Change Default User Creation OU in Unity 7.x

How do I change where users are created by default when they are added through the web system administration on unity 7.x and Exchange 2003? For a failover system do i need to modify it on both servers, or just the primary? I looked through the reconfiguration guide and didn't see anything that specifically covered this..
Thanks,

Re-run the permissions wizard
http://www.ciscounitytools.com/Applications/Unity/PermissionsWizard/Unity50/Help/PWHelp_ENU.htm

Similar Messages

How to Change Default User Directory without changing System Directory

Hi Everyone,
I need to change default User Directory for my JDeveloper 11.1.1.0.2.
Default User Directory = C:/JDeveloper/mywork
Default System Directory = *<JDEV_HOME>/System*
Now I Need to Change it to
My Default User Directory = C:/Monty/JDev11g2/
But System's Default Dir = *<JDEV_HOME>/System*(Same)
For this i explicitly Set variable ide.user.dir to C:/Monty/JDev11g2/ in JDev.boot file as explained in Installation document.
Working fine but it contains System Folder too. I don't want this.
Any Help to find me separate these both as it works for Single User.
Thanks,
Fizzz...

Hi John, You must be right if i'd believe in ghost, A Ghost of System's Folder :-). Well that's true, We should ignore it. But still If someone finds any Clue then let me know.
Thanks
Fizzz...

Changing Default user Preferences in Workspace

I am using HFM 9.3.1. Each time I set up a new user I have to get them to log in, and go through the following routine..
Go to File>Preferences. Then Select Financial Reporting on the left side of the preferences window. Under the Preview heading on the screen are two radio buttons for On and Off. Select On and click OK.
Does anyone know how to change the default setting on this Preference to On?

From the workspace administrators manual, the directions are:
Assigning Reporting and Analysis Default Preferences
User Management Console enables users with Provisioning Manager and Explorer roles to set
the default folder, new document folder, and start page application preferences for users and
groups. Individual and group preferences have precedence over default preferences.
For default preferences to succeed, users and groups must have the roles and permissions
necessary to access specified folders and interface elements.
Provisioning Manager is a Shared Services role that enables you to provisions users and groups
to applications. It is also required for setting default user preferences for Reporting and Analysis.
For more information, see the Hyperion Security Guide.
➤ To assign default preferences for Reporting and Analysis:
1 Select Navigate > Administer > User Management.
2 Log on to User Management Console with a user name provisioned with Provisioning Manager and Explorer
roles.
3 Expand the Projects node until a Reporting and Analysis application is displayed.
4 Right-click the application name and select Assign Preferences.A three-step wizard is displayed in the Process bar.
5 For step 1 of the Wizard, Select Users, select Available Users or Available Groups.
6 From the left panel, select user names or group names and click the right arrow.
To select consecutive names, select the first name, press and hold down Shift, and select the last
name. To select names that are not consecutive, press and hold down Ctrl, and select each item.
Use Add All to select all names.
7 Repeat steps 5 and 6 to select a combination of users and groups.
8 When all user and group names are displayed in Selected Users and Groups, click Next.
9 For step 2 of the Wizard, Manage Preferences, specify these default preferences for the selected users and
groups:
Managing Users 41
● Default Folder—Repository location of the default folder.
● New Document Folder—Default folder in which the new document wizard searches for
valid data sources, that is, Web Analysis database connection files and Interactive Reporting
documents.
● Start Page—Reporting and Analysis interface displayed after logging on. Select None,
Explore, Document, Favorite, or Scorecard.
If you select Explore or Document for Start Page, you must specify a repository location.
10 When all preferences are specified, click Next.
11 For step 3 of the Wizard, Finish, choose between three tasks:
● To configure options for another application, select one from the View pane.
● To change preferences for currently selected users and groups, click Back.
● To specify another set of users and groups and set their preferences, click Continue.

How I can change default user that executes the process chain in BW 3.1?

