Cgg does not want to work in 64 mode

Hello,
i have a 5.9 Generic_117171-17 sun4u sparc SUNW,Ultra-5_10.
My isainfo -b gives 64.
Just by running my gcc 3.2.3 with no arguments (`gcc file.c`)
I get an ELF 32-bit MSB executable SPARC Version 1 file.
By typing `gcc -m64 file.c` i get:
ld: fatal: file /usr/ccs/lib/sparcv9/values-Xa.o: wrong ELF class: ELFCLASS64
ld: fatal: File processing errors. No output written to a.out
collect2: ld returned 1 exit status
Why my `isainfo -b` gives 64 and my executables are 32bit?
Why 64 doesn't go?
{} unity

Why gcc? Use SunStudio 11.
It is free as in beer,
has no problems with 64 bits and
has the best codegeneration for SPARC processors.

Similar Messages

I do not know what happened, all of a sudden Firefox does not want to work anymore. Had been conected to audible. Retried about 4 times.... no luck had to force

I do not know what happened, all of a sudden Firefox does not want to work anymore. Had been conected to audible. Retried about 4 times.... no luck had to force quit every time. The three Firefox app. into garbage, emptied garbage and redownloaded new version from Firefox. Reinstalled but same thing happened again... no connection.
What can I do, I like Firefox better than Safari, had it for years on my Mac.
Please let me know.
(Note: I have also mentioned this on the automatic response to the malfunctioning).
'''''Email removed by moderator to protect you from spam'''''

Hey.
I think it might be the problem with one of your plugins.
Try to uninstall the webbrowser AND remove the storage from Firefox in your user-account (Linux: /home/username/.mozilla). You can check the list of installed Add-Ons in Firefox under "Extras => Add-ons" or by pressing Shift + Strg + A (Linux).

My itunes does not want to work downloaded 5 times and still comes up with an error

my itunes does not want to work downloaded 5 times and still comes up how can I fix this ?

I have the same &*@#($@% problem....and I'm ******! I've tried everything. What error message are you getting? I am getting "Itunes folder could not be found or created. The default location is in my music folder". I've downloaded it a million times. It worked at first by going to a specific song and clicking it and/or plugging in my IPOD, but that stopped also.

Trying to update my Itunes software, now it does not want to work at all, givin strange error messages.

Trying to update my Itunes software, now it does not want to work at all, givin strange error messages.
First, when trying to sync ipod touch to Itunes, nothing happened. After that, Itunes suggested downloading and installing updates but now updates will not finish installation correctly and launch error messages. Any ideas?
TKS !

These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? Are they also 800736B3s, or a different error code? If they're different, what codes are you getting in Windows Update?

Hp Laserjet 3030 PCL6 Printer does not want to work on windows7 x64, help!!!

Hi to all , i really need some help with this one , i have a Hp Laserjet 3030 PCL 6 all-in-one printer at work on our network and i'm struggling to get it installed , ive tried looking on the net , ive tried the windows 7 drivers with the update function
basically ive tried everything that i can think of and the thing still doesn't want to install , on my x32 bit machine it works perfectly , windows picked it up and installed it automatically and i can carry on , but for some reason the x64 doesn't want to
do anything , please anyone ho can help with this issue , it will help allot since i have been struggling for 2 weeks now

Hi Marcel,
I had the same problem - THe Hp Laserjet 3030 PCL 6 all-in-one printer is connected to a Windows XP machine and from my Windows 7 (32 and 64 bit) workstations I could not print.
By some research and trial and error configurations, I am now able to print from my Windows 7 workstations. You can follow these steps and let me know if it works for you :
Step 1 : Make sure that the printer is shared on the Windows XP workstation and you can see the printer share while browsing your network e.g : \\XPWorkStation\Printer Share
Step 2 : Click Start and go to Device and Printers. Click on Add a printer
Step 3 : Choose add a local printer (Not a network, wireless or bluetooth printer)
Step 4 : On the next screen choose create a new printer port and in the port name type in the path to your printer share e.g : \\XPWorkStation\Printer Share
Step 5 : In the driver list, select HP and your model. In some cases, the Hp Laserjet 3030 PCL 6 does not appear in the list. You will have to click on Windows Update and then you will have an updated list of the printers available. Hp Laserjet 3030 PCL
6 is not available in Windows Update list. I selected Hp Laserjet 3030 PCL 5 and the driver worked fine for me.
Regards,
Varun

I dropped my IPhone 6 plus in water and now the power button does not want to work

So i had the Iphone 6 Plus in my hand when it feel into a big puddle and it was in there for more than a minute so i come home and i find out that the power button (on the right hand side button) doesn't want to work like its on and im on the home page and then i press the button and nope nothing and the volume button somewhat works and sometimes the power button works so i turn it off and i put it in the rice next thing you know the phone turns on again without me touching it or anything. So I need help and the phone is new not even a month i have had it and i don't want to spend money on it. Please help! This phone is my life and i will do anything(that does not wast money) to save my phone.

