcher to use a
specific jvm.config file for starting up an instance?
The command line jrun -config jvm_cfusion7_1.config -start
cfusion7_1 works just fine, but I really need these to run as a
windows service so they are automatically started when the box
boots up.

Jon,
As another long time CF Admin/Dev I second everything you've
said here..
I've been using the CFMX/JRun mix for years now and love it;
but I'm always finding myself spending way too much valuable time
looking through these boards for solutions.
I particularly like the idea of setting up a 'kit' with a
full dir structure, etc. - That would be a great idea for newer
users.. I'd also like to see better commenting or readmes that
fully explain the configuration options for all files - such as all
of the xml files under the WEB-INF dir..
There have been a few too many times that I've looked in the
documentation only to have it tell me to get a book for 'advanced
config options' - and I wouldn't consider any of what I'm looking
to do to be 'advanced'.. thank god for Ben Forta!
-mw

Similar Messages

  • Anyone else upgraded to yosemite 10.10.1 and having launch issues (crashing) when opening CS6?

    Anyone else upgraded to yosemite 10.10.1 and having launch issues (crashing) when opening CS6?
    Need a fix!

    Hopefully this helps:  I had one plugin (Vectorworks) which I deleted and now it opens.  Try deleting any plugins if you have any if you've run out of options. Took me hours to figure that out.
    On a side note, Yosemite sucks.  Spread the word.

  • HDMI TV launcher and Camera quality issue after update to android 4.0.4

    Hello ,
    I've bought a Xperia S LT26i with android 2.3.7 ,all went ok ,camera worked ok ,HDMI and tv launcher no issue.
    After i've made a OTA upgrade to Android 4.0.4  6.1.A.2.55.
    Now after this update ,TV Launcher over HDMI does not work anymore and all potos from camera dooring day time or night have lots of noise.
    Also in video mode ,is the same ,using any kind of settings from camera ,dose not doo any kind of noise reduction.
    Any idea how i can fix this maybe ?

    I suggest that you try to run a software reinstall using SUS.
    http://www.sonymobile.com/gb/tools/update-service/
    If the problem still remains you should contact your local support team, to have the phone examined and fixed at an repair center.
    http://www.sonymobile.com/global-en/support/contact-us/contact-info/
     - Community Manager Sony Xperia Support Forum
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • After loading Maverick iTunes will not launch.  I get an error code: -45054.  I am the administrator and have no groups or guests.  Sharing options don't fix this.  Als Fetch will not launch, I get error code: SSL error 9807.  These worked perfectly befor

    After loading Maverick iTunes will not launch.  I get an error code: -45054.  I am the administrator and have no groups or guests.  Sharing options don't fix this.  Also Fetch will not launch, I get error code: SSL error 9807.  These worked perfectly before installing Maverick.  Also everything that loads, all programs, take twice as long to load.  I have MacKeeper and have cleaned and discarded all the garbage. 

    Remove "MacKeeper" as follows. First, back up all data.
    "MacKeeper" is a scam with only one useful feature: it deletes itself.
    Note: These instructions apply to the version of the product that I downloaded and tested in early 2012. I can't be sure that they apply to other versions.
    If you have incompletely removed MacKeeper—for example, by dragging the application to the Trash and emptying—then you'll have to reinstall it and start over.
    IMPORTANT: "MacKeeper" has what the developer calls an “encryption” feature. In my tests, I didn't try to verify what this feature really does. If you used it to “encrypt” any of your files, “decrypt” them before you uninstall, or (preferably) restore the files from backups made before they were “encrypted.” As the developer is not trustworthy, you should assume that the "decrypted" files are corrupt unless proven otherwise.
    In the Finder, select
    Go ▹ Applications
    from the menu bar, or press the key combination shift-command-A. The "MacKeeper" application is in the folder that opens. Quit it if it's running, then drag it to the Trash. You'll be prompted for your login password. Click the Uninstall MacKeeper button in the dialog that appears. All the functional components of the software will be deleted. Reboot.
    ☞ Quit MacKeeper before dragging it to the Trash.
    ☞ Don't empty the Trash. Let MacKeeper delete itself.
    ☞ Don't try to drag the MacKeeper Dock icon to the Trash.

  • When I try to save, I keep getting the message "The document could not be saved. You don't have permission" - even though I am the Administrator and the Get Info displays "Administrator and (me)".

    When I try to save, I keep getting the message "The document could not be saved. You don't have permission" - even though I am the Administrator and the Get Info displays "Administrator" and my_name(me)". Also, when I do a disk permission repair, it always repairs the same applications and files. Last night, I did a disk permission repair twice and both times it took a long time and did the exact same repair both times.

