Change Mamp MYSQL password?

I use the normal command line and i get this message...help
error: 'Access denied for user 'root'@'localhost' (using password: YES)'

I was struggleing with this too, the error is as follows:
/Applications/MAMP/Library/bin/mysqladmin -u root -p password <NEWPASSWORD>
In the above I was replacing the password with my password, thats wrong, copy and paste the following into terminal exactly as is, change nothing:
/Applications/MAMP/Library/bin/mysqladmin -u root -p password
now at the end, after the word "password" type your new password then press enter.
Now you will be prompted for the current password, type 'root' without the quotes.
You should be good to go!
My, and many others interpretation of the instructions within MAMP makes you think you replace 'password' with your current password, then replace <NEWPASSWORD> with the new one, wrong.
Hope this helps!!

Similar Messages

Changing Root MySQL Password - Possible?

Due to the departure of a former employee, we have need to change the root password for MySQL operating in OS X Apache on a Mac G4 tower. When we change the root password now for MySQL it seems to stop communicating with websites on the server which rely on it, even though each user database has its own unique user and password information. Are we hosed, or is it possible to change the root MySQL password in an environment where several websites on the server are already using databases within the MySQL set up?
This is a great a valuable forum, I welcome any and all comments. TIA!

It should be possible to change the root password. If you have problems accessing the database afterwards then it sounds like your applications aren't using the usernames and passwords that were created for them.
If the apps are, indeed, using the root password this is something you should change. You'll need to check the apps' configurations and various logs to find out what they're using.
In addition, if you haven't already done so, check out NaviCat. It's a GUI front-end for administering MySQL. While I don't use it at all for table management, it's front-end for managing users and permissions is way ahead of the command line.

Mysql password change

10.5 server offers the ability to change the root password on the mysql database from within the UI. While this is a welcome change it doesn't work for me. I am running this on a test box so not live or in any dire need but has anyone else run in to this issue? The instance of mysql works fine and can change the password from terminal just fine. Curious a fresh install, no upgrade, with the default mysql version which ships this doesn't work.

I was struggleing with this too, the error is as follows:
/Applications/MAMP/Library/bin/mysqladmin -u root -p password <NEWPASSWORD>
In the above I was replacing the password with my password, thats wrong, copy and paste the following into terminal exactly as is, change nothing:
/Applications/MAMP/Library/bin/mysqladmin -u root -p password
now at the end, after the word "password" type your new password then press enter.
Now you will be prompted for the current password, type 'root' without the quotes.
You should be good to go!
My, and many others interpretation of the instructions within MAMP makes you think you replace 'password' with your current password, then replace <NEWPASSWORD> with the new one, wrong.
Hope this helps!!

Forgotten BOE and Mysql passwords

Hi,
We used to run BOE XI 3.1 on Windows server 2003.
The system hasnt been used in about 2 years, and we now need to revive it. But we have no recollection of the usernames\passwords for any of it.
I've managed to reset the Mysql password, and reset the password for BOE(Like ive read in other forums), but this has resulted in not being able to access the CMC - the page dosnt show up. Im assuming because BOE wont be able to connect to the db, because of the new password.
Is there any way to change the Mysql connection settings for BOE?
Regards,

Hi Jeff,
Thanks for the quick reply.
Managed to resolve it:
Had to go into the Central Configuration Manager... Click on properties... Then the configuration tab... then click on specifiy - It allowed me to specify the new password there.
Regards,

MySQL Manager, cannot set MySQL password in order to connect...

I just installed the default MySQL files for the MySQL server (v4.1.13a) included with Tiger Server (v10.4.3). I was connected to the server remotely with Remote Desktop. I checked the box to allow network connections, and then briefly lost connection to the server via Remote Desktop as I was entering the password in the verify password field. Once I reestablished a connection to the server via Remote Desktop, all seemed okay. So, I tried connecting to the MySQL server with CocoMySQL (v0.5), but was refused connection. The firewall is not blocking the MySQL port. MySQL > Status shows that MySQL is running and shows root@localhost as the current user. I've tried connecting with the usernames root, admin and mysql with the password that I set in the MySQL Manager and with the passwords of the root and admin users of the server... but I cannot establish a connection via CocoMySQL. When I go to the MySQL Manager, and stop the service in order to change/ set the mysql password, but I am unable to because the verify field is not editable. Any thoughts? Thanks!

What you need to do is open the MySQL Manager in the Server folder in Applications. Click the lock to authenticate. Stop the service. Click the Allow connections box and then start the service again. That just worked for me.