You can try leaving it in that bag of rice for 5-7 days to see if it will dry, however if it will not stay turned off, I would say that something is shorted out. You will need to make an appointment at the Genius Bar of the nearest Apple Store or Authorized Apple Service provider and be ready to pay for an out of warranty replacement. If you purchased Apple Care Plus there is only a deductible, but without it, you will have to pay the price of an out of warranty phone. User damage is not covered under warranty.

I have just installed mavericks OS.My epson printer does not want to work with it .What can i do?

I HAVE JUST INSTALLED MAVERICKS OS.IT APPEARS IT IS NOT COMPATIBLE WITH MY PRINTER WHICH IS AN EPSON WORKFORCE PRO WP-5630 SERIES 2.What can i do about this problem?

Hello Baldy7,
It sounds like after updating to Mac OS X 10.9 your printer is no longer working with the computer. U want to recommend these steps from the article named:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/TS3147
Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
Delete the affected printer, then add the printer again.
If the issue persists, try these additional steps:
Reset the printing system, then add the printer again.
If the issue still persists, reset the printing system again. Download and install your printer's drivers. Then, add the printer again.
Contact the printer vendor or visit their website for further assistance.
Additional Information
Note: If your printer is wireless-capable, you should first add the printer to your network. Use the printer's control panel, or temporarily connect the printer to your Mac via USB. For more details, see this article.
Thank you for using Apple Support Communities.
All the very best,
Sterling

Disk Read Errors - IPod just does NOT want to work

Alright, this thing is driving me CRAZY. It was working FINE until tonight when I accidentally synced and erased everything. Ugh.
Anyways, I've attempted multiple times to restore my IPod to the factory settings, and every time I get the same message: "Attempting to copy to the disk Ashley's IP' failed. The disk could not be read from or written to."
I even downloaded the IPod reset program and I get the same message. What is going on?? Ugh, I just want this thing fixed...

I have the same problem with ventrilo. Its very annoying, sometimes it works fine then 2 sec later it all distorted and sounds like crap. I'm not happy with this product thus far, it should not be this difficult to fix a mic on a pc. :smileyindifferent:

Unbelievable ... does not want to work

Hi fellow runners,
I have been struggling for the last week with this problem.
A) I have a iPod Nano 2G with a Nike iPod Sport Kit. Worked fine ... until the battery of the sensor ran empty after a month. So, I went back with my receiver and sensor and I got a whole new iPod Sport Kit.
B) Back home. I attached the new receiver and put the new sensor in my shoe. When I tried to connect to the sensor, I got the message that the receiver was allready connected to another sensor? So I choose to connect to the new sensor ... doesn't find a sensor.
What I allready did.
- Hold down the button of the sensor for 3 seconds, then shortly pressed it once so it should be on.
- Reset my iPod o original settings and made sure I installed all the updates.
- Put the sensor in other shoes (I know, I'm desperate)
- Attached the receiver to an iPod Nano 3G. Here I got the message that the sensor was allready connected to the sensor. But when I continue to search for the sensor, he says he can't find a sensor.
- When I connected this iPod to my Mac. There appear two sensors in my iTunes. (There was allready one of another iPod with Nike Sport Kit).
So at some level, a sensor was detected since it appears now in iTunes.
But non of the iPods finds the sensor. So I can't start a run on neither one of them.
Does anyone have any idea.
I am so frustrated by now, and very disappointed in the nIke iPod Sport Kit.
Tom
Message was edited by: Tom Verstappen

hey ok my friend hasthe same thing and i fixed hers right up ok what you have to do is press the menu and the middle button at the same time and the screen will go blank for about 5to 6 sec. but after that you press menu and everthing should be working but right now my i pod it says use i tunes to restore and every time i plug mine into the computer it says would you like to restore you i pod now or later and i click yes and nothing happens it says you can remove from computer now and i do and it says the same thing so if you know how to fix mine please tell me thanks.! and my ipod i a ipod nano.