    Disk Utility won't repair your home folder.  Sounds like your home folder permissions are messed up tho.  Try repairing them this way by using Lion Recovery.
    1. Restart Lion, and before you hear the chime, hold down the Command and R keys.
    2. You’ll be at the Repair Utilities screen. Click the Utilities item in the Menu Bar, then click Terminal.
    3. In the Terminal window, type resetpassword and hit Return.
    4. The password reset utility window launches, but you’re not going to reset the password. Instead, click on icon for your Mac’s hard drive at the top. From the dropdown below it, select the user account where you’re having issues.
    5. At the bottom of the window, you’ll see an area labeled Reset Home Directory Permissions and ACLs. Click the Reset button there.
    The reset process takes just a couple of minutes. When it’s done, exit the programs you’ve opened and restart your Mac.
    Good luck
    RM

  • ITunes 7.7 Launch Issue

    Hi,
    I had a working iTunes 7.6 installation on 32-bit Vista.
    I've installed iTunes 7.7, which installed no problem and displayed the licence agreement screen to me. I then clicked 'Agree' and it went away.
    I can see it running in my task manager, however see no GUI.
    Rebooting the PC, 'fixing' the installation, uninstalling and reinstalling haven't helped.
    I click the iTunes icon, it shows me the progress bar 'Loading iTunes Library', and then the progress window vanishes and I see no iTunes. It is, however, running in my task manager.
    Does anyone have any suggestions?
    Many thanks

    Let's check to see first if this is a systemwide issue or if it is specific to a single user account.
    Try creating a new user account (With full administrative rights) as per the instructions in the following document:
    iTunes for Windows Vista: Troubleshooting unexpected quits, freezes, or launch issues
    Now log out of the old user account and log into the new one.
    Try launching iTunes in the new account. Does an (empty) library screen eventually come up, or do you get the same kind of behavior as you do with the the usual user account?

  • TS1717 iTunes will not start on my PC, I have been through all the suggested "iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues" to no avail.  Please help

    I am trying to get iTunes up and running again on my PC. I have followed the "iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues"  I have uninstalled, re installed, made a new user account gone through the system - wide fixes and still no joy.  There are 5 Ipod devices in the house and we deperatly need to get this fixed.
    Any help would be greatly appreciated
    Robert

    Refer to following articles to remove SC file(s):
    Win 7/Vista http://support.apple.com/kb/TS2363
    WinXP http://support.apple.com/kb/TS1776
    Then proceed to repair your Quicktime:
    Control Panel >
    Win7/Vista - Programs n Features.
    WinXP - Add n Remove Programs
    Hightlight QUICKTIME and click CHANGE then REPAIR.

  • Itunes 10.1.1 for Windows 64 bit launching issue

    Trying a clean install of itunes on Windows 7 64 bit machine. It downloads and seems to install okay. Launch program and it looks like nothing happens. Check running services and it appears there. Tried uninstalling, removing and re-installing everything per Apple support and same thing. Quicktime launches fine. Installed and running on account with Administrator privileges. Wanted to give this laptop to my daughter all ready to go for Christmas. Any ideas would be really appreciated. TIA

    Launch program and it looks like nothing happens. Check running services and it appears there. Tried uninstalling, removing and re-installing everything per Apple support and same thing. Quicktime launches fine.
    Excellent info thanks, julie. That's ruled out a bunch of things already.
    Checking now on one further common cause of error-message-free itunes launch failures in recent times.
    Try (by way of experiment) disabling the BonJour Service.
    In your Start Menu, right-click Computer and select "Manage".
    Expand "Services & Applications".
    Open "Services". (Maximise the window to better see what's going on.)
    Right-click the BonJour Service and select "Properties". In the "General" tab, set Start-up type to "Disabled".
    Restart the PC, and try launching iTunes again. Does it launch this time?
    If iTunes launches with the BonJour Service disabled, by any chance do you have a recent version of IOBit's Advanced SystemCare utility currently installed on the PC? If so, try uninstalling and reinstalling Advanced SystemCare. Can you launch iTunes without having to disable the BonJour Service now?

  • ITunes closes down due to new registry error message.  Says to reinstall, I do and still same issue.

    All of a sudden iTunes is giving me a message when opening - "registry settings for importing and burning CD are missing.  Please reinstall iTunes.".  I did and still same message - then shuts down totally.  New problem, nothing changed/  Help?

    Hey clueless2661,
    Thanks for using Apple Support Communities.
    If iTunes for Windows won't open, try using the steps.
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/ts1717
    Have a nice day,
    Mario

  • I am using an early 2008 MacBook Pro and am having issues with it deleting text on its own (in word, emails, etc.). As I am typing it all of a sudden starts deleting and I can't stop it. What can I do?

    I am using an early 2008 MacBook Pro and am having issues with it deleting text on its own (in word, emails, etc.). As I am typing it all of a sudden starts deleting and I can't stop it. This happened once before and it was due to a buldging battery pressing on the track pad. I checked the battery and it appears to be fine. What can I do?

