Change logical component for upgraded satellite

Hello.
After upgrading a satellite system from 4.6C to ECC6, I would like to to change the Logical component in SMSY accordingly. But cannot find an easy way to do that. I would like to keep the actual monitor, alert and reactions configuration in the current solution, and just update the Logical Component.
Actually I am afraid that I have to cancel the system, and recreate it under the new component missing all the settings.
Does anybody know if there is a non destructive way? I'm working with a 3.2 Solman.
Thanks a lot, kind regards,
Dino

Try manually setting it, or change the leading product from R/3 to ECC

Similar Messages

How to change material component for a Purchase Order?

How to change material component for a Purchase Order?
I need FM .
PLEASE help

Dear ,
Create PO with item category L....There in Item detail you will get tab for material.
There click in component Button, it will take you to the component screen there you can assign and deassign components.
Hope this helps.
Regards
Utsav

Logical Component for HANA DB system

Hi Friends,
I am doing Managed System Configuration for HANA DB system.
I have created Logical Component for the same, but I am unable to put it in Solution(in SMSY).
Can some one suggest.
Thanks & Regards,
Solman Starter

Hi,
What is the error you are getting ?
What your solution manger version and SP level ?
Check below note and see if they help.
1958910 - EarlyWatch Alert For HANA Database
Regards

Where to download PeopleSoft Change Assistant Template for Upgrade ?

Folks,
Hello. I am upgrading PeopleTools 8.49 to 8.50.
After configure Change Assistant 8.50, we need to download a specific Change Assistant template for upgrade process. I cannot find where to download it.
Can any folks provide a link to download PeopleSoft Change Assistant template for upgrade PeopleTools 8.49 to 8.50 ?
Thanks.

Hi,
You have to be a customer with a current maintenance agreement to have valid access to My Oracle Support (http://support.oracle.com) and the upgrade documentation and templates.
Current customers who share documents and information from My Oracle Support with non maintenance customers, and others, may be in breach of their license agreement with Oracle.
For reference:
"... This software and related documentation are provided under a license agreement containing restrictions on use and disclosure and are protected by intellectual property laws. Except as expressly permitted in your license agreement or allowed by law, you may not use, copy, reproduce, translate, broadcast,modify, license, transmit, distribute, exhibit, perform, publish or display any part, in any form, or by anymeans. Reverse engineering, disassembly, or decompilation of this software, unless required by law for interoperability, is prohibited"
regards
Greg

Solution Manager - Logical Component for SAP Netweaver EHP2

Hello,
I installed the newest SAP Netweaver Ehp2 (with usage type AS ABAP only) for a future integrating with BI_CONT (SAP BI requirement). So... what I want to know is... I want to do an update of support packages to the latest Stack (SPS) and in this product version (NW EHP2) the latest stack is stack 06 !! But I ´m facing with a problem which is, because I have to maintain this system in Solution Manager (for Maintenance Optimizer activity)...so what I want is configure this new system on Solution Manager Ehp1 (with SPS 23) but in tcode SMSY I didn´t found this Product in Logical Components for I can apply this system to my Solution... I only see SAP Netweaver with EHP1 and not with EHP2 which is the version that I want to apply this new system. (This is mandatory task, because without it, I will not be able to download the support packages for NW 7.0 EHP2)
Tell me two things... first if this level version of Solution Manager that I have here (SPS 23) have this product in logical components, and two... if not it, is necessary to raise the level of Solution Manager support packages (to latest stack SPS 25) for I can see that logical component SAP Netweaver EHP2?!
Thank you very much
João Dimas - Portugal

Hi João,
You can verify if the EHP2 is available (if) in your system, this can be done once you are in SMSY -> Product Definitions -> SAP Netweaver where you should able to see the EHP2. If so, then it's a matter of marking the leading Product & Product Version under the Header Data ->Change Product Assignment where you can use the drop down arrow to select the Product and Product Version. If it's not available, then by checking the 'Free Product / Select Product Version' then use the drop down arrow to select the product & Product Version, once you selected that then click on copy and mark that as active and save.
Then you need to create a new logical component in System Group & logical Component under SAP Netweaver, then assign the system to the logical component. Once this is done you can use the logical component in a solution and create a maintenance transaction.
I hope this help you to proceed further, thanks.
Jay Soma.