In others versions is possible the change it in: "Process chain" >>> Attributes >>> Execution User >>> tick "Current User"., but in BW 3.1 donu2019t has this option. I need to change the user default (ALEREMOTE)

M,
Equally, I canu2019t change the user using SM37 transaction, because when I schedule a process chain, occurred an error:
"Job BI_PROCESS_LOADING could not be scheduled. Termination with returncode 8
Message no. RSPC065
Diagnosis
Program RSPROCESS is to be scheduled as job BI_PROCESS_LOADING under user ALEREMOTE"

Connect as: change default user to connect to server

Hi,
I connect to my Windows Home Server which works fine, except that the default account it uses is never the same as the account I log in to my iMac.
How can I change the default user it uses to log in to the server?
I can, of course, keep using the Connect As button, but I just want the system to by default use my name instead of another user that is a registered user on the iMac system.
Regards,
Ennonl

Hi Kaatss,
You maintain this in the RFC destination of the source system transaction SM59 or go fra RSA1 -> Source systems -> Right click on your source system -> Connection param. -> Logon & Security tab.
Anyhow your problem sounds a bit weird as the same user should be used no matter if you execute a PC or an IP.
Hope it helps.
BR
Stefan

[SOLVED]change default access creation rights for the users

Hi!
When a user creating folders or files it will allow full access to all users who are in the same group.
How can I make the changes to be default instead of using chmod always?
Last edited by Andy_Crowd (2014-06-11 14:47:29)

Here is an example with some entries from my smb.conf
security = share
guest account = windowstools
[WT]
path = /home/Windows/Win-tools
public = yes
writeable = yes
create mask = 0000
guest ok = yes
browseable = yes
read only = no
Windows XP is connected to my Linux share. I want be able to create folders and have access within Linux and Windows with rwx rights for the group. For now files created from Windows getting default rights 755 (rwx,xr,xr).
windowstools:andy = is XP username/group
andy:andy = Arch Linux username/group
Windows XP is full updated (got problem once with connection to samba after update, got wait until next updates will come -.- , when new windows updates came XP could be connected to samba again, was a bug as I hoped).
I am starting/restarting samba with script like
#!/bin/bash
systemctl stop smbd
sleep 2
systemctl status smbd | head -1
systemctl status smbd | grep 'Active:' | awk -F')' '{print $1}' | sed 's/(//m'
systemctl stop nmbd
sleep 1
systemctl status nmbd | head -1
systemctl status nmbd | grep 'Active:' | awk -F')' '{print $1}' | sed 's/(//m'
systemctl start smbd
sleep 2
systemctl status smbd | head -1
systemctl status smbd | grep 'Active:' | awk -F')' '{print $1}' | sed 's/(//m'
systemctl start nmbd
sleep 1
systemctl status nmbd | head -1
systemctl status nmbd | grep 'Active:' | awk -F')' '{print $1}' | sed 's/(//m'
and not automatically on boot.
Windows XP is running in VMware Player on the same PC with Arch Linux.
Last edited by Andy_Crowd (2014-06-11 12:42:52)

How to change default /Users and /Groups to different Volume?

Users are created in /Volumes/<boot>/Users and groups in /Volumes/<boot>/Groups.
We need these to be created on a different volume, eg., /Volumes/External/Users, and /Volumes/External/Groups.
Setup Assistant correctly put user Backups into */Volumes/External/Shared Items/Backups* and also correctly put web services on /Volumes/External/ServiceData -- we want to do the same for Groups and Users.
Groups are the most critical, as the group needs bulk storage. Users we could leave as is if it can't be done.
How can this be configured? We've read File Server Admin, Open Directory Admin, and Advanced Server admin from http://www.apple.com/server/macosx/resources/documentation.html without finding an answer.
Thanks in advance.

1. Create new folders on the external volume to hold users and groups, but to prevent confusion name them something other than "Users" and "Groups". /Volumes/External/NetUsers and /Volumes/External/NetGroups would be reasonable choices.
2. Share both of these folders (in Server Admin -> server name in sidebar -> File Sharing -> Volumes & Browse modes -> select each folder -> click Share near the top right).
3. Enable both folders for automounting on clients (Server Admin -> server name in sidebar -> File Sharing -> Share Points-> select each folder -> Share Point tab under that -> Enable Automount option) with the default options (Directory: /LDAPv3/127.0.0.1, Protocol: AFP, Use for: User home folders and group folders). Be sure to click Save (not just OK in the dialog).
4. To migrate users, run Workgroup Manager, and change the home location for the users you want to move (select Accounts in the toolbar -> /LDAPv3/127.0.0.1 from the hidden pop-up menu under that -> User icon tab at the left -> select the user(s) you want to change -> Home tab on the right -> select the NetUsers option from the "Where" list). Then, for each user, run this command on the server: "sudo cp -Rp /Users/username /Volumes/External/NetUsers".
5. Similarly, move Group folders in WGM (Accounts -> /LDAP... -> Groups icon on left -> select groups to move -> Group Folder tab on right -> NetGroups in the list). Then, for each group, run "sudo cp -Rp /Groups/groupname /Volumes/External/NetGroups".
6. Test to make sure all is working before deleting the old user and group folders from /Users and /Groups (do NOT delete /Users and /Groups themselves, just the individual folders from under them).