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
    Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
    When you see the gray Apple logo, release the shift key.
    If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.  The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    *Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.
    Test while in safe mode. Same problem?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

  • Printable PDF and few other issues

    Hello,
    I am using BIEE 11g and experiencing few issues and looking for advices for issues below :
    1. Printable PDF format
    - When i download dashboard and answer to printable PDF, the PDF's format doesnt seem following the format of dashboard. It maintains overall format, but it becomes uneven. And gap between sections and columns of dashboard are quite different with it of dashboard on the screen.
    - Image included inside columns of table for conditions, It looks fine on the dashboard and answer, but it gets misplaced if i download them in PDF or PPT. Sometimes the images are outside the table. However, it works fine with Excel.
    2. Mobile Device Management
    - For addition of new mobile device, I go to Administration => Manage Device Types. When i try to create a new device, it gives me error message saying "This Device Type cannot be deleted/updated as it is a pre-configured system device". Is there anyway i can add new devices?
    3. MS Word. Direct download impossible for dashboard and answer
    - This one is simple. Is it possible to download answer or dashboard directly as MS Word format. I heard that security of MS Office blocks users for direct download.
    Thanks in advance.

    AngM627,  I can imagine how frustrating it must be for you to keep receiving the notification advising you to update your phone software. Do you mind telling me which software version is on your Incredible 2?

  • Using administrator and non administrator accounts - questions

    I have been looking around re security for my iMac - newly updated to Snow Leopard.  I am not very savvy re much of computer things.  I just found a pdf entitled Mac OS X Security Configuration.  It recommended having a standard nonadministrator account as well as an administrator account.  When I first set up my iMac in Leopard coming from a pc, I had telephone support for my first three years and used it when I ran into some issues.  During that time following directions from different support people I have ended up in Systems Preferences "Accounts" having 5 different accounts - one "Administrator", one "Login only" entitled "Guest Account",  and three Standard [one entitiled with my name and the other two "TEST1" and "TEST2"].  When I am in the "accounts" window in Systems Preferences, my "Administrator" account is selected, but I cannot select any of the others.
    I am thinking from what I read in the article that I should probably delete the three "standard" accounts so I am left with the "Administrator" and "Guest" accounts. And then when my computer turns on, it will use my "Guest" account.  Would you agree?  Right now when I want to get back in after my computer went to sleep, I have to enter my password.  Would this not be required if I am in the "Guest" acccount?
    Two questions:
    (1)  I don't know how to delete those accounts - if, in fact, I should. 
    (2)  How and when will I use the two accounts that are left when the computer turns on?

    1.  You can delete the Test1 and Test2 accounts if you log into your Administrator Account. Once in your Admin Account, open System  Preferences > Users & Groups and you will see and be able to delete the Test1 & Test2 accounts.
    2.  Leave your Guest account for, well, guest users.  Do not use it in the normal course of events.  When you log out of the Guest account, all the settings, caches, etc. are wiped, as are all files and folders that you may have saved in the Guest account home folder.  The Guest account is truly designed only for temporary, guest use.
    3.  Leave your Administrator account for use only for installing programs, doing system administration, managing accounts, etc.
    4.  User your named account as your regular account.  It appears to already be a User account.  The primary limitation is you cannot install programs in a regular User account.  This actually helps protect your Mac from viruses and other malware that would need to install software in order to corrupt your system.
    5.  You can turn off the need to enter a password when your computer sleeps in System Preferences > Security & Privacy > General.  UNcheck the option called "Require password for sleep and screen saver."

  • Error searching for from role provider Microsoft.Office.Server.Security.LdapProviderException: Unexpected exception occurred, please contact administrator to resolve this issue.

