SMSY Logical Component for Event Manager

Hello,
We have Event Manger 7.0 installed into a stand-alone SCM 7.0 system.  When trying to set this up in SMSY, the only options given for setting up the Logical System is to associate with with EHP3 or EHP4 for in ECC 6.0.
Obviously we have not installed EM into ECC.  So where are the other appropriate entries in SMSY for recognizing that EM is installed in SCM?
Solman is patched to EHP1 SP6.  Is there some content update which we need to download to get new components into SMSY?
Thanks,
John

We have Event Manger 7.0 installed into a stand-alone SCM 7.0 system. When trying to set this up in SMSY, the only options given for setting up the Logical System is to associate with with EHP3 or EHP4 for in ECC 6.0.
Obviously we have not installed EM into ECC. So where are the other appropriate entries in SMSY for recognizing that EM is installed in SCM?
1) This system must be maintained as SCM 7.0 in SMSY and not as SAP ERP 6.0 or EHPX for SAP ERP 6.0, this is the reason as you can see this system SCM 7.0 can be assigned just to SAP ERP 6.0 or EHPX for SAP ERP 6.0.
2) There's no Main Instance available to be selected when you have a SAP SCM 7.0. You must select one or more of the following main instances below.
BI Content
SCM Server
cFolders on SCM Server
GEOCODING
Portal Content
SAP LiveCache
SAP NW - Adobe Docu. Service
SCM Optimizer
SCM WCL
XI Content
These are the main instances available to SCM 7.0

Similar Messages

  • Logical Component for HANA DB system

    Hi Friends,
    I am doing Managed System Configuration for HANA DB system.
    I have created Logical Component for the same, but I am unable to put it in Solution(in SMSY).
    Can some one suggest.
    Thanks & Regards,
    Solman Starter

    Hi,
    What is the error you are getting ?
    What your solution manger version and SP level ?
    Check below note and see if they help.
    1958910 - EarlyWatch Alert For HANA Database
    Regards

  • Solution Manager - Logical Component for SAP Netweaver EHP2

    Hello,
    I installed the newest SAP Netweaver Ehp2 (with usage type AS ABAP only) for a future integrating with BI_CONT (SAP BI requirement). So... what I want to know is... I want to do an update of support packages to the latest Stack (SPS) and in this product version (NW EHP2) the latest stack is stack 06 !! But I ´m facing with a problem which is, because I have to maintain this system in Solution Manager (for Maintenance Optimizer activity)...so what I want is configure this new system on Solution Manager Ehp1 (with SPS 23) but in tcode SMSY I didn´t found this Product in Logical Components for I can apply this system to my Solution... I only see SAP Netweaver with EHP1 and not with EHP2 which is the version that I want to apply this new system. (This is mandatory task, because without it, I will not be able to download the support packages for NW 7.0 EHP2)
    Tell me two things... first if this level version of Solution Manager that I have here (SPS 23) have this product in logical components, and two... if not it, is necessary to raise the level of Solution Manager support packages (to latest stack SPS 25) for I can see that logical component SAP Netweaver EHP2?!
    Thank you very much
    João Dimas - Portugal

    Hi João,
    You can verify if the EHP2 is available (if) in your system, this can be done once you are in SMSY -> Product Definitions -> SAP Netweaver where you should able to see the EHP2. If so, then it's a matter of marking the leading Product & Product Version under the Header Data ->Change Product Assignment where you can use the drop down arrow to select the Product and Product Version. If it's not available, then by checking the 'Free Product / Select Product Version' then use the drop down arrow to select the product & Product Version, once you selected that then click on copy and mark that as active and save.
    Then you need to create a new logical component in System Group & logical Component under SAP Netweaver, then assign the system to the logical component. Once this is done you can use the logical component in a solution and create a maintenance transaction.
    I hope this help you to proceed further, thanks.
    Jay Soma.

  • Smsy logical component

    Hi,
    I am trying to configure maintenance optimizer .
    1. How I can define the logical system ?
    2. how to define client in logical system ?
    3. how to delete logical system if it is wrongly define ?
    4. I have gone through so many mopz doc but big cofusion to configure smsy . pl. help .
    if you hava any thing step by step . it will be greate help .
    5. how i can confirm that now maintenance optimizer is configured and working perfectly ?
    pl. suggest .