Can't change default user name on Authentication dialogs

Due to a corrupt user account, I had to create a new user account. I specified a "2" at the end of my full name i.e. "Full Name 2" because I couldn't use the same full name as the corrupt account.
I still haven't deleted the old corrupt one yet just in case I need something, however, now that I am using the new account I renamed the new account to "Full Name" without the "2" at the end of it, but for some strange reason OS X still uses "Full Name 2" on the authentication dialog boxes.
Just to summarise, I do not have an account called "Full Name 2" anymore - I've even updated the contact record - and when I get asked to authenticate via a dialog box, the name defaults to "Full Name 2".
Not sure why it's still doing this and how do I get rid of it - I just it to default to "Full Name".
At the moment I can login with both "Full Name" and "Full Name 2".
I tried deleting some preferences and re-log back in - but this didn't do the trick, but admittedly I may not have trashed the right ones.
Please help.
Thanks.

First, I create a new user account via System Preferences -> Accounts. I gave it a different account name and I entered the same full name. It rejected it saying the full name was already in use, so I renamed the full name to "Full Name 2" just to I can create the account.
Then, I logged in to the new account. Tested it, set it up how I wanted it.
Then I logged back in to the old faulty account, and renamed the full name from "Full Name" to "Full Name OLD". I did this via Accounts. I simply double clicked the old account and the edit window showed up. I just renamed the full name field.
I then edited the new account, and renamed the full name field from "Full Name 2" to "Full Name". Since the original account now had a different name, I was now able to rename the new account to the desired name, i.e. without a "2" in it.
However - now it shows a 2 in the default account name whenever I need to authenticate something.

Changing Default User Permissions between two users.

Hello,
I have two users on Mac OSX 10.7. Each of the users are members of the same group. What I need to do is make both users have the ability to read and write files to each other.
As per this article: http://support.apple.com/kb/HT2202
I went into: /etc/launchd-user.conf and set umask as 002.
I assumed that this would work. When I did, I logged off and logged back on and create a file in /tmp and found that it was still being created with 644.
Any advice?
Chris

But that will only help on the one "Disk Image".
If we have a bunch of files across different directories, etc. I want to make sure that we can both share files.
For example, I have a Users/Shared and I want every file created in that directory to be avilable to all users in that group.

User Creation in OID outside default realm

we have requirement where user in OID need to be created outside cn=users like it is under dc=com,dc=abc,ou=mycompany,cn=puneet.
This user should be configured as master administrator in OAM.Can i create this user outside cn=user?

Hi,
You can do this by changing the 'User Creation Base' under the 'Configuration' section of OIDDAS.
Change it to the new realm, and you should see users being created under the new realm.
Also, make sure the 'User/Group Search Base' and other settings are looked into when you change the 'User Creation Base'.
You can then use this user in OAM.
-- Pramod Aravind

Default users

Hi,
How to find the default users in oracle10gR2.?
I tried to find
select username,password,created from dba_users where account_status='LOCKED' OR account_status='EXPIRED';
and i have doubts about default users creation date.
Few days ago i installed oracle10g on windows,but default user creation date shows 2005... why?

Hi,
As you said the created date is 2005 right? you query the database with something like created date > '01-jan-2005' so that you can get the thing. It is a workaround but I dont see this as a permenant one.
The best way is to create the your own uses in your custom tablespace rather than the default tablespace created by the Oracle. So you can easily query the users falls on the DEFAULT_TABLESPACE column.
You can set your business requirements and can easily keep track of the users created by you.
Regards,
Vijayaraghavan K

GRC CUP - How to change SNC Name to lower case during user creation.

Hi All,
We are using GRC 5.3. CUP automatically creates user in R3 but SNC p:username'@'DOMAIN.COM is in upper case.
1. During automated user creation.
2. How change default DOMAIN.COM to lower case "domain.com"
Currently we have to manually change is via SU01 after user has been created.
Thank you
Regards,
Jacky

Sorry please ignore this thread. I got the wrong details. Post cancelled

How do you change the default User in Windows 7 on a non-RAIDed 4 disk setup?