    Hi,
    I am trying to configure FBA with ADLDS on SharePoint 2013 Enterprise.
    I have edited, web.config files for Central Admin, Security Token Application and Claim aware WebApplication.
    <PeoplePickerWildcards>
    <clear />
    <add key="XXPROVIDERMP" value="%" />
    <add key="XXPROVIDERRM" value="%" />
    <add key="AspNetSqlMembershipProvider" value="%" />
    </PeoplePickerWildcards>
    <membership defaultProvider="i">
    <providers>
    <add name="i" type="Microsoft.SharePoint.Administration.Claims.SPClaimsAuthMembershipProvider, Microsoft.SharePoint, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" />
    <add name="XXPROVIDERMP" type="Microsoft.Office.Server.Security.LdapMembershipProvider, Microsoft.Office.Server, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71E9BCE111E9429C" server="CSERVER" port="389" useSSL="false" userDNAttribute="distinguishedName" userNameAttribute="userPrincipalName" userContainer="CN=Clients,CN=Extranet,DC=XXDCNAME,DC=dmz" userObjectClass="person" userFilter="(|(ObjectCategory=group)(ObjectClass=person))" scope="Subtree" otherRequiredUserAttributes="sn,givenname,cn" />
    </providers>
    </membership>
    <roleManager defaultProvider="c" enabled="true" cacheRolesInCookie="false">
    <providers>
    <add name="c" type="Microsoft.SharePoint.Administration.Claims.SPClaimsAuthRoleProvider, Microsoft.SharePoint, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" />
    <add name="XXPROVIDERRM" type="Microsoft.Office.Server.Security.LdapRoleProvider, Microsoft.Office.Server, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71E9BCE111E9429C" server="CSERVER" port="389" useSSL="false" groupContainer="CN=Clients,CN=Extranet,DC=XXDCNAME,DC=dmz" groupNameAttribute="cn" groupMemberAttribute="member" userNameAttribute="userPrincipalName" dnAttribute="distinguishedName" groupFilter="(ObjectClass=group)" scope="Subtree" />
    </providers>
    </roleManager>
    When I am trying to find user in People Picker, getting error
    Error searching for "XXUSER"from role provider "XXPROVIDERNAME" Microsoft.Office.Server.Security.LdapProviderException: Unexpected exception occurred, please contact administrator to resolve this issue.
    Has someone else faced this issue?

    Figured it ! 
    Account which was accessing FBA didn't had permission on it.

  • DV7-1279WM microphone and quick launch buttons stopped working

    For some reason my quick launch buttons and microphone have stopped working on my DV7 laptop. I know that I recently used the microphone on a Skype call, but believe since that time that Vista SP2 was installed. I am not sure when the quick launch buttons were not working, but have just literally (talking less than a week ago) got the laptop back from HP for a warranty issue with the display. A strange thing I noticed is that if i look under the settings in Skype, the microphone will record a level for a split second, but then go back to nothing again (someone I was trying to talk to said they could hear me for a second).
    I thought it might be the same problems as in the 35 page thread on here, but I have sound, its only the microphone and quick launch buttons that are not working. So far I have rolled back, installed and updated sound drivers, BIOS and Quick Launch software, but no luck.
    Any suggestions? Thanks.

    Sometimes electrical components needs to have all power sources removed and reintroduced to work properly.  Try performing a hard reset first, if it doesn't work then we'll move to the next step.
    To Perform A Hard Reset
    Shut down the computer by going to the Start menu and selecting shut down. (If you have no display, hold the power button down for  5 seconds)
    Disconnect the AC Adapter from the notebook.
    Remove the battery from the bottom of the notebook.  There will be a switch/button to eject the battery.
    Wait at least 1 minute with all power sources disconnected.
    Re-insert the battery and reconnect the AC Adapter and then attempt to power on the notebook.

  • Itunes has stopped working. This comes up everytime I launch ITUNES.  I've uninstalled, reinstalled, removed support programs reinstalled support programs, created different user and problem still persists.  Quicktime and Safari launch fine.  Just itunes.

    Itunes isn't working properly.  I get this message every time I try and open Itunes.  I've uninstalled, reinstalled itunes and all the support programs.  Quicktime and Safari launch fine. Tried it with Nortons antivirus turned on and turned off etc.   I've gone through the Apple Support file and removed the itunes preference files, I've started in safe mode and it still persists.  This only started about a week ago when I changed over to my Iphone 4s.  My phone loaded fine and backed up etc and now NOTHING....
    I've got a Dell Inspiron 9400 with updated BIOS running Windows Vista Home Premium.
    HELP..THIS IS WHAT I GET.  Looks like a ntdll.dll error????????????????????????????????????????????
    Problem Event Name: APPCRASH
    Application Name: iTunes.exe
    Application Version: 10.5.1.42
    Application Timestamp: 4ebf7d7c
    Fault Module Name: ntdll.dll
    Fault Module Version: 6.0.6002.18327
    Fault Module Timestamp: 4cb73436
    Exception Code: 80000003
    Exception Offset: 0004884e
    OS Version: 6.0.6002.2.2.0.768.3
    Locale ID: 3081
    Additional Information 1: fd00
    Additional Information 2: ea6f5fe8924aaa756324d57f87834160
    Additional Information 3: fd00
    Additional Information 4: ea6f5fe8924aaa756324d57f87834160

    I had a similar error, but relating to a different .dll file and on 32-bit Win7.  I think I isolated the problem to Norton Internet Security 2012 v 18.6.0.29 - iTunes would start fine with NAV Antivirus Auto-Protect disabled but crashed if Auto-Protect was on.  I tried running iTunes as administrator (right click on the icon and select "Run as Administrator"; to make this permanent right click on the icon > Properties > On the Shortcut tab, click Advanced > tick Run as Administrator) and iTunes now runs fine.  Maybe give that a try?

Maybe you are looking for