    1.Adding SAP-systems to abap stack of solution manager
       a.t-code SMSY-->Ladscape Components(add server document,database document,SAP-system document)
      b.Generate RFC destination for user for READ ACCESS and CHANGE manager from solution manager to SAP-system you have added
    2.Publishing solution
    a.t-code DSWP -->Create Solution
    b.Create logical system and assign to project in SMSY-->System group and Logical component
    Regards
    Ganesh

  • XI 3.0 and BW 3.5 system type/logical component in Solution Manager

    We are in the process of performing an upgrade for ERP 2004, XI 3.0 and BW 3.5. Initially this is being done in the sandpits. All systems are configured and connected our Solution Manager to download the packages.
    We are unable to determine what type of system the XI 3.0 and BW 3.5 should be configured under. For example, previously we had an issue where ERP was configured as ECC 5.0 rather than ERP 2004. This was causing an issue in MOPZ where the upgrade option wasn't visible in a maintenance transaction. The same issue is now happening for XI and BW.
    Please advise on the system type (logical component to use) for XI 3.0 and BW 3.5 in Solution Manager as SAP have made it very confusing. Currently both are under type Netweaver 04.
    Regards,
    -Rohan

    Hi
    I believe that SAP hasn't upgrade option for BW 3.5, Check link:
    https://service.sap.com/solman-mopz
    Upgrade
    a "straight" upgrade for SAP Business Suite (upgrade from SAP ERP 2004 to SAP ERP 6.0, for example) is not supported by Maintenance Optimizer
    Upgrade with an Installation of an Enhancement Package is supported for SAP ERP, SAP SCM, SAP SRM and SAP CRM
    Regards
    William Neira

  • Setting Logical component for Test Case.

    Hello,
                I've created test case in SOLAR02 and I want to link my test case to Quality Assurance in my logical component (SAP ECC).How can i set this link? Now the test cases  are link to Developement system in SAP ECC. Please tell me how can i fix it.

    Hi,
       If you want to perform the testing in QA client, set your system role as "Quality system" in STWB_2 transaction.
    By default, the system role has to come as "Quality system".
    If it is not check your transport route of the logical component in t.code SMSY.
    Regards
    Senthil

  • Change logical component  for upgraded satellite

    Hello.
    After upgrading a satellite system from 4.6C to ECC6, I would like to to change the Logical component in SMSY accordingly. But cannot find an easy way to do that. I would like to keep the actual monitor, alert and reactions configuration in the current solution, and just update the Logical Component.
    Actually I am afraid that I have to cancel the system, and recreate it under the new component missing all the settings.
    Does anybody know if there is a non destructive way? I'm working with a 3.2 Solman.
    Thanks a lot, kind regards,
    Dino

    Try manually setting it, or change the leading product from R/3 to ECC

  • SMSY//Logical component definition - multiple roles for one system?

    Dear all,
    as our client has a divided system landscape (three-tier operational line as well as two-tier development line) some systems have more than one role to fill. The development system on development line is source system for all developments, as well as post-processing system for retrofit purpose from operational line. The maintenance system on operational line is target system for developments from development line, as well as source system for maintenance activities on operational line.
    --> What are the consequences of assigning multiple roles to one system?
    --> Is there anonther option than assigning multiple roles?
    Best regards
    Nick

    We have Event Manger 7.0 installed into a stand-alone SCM 7.0 system. When trying to set this up in SMSY, the only options given for setting up the Logical System is to associate with with EHP3 or EHP4 for in ECC 6.0.
    Obviously we have not installed EM into ECC. So where are the other appropriate entries in SMSY for recognizing that EM is installed in SCM?
    1) This system must be maintained as SCM 7.0 in SMSY and not as SAP ERP 6.0 or EHPX for SAP ERP 6.0, this is the reason as you can see this system SCM 7.0 can be assigned just to SAP ERP 6.0 or EHPX for SAP ERP 6.0.
    2) There's no Main Instance available to be selected when you have a SAP SCM 7.0. You must select one or more of the following main instances below.
    BI Content
    SCM Server
    cFolders on SCM Server
    GEOCODING
    Portal Content
    SAP LiveCache
    SAP NW - Adobe Docu. Service
    SCM Optimizer
    SCM WCL
    XI Content
    These are the main instances available to SCM 7.0