Logical Component after upgrade

Hi,
I have slight confusion.
We upgraded our SCM system from SCM 7.0 to SCM 7.01 (Ehp1). now our product version is "EHP1 FOR SAP SCM 7.0"
and Product instance is "SAP SCM ENHANCE PACKAGE"
in logical component which is used in Charm and monitoring.
following are the current details
logical componenet: Z_SCM
Product/Prod. Instance SAP SCM [SCM Server]
product version: SAP SCM 7.0
Now i want the correct assignment of logical component which includes product version and product instance.
How do I get same logical component name with new product instance, so that my charm and monitoring is not affected.
Its same case for PI. from SAP netweaver PI(7.11) to SAP Netweaver (7.3)
BR,
Shyam

Hello Shyam,
Sorry, you are correct, the logical template needs to be copied from a system group and SAP SCM 7.0 and SAP SCM 7.0 EHP
are in different system groups, and you won't be able to pick up your SCM 7.0 systems in the SCM 7.0 EHP logical.
What might be possible, and I don't know if it would be practical is to retire Logical Z_SCM that was based on SCM 7.0, and by retire I mean remove, and then create the same nameed Logical Z_SCM but copied from the template of SCM 7.0 EHP, then you could see your SCM 7.0 EHP systems and pull them into the new logical Z_SCM and add that back to the solution.
I have not tried this, but if you have a test environment you could try this to see. Logically it should work. Its certainly something you could prove or disprove on a test system.
Regards,
Paul

Setting Logical component for Test Case.

Hello,
I've created test case in SOLAR02 and I want to link my test case to Quality Assurance in my logical component (SAP ECC).How can i set this link? Now the test cases are link to Developement system in SAP ECC. Please tell me how can i fix it.

Hi,
If you want to perform the testing in QA client, set your system role as "Quality system" in STWB_2 transaction.
By default, the system role has to come as "Quality system".
If it is not check your transport route of the logical component in t.code SMSY.
Regards
Senthil

SMSY Logical Component for Event Manager

Hello,
We have Event Manger 7.0 installed into a stand-alone SCM 7.0 system. When trying to set this up in SMSY, the only options given for setting up the Logical System is to associate with with EHP3 or EHP4 for in ECC 6.0.
Obviously we have not installed EM into ECC. So where are the other appropriate entries in SMSY for recognizing that EM is installed in SCM?
Solman is patched to EHP1 SP6. Is there some content update which we need to download to get new components into SMSY?
Thanks,
John

We have Event Manger 7.0 installed into a stand-alone SCM 7.0 system. When trying to set this up in SMSY, the only options given for setting up the Logical System is to associate with with EHP3 or EHP4 for in ECC 6.0.
Obviously we have not installed EM into ECC. So where are the other appropriate entries in SMSY for recognizing that EM is installed in SCM?
1) This system must be maintained as SCM 7.0 in SMSY and not as SAP ERP 6.0 or EHPX for SAP ERP 6.0, this is the reason as you can see this system SCM 7.0 can be assigned just to SAP ERP 6.0 or EHPX for SAP ERP 6.0.
2) There's no Main Instance available to be selected when you have a SAP SCM 7.0. You must select one or more of the following main instances below.
BI Content
SCM Server
cFolders on SCM Server
GEOCODING
Portal Content
SAP LiveCache
SAP NW - Adobe Docu. Service
SCM Optimizer
SCM WCL
XI Content
These are the main instances available to SCM 7.0