I changed my apple password now i cloud sign in box keeps popping up on my I pad 2 and will not take my password

I changed my apple password from my i phone so when I tried to get on on my Ipad 2, the sign into icloud keeps popping up! It will not go away after entering the password, it doesnt say it's wrong it just keeps popping up! I have had no prolems with my iphone or my mac! I tried updating and that didnt help! Someone please help!!

The reason it won't authenticate your password is because it isn't connected to wifi. Reset it by holding the power and home buttons at the same time until you see the Apple logo, the release and wait for it to restart. As soon as it restarts, quickly go to Settings>Wi-Fi and connect it before it starts prompting you. Once it's connected to wifi, enter your password when prompted and it should take it this time.

How to change Analyzer user password with Administration API?

Hi, I would like to change Analyzer user password with Administration API. Can someone post some sample commands to do the task? I would just like to write an application to change end user's Analyzer password. As I see I would need to do the following: 1. login with admin userid/password 2. execute some method to change password for required userid. I think the input parameter should be userid (of the user I would like to change password) and new password (the new password for the user). 3. logout Can someone post some sample code (commands to execute)? Thanks, grofaty My system: Analyzer Server 7.0.1. Essbase server 7.1 Windows XP SP2 

<blockquote>quote: <hr>Originally posted by: knightrich Hello Mr. Jordan. I would like to exchange some thoughts about "housekeeping" Analyzer reports in preparation for migration from Analyzer 7.0.0.0.01472 to 9.x: ... Did you solved such a problem or do you have an idea if it could be solved with the Admin API methods? ... Migration from 7.00 to 9.x: As we heard last week the "Migration Wizard for Reports" in 9.3 should be able to migrate reports. Do you have experience or more detailed information about that Wizard? Many thanks in advance knigthrich<hr></blockquote> knighrich, I'd like to be more help, but I have no experience with System 9. I did substantial cleanup when we migrated from Analyzer 6 to Analyzer 7.1, and even more cleanup when moving up to 7.2, but our installation is smaller in scale than yours and we didn't need to automate report cleanup. You might be able to get the ownership information you need through the back door, doing a direct query on the database, but simpler might be an export users, at least from 7.0. (This facility probably doesn't exist in system 9; it was dropped in 7.2 in favor of an undocumented API) The export file is an xml file that could easily be parsed to identify reports that have the administrator as user and then a second pass to delete those with otuer ownership as well. As previously suggested, you might be able to get this by a well crafted SQL query against the repository. Procedurally, we have both public reports that have the blessing of management and are widely available, owned by a "public owner", and private reports developed by indivdual users and shared or not. Our team maintains the public reports, but not the private reports. We may be asked to make a previously private report public and take over maintenance of it. I hope that you can find a solution that meets your needs. Certainly a call to customer support to identify a poorly documented feature would be in order.

HT5622 I changed my Apple password and I get the information at the wrong email address. The correct email shows in my Apple account. Why is the mail going to the wrong email? How do I fix it?

I changed my Apple password and I get the information back at the wrong email address. My email address is right under my Apple ID. How do I get this corrected?

AWDunams wrote:
Okay so I associate the e-mail address as the apple ID and that seems to be a wrong assumption. I did go to my Apple ID and changes the e-mail address and the password but for the same and only Apple account I have ...
That is good. In that case, your one and only account has not changed, just the login credentials you use for it. All your previous purchases will remain associated with that account, and the new login.
In essence, an AppleID is an email, but it has two parts. One is the login email address and password everyone traditionally thinks of as an AppleID. But that in turn is linked to an account with Apple. As long as you use the manage Apple ID portal to just change the email address and/or password for your exisiting AppleID, then the internal account tracks along with those changes as well.
However, on your iOS devices, you will need to log out and then log back in with the new login credentials:
settings -> iTunes & App Stores - tap your AppleID, and choose log out. Then log back in with the new email address and new password.

When I try to log on to icloud it says "Apple ID is valid but not an icloud account? Changed my Apple password a few times reset my system still no luck Please help!t

When I try to log on to icloud it says "Apple ID is valid but not an icloud account? Changed my Apple password a few times reset my system still no luck Please help!t

Welcome to the Apple community.
These types of messages often indicate a problem with the devices serial number, have you had your phone repaired at any stage or did you buy it second-hand.