  • Understanding and using Logical Components for Managed System configuration

    Experts.....
    I am embarking on a fresh installation of SolMan 7 EhP1 SPS25 and after a few bugs along the way, I am finally nearing the end of including the first Managed System.  Somewhat related to {forum:id=10293771] I am hoping I can get some advice, but specifically with regards to Logical Components.
    General question - I have a slide from SAP that shows a picture from Product->System->Instance->Logical System (client)->Logical Component.  I am confused because it shows that Client 100 of a given ABAP system could be assigned to Logical Component A, whereas Client 200 of the same system could be assigned to Logical Component B.  This seems wrong to me?
    I am at the last step of the managed systems configuration wizard : "create logical components" and only want to ensure that I set things up to hopefully ensure that later usages (Maintenance Optimizer, etc) will handle things correctly!!!
    - Our SAP landscape is not very complex
    1. only ERP and EP (Dev/Test/Prod). 
    2. We are utilizing HR Self Service (XSS).
    3. The ERP ABAP systems are on Netweaver 7.01. 
    4. EhP4 has been installed, however we only activated the HCM business functions.  Therefore SAP_HR is on 604 whereas SAP_APPL is on 600.  I think this might be driving some of the confusion in SMSY
    For the DEV ABAP system I am trying to configure:
    1. The system is showing up in two products : "SAP ERP" and "SAP ERP Enhancement Package" with the header data for both showing "EHP4 FOR SAP ERP 6.0 / NW7.01" and "SAP ERP 6.0"
    2. Under "SAP ERP" the "product instance selection" shows only "SAP NW - Adobe Docu. Service" and "SAP ECC Server" as relevant
    3. Under ""SAP ERP Enhancement Package" the "product instance selection" shows only "Human Capital Mgmt" as relevant by default.  I manually flagged the development portal system as "relevant" for "SAP XSS (Self Services)"
    4. The RCA DBA Cockpit system is complaining "No data available for extractor activation. Please check product mapping and Software Components in SMSY"
    5. In the Managed System wizard, there is no logical component for any of the "EHP4 FOR SAP ERP 6.0 / NW7.01" selections
    From what I can tell, I think this is correct:
    1. Create a Z_EHP4 logical component and assign the DEV/QAS/PRD systems to them
    2. Also assign the DEV/QAS/PRD to the existing SAP logical component "SAP ERP ECC SERVER"???
    3. For the Solutions, my plan is to create
    a. Non-Production ERP : with the dev/test erp/ep systems, but test system as the leading system
    b. Production ERP with the prod erp/ep systems only
    Thanks for any advice/guidance to help me avoid future problems!!
    Edited by: Eric Poellinger on Jun 15, 2011 6:32 PM

    General question - I have a slide from SAP that shows a picture from Product->System->Instance->Logical System (client)->Logical Component. I am confused because it shows that Client 100 of a given ABAP system could be assigned to Logical Component A, whereas Client 200 of the same system could be assigned to Logical Component B. This seems wrong to me?
    Client 100 could be assigned to any number of logical components, client 200 could be assigned to those same ones or none of them. A logical component is just a grouping of systems used to accomplish some task in SolMan.
    For example with ChaRM you could have 2 logical components.
    ZCHARM_DEV development (100) -> QA (200) -> prod (300)
    ZCHARM_SEC security (900) -> QA (200) -> prod(300)
    One is used to show the path for moving development changes to prod, the other for security changes. 200 belongs to both, but 100 only to one.
    Set them up in whatever way meets you needs. It looks like for you, you could just use the default one and assign your clients to the various system roles. Not all functionality in SolMan uses the logical components though.

  • How To create a maintenance project - logical component missing?

    Hi experts,
    we plan to activate ChaRM in our Landscape.
    We don't have created a maintenance project in solution_manager cause there is a logical component missing.
    I followed the instructions of the tutorial on  https://websmp206.sap-ag.de/~sapidb/011000358700006932702005E.sim (Creation of a maintenance project).
    I recognized there is the logical component "ZCHANGE REQUEST MANAGEMENT" missing.
    This seems to be a modified origin SAP Component.
    Does anyone know where to find these component?
    Maybe with informations what has to be changed for the Z*copy or is this only a 1:1 copy?
    Does anyone have a detailed document for configuring ChaRM on SolMan 7.0 (Mailadress is visible on my business card)
    thanks in advance
    kind regards
    Thomas
    Helpful answers/documents will be rewarded, surely!