Understanding and using Logical Components for Managed System configuration

Experts.....
I am embarking on a fresh installation of SolMan 7 EhP1 SPS25 and after a few bugs along the way, I am finally nearing the end of including the first Managed System. Somewhat related to {forum:id=10293771] I am hoping I can get some advice, but specifically with regards to Logical Components.
General question - I have a slide from SAP that shows a picture from Product->System->Instance->Logical System (client)->Logical Component. I am confused because it shows that Client 100 of a given ABAP system could be assigned to Logical Component A, whereas Client 200 of the same system could be assigned to Logical Component B. This seems wrong to me?
I am at the last step of the managed systems configuration wizard : "create logical components" and only want to ensure that I set things up to hopefully ensure that later usages (Maintenance Optimizer, etc) will handle things correctly!!!
- Our SAP landscape is not very complex
1. only ERP and EP (Dev/Test/Prod).
2. We are utilizing HR Self Service (XSS).
3. The ERP ABAP systems are on Netweaver 7.01.
4. EhP4 has been installed, however we only activated the HCM business functions. Therefore SAP_HR is on 604 whereas SAP_APPL is on 600. I think this might be driving some of the confusion in SMSY
For the DEV ABAP system I am trying to configure:
1. The system is showing up in two products : "SAP ERP" and "SAP ERP Enhancement Package" with the header data for both showing "EHP4 FOR SAP ERP 6.0 / NW7.01" and "SAP ERP 6.0"
2. Under "SAP ERP" the "product instance selection" shows only "SAP NW - Adobe Docu. Service" and "SAP ECC Server" as relevant
3. Under ""SAP ERP Enhancement Package" the "product instance selection" shows only "Human Capital Mgmt" as relevant by default. I manually flagged the development portal system as "relevant" for "SAP XSS (Self Services)"
4. The RCA DBA Cockpit system is complaining "No data available for extractor activation. Please check product mapping and Software Components in SMSY"
5. In the Managed System wizard, there is no logical component for any of the "EHP4 FOR SAP ERP 6.0 / NW7.01" selections
From what I can tell, I think this is correct:
1. Create a Z_EHP4 logical component and assign the DEV/QAS/PRD systems to them
2. Also assign the DEV/QAS/PRD to the existing SAP logical component "SAP ERP ECC SERVER"???
3. For the Solutions, my plan is to create
a. Non-Production ERP : with the dev/test erp/ep systems, but test system as the leading system
b. Production ERP with the prod erp/ep systems only
Thanks for any advice/guidance to help me avoid future problems!!
Edited by: Eric Poellinger on Jun 15, 2011 6:32 PM

General question - I have a slide from SAP that shows a picture from Product->System->Instance->Logical System (client)->Logical Component. I am confused because it shows that Client 100 of a given ABAP system could be assigned to Logical Component A, whereas Client 200 of the same system could be assigned to Logical Component B. This seems wrong to me?
Client 100 could be assigned to any number of logical components, client 200 could be assigned to those same ones or none of them. A logical component is just a grouping of systems used to accomplish some task in SolMan.
For example with ChaRM you could have 2 logical components.
ZCHARM_DEV development (100) -> QA (200) -> prod (300)
ZCHARM_SEC security (900) -> QA (200) -> prod(300)
One is used to show the path for moving development changes to prod, the other for security changes. 200 belongs to both, but 100 only to one.
Set them up in whatever way meets you needs. It looks like for you, you could just use the default one and assign your clients to the various system roles. Not all functionality in SolMan uses the logical components though.

Logical Component & IMG

Dear All,
I am using a logical component for global configuration. When selecting this LC in a implementation project all the required IMG nodes are showing up. But when using the same logical component for template project a certain node is not showing up?
I will really appreciate the answer.
Sincerely.