Hi.
I have installed Windows 7 Ultimate 64bit on Darling my new machine, which has a four-disk setup without RAID, like this:
SSD OCZ -OS, Programs (C:)
WD 2002FEAX - Media Projects (D:)
WD 1002FAEX - Pagefile, Media Cache (E:)
WD 1002FAEX - Previews, Exports (F:)
This setup, and because it’s unRAIDed (four separate disks), created the User file in the OS disk, right under the Programs (x86) folder, which at times causes files, which are not programs, to automatically be saved in the User file that's in the Programs disk, when in fact Programs disk is NOT meant for storage.
Further, I cannot save stuff in My Documents because that directory leads the files (that I am saving) to the User folder in the OS disk, forcing me to navigate out of there and into an alternative disk, which is time consuming, more so than if i had a directory leading to D disk.
So, I am wondering, can anyone help me change my directory to establish the default User folder in any folder other than C?
Or, if can someone refer me to Windows 7 tutorials, resourses, that are a tad more than Dummy level.
I have heard that changing around the directory as such can mess with the OS, and though not at Dummy level, I’m quite new to PC and profusely insecure about making changes to Darling at all.
Thanks.

Hi folks.
I would like to update you about what happened regarding my wish to move the User location to another hard disk. Heeding your warning, i did NOT attempt that, but rather, moved the location of the My Documents folder in my Library, from its default place on (SSD) disk C:/ (which is the default location because that's where i installed Windows 7,) to another disk - D:/ called "Media Projects".
Here is how my directory looked before i made the change, my three hard disks were outside the Library directory that's on my SSD (Programs disk):
(I did that by right-clicking the My Documents folder in the left column of a browser window, to access the Location tab.)
What this did is, it put driver D:/ under Documents, which is under Library, see picture, which now enables saving documents quickly, by going from my Library directly to my D drive, however it eliminated the "My Documents" folder/possibility all together from the left-column list of folders in the Windows Explorer browser pane.
I am now trying to do the same with Music, Pictures, and Videos, i.e. to move them to D drive, but am unable to do so because right-clicking those icons in the directory does not produce the Location tab in Properties panel, and nor does right-clicking inside the files themselves.
Similarly, right-clicking Downloads, which i also want to have residing in my D drive, does NOT produce a Location tab in properties pane, though it does seem possible to change the directory manually...see picture.....but am wary....
I am still monitoring my new system, and will see if and how this change effects my system's performance.
Thanks.

Powershell Script to change the default user Account picture for all users in windows 7 and 8

Hello,
Can some sone help me with PS script to change user account pictures of all user account in windows 7 and windows 8 ?
I will deploy this through MDT TS as Custom TS after OSD.
Shailendra
Shailendra Dev

Hello,
Can some sone help me with PS script to change user account pictures of all user account in windows 7 and windows 8 ?
I will deploy this through MDT TS as Custom TS after OSD.
Shailendra
Shailendra Dev
The default user account picture is stored here.
C:\programdata\Microsoft\User Account Pictures\user.bmp
It should just be a matter have copying the picture you want to that location and over writing what is there.
or....
Computer Configuration\Administrative Templates\Control Panel\User Accounts\Apply the default user logon picture to all users
You can also configure this by a registry setting;
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\Explorer]
UseDefaultTile = 1
The picture that you configure, will not be loaded until the user account will actually be created on the pc. Meaning the first time a >new< user will log on to a pc, they will have no picture shown at all using their login screen (this is default
behavior). Same will occur if you enable the policy don't display last user name. However, once they log in the picture will be shown in the start menu, and if they lock their pc the image will also be shown

Please advice process change in Solution Manger user creation

Hello All,
We have like 5 systems linked to Solution manager now.
We are trying to make some improvements in our daily activities by reducing / eliminating few steps. In our current scenario, users are LDAP authenticated, so we run a query (RSLDAPSYNC_USER) and create a user. Then assign the roles in SU01.
So, is it possible to have user creation (by LDAP authentication - RSLDAPSYNC_USER) and role assignment in a single step?
Or
Can you create a user group for each type of user and have any automated jobs for automatically assigning roles to the users of that user group?
We can use su10 for assigning roles in case of more users, but i am looking for some more options.
Thanks in advance.
Muzammil

Hello Miguel,
We are using solution manager for user maintenance.
If any internal user requests for SAP application access we give it via solution manage. Solution manager is again connected to our LDAP server and pick the details from LDAP by running a query.
During this user creation process we have some default roles which are supposed to be given to all the users related to one particular system. Lets say SRM users, if we are creating any SRM users then we have to give the default roles to all the users we created.
So, is it possible to have these default roles assigned automatically when i create?
Thanks in advance.

Change Default User Creation OU in Unity 7.x

Similar Messages

Maybe you are looking for