How to change the Default Password on AP1131AG

Hi all :
I tried to change the default password Cisco to other by command line but the password cannot work out.
The command line I used are as below :
AP#conf t
Enter configuration commands, one per line. End with CNTL/Z.
AP(config)#enable pass
AP(config)#enable password 4dMINO123 ?
LINE <cr>
AP(config)#enable password 4dMINO123
AP(config)#exit
AP#wr
*Mar 1 04:39:23.902: %SYS-5-CONFIG_I: Configured from console by console
Building configuration...
[OK]
AP#exit
This still cannot cahnge. Below I do again below commands :
AP(config)#enable secret
% Incomplete command.
AP(config)#enable secret ?
0 Specifies an UNENCRYPTED password will follow
5 Specifies an ENCRYPTED secret will follow
LINE The UNENCRYPTED (cleartext) 'enable' secret
level Set exec level password
AP(config)#enable secret 5
% Incomplete command.
AP(config)#enable secret 5 ?
LINE The ENCRYPTED 'enable' secret string
AP(config)#enable secret 5 LINE
ERROR: The secret you entered is not a valid encrypted secret.
To enter an UNENCRYPTED secret, do not specify type 5 encryption.
When you properly enter an UNENCRYPTED secret, it will be encrypted.
AP(config)#enable secret LINE
AP(config)#exit
AP#
*Mar 1 04:40:53.021: %SYS-5-CONFIG_I: Configured from console by console
AP#
AP#exit
After that when I access with >en again as below with correct password of 4dMINO123 and it always fails as below :
Can anybody help to provide correct way of changing the default password of Cisco to another password? Many thanks!
AP con0 is now available
Press RETURN to get started.
AP>en
Password:
Password:
Password:
% Bad secrets
AP>en 0
AP>en 5
% No password set
AP>en 15
Password:
Password:
% Password: timeout expired!
Password:
% Bad secrets
AP>
AP>
AP>en
Password:
Password:
Password:
% Bad secrets
thanks and best regards,
tangsuan

Hi, I have even the worst problem,
that seems probably to to be never asked on Internet. After quick learning how to reset this creapy device, I can't get by no means the enable password in default config for this box, having read everywhere from Cisco guide through community pages to Google pages.. NOWHERE.
Question is : what else except Cisco, cisco, root, password... can solve this stupid issue?!? I expect some guru from responsible AP BU to answer this with definite answer, or someone from Cisco having mercy with me to contact such guy(s).
Here is my desperate situation :
Nothing from this page helped :
http://www.cisco.com/en/US/partner/products/hw/wireless/ps430/products_password_recovery09186a00800949d0.shtml#reset_ap_newer
Situation after hard reset:
Xmodem file system is available.
flashfs[0]: 26 files, 8 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 15998976
flashfs[0]: Bytes used: 6879232
flashfs[0]: Bytes available: 9119744
flashfs[0]: flashfs fsck took 43 seconds.
Base ethernet MAC Address: 00:22:55:9f:fc:a0
Initializing ethernet port 0...
Reset ethernet port 0...
Reset done!
ethernet link up, 100 mbps, full-duplex
Ethernet port 0 initialized: link is up
button pressed for 1 seconds
process_config_recovery: set IP address and config to default 10.0.0.1
Loading "flash:/c1130-rcvk9w8-mx/c1130-rcvk9w8-mx"...#########################################################################################################################################################################
File "flash:/c1130-rcvk9w8-mx/c1130-rcvk9w8-mx" uncompressed and installed, entry point: 0x3000
executing...
 Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
 cisco Systems, Inc.
 170 West Tasman Drive
 San Jose, California 95134-1706
Cisco IOS Software, C1130 Software (C1130-RCVK9W8-M), Version 12.3(11)JX1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Mon 17-Jul-06 11:38 by alnguyen
Image text-base: 0x00003000, data-base: 0x0035E440
Initializing flashfs...
flashfs[1]: 26 files, 8 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 15998976
flashfs[1]: Bytes used: 6879232
flashfs[1]: Bytes available: 9119744
flashfs[1]: flashfs fsck took 6 seconds.
flashfs[1]: Initialization complete....done Initializing flashfs.
cisco AIR-LAP1131AG-E-K9 (PowerPCElvis) processor (revision A0) with 24566K/8192K bytes of memory.
Processor board ID FCZ1238Q0HK
PowerPCElvis CPU at 262Mhz, revision number 0x0950
Last reset from power-on
LWAPP image version 3.0.51.0
1 FastEthernet interface
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:22:55:9F:FC:A0
Part Number : 73-8962-14
PCA Assembly Number : 800-24818-13
PCA Revision Number : A0
PCB Serial Number : FOC12354426
Top Assembly Part Number : 800-29144-03
Top Assembly Serial Number : FCZ1238Q0HK
Top Revision Number : A0
Product/Model Number : AIR-LAP1131AG-E-K9
Press RETURN to get started!
*Mar 1 00:00:08.354: %CDP_PD-4-POWER_OK: Full power - AC_ADAPDOWN: Line protocol on Interface FastEthernet0, changed state to up
Press>en
Password:
Password:
Password:
*Mar 1 00:00:27.393: %LWAPP-5-CHANGED: LWAPP changed state to DISCOVERY
% Bad secrets
Press>en
Password:
Password:
Password:
% Bad secrets
Press>
*Mar 1 00:00:36.530: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned DHCP address 192.168.1.2, mask 255.255.255.0, hostname Press
Press>en
Password:
Password:
Press>sho ver
Cisco IOS Software, C1130 Software (C1130-RCVK9W8-M), Version 12.3(11)JX1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Mon 17-Jul-06 11:38 by alnguyen
ROM: Bootstrap program is C1130 boot loader
BOOTLDR: C1130 Boot Loader (C1130-BOOT-M) Version 12.3(8)JEA, RELEASE SOFTWARE (fc2)
Press uptime is 17 minutes
System returned to ROM by power-on
System image file is "flash:/c1130-rcvk9w8-mx/c1130-rcvk9w8-mx"
cisco AIR-LAP1131AG-E-K9 (PowerPCElvis) processor (revision A0) with 24566K/8192K bytes of memory.
Processor board ID FCZ1238Q0HK
PowerPCElvis CPU at 262Mhz, revision number 0x0950
Last reset from power-on
LWAPP image version 3.0.51.0
1 FastEthernet interface
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:22:55:9F:FC:A0
Part Number : 73-8962-14
PCA Assembly Number : 800-24818-13
PCA Revision Number : A0
PCB Serial Number : FOC12354426
Top Assembly Part Number : 800-29144-03
Top Assembly Serial Number : FCZ1238Q0HK
Top Revision Number : A0
Product/Model Number : AIR-LAP1131AG-E-K9
Configuration register is 0xF
Press>