    You need to set up your solution and therefor define a logical component in SMSY. For instance the logical component might consist of your ERP E, Q and P systems.
    This logical component is added to an SMI Project. It basically tells the SMI project which systems are involved in the process. After that you will have to create an IMG project, CTS project, release the SMI project to the Change Request Management and generate Maintenance Cycle and Task List (this is all being done in SOLAR_PROJECT_ADMIN).
    /cheers

  • Logical Components for a project

    Hi,
    We have ECC6.0 on which we have applied the Enhancement Package 2.0.
    While trying to create a project in solution manager for the Business Sceario we selected it is requiring Logical component for SAP ERP Enhance Package.
    While trying to create the SAP ERP Enhance Package logical component we are not able to find any systems to attach under that even though we have maintained installed product versions as both  SAP ECC / SAP ERP ENHANCE PACKAGE 2005.2. in the system defintion of our development system.
    We tried to put SAP ERP ENHANCE PACKAGE 2005.2 as leading product version even then we are not able to pickup that system under the SAP Enhance package Logical component.
    Please suggest.
    Thanks & Regards
    Mrutyunjay

    Hi,
    In SMSY under landscape components select your system and go to Header Data Tab. Click on Installed Product version. Then select the check box Free Product/Select product Version.
    Then you can find your product there. This will solve your problem.
    Feel free to revert back.
    --Ragu

  • Creating Logical Component in Solman 7.1

    Hi,
    I want to create a Logical component for my SAP ECC managed system, could you please let me knowhow to create it.
    OR is there any standard SAP document available on how to create Logical component in Solman 7.1 SP10.
    Regards
    P Kumar

    hI kUMAR,
    Check in SOLMAN 7.1 master guide which is available in SAP marketplace.
    You can try below for creating logical component in SOLMAN:
    1)Make sure that managed system has correct details in LMDB (like product components,version...etc)
    2)Go to SMSY-->click on logical components in left hand side-->search for your product version i.e ERP 6.0 or Netweaver 7.0 or SCM etc.
    3)Expand ERP 6.0 (in ur case)-->right click -->create logical system-->Give logical system name and version details-->Save
    4)After that select systems i.e Dev system ,QUA system,PROD system of your ECC ,Then save
    Thanks,
    Prakash

  • Multiple logical components for a single step in Business Process Structure

    Question 2 of 3:
    I'd like to hear about how other people have handled Portals transactions and similar items. I.e. when building the Business Blueprint or Business Process Structure, what if a single transaction runs on more than one product or logical component? Solution Manager only allows you to assign one logical component to a process step and transaction in the Business Blueprint Structure. This isn't the ideal solution, since you lose the linear affect of the what transactions take place for the step.
    Your insights and opinions are appreciated.
    Regards,
    Marcel

    Hi Marcel,
    an ABAP transaction can only run or at least be started on one single system. A portal transaction can be assigned using a URL. This doesn't need any logical component.
    Regards
    Andreas

  • Move Logical component to another system group

    I want to move an logical component which I have made under SAP ECC -> SAP ECC Server to SAP ERP ->SAP ECC Server under SMSY / Logical component. (because of the product version to install EHP4)
    How do you do that?

    you want to create the logical component, with a different product version. right?.
    Please try to change the Product version. Or you have to create a new logical component with the correct product definition and include it to the solution. for this you have to have your system defined under ERP systems.
    Thanks,
    Jagan

  • Appraisals & training and event management problem

    Hi gurus.
    I'm trying to configured the integration between Appraisal and Training & Event management (Appraising a Business Event and Attendee Appraisal
    I set an attribute HAP00 REPLA = A .
    But two problems occurred.
    1.
    The definition of Appraisal catalog for employees is no problem. But I have a problem with definition of Appraisal catalog for Business event and for Attendees.
    Through the definition of Appraisal catalog via SPRO (Training and Event Management/Recurring Activities/Appraisals/Edit Appraisals Catalog) its possible to create an appraisal templates only for employees (it looks like that, because there is only Category group Personnel Appraisals and it’s not possible to add new category for example Attendee Appraisal).
    Can somebody help me where I can define appraisal templates for Event management or how can I get the Appraisal catalog category groups - Appraising a Business Event and Attendee Appraisal?
    2.
    I set the attributes SEMIN EVAEV/EVAPA to the values 2/3 in connection with table T77BF.
    When I run tcode PV33 or PV34 the matchcode of appraisal templates contains the list of all object type VA. The problem is that when I run tcode PV33 I don’t want to see all appraisal templates, but only for appraising a Business Event.
    It is possible to configure that so? If yes, how.
    Thanks in advance.
    Regards

    Hi,
    1. transaction LSO_CATALOG
    Regards and Groetjes,
    Maurice Hagen

Maybe you are looking for