Safari does not want to work when I am on free networks, like at airports, I am stuck using other browsers. Any suggestions?

Trying to use Safari to browse at the Harrisburg, PA airport. Only Chrome seems to work. The network is free and supported by the FlySmart App (SapientNitro company). I am not sure if this is a problem with my MacBook Air - I log in on my iPhone and use Safari fine on the iOS.
Are there any settings that I should tamper with?

Tq1, just checking in with you all my memail pinwhell is still spinning. I know you are all busy at work so when you have a moment, suggestions would be appreciated
Thanks
Tq1

Seems like I have created a problem a free application was offered: Adobe Revel, installed it, now mail does not want to work properly. Shut down computer. Reset Safari. To no avail issues still prevailing. Any suggestions. Computer now running slower,

Have ICloud, and mobile me and on mobile me a pinwheel continues to spin without stopping. Have turned off computer. Reset Safari. Pulled up system preferences and clicked on mobile me to see if it would clear up and to no avail as I am still typing this the pinwheel is still spinning and has been all morning. I have Lion version 10.7.4 installed over 1.5 months ago and have never had any isssues.
Any suggestions

Tq1, just checking in with you all my memail pinwhell is still spinning. I know you are all busy at work so when you have a moment, suggestions would be appreciated
Thanks
Tq1

I am using PageRage for my facebook theams and firfox does not want to work with it, it has in the past. And I cheack other browsers and it still works for them so I dont know if it is on your end or PageRage's.

The app that PageRage uses "Yontoo Layers(TM) Runetime" so nay Help or info would be appreciated.

Hi tekaryace, we can assist you, no problem! Do you know which version of Firefox you currently have? Did you recently upgrade to version 8? We suggest going within your browsers app settings to make sure that "Yontoo Layers" is enabled for PageRage. To get there, follow these steps: Open up your Firefox browser, click on the orange "Firefox" tab in the left hand corner > click add-ons > make sure that "Yontoo 1.20.00" is listed and enabled. If it is not, please let us know so that we can take this conversation offline to better assist you. Thank you for your patience!

6.1.2 does not want to work with Configurator

So I work in a school with 2 Bretfort carts and 60 iPads. I've used a Macbook Pro and Apple Configurator to send apps across all iPads and restrict certain settings. First I prepared every device, then created a master back up iPad. Recently, I updated one iPad to the new 6.1.2 IOS and now when I connect it to Configurator, I cannot edit it. I cannot add new apps, or change it. I see a small triangle with an exclamation point and the words "Device running new..." Right clicking gets me nowhere, double clicking too. How can I supervise a device that is running new IOS 6.1.2?
Mike

I'm having this same problem but when I click the button to "Check for Update" on the iOS in the profile, it appears to work but the iOS doesn't actually update in Configurator. The text on the iOS changes from 6.1 to 6.1.2 but when I plug in an iPad to refresh it via Supervise, the iOS changes back to 6.1 and I get the "cannot downgrade" error again.
Is there something else I can do to get the Configurator profile updated to 6.1.2?

Kaperski av does not want to work with 6.02 update

i try to install update and it tells me has issues with my av

I'm having this same problem but when I click the button to "Check for Update" on the iOS in the profile, it appears to work but the iOS doesn't actually update in Configurator. The text on the iOS changes from 6.1 to 6.1.2 but when I plug in an iPad to refresh it via Supervise, the iOS changes back to 6.1 and I get the "cannot downgrade" error again.
Is there something else I can do to get the Configurator profile updated to 6.1.2?

Z10 does not want to switch on

Hi I was busy installing the new software for the blackberry Z10 and it said download interrupted. Usually this means just remove battery and it will continue but not this time. The phone did reboot the first time but then froze so i had to restart again now it does not want to work. Tried leaving on charge then removing battery also tried connecting it to PC to see if that would wake it up nothing. Also tried to reboot by holding down volume keys and power button. Can someone Please assist thanks

If it were me I would try an autoloader. http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using...
Also see http://www.blackberry.com/btsc/KB27956 as an alternate potential solution.
- Ira

Cgg does not want to work in 64 mode

Similar Messages

Maybe you are looking for