How to change the default password file's name and path when the database created?

how to change the default password file's name and path when the database created?
null

Usage: orapwd file=<fname> password=<password> entries=<users>
where
file - name of password file (mand),
password - password for SYS and INTERNAL (mand),
entries - maximum number of distinct DBA and OPERs (opt),
There are no spaces around the equal-to (=) character.

I can't use my password to open icloud. I changed my apple password and it still won't work with icloud

I can't use my apple password to open icloud. I changed my apple password and still can't open icloud on my pc. What can I do or what am I doing wrong.
Thanks

Sorry to ask but... are you absolutely certain you have entered your Apple ID and account password correctly?
If you use the same Apple ID for iCloud and the iTunes store, see if you are able to log into the iTunes store from either your computer or your iPod.

How do i allow users to change their oracle password?

Please help.
I need a procedure/module in my forms6 to allow users change their oracle database passwords. I am using Oracle 8.0.6.
thanks for a reply

SEND YOUR EMAIL SO I CAN SEND YOU A COMPLETE
FORM HOW TO CHANGE THE USER PASSWORD
MARK

I recently changed my iCloud account because someone stole my last phone and changed all my passwords for both my iCloud and emails account. So when I changed my account I accedently erased all my contacts is there anything I can do? (It wasn't backup)

I recently changed my iCloud account because someone stole my last phone and changed all my passwords for both my iCloud and emails account. So when I changed my account I accedently erased all my contacts is there anything I can do? (It wasn't backup)

I'd say your best bet is to try to regain access to your old account. Call 1-800-MY-APPLE, and ask to talk to the account security team. Hopefully they can verify you are the account owner, and then reset the password for you.

HOw do you change the Apple Password ro several Apple devices wit the same user name?

I am trying to change the Apple password for four Apple devices, including an iPhone, iPad, iMac Air, and Desktop MAC. The iPhone password is corrupted so it is interfering with the synching of the four devices on the iCloud. I want to reset the password for all four devices and get them so they will synch with each other as well as the iCloud.

Hi Stew,
App Store requires 10.6.8, is the 10.5.5 you kist correct?
Antway, to change ID...
http://support.apple.com/kb/ht5621

Change Mamp MYSQL password?

Similar Messages

Maybe you are looking for