Hi Andreas,
Thanks for your reply. Please let me know how can I change the menu configuration?
Sincerely,

Logical Components for a project

Hi,
We have ECC6.0 on which we have applied the Enhancement Package 2.0.
While trying to create a project in solution manager for the Business Sceario we selected it is requiring Logical component for SAP ERP Enhance Package.
While trying to create the SAP ERP Enhance Package logical component we are not able to find any systems to attach under that even though we have maintained installed product versions as both SAP ECC / SAP ERP ENHANCE PACKAGE 2005.2. in the system defintion of our development system.
We tried to put SAP ERP ENHANCE PACKAGE 2005.2 as leading product version even then we are not able to pickup that system under the SAP Enhance package Logical component.
Please suggest.
Thanks & Regards
Mrutyunjay

Hi,
In SMSY under landscape components select your system and go to Header Data Tab. Click on Installed Product version. Then select the check box Free Product/Select product Version.
Then you can find your product there. This will solve your problem.
Feel free to revert back.
--Ragu

Creating Logical Component in Solman 7.1

Hi,
I want to create a Logical component for my SAP ECC managed system, could you please let me knowhow to create it.
OR is there any standard SAP document available on how to create Logical component in Solman 7.1 SP10.
Regards
P Kumar

hI kUMAR,
Check in SOLMAN 7.1 master guide which is available in SAP marketplace.
You can try below for creating logical component in SOLMAN:
1)Make sure that managed system has correct details in LMDB (like product components,version...etc)
2)Go to SMSY-->click on logical components in left hand side-->search for your product version i.e ERP 6.0 or Netweaver 7.0 or SCM etc.
3)Expand ERP 6.0 (in ur case)-->right click -->create logical system-->Give logical system name and version details-->Save
4)After that select systems i.e Dev system ,QUA system,PROD system of your ECC ,Then save
Thanks,
Prakash

Satellite S3000: how to change a component on the motherboard?

How do you open the case of this laptop/notebook?
I need to change a component on the motherboard.
I get to the stage where all the screws on the base are off, and it seems like all that remains for access into the casing for the 'system board' motherboard is that MAYBE the strip on the front, just below the screen, should be removed.
Is this so? What do I need to do at this stage?
It's urgent that I get to do this in the next few hours.

I dont know what components you want to change on the motherboard but I dont think that its a good idea. :O
However, I dont think that you will find any officials manual how to do anything on this unit. I think only the service partner can receive such documents.
I have found in the net this site:
http://www.irisvista.com/tech/laptops/Toshiba-Satellite-1200/take-apart-laptop-1.htm
It describes how to open and remove all parts from the Satellite 1200. I know its not a Sat 3000 but you can detect roughly how to do it.
But you know if you have not experience you shouldnt do or remove anything ;)

Re: Memory upgrade for a Satellite 1800-921 PIII 1.1GHz...

I am trying to find out the memory upgrade for my Satellite 1800-921 PIII 1.1GHz... Part Number : PS183E-00HTT-EN .
It currently has a Nanya 256MB SDR-133 Mhz-CL3 & I undestand it can be upgraded with an additional 256Mb card.
The only problem is I cant seem to find one compatible! Any ideas what is require & where I could get it from?

Hello
The compatible module is PC100 256MB with part number PA3069U-1M25.

No monitors pulled for self defined logical component

Hi,
I have defined a system landscape in smsy and created solution landscapes in the sm. For some systems I had to create a new logical component.
My problem: Although RFC destinations work fine, for all systems within the new logical component no monitors are pulled out of rz20.
If I use a SAP-defined logical component it works.
I use Solution Manager 3.2.
Is there any documentation for this problem or does anybody know a solution for this?
Thank you and best regards,
Tim

Hi again,
I thought about the problem and tried several things. The problem is not the self defined logical component. The problem is the product definition. I can`t monitor systems, which I created as product SAP ERP in smsy. The check "SAP System ..." doesn`t appear when I want to setup System Monitoring.
Does anybody have an idea what I do wrong?
Regards,
Tim

Change logical component for upgraded satellite

Similar Messages

Maybe